Journal
ULTRAMICROSCOPY
Volume 254, Issue -, Pages -Publisher
ELSEVIER
DOI: 10.1016/j.ultramic.2023.113832
Keywords
AFM; Tapping mode; Phase shift; Polymer; Surface damage
Categories
Ask authors/readers for more resources
This study investigates the use of phase shift as a sensitive measure for nondestructive surface morphology measurement using an atomic force microscope. The research found that phase shift can signify the transition from nondestructive to destructive measurement, providing valuable insights for surface characterization.
The morphology measurement of a surface can be done by using an atomic force microscope (AFM). However, it is difficult to ensure that the measurement does not introduce any damage to the sample surface. This paper proposes that phase shift, the phase change between the original surface and scanned area, can provide a characteristic signal of the tip-surface interaction. On a poly (methyl methacrylate) thin film, the present investigation explored the relationship between phase shift and nondestructive surface morphology measurement under the tapping mode of an AFM. The study showed that when the drive amplitude was doubled, the phase shift reached from 0.47 degrees to 1.85 degrees. Under this condition, wrinkles became observable. With the tip radius in the range of 15-20 nm, no phase shift appeared between a scanned area and the original surface after multiple measurements. In this case, the tip-surface energy dissipation was in the range of 10-35 eV, showing a nondestructive interaction of the surface with the AFM tip. When the tip radius was about 55 nm, under the same tip excitation parameters, the energy dissipation per tap varied from 60 to 110 eV, and a phase shift occurred in the range of 0.02-0.64 degrees, while the surface plastic deformation was still extremely minor after multiple tip scanning. A higher phase shift was occurred on the softer surface attributed to multiple scanning under tapping mode. The study found that the phase shift characteristics was a more sensible measure to signify the transition from a nondestructive to a destructive surface morphology measurement by using the tapping mode of an AFM.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available