☆ 4.3 Review

Solvent Engineering of Ionic Liquids for Stable and Efficient Perovskite Solar Cells

ADVANCED ENERGY AND SUSTAINABILITY RESEARCH (2023)

Related references

Note: Only part of the references are listed.

Review Materials Science, Multidisciplinary

Ionic Liquid Engineering in Perovskite Photovoltaics

Fei Wang et al.

Summary: Over the past decade, perovskite photovoltaics have shown great promise as the most prospective type of solar cells. However, there are still debates regarding their surface degradation, mechanical robustness, and environmental impact. The application of ionic liquids appears to be a potential solution to these challenges.

ENERGY & ENVIRONMENTAL MATERIALS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

High-Polarizability Organic Ferroelectric Materials Doping for Enhancing the Built-In Electric Field of Perovskite Solar Cells Realizing Efficiency over 24%

Weijie Chen et al.

Summary: An effective method of enhancing the built-in electric field intensity in perovskite solar cells is reported in this study. By doping an organic ferroelectric material, PVDF:DH, an additional electric field is generated, promoting charge-carrier transport, perovskite growth, and improving the overall performance and stability of the solar cells.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Ionic-Liquid-Perovskite Capping Layer for Stable 24.33%-Efficient Solar Cell

Xuejie Zhu et al.

Summary: A new approach using an ionic liquid was designed to improve the stability and performance of metal-halide perovskite solar cells. Experimental results showed that this method effectively enhances the photovoltaic performance while exhibiting outstanding stability characteristics.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Oxalate Pushes Efficiency of CsPb0.7Sn0.3IBr2 Based All-Inorganic Perovskite Solar Cells to over 14%

Weihai Zhang et al.

Summary: Highly efficient and stable all-inorganic CsPb0.7Sn0.3IBr2 perovskite solar cells (PSCs) were fabricated by introducing an appropriate amount of multifunctional zinc oxalate (ZnOX), resulting in perovskite films with low defect density, high crystallinity, and superior electronic properties.

ADVANCED SCIENCE (2022)

Add to Collection

Article Energy & Fuels

Mixed Dimensional Perovskites Heterostructure for Highly Efficient and Stable Perovskite Solar Cells

Chuangye Ge et al.

Summary: The synthesis of 1D Me3SPbI3 nanoarrays in aqueous condition and their incorporation into lead halide 3D perovskites resulted in an efficient and stable heterostructural 1D/3D perovskite photoactive layer. This design achieved a PCE of 22.06% for PSCs and maintained 97% of their initial efficiency after 1000 hours of storage under ambient conditions, demonstrating promising potential for next-generation highly efficient and stable perovskite solar cells.

SOLAR RRL (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Organic Matrix Assisted Low-temperature Crystallization of Black Phase Inorganic Perovskites

Yuetian Chen et al.

Summary: All-inorganic perovskites are promising materials for perovskite solar cells and optoelectronic devices. Recent studies have shown that using an organic matrix with organic ions, polymers, and solvent molecules can promote the crystallization of black phase inorganic perovskites at low temperatures, leading to improved stability.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Stable Metal-Halide Perovskite Colloids in Protic Ionic Liquid

Hao Gu et al.

Summary: This study reveals the mechanism of forming chemically stable perovskite precursor solutions using the MAAc protic ionic liquid solvent under ambient conditions. Stable perovskite colloids are formed through intermolecular hydrogen bonds and coordination interactions in the MAAc precursor solution. The interactions result in more stable perovskite colloids compared to traditional solvents.

CCS CHEMISTRY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Manipulating Crystallization Kinetics in High-Performance Blade-Coated Perovskite Solar Cells via Cosolvent-Assisted Phase Transition

Qiong Liang et al.

Summary: By incorporating ethyl alcohol (EtOH) into perovskite ink, a facile and effective strategy for fabricating high-performance room-temperature blade-coated perovskite solar cells and modules is demonstrated in this work. Real-time perovskite crystallization studies reveal the structural evolutions and phase-transition pathway. The strategy efficiently suppresses nonradiative recombination and improves device efficiency and stability.

ADVANCED MATERIALS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Advances in SnO2 for Efficient and Stable n-i-p Perovskite Solar Cells

So Yeon Park et al.

Summary: This article reviews the key advancements in SnO2 development for perovskite solar cells, including different deposition methods and surface treatment strategies to enhance its performance. The general materials chemistry of SnO2 and the associated challenges and improvement strategies are discussed, with a focus on its impact on device characteristics. The article also highlights the applications of SnO2 in scalable processes and flexible devices, and provides perspectives on the future development of large-scale perovskite solar modules.

ADVANCED MATERIALS (2022)

Add to Collection

Article Multidisciplinary Sciences

Organic-semiconductor-assisted dielectric screening effect for stable and efficient perovskite solar cells

Haiyang Chen et al.

Summary: This paper reports a dielectric-screening-enhancement effect for perovskite defects by using organic semiconductors with finely tuned molecular structures. The resulting perovskite films exhibit high dielectric constant values, reduced charge capture regions, suppressed ion migration, and an efficient charge transport pathway, leading to improved efficiency and stability of perovskite solar cells.

SCIENCE BULLETIN (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Advance and prospect of metal-organic frameworks for perovskite photovoltaic devices

Xiao Liang et al.

Summary: The combination of MOFs and perovskite photovoltaic devices has opened up a new pathway to address stability issues and significantly enhance photovoltaic performance. MOFs can serve as an interlayer, a modifier of the interlayer, and a MOFs/perovskite heterojunction, improving device stability and efficiency.

ORGANIC ELECTRONICS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Molecular Self-Assembly Regulated Dopant-Free Hole Transport Materials for Efficient and Stable n-i-p Perovskite Solar Cells and Scalable Modules

Qinrong Cheng et al.

Summary: Researchers propose a molecular assembly strategy to improve the optoelectronic properties of organic hole transport materials (HTMs) in perovskite solar cells. The resulting cells show promising efficiency and long-term stability.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Add to Collection

Article Chemistry, Physical

Composition-Conditioning Agent for Doped Spiro-OMeTAD to Realize Highly Efficient and Stable Perovskite Solar Cells

Heyi Yang et al.

Summary: A study introduces a new HTL composition-conditioning agent (CCA) to improve the efficiency and stability of perovskite solar cells (pero-SCs) based on the doped Spiro-OMeTAD hole transport layer (HTL).

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Applied

In-depth understanding of ionic liquid assisted perovskite film formation mechanism for two-step perovskite photovoltaics

Fei Wang et al.

Summary: This study investigated the mechanism of ionic-liquid-assisted perovskite film formation using a two-step method. The research found that the introduced ionic liquid methylammonium formate (MAFa) can lower the perovskite formation enthalpy and accelerate the crystallization process. The ionic liquid can also fill up halide vacancies in perovskite crystals, resulting in reduced trap states. With the help of MAFa IL, uniform perovskite films with larger grains and lower defect density were prepared, and the corresponding device efficiency exceeded 23% with significantly improved stability.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Pyridine Derivatives' Surface Passivation Enables Efficient and Stable Carbon-Based Perovskite Solar Cells

Kai Zou et al.

Summary: Surface passivation is an effective strategy to reduce defects in perovskite solar cells. In this study, the passivation effects of pyridine and its derivatives with different functional groups were compared. Py-NH2 was found to be the best passivation agent, reducing defect density and improving conversion efficiency and long-term stability in carbon-based perovskite solar cells.

ACS MATERIALS LETTERS (2022)

Add to Collection

Article Chemistry, Physical

Recent Progress in Ionic Liquids for Stability Engineering of Perovskite Solar Cells

Fei Wang et al.

Summary: Perovskite solar cells have attracted attention for their high efficiency, absorption coefficients, tunability, and manufacturing protocols. However, long-term stability remains a challenge. Ionic liquids have been used to improve stability and performance through film evolution and modifications of photophysical properties. This review discusses the reasons for instability, strategies for stability improvement, and challenges and prospects of perovskite solar cells.

SMALL STRUCTURES (2022)

Add to Collection

Article Materials Science, Multidisciplinary

A Helical Polycycle Molecular Semiconductor for Durable and Efficient Perovskite Solar Cells

Niansheng Xu et al.

Summary: This study reports a molecular semiconductor (TBTA[6]H) based on triple aza[6]helicene, which has a fully fused conjugated backbone. The TBTA[6]H composite exhibits excellent stability and thermal degradation resistance in perovskite solar cells (PSCs).

ACS MATERIALS LETTERS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Orientation Control of 2D Perovskite in 2D/3D Heterostructure by Templated Growth on 3D Perovskite

Genya Uzurano et al.

Summary: This study demonstrates a universal strategy to improve the stability of perovskite solar cells by controlling the orientation of 2D perovskite on 3D perovskite, overcoming the trade-off between stability and PCE in 2D/3D heterostructure. The orientation angle of 2D perovskite strongly depends on the predominant crystal orientation of the 3D perovskite template.

ACS MATERIALS LETTERS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Elastic Lattice and Excess Charge Carrier Manipulation in 1D-3D Perovskite Solar Cells for Exceptionally Long-Term Operational Stability

Yu Zhan et al.

Summary: In this study, a 1D-3D mixed-dimensional perovskite material is explored to address the instability issue caused by ion migration in organic-inorganic hybrid halide perovskite solar cells. The 1D-3D perovskite shows improved stability and enhanced photovoltaic performance by suppressing ion migration and balancing charge carrier extraction.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Perovskite Quantum Wells Formation Mechanism for Stable Efficient Perovskite Photovoltaics-A Real-Time Phase-Transition Study

Hanlin Hu et al.

Summary: The study investigates the use of a combination of bulk 3D and reduced dimensional perovskite layers to enhance the performance of perovskite solar cells, achieving efficiencies exceeding 22% and significantly improving device stability by controlling the ionic reaction during organic cation coating process to optimize the PQWs/3D architecture.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Rational Surface-Defect Control via Designed Passivation for High-Efficiency Inorganic Perovskite Solar Cells

Xiaojing Gu et al.

Summary: Iodine vacancies and undercoordinated Pb2+ are the main causes of nonradiative charge recombination in all-inorganic perovskite films, while passivation with histamine (HA) significantly reduces surface trap density and prolongs charge lifetime, leading to an increased solar cell efficiency.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Physical

Surface Engineering of Ambient-Air-Processed Cesium Lead Triiodide Layers for Efficient Solar Cells

So Me Yoon et al.

Summary: Cesium lead triiodide (CsPbI3) has a desirable band gap and high thermal stability, but its power conversion efficiency (PCE) is lower than that of organic cation-based halide perovskites with identical band gaps. The PCE of CsPbI3 solar cells is mainly governed by the surface morphology and defect passivation of its thin films.

JOULE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Reducing Energy Disorder of Hole Transport Layer by Charge Transfer Complex for High Performance p-i-n Perovskite Solar Cells

Guiying Xu et al.

Summary: The study introduces a charge-transfer complex (CTC) strategy to reduce energy disorder in organic semiconductor charge-transport layers (OS-CTLs) and enhance the performance of p-i-n planar perovskite solar cells (pero-SCs).

ADVANCED MATERIALS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Solvent Engineering of the Precursor Solution toward Large-Area Production of Perovskite Solar Cells

Lingfeng Chao et al.

Summary: Solar cells based on emerging organic-inorganic hybrid perovskite materials have achieved impressive power conversion efficiency, but challenges remain in producing industrial-scale cells through solution methods. Advanced progress has been made in solvent engineering to regulate coordination and reduce toxicity of precursor solutions, showing promising prospects for future industrial production of high-performance cells.

ADVANCED MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Add to Collection

Article Chemistry, Physical

Ionic liquid reducing energy loss and stabilizing CsPbI2Br solar cells

Aili Wang et al.

Summary: The use of the ionic liquid BMIMBF4 can stabilize the CsPbI2Br phase and reduce surface defect density, leading to improvements in perovskite film quality and interfacial charge transport.

NANO ENERGY (2021)

Add to Collection

Review Engineering, Environmental

The benefits of ionic liquids for the fabrication of efficient and stable perovskite photovoltaics

Md. Shahiduzzaman et al.

Summary: This article discusses how to use ionic liquids (ILs) as additives and solvents to improve the efficiency and stability of perovskite solar cells (PSCs). By slowly crystallizing in ILs to prepare high-quality perovskite films, efficient and stable PSCs can be obtained.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

Targeted Distribution of Passivator for Polycrystalline Perovskite Light-Emitting Diodes with High Efficiency

Xuefeng Peng et al.

Summary: The study found that the BMIM+ ions of the 1-butyl-3-methylimidazolium tetrafluoroborate (BMIMBF4) ionic liquid effectively passivate the Pb-related defects in perovskite light emitting diodes, resulting in sufficient defect passivation and improved photoluminescence quantum yields and external quantum efficiency. This work demonstrates the potential of ionic liquid passivators for high efficiency PeLEDs and emphasizes the importance of passivator spatial distribution for adequate defect passivation.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Multidisciplinary Sciences

Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells

Jaeki Jeong et al.

Summary: The research introduces a new concept of using formate anion to suppress defects in metal halide perovskite films and enhance film crystallinity, leading to improved efficiency and stability of solar cells.

NATURE (2021)

Add to Collection

Article Multidisciplinary Sciences

Stabilizing black-phase formamidinium perovskite formation at room temperature and high humidity

Wei Hui et al.

Summary: A new method for synthesizing stable black-phase formamidinium lead iodide (α-FAPbI(3)) was reported, which enables the stable synthesis of α-FAPbI(3) under high temperature and humidity conditions, and maintains high efficiency under light stress.

SCIENCE (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Solvent Engineering as a Vehicle for High Quality Thin Films of Perovskites and Their Device Fabrication

Ehsan Rezaee et al.

Summary: Organic-inorganic halide perovskite solar cells have seen significant growth in power conversion efficiencies over the past decade, attributed to advances in device architecture and perovskite film fabrication. Solution-based thin film deposition techniques offer low cost and ease of manufacturing for PSCs. Solvents play a crucial role in thin film quality, impacting device performance and stability.

SMALL (2021)

Add to Collection

Review Chemistry, Physical

Ionic Liquids-Enabled Efficient and Stable Perovskite Photovoltaics: Progress and Challenges

Tingting Niu et al.

Summary: Perovskite solar cells (PSCs) benefit greatly from the use of ionic liquids (ILs), which play versatile roles in improving efficiency and stability. ILs help control film formation dynamics, chemically passivate surfaces, enhance stability, and provide innovative alternatives to traditional materials in PSCs. Advanced progress in ILs-based perovskite photovoltaics highlights the importance of ILs in achieving high-performing PSCs.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Multidisciplinary Sciences

Slot-die coating large-area formamidinium-cesium perovskite film for efficient and stable parallel solar module

Zhichun Yang et al.

Summary: This study utilized diphenyl sulfoxide (DPSO) additive to enhance the efficiency and stability of perovskite solar cells, resulting in the successful fabrication of high-efficiency solar modules.

SCIENCE ADVANCES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Chromium-Based Metal-Organic Framework as A-Site Cation in CsPbI2Br Perovskite Solar Cells

Songyang Yuan et al.

Summary: Introducing a chromium-based metal-organic framework group into inorganic CsPbIxBr3-x perovskite solar cells achieves multiple-dimensional electronic coupling in CsPbI2Br, enhancing stability and efficiency of the devices. This new paradigm addresses the stability challenge of inorganic perovskite while improving carrier transport ability.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Lead halide-templated crystallization of methylamine-free perovskite for efficient photovoltaic modules

Tongle Bu et al.

Summary: Efficient and stable perovskite layers are crucial for the commercialization of perovskite solar cells. A lead halide-templated crystallization strategy has been developed to print formamidinium-cesium lead triiodide perovskite films, achieving high-quality large-area films with controlled nucleation and growth. An unencapsulated device with 23% efficiency and excellent long-term thermal stability has been achieved, showcasing the potential for practical application in the future.

SCIENCE (2021)

Add to Collection

Article Multidisciplinary Sciences

Liquid medium annealing for fabricating durable perovskite solar cells with improved reproducibility

Nengxu Li et al.

Summary: The liquid medium annealing (LMA) technology shows promise in producing high-quality perovskite films and photovoltaic devices with improved crystal growth modulation and film uniformity. This method opens up an effective avenue for scalable and reproducible quality improvement in perovskite films and devices.

SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Air-Processed MAPbBr3 Perovskite Thin Film with Ultrastability and Enhanced Amplified Spontaneous Emission

Zhujun Wang et al.

Summary: In this study, high-quality MAPbBr(3) perovskite thin films were successfully prepared using ionic liquid solvent methylammonium acetate (MAAc), leading to excellent amplified spontaneous emission (ASE) performance. Compared to traditional solvent processing methods, the films prepared with MAAc showed better optical stability.

SMALL (2021)

Add to Collection

Article Chemistry, Physical

Low Temperature Processed Fully Printed Efficient Planar Structure Carbon Electrode Perovskite Solar Cells and Modules

Fu Yang et al.

Summary: This study presents a low-temperature fully printed perovskite solar cell production scheme using carbon as the top electrode, achieving highly efficient and stable PSCs under ambient conditions and meeting the requirements for industrial-scale production. The optimized carbon-PSCs show efficiencies exceeding 18% with enhanced stability, retaining 100% of their initial efficiency after 5000 hours in a humid atmosphere. Large-area perovskite modules with an efficiency of 15.3% are successfully obtained by optimizing femtosecond laser parameters. These results represent important progress towards the scalable production and global application of PSCs.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Organic-Inorganic Perovskite Films and Efficient Planar Heterojunction Solar Cells by Magnetron Sputtering

Bo Gao et al.

Summary: The study introduces a unique technology for preparing high-quality perovskite films via magnetron sputtering, allowing for controllable composition, solvent-free, large-area, and massive production. After optimization, high-performance perovskite films are obtained, leading to stable and reproducible PSCs with excellent power conversion efficiency.

ADVANCED SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

All-in-One Lewis Base for Enhanced Precursor and Device Stability in Highly Efficient Perovskite Solar Cells

Jun Zhu et al.

Summary: Researchers have developed a novel diphthalic anhydride-based Lewis base additive that simultaneously addresses the stability challenges of perovskite solar cell precursors and devices. The added Lewis bases show excellent interactions with cations in the precursor and perovskite crystal, improving ambient storage stability and device efficiency. The interaction between the Lewis base and cations also suppresses grain boundary defects, leading to increased efficiency in the target device.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Energy & Fuels

Antisolvent-Free Fabrication of Efficient and Stable Sn-Pb Perovskite Solar Cells

Shaoshen Lv et al.

Summary: Pb-based perovskite solar cells have shown potential in next-generation photovoltaics, and partial replacement of Pb with Sn reduces toxicity. A one-step antisolvent-free method using green solvent MAAC to fabricate high-quality Sn-Pb perovskite film achieves a champion PCE of 15.42%. Additionally, the device exhibits robust stability even after being stored in N-2 for 720 hours.

SOLAR RRL (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Ionic Liquid for Perovskite Solar Cells: An Emerging Solvent Engineering Technology

Lingfeng Chao et al.

Summary: Perovskite solar cells (PSCs) have shown comparable performance to traditional photovoltaic technologies and can be prepared using a solution method, which simplifies the film preparation process and reduces costs. However, the commonly used organic solvents present safety and environmental issues, limiting the large-scale production and stability of PSCs.

ACCOUNTS OF MATERIALS RESEARCH (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Solution-processed perovskite thin-films: the journey from lab- to large-scale solar cells

Zahra Saki et al.

Summary: This article discusses the latest developments in perovskite solar cells (PSCs) and focuses on the challenges of achieving high-efficiency PSCs. The key factors in preparing perovskite thin films and large-scale production techniques are explored, with opportunities for commercialization highlighted.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Two-Dimensional Materials for Perovskite Solar Cells with Enhanced Efficiency and Stability

Zhixiao Qin et al.

Summary: This passage discusses the achievements and challenges of metal halide perovskite materials in next-generation solar cells, as well as the promising strategy of incorporating novel materials like 2D materials to enhance the efficiency and stability of PSCs. Specific focus is given to optimizing perovskite crystallization, promoting charge transport, and passivating defects for improved device performance. Additionally, perspectives on addressing challenges in PSCs and coordinating with 2D materials for higher efficiency and stability are outlined.

ACS MATERIALS LETTERS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Potassium Thiocyanate-Assisted Enhancement of Slot-Die-Coated Perovskite Films for High-Performance Solar Cells

Fuzong Xu et al.

Summary: This study improved the crystal size and quality of slot-die-coated MAPbI(3) perovskite films by adding potassium thiocyanate (KSCN), obtaining high-quality perovskite thin films. By utilizing these optimized properties, PSCs with high power conversion efficiencies were fabricated, demonstrating excellent performance.

SMALL SCIENCE (2021)

Add to Collection

Article Energy & Fuels

Two-dimensional Ruddlesden-Popper layered perovskite solar cells based on phase-pure thin films

Chao Liang et al.

Summary: Introducing molten salt spacers can produce phase-pure quantum wells and enhance the performance of solar cells. Two-dimensional Ruddlesden-Popper layered metal-halide perovskites have better stability and optoelectronic properties compared to their three-dimensional counterparts.

NATURE ENERGY (2021)

Add to Collection

Article Optics

Efficient and stable Ruddlesden-Popper perovskite solar cell with tailored interlayer molecular interaction

Hui Ren et al.

NATURE PHOTONICS (2020)

Add to Collection

Review Chemistry, Physical

All-Inorganic Perovskite Solar Cells: Energetics, Key Challenges, and Strategies toward Commercialization

M. Bilal Faheem et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

FAPbI3-Based Perovskite Solar Cells Employing Hexyl-Based Ionic Liquid with an Efficiency Over 20% and Excellent Long-Term Stability

Seckin Akin et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Blading Phase-Pure Formamidinium-Alloyed Perovskites for High-Efficiency Solar Cells with Low Photovoltage Deficit and Improved Stability

Wu-Qiang Wu et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Tailoring Component Interaction for Air-Processed Efficient and Stable All-Inorganic Perovskite Photovoltaic

Xiaojuan Wang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Engineering, Environmental

Ionic liquids engineering for high-efficiency and stable perovskite solar cells

Xiaoyu Deng et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Review Chemistry, Multidisciplinary

High-Efficiency Perovskite Solar Cells

Jin Young Kim et al.

CHEMICAL REVIEWS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Development of Spray-Coated Perovskite Solar Cells

James E. Bishop et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Precise Control of Perovskite Crystallization Kinetics via Sequential A-Site Doping

Minchao Qin et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

In Situ Interface Engineering for Highly Efficient Electron-Transport-Layer-Free Perovskite Solar Cells

Deli Li et al.

NANO LETTERS (2020)

Add to Collection

Article Multidisciplinary Sciences

A piperidinium salt stabilizes efficient metal-halide perovskite solar cells

Yen-Hung Lin et al.

SCIENCE (2020)

Add to Collection

Article Multidisciplinary Sciences

Origin of High Efficiency and Long-Term Stability in Ionic Liquid Perovskite Photovoltaic

Lingfeng Chao et al.

RESEARCH (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Polymeric room-temperature molten salt as a multifunctional additive toward highly efficient and stable inverted planar perovskite solar cells

Shuangjie Wang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Towards commercialization: the operational stability of perovskite solar cells

Nengxu Li et al.

CHEMICAL SOCIETY REVIEWS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Isothermally crystallized perovskites at room-temperature

Kai Wang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

A Thioxanthenothioxanthene-based Hole Transporter with 2D Molecular Stacking for Efficient and Thermostable Perovskite Solar Cells

Aibin Zheng et al.

ACS MATERIALS LETTERS (2020)

Add to Collection

Article Chemistry, Physical

Rapid Aqueous Spray Fabrication of Robust NiOx: A Simple and Scalable Platform for Efficient Perovskite Solar Cells

William J. Scheideler et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Room-Temperature Molten Salt for Facile Fabrication of Efficient and Stable Perovskite Solar Cells in Ambient Air

Lingfeng Chao et al.

CHEM (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Room-Temperature Meniscus Coating of >20% Perovskite Solar Cells: A Film Formation Mechanism Investigation

Hanlin Hu et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Elucidating the dynamics of solvent engineering for perovskite solar cells

Zulqarnain Arain et al.

SCIENCE CHINA-MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Rapid Crystallization for Efficient 2D Ruddlesden-Popper (2DRP) Perovskite Solar Cells

Jian Qiu et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Encapsulation of Printable Mesoscopic Perovskite Solar Cells Enables High Temperature and Long-Term Outdoor Stability

Zhengyang Fu et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Review Chemistry, Physical

Two-dimensional materials in perovskite solar cells

Peng You et al.

MATERIALS TODAY ENERGY (2019)

Add to Collection

Review Chemistry, Physical

Recent progress in inkjet-printed solar cells

Santhosh Kumar Karunakaran et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Recent progress of inorganic perovskite solar cells

Qidong Tai et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Effect of PbI2 solution on air-preparation of perovskite solar cells for enhanced performance

Rui Li et al.

APPLIED SURFACE SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

Inkjet manipulated homogeneous large size perovskite grains for efficient and large-area perovskite solar cells

Pengwei Li et al.

NANO ENERGY (2018)

Add to Collection

Article Chemistry, Physical

Protic ionic liquid assisted solution processing of lead halide perovskites with water, alcohols and acetonitrile

Senol Oez et al.

NANO ENERGY (2018)

Add to Collection

Editorial Material Multidisciplinary Sciences

Addressing the stability issue of perovskite solar cells for commercial applications

Lei Meng et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

A smart surface with switchable wettability by an ionic liquid

Li Chang et al.

NANOSCALE (2017)

Add to Collection

Review Multidisciplinary Sciences

Promises and challenges of perovskite solar cells

Juan-Pablo Correa-Baena et al.

SCIENCE (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Application of Ionic Liquids to Energy Storage and Conversion Materials and Devices

Masayoshi Watanabe et al.

CHEMICAL REVIEWS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Efficiency-Enhanced Planar Perovskite Solar Cells via an Isopropanol/Ethanol Mixed Solvent Process

Peng Mao et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Ionic Liquid Activation of Amorphous Metal-Oxide Semiconductors for Flexible Transparent Electronic Devices

Pushpa Raj Pudasaini et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Organometal halide perovskite solar cells: degradation and stability

Taame Abraha Berhe et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection

Article Multidisciplinary Sciences

High-efficiency two-dimensional Ruddlesden-Popper perovskite solar cells

Hsinhan Tsai et al.

NATURE (2016)

Add to Collection

Article Multidisciplinary Sciences

Pure crystal orientation and anisotropic charge transport in large-area hybrid perovskite films

Namchul Cho et al.

NATURE COMMUNICATIONS (2016)

Add to Collection

Article Chemistry, Physical

Ionic Liquid Control Crystal Growth to Enhance Planar Perovskite Solar Cells Efficiency

Ji-Youn Seo et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Controllable Perovskite Crystallization by Water Additive for High-Performance Solar Cells

Xiu Gong et al.

ADVANCED FUNCTIONAL MATERIALS (2015)

Add to Collection

Article Chemistry, Physical

Direct Crystallization Route to Methylammonium Lead Iodide Perovskite from an Ionic Liquid

David T. Moore et al.

CHEMISTRY OF MATERIALS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Transformation of the Excited State and Photovoltaic Efficiency of CH3NH3PbI3 Perovskite upon Controlled Exposure to Humidified Air

Jeffrey A. Christians et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Add to Collection

Article Multidisciplinary Sciences

Compositional engineering of perovskite materials for high-performance solar cells

Nam Joong Jeon et al.

NATURE (2015)

Add to Collection

Article Chemistry, Physical

Pushing efficiency limits for semitransparent perovskite solar cells

Cesar Omar Ramirez Quiroz et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Inkjet Printing and Instant Chemical Transformation of a CH3NH3PbI3/Nanocarbon Electrode and Interface for Planar Perovskite Solar Cells

Zhanhua Wei et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)

Add to Collection

Article Chemistry, Physical

Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells

Nam Joong Jeon et al.

NATURE MATERIALS (2014)

Add to Collection

Review Optics

The emergence of perovskite solar cells

Martin A. Green et al.

NATURE PHOTONICS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.