4.3 Article

Embedding partial sulfurization of iron-cobalt oxide nanoparticles into carbon nanofibers as an efficient electrode for the advanced asymmetric supercapacitor

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

Heterogeneous cobalt polysulfide leaf-like array/carbon nanofiber composites derived from zeolite imidazole framework for advanced asymmetric supercapacitors

Wenjie Liu et al.

Summary: This article presents a novel CN-CoxSy/CNF composite material that can enhance the energy density and electrochemical properties of supercapacitors. The composite exhibits high capacity and good cycle stability, making it a potential electrode material for various batteries in the future.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Article Materials Science, Multidisciplinary

Compressible and Lightweight MXene/Carbon Nanofiber Aerogel with Layer-Strut Bracing Microscopic Architecture for Efficient Energy Storage

Yongpeng Liu et al.

Summary: This research fabricates a conductive Ti3C2Tx/carbon nanofiber (CNF) composite aerogel with a typical layer-strut bracing 3D microscopic architecture through synergistic assembly and freeze-drying process. The resulting Ti3C2Tx/CNF aerogels possess a highly ordered microporous structure with interlayered CNF, guaranteeing the stability and pliability of the composite aerogels. The fabricated Ti3C2Tx/CNF aerogel-based electrode demonstrates exceptional gravimetric specific capacitance and cycling stability, and the assembled symmetric supercapacitor delivers a high energy density. This work provides a new approach for the rational construction of 3D MXene assembly for advanced energy storage materials.

ADVANCED FIBER MATERIALS (2022)

Article Engineering, Environmental

Amorphous MoSx nanoparticles grown on cobalt-iron-based needle-like array for high-performance flexible asymmetric supercapacitor

Yan Zhao et al.

Summary: A novel flexible supercapacitor electrode material with excellent specific capacitance and cycling stability was reported in this study, showing high energy density and power density at 1 A g(-1). The self-assembled all-solid-state supercapacitor device demonstrated good flexibility without significant electrochemical properties attenuation.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Physical

Structure-tunable Mn3O4-Fe3O4@C hybrids for high-performance supercapacitor

Bin Hu et al.

Summary: By tuning the Fe content in the Fe-CNF precursor, Mn3O4-Fe3O4@C hybrids with different structures were synthesized, exhibiting enhanced capacitor performance due to their excellent conductivity and redox properties.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Chemistry, Physical

Micro-meso porous structured carbon nanofibers with ultra-high surface area and large supercapacitor electrode capacitance

He Wang et al.

Summary: A new type of carbon nanofibrous material with high specific surface area and unique porous structure has been developed, showing a supercapacitor electrode capacitance as high as 394 F g(-1). The carbon nanofibers maintain stable capacitance after 10,000 cycles of charge and discharge at 1.0 A g(-1).

JOURNAL OF POWER SOURCES (2021)

Article Energy & Fuels

Synthesis of nitrogen-doped plasma treated carbon nanofiber as an efficient electrode for symmetric supercapacitor

Gyawali Ghanashyam et al.

Summary: A nitrogen-doped plasma treated carbon nanofiber was prepared for supercapacitor applications, showing significant improvements in specific capacitance, cyclic stability, and rate capability. With nitrogen doping, the electrochemical active surface area increased by four times, leading to a high specific capacitance of 495 Fg(-1) and excellent cyclic stability and rate capability.

JOURNAL OF ENERGY STORAGE (2021)

Article Chemistry, Physical

Carbon nanofibers impregnated with Fe3O4 nanoparticles as a flexible and high capacity negative electrode for lithium-ion batteries

C. A. Velasquez et al.

Summary: The development of E-textiles relies on portable energy storage devices that maintain comfort and functionality. A flexible carbon electrode, impregnated with magnetite nanoparticles, was developed for lithium batteries and showed improved electrochemical performance. Despite a slight reduction in capacity retention at high C-rates due to lower electronic conductivity, the composite material achieved a higher initial discharge capacity and coulombic efficiency compared to pure carbon nanofibers.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Engineering, Electrical & Electronic

Controlled-synthesis of hierarchical NiCo2O4 anchored on carbon nanofibers mat for free-standing and highly-performance supercapacitors

M. Hussein El-Shafei et al.

Summary: A hybrid standalone electrode of NiCo2O4 hierarchical nanostructures anchored on CNFs mat was successfully produced for high-performance and substrate-free supercapacitors using a versatile one-step hydrothermal technique. The electrochemical performances of the assembled devices, including specific capacitance, energy, and power densities, were systematically evaluated. Increasing the loading of NiCo2O4 on the CNFs mat showed a positive impact on improving the overall electrochemical performance of the assembled supercapacitors.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)

Article Chemistry, Physical

Hierarchical Co3S4/CoS/MoS2 leaf-like nanoflakes array derived from Co-ZIF-L as an advanced anode for flexible supercapacitor

Fen Qiao et al.

Summary: Two-dimensional molybdenum sulfide has promising electrochemical properties for supercapacitors, but stacking and agglomeration issues limit its performance. A hierarchical Co3S4/CoS/MoS2 nanoflake array with optimal structure and electrochemical performance was successfully fabricated using a new technique. This bimetallic sulfide nanoflake array exhibited high specific capacitance, long cycle lifespan, and 100% Coulombic efficiency due to its unique morphology and abundance of active sites.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Engineering, Environmental

Ternary graphene-carbon nanofibers-carbon nanotubes structure for hybrid supercapacitor

Tolendra Kshetri et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Chemistry, Physical

Preparation and electrocatalytic properties of spinel CoxFe3-xO4 nanoparticles

Peng Xiong et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Article Chemistry, Physical

Simple Preparation of Porous FeCo2O4 Microspheres and Nanosheets for Advanced Asymmetric Supercapacitors

Shanshan Li et al.

ACS APPLIED ENERGY MATERIALS (2020)

Review Chemistry, Physical

Recent advances in electrospun nanofibers for supercapacitors

Jie Liang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Article Engineering, Environmental

Porous carbon for high-energy density symmetrical supercapacitor and lithium-ion hybrid electrochemical capacitors

Ping Wang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Chemistry, Multidisciplinary

Tip-Welded Ternary FeCo2S4 Nanotube Arrays on Carbon Cloth as Binder-Free Electrocatalysts for Highly Efficient Oxygen Evolution

Xueyan Hu et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Review Materials Science, Multidisciplinary

A Review on Graphene-Based Electrospun Conductive Nanofibers, Supercapacitors, Anodes, and Cathodes for Lithium-Ion Batteries

Kashif Javed et al.

CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2019)

Article Energy & Fuels

All-carbon hybrids for high performance supercapacitors

Recep Yuksel et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2018)

Article Chemistry, Physical

High-performance supercapacitors based on flower-like FexCo3-xO4 electrodes

Xueyi Guo et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Article Chemistry, Physical

Carbon nanofiber linked FeS2 mesoporous nano-alloys as high capacity anodes for lithium-ion batteries and supercapacitors

Vadahanambi Sridhar et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Article Chemistry, Multidisciplinary

Co9S8 nanoparticle-decorated carbon nanofibers as high-performance supercapacitor electrodes

Ning Zhang et al.

RSC ADVANCES (2018)

Article Nanoscience & Nanotechnology

Self-Supported FeCo2S4 Nanotube Arrays as Binder-Free Cathodes for Lithium-Sulfur Batteries

Bingshu Guo et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Nanoscience & Nanotechnology

A Wire-Shaped Supercapacitor in Micrometer Size Based on Fe3O4 Nanosheet Arrays on Fe Wire

Guohong Li et al.

NANO-MICRO LETTERS (2017)

Review Chemistry, Physical

Transition metal oxides with one-dimensional/one-dimensional-analogue nanostructures for advanced supercapacitors

Guangxun Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Article Nanoscience & Nanotechnology

A Wire-Shaped Supercapacitor in Micrometer Size Based on Fe3O4 Nanosheet Arrays on Fe Wire

Guohong Li et al.

NANO-MICRO LETTERS (2017)

Review Chemistry, Multidisciplinary

Recent Advances in Designing and Fabricating Self-Supported Nanoelectrodes for Supercapacitors

Huaping Zhao et al.

ADVANCED SCIENCE (2017)

Article Engineering, Environmental

Self-supported mesoporous FeCo2O4 nanosheets as high capacity anode material for sodium-ion battery

Qiming He et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Article Nanoscience & Nanotechnology

Electrospun Carbon Nanofibers with in Situ Encapsulated Co3O4 Nanoparticles as Electrodes for High-Performance Supercapacitors

Sara Abouali et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Article Chemistry, Multidisciplinary

Nickel- Cobalt Layered Double Hydroxide Nanosheets for High- performance Supercapacitor Electrode Materials

Hao Chen et al.

ADVANCED FUNCTIONAL MATERIALS (2014)

Article Chemistry, Physical

A general approach for fabrication of nitrogen-doped graphene sheets and its application in supercapacitors

Dewei Wang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2014)

Article Chemistry, Physical

Chemical synthesis of spinel cobalt ferrite (CoFe2O4) nano-flakes for supercapacitor application

V. S. Kumbhar et al.

APPLIED SURFACE SCIENCE (2012)