☆ 4.7 Article

Assessment of the post-dynamic recrystallization effects on the overall dynamic recrystallization kinetics in a Ni-base superalloy

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Deformation twinning during high temperature compression tests of the Ni-base superalloy ATI 718Plus®

Christiane Kienl et al.

Summary: This study discusses the deformation mechanisms during high temperature compression tests of the Ni-base superalloy ATI 718Plus (R). Deformation twins were observed in deformed grains at various temperatures and strain rates using transmission electron microscopes (TEM). The low stacking fault energy of the alloy was found to cause the formation of deformation twins. Additionally, early stages of twin formation were captured, including emission of twinning partials from grain boundaries and the formation of partials through cross-slip events.

ACTA MATERIALIA (2022)

Add to Collection

Article Materials Science, Multidisciplinary

The Effect of Grain Boundary Carbides on Dynamic Recrystallization During Hot Compression of Ni-Based Superalloy Haynes 282™

Emil Eriksson et al.

Summary: This study examines the effect of grain boundary carbides on dynamic recrystallization during hot compression of Ni-base superalloy Haynes 282, and indicates that carbides do not significantly influence the process. The carbide solvus temperature is not a critical limit during thermomechanical processes as well.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2022)

Add to Collection

Review Multidisciplinary Sciences

Materials for Indian Space Program: An Overview

S. V. S. Narayana Murty et al.

Summary: This article introduces the development and localization of key materials and products in the Indian space program, as well as the efforts in producing aerospace quality metallic materials and functional materials in the past five decades. The article also discusses the recent advances and future directions in aerospace materials and manufacturing.

JOURNAL OF THE INDIAN INSTITUTE OF SCIENCE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Unusual substructure evolution and post-dynamic recrystallization effects on flow softening mechanism in a ?'-free Co-base superalloy

Abhinav Kumar Karnati et al.

Summary: This study investigated the substructural evolution during hot compression of Co-22Cr-22Ni-14W-2Fe-0.1C superalloy and found the absence of any previous report on stacking fault energy (SFE) estimate and post-dynamic recrystallization (PDRX) effects at temperatures > 1000 °C. The results showed that continuous dynamic recrystallization is the dominant flow softening mechanism in low SFE alloy, while the presence of higher stored energy and recrystallized nuclei triggered significant increases in the recrystallized fraction at 1100 °C.

MATERIALIA (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Hot Deformation Behavior and Dynamic Recrystallization Nucleation Mechanisms of Inconel 625 during Hot Compressive Deformation

Zhi Jia et al.

Summary: The high-temperature compression deformation behavior of Inconel 625 alloy was investigated through hot compression tests, revealing that the optimum condition for plastic deformation is at temperatures higher than 1050 degrees C with a strain rate of 1 to 10 s(-1). The characterization of hot compression microstructure evolution using EBSD and TEM techniques showed different dynamic recrystallization mechanisms under varying compression deformation conditions, with CDRX dominating at lower temperatures and DDRX with a bulging boundary induced by twinning dominating at higher temperatures. These findings provide a theoretical basis for optimizing the thermoplastic processing of nickel-based superalloys.

ADVANCED ENGINEERING MATERIALS (2021)

Add to Collection

Article Microscopy

Adaptive domain misorientation approach for the EBSD measurement of deformation induced dislocation sub-structures

Pauli Lehto

Summary: A novel domain misorientation approach is introduced in the current work, which can resolve sub-grains and dislocation cells using conventional EBSD, leading to an increase in level of detail resolved. The method grows measurement domains radially until a specified misorientation value has been reached, enabling local misorientation analysis within individual sub-grains and dislocation cells. Sub-structural boundaries are classified based on the total misorientation, with thickness ranging from approximately one hundred nanometres to several hundred nanometres.

ULTRAMICROSCOPY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Dynamic and Post-Dynamic Recrystallization of Haynes 282 below the Secondary Carbide Solvus

Emil Eriksson et al.

Summary: The study focused on the effect of process parameters on dynamic and post-dynamic recrystallization during hot compression of Ni-base superalloy Haynes 282, with strain rate identified as the governing factor. During a 90-second post-deformation hold, significant changes in microstructure were observed, including grain growth and an increasing fraction of twin boundaries.

METALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Analysis of strain-induced precipitates by delta-processing in Inconel 718 superalloy

Pedro Jacinto Paramo-Kanetas et al.

Summary: Delta-Processing is used to control grain growth during hot deformation of the Ni-base superalloy Inconel 718. This study investigates the precipitation of M23C6 carbides and their interaction with recrystallization phenomena after the alloy has been saturated with delta-phase. Double-strain hot compression tests were conducted to analyze the softening/hardening progress over time, with microstructural characterization using SEM and XRD to identify precipitating/dissolving phases.

MATERIALS CHARACTERIZATION (2021)

Add to Collection

Article Chemistry, Physical

Investigation on the meta-dynamic recrystallization behavior of Inconel 718 superalloy in the presence of δ phase through a modified cellular automaton model

Fuxiang Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Chemistry, Physical

Investigation on the influences of δ phase on the dynamic recrystallization of Inconel 718 through a modified cellular automaton model

Fuxiang Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

High Temperature Tensile Behavior of a Nickel-Based Superalloy 55Ni-17Cr-12Fe-9Mo-2Nb-1.5Al Used in Launch Vehicle Applications

P. Manikandan et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Spheroidization Mechanism of Lamellar δ Phase in Inconel 718 during Delta Processing

Hong-yan Gan et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Understanding the Hot Working Behavior of a Ni-Base Superalloy XH 67 via Processing Map Approach

N. T. B. N. Koundinya et al.

MATERIALS PERFORMANCE AND CHARACTERIZATION (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of strain rate on subsolvus dynamic and post-dynamic recrystallization kinetics of Inconel 718

A. Nicolay et al.

ACTA MATERIALIA (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Correlating Hot Deformation Parameters with Microstructure Evolution During Thermomechanical Processing of Inconel 718 Alloy

Chirag Gupta et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)

Add to Collection

Article Microscopy

Discrimination of dynamically and post-dynamically recrystallized grains based on EBSD data: application to Inconel 718

A. Nicolay et al.

JOURNAL OF MICROSCOPY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

A critical evaluation on efficacy of recrystallization vs. strain induced boundary migration in achieving grain boundary engineered microstructure in a Ni-base superalloy

T. S. Prithiv et al.

ACTA MATERIALIA (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Hot workability integrating processing and activation energy maps of Inconel 740 superalloy

Mingjia Wang et al.

MATERIALS TODAY COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Physical

Effect of hot deformation on γ and δ phase precipitation of Inconel 718 alloy during deformation&isothermal treatment

Hongjun Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

A Comparative Study on the Hot Working Behavior of Inconel 718 and ALLVAC 718 Plus

Amir Momeni et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)

Add to Collection

Article Materials Science, Multidisciplinary

In Situ Characterization of Inconel 718 Post-Dynamic Recrystallization within a Scanning Electron Microscope

Meriem Zouari et al.

METALS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Processing and Characterization of Sub-delta Solvus Forged Hemispherical Forgings of Inconel 718

S. Chenna Krishna et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Characterization of Strain-Induced Precipitation in Inconel 718 Superalloy

Jessica Calvo et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Mean field modelling of dynamic and post-dynamic recrystallization during hot deformation of Inconel 718 in the absence of δ phase particles

Meriem Zouari et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Dynamic recrystallization mechanisms and twining evolution during hot deformation of Inconel 718

M. Azarbarmas et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection

Review Materials Science, Multidisciplinary

A review of dynamic recrystallization phenomena in metallic materials

K. Huang et al.

MATERIALS & DESIGN (2016)

Add to Collection

Review Materials Science, Multidisciplinary

Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions

Taku Sakai et al.

PROGRESS IN MATERIALS SCIENCE (2014)

Add to Collection

Review Materials Science, Multidisciplinary

A Review of Strain Analysis Using Electron Backscatter Diffraction

Stuart I. Wright et al.

MICROSCOPY AND MICROANALYSIS (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Deformation characteristics of delta phase in the delta-processed Inconel 718 alloy

H. Y. Zhang et al.

MATERIALS CHARACTERIZATION (2010)

Add to Collection

Article Microscopy

Evaluation of intragranular misorientation parameters measured by EBSD in a hot worked austenitic stainless steel

D. Jorge-Badiola et al.

JOURNAL OF MICROSCOPY (2007)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of the δ phase on the hot deformation behavior of Inconel 718

H Yuan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructural modeling of metadynamic recrystallization in hot working of IN 718 superalloy

SC Medeiros et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.