☆ 4.7 Article

Constructing protic porous ionic liquids via one-step coupling neutralization reaction for extraction-adsorption coupled desulfurization

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Engineering polyhedral high entropy oxide with high-index facets via mechanochemistry-assisted strategy for efficient oxidative desulfurization

Chang Deng et al.

Summary: In this study, a unique 26-faceted polyhedral high entropy oxide catalyst with highly active site exposure was fabricated using a mechanochemistry-assisted strategy. The catalyst exhibited more oxygen vacancies and the high-index facets facilitated the adsorption and activation of oxygen, leading to significantly enhanced oxidation activity of organic sulfides.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

Add to Collection

Article Energy & Fuels

Ionic Liquid Promotes High Dispersion of V2O5 on 3D Porous g-C3N4 Carrier to Enhance Catalytic Oxidative Desulfurization Performance

Suhang Xun et al.

Summary: In this study, supported catalysts V2O5/3D g-C3N4 were prepared using a solvothermal method and programmed calcination, with a vanadium-based ionic liquid (V-IL) [(C8H17)3NCH3]3H3V10O28 as the vanadium source and 3D porous carbon nitride (3D g-C3N4) as the carrier. The use of V-IL promoted the high dispersion of V2O5 on the carrier and effectively avoided agglomeration. As a result, the catalytic oxidative desulfurization activity of V2O5/3D g-C3N4 was greatly enhanced, reducing the content of dibenzothiophene in model oil to 1.2 ppm under appropriate conditions. The recycling capacity and the possible process of oxidative desulfurization were also discussed.

ENERGY & FUELS (2023)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Group IIIA Single-Metal Atoms Anchored on Hexagonal Boron Nitride for Selective Adsorption Desulfurization via S-M Bonds

Hongshun Ran et al.

Summary: In recent years, single-atom adsorbents (SAAs) have attracted extensive research interest as a novel class of adsorption materials with maximized atom utilization and uniform isolated adsorption sites. However, gaining a fundamental understanding of the complex behaviors of SAAs for adsorbing thiophenic compounds (THs) remains challenging. This work systematically investigates the mechanisms of adsorption desulfurization (ADS) over single group IIIA metal atoms (Ga, In, and Tl) anchored on hexagonal boron nitride nanosheets (BNNSs) through density functional theory (DFT) calculations. The results reveal the stabilities, substitution preferences, and enhanced adsorption capacities of SAAs for THs, providing insights for the design and application of SAAs in the field of ADS.

INORGANIC CHEMISTRY (2023)

Add to Collection

Article Chemistry, Physical

Oxygen vacancy regulation strategy in V-Nb mixed oxides catalyst for enhanced aerobic oxidative desulfurization performance

Haofeng Chen et al.

Summary: This article proposes an oxygen vacancies (OVs) regulation strategy to enhance the catalytic activity of bimetallic oxide for oxidative desulfurization of fuel. By synthesizing V-Nb mixed oxide with different crystal phases, it was found that the tetragonal V-Nb mixed oxide (T-VNbOx) has lower OVs formation energy and larger OVs concentration, leading to significantly improved catalytic activity and cycling stability for ultra-deep oxidative desulfurization.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

Add to Collection

Article Engineering, Chemical

Cu-doped BCN nanofibers for highly selective adsorption desulfurization through S-Cu coordination and π-π interaction

Yuan Zhang et al.

Summary: A series of BCN nanofibers doped with Cu(I) adsorption sites (BCN-Cu-X, X = 0.02, 0.04, 0.06, 0.08 mmol) were successfully fabricated via a simple one-pot pyrolysis method. BCN-Cu-0.04 exhibited significantly higher adsorption capacity for DBT compared to BCN, and also showed high ADS performance for the refractory sulfur compound 4,6-DMDBT. DFT calculations revealed that the enhanced performance of BCN-Cu-X in ADS is attributed to the p-p interaction and newly formed S-Cu coordination bond.

SEPARATION AND PURIFICATION TECHNOLOGY (2023)

Add to Collection

Review Chemistry, Multidisciplinary

Shining Light on Porous Liquids: From Fundamentals to Syntheses, Applications and Future Challenges

Dechao Wang et al.

Summary: Porous liquids (PLs), a new type of flowing liquid materials combining the advantages of porous solids and flowing liquids, have gained significant attention since 2007. This critical review comprehensively summarizes the progress in fundamental chemistry, developmental history, synthetic strategies, and emerging applications of PLs. By analyzing challenging characterization issues and reviewing the latest applications, this study aims to inspire scientific communities focusing on specialized materials for various applications.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Rational Design of Caprolactam-Based Deep Eutectic Solvents for Extractive Desulfurization of Diesel Fuel and Mechanism Study

Lixian Xu et al.

Summary: In this study, a novel DES based on caprolactam and tetrabutylammonium bromide was prepared and showed high desulfurization efficiency of 96.6% in diesel fuel. The extraction mechanism was investigated using spectroscopy techniques.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Straightforward construction of amino-functionalized ILs@SBA-15 catalysts via mechanochemical grafting for one-pot synthesis of cyclic carbonates from aromatic olefins and CO2

Guangcai Long et al.

Summary: In this study, an effective and straightforward strategy for the synthesis of amino-functionalized ILs@SBA-15 catalysts was proposed via mechanochemical grafting. The as-prepared catalysts exhibited impressive catalytic activity for the one-pot synthesis of cyclic carbonates from olefins and CO2 under metal-and cocatalyst-free conditions. The catalyst could be easily recovered without significant decrease in catalytic activity after multiple cycles. Additionally, a possible catalytic mechanism of the oxidative carboxylation reaction of olefins was proposed based on the results of the control experiment.

JOURNAL OF CO2 UTILIZATION (2022)

Add to Collection

Article Chemistry, Physical

Insights into the formation mechanism of aliphatic acid-choline chloride deep eutectic solvents by theoretical and experimental research

Jinrui Zhang et al.

Summary: In this study, seven aliphatic acid-choline chloride deep eutectic solvents (AA-ChCl DESs) were successfully prepared and their formation mechanism was investigated using density functional theory (DFT) calculations and spectroscopy. The liquid formation of the AA-ChCl DESs primarily relies on hydrogen bonding interactions, particularly the O-H···Cl interaction. The strength of the O-H···Cl interaction decreases with increasing alkyl chain length, resulting in a gradual decrease in the formation ability of AA-ChCl DESs. This work provides valuable insights for the design and potential applications of DESs.

JOURNAL OF MOLECULAR LIQUIDS (2022)

Add to Collection

Article Chemistry, Physical

Atomic Cu and Ni anchoring on h-BN for O2 activation and subsequent oxidative desulfurization

Naixia Lv et al.

Summary: Using density functional theory, we investigated the rational design of single transition metal atoms anchored on boron nitride monolayer. Both B-vacancy and N-vacancy were found to be good sites for trapping Cu and Ni atoms. TM/V-N and TM/h-BN systems showed high catalytic activity for O-2 activation and subsequent oxidative desulfurization reactions. Considering stability, TM/V-N is expected to be a good catalyst for the ODS process.

CATALYSIS COMMUNICATIONS (2022)

Add to Collection

Article Chemistry, Physical

Enhanced Oxygen Activation Achieved by Robust Single Chromium Atom-Derived Catalysts in Aerobic Oxidative Desulfurization

Wei Jiang et al.

Summary: By using single-atom chromium catalysts on multiwalled carbon nanotubes, efficient oxidative desulfurization reactions have been achieved, with promising catalytic performance and cycling stability, providing a potential catalyst for sulfur removal in practical fuels.

ACS CATALYSIS (2022)

Add to Collection

Review Engineering, Chemical

Porous liquids for gas capture, separation, and conversion: Narrowing the knowing-doing gap

Jie Yin et al.

Summary: This review highlights the research progress in the field of gas capture, separation, and conversion using porous liquids and focuses on the synthesis methods and absorption-separation mechanisms of porous liquids at the molecular level.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Tungstovanadate-Based Ionic Liquid Catalyst [C2(MIM)2]2VW12O40 Used in Deep Desulfurization for Ultraclean Fuel with Simultaneous Recovery of the Sulfone Product

Xiao-Xiao Xing et al.

Summary: A new tungstovanadate compound has been prepared and converted into an ionic liquid catalyst, which shows high efficiency in sulfur removal and sulfone product selectivity in an oxidative desulfurization system. The structure-activity relationship and desulfurization mechanism of this catalyst have been studied theoretically and experimentally.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Amino-Functionalized Ionic-Liquid-Grafted Covalent Organic Frameworks for High-Efficiency CO2 Capture and Conversion

Meilin Yin et al.

Summary: The integration of NH2-IL onto channel walls of mesoporous covalent organic framework materials results in higher CO2 capture activity and improved cycloaddition reaction rate. The [AeImBr]X%-TAPT-COFs possess excellent stability and cycle life.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Chemistry, Physical

Dual stimuli-responsive porous ionic liquids with reversible phase transition behavior based on ionic liquid crystals for CO2 and C2H4 adsorption

Xiaoqian Li et al.

Summary: This study demonstrates a generalizable strategy to construct stimuli-responsive porous ionic liquids by self-assembling responsive ionic liquid crystals and metal-organic frameworks. The resulting porous ionic liquids exhibit rapid reversible transition behaviors and increased adsorption capacity for CO2 and C2H4. The stimuli-responsiveness of the porous ionic liquids can be demonstrated through changes in their phase, porosity, gas adsorption, and separation.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection

Article Biochemical Research Methods

Theoretical prediction of the SO2 absorption by hollow silica based porous ionic liquids

Jie Yin et al.

Summary: The absorption mechanism of SO2 by porous ionic liquids was studied through DFT, revealing the strongest adsorptive interaction between the canopy and silica sphere, with hydrogen bonding and at-hole bonding as the main forces. Increasing the degree of polymerization of the canopy, by increasing the number of ether groups, is beneficial to SO2 absorption.

JOURNAL OF MOLECULAR GRAPHICS & MODELLING (2021)

Add to Collection

Article Chemistry, Physical

Defect Engineering on Boron Nitride for O2 Activation and Subsequent Oxidative Desulfurization

Naixia Lv et al.

Summary: This study improves the catalytic activity of hexagonal boron nitride catalysts for aerobic reactions by doping impurity atoms, especially showing higher activation on defects containing oxygen-nitrogen and nitrogen-boron. The subsequent application in oxidative desulfurization reactions indicates that O-N and C doped systems are good choices.

CHEMPHYSCHEM (2021)

Add to Collection

Article Energy & Fuels

In situ fabrication of hollow silica confined defective molybdenum oxide for enhanced catalytic oxidative desulfurization of diesel fuels

Wei Jiang et al.

Summary: In this study, a hollow silica confined defective molybdenum oxide catalyst was successfully prepared, demonstrating higher activity and desulfurization efficiency compared to a solid silica-supported catalyst. Oxygen defects were found to play a positive role in promoting oxidation reactions, and the catalyst exhibited good stability and selectivity, making it a promising candidate for industrial applications.

FUEL (2021)

Add to Collection

Review Energy & Fuels

Ionic liquid-assisted refinery processes-A review and industrial perspective

Haifa Ben Salah et al.

Summary: Petroleum refining, a key technology for global economic development, continues to seek improvements in process efficiency, environmental impact reduction, and cost savings. Recent focus has been on utilizing ionic liquids for desulfurization, denitrogenation, and alkylation processes. Overcoming challenges is essential to scale up the industrial use of ionic liquid-based refinery technology.

FUEL (2021)

Add to Collection

Article Chemistry, Physical

Synthesis, structure-properties relationship and biodegradability assessment of novel protic ionic liquids

Dimitrios Skarpalezos et al.

Summary: This study presents the design, synthesis, and biodegradability assessment of 14 protic ionic liquids (PILs), with nine of them being newly introduced in the bibliography. The physicochemical properties, thermal behavior, and viscosity of two important PILs were studied, along with the discussion on how the structural features of PILs ions impact these properties.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Add to Collection

Article Chemistry, Physical

Theoretical insights into CO2/N2 selectivity of the porous ionic liquids constructed by ion-dipole interactions

Jie Yin et al.

Summary: Porous liquids, with solid pores and liquid properties, show excellent advantages in gas absorption, while lacking understanding of absorption mechanism at the molecular level. The formation of porous liquids made of porous organic cages dissolved in crown ether is influenced by ion-dipole interactions with alkali metals. Crown ethers interact with alkali metals to form metal complexes, driven by electrostatic interactions rather than coordination effects.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Acidic Ionic Liquids Enabling Intermediate Temperature Operation Fuel Cells

Hui Hou et al.

Summary: This study demonstrates that certain protic ionic liquids show promising electrolyte performance in the temperature range of 100-120 degrees Celsius. In particular, [DEMSPA][TfO] and [DESPA][TfO] electrolytes exhibit high limiting current densities for the oxygen reduction reaction on platinum electrodes.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Engineering Permanent Porosity into Liquids

Kecheng Jie et al.

Summary: This article discusses the concept of porous liquids and their potential applications in the chemical industry, focusing on early reports of successful construction of porous liquids based on existing porous scaffolds. It pays particular attention to design strategies and structure-property relationships.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

High-Performance Porous Ionic Liquids for Low-Pressure CO2 Capture**

Jocasta Avila et al.

Summary: Porous ionic liquids based on ZIF-8 and phosphonium salts show increased carbon dioxide absorption capacity at low pressures. By combining MOFs with ionic liquids, the absorption of carbon dioxide can be greatly enhanced, leading to the development of high-performance liquid materials for effective low pressure carbon capture.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Engineering, Chemical

Low viscosity superbase protic ionic liquids for the highly efficient simultaneous removal of H2S and CO2 from CH4

Wenjie Xiong et al.

Summary: Four superbase protic ionic liquids (SPILs) were prepared for natural gas sweetening in this study, showing low viscosity and high solubility of H2S at low temperatures. These SPILs have the potential to be alternative candidates for the simultaneous removal of H2S and CO2 in natural gas upgrading.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Engineering, Environmental

Dynamically-generated TiO2 active site on MXene Ti3C2: Boosting reactive desulfurization

Jing He et al.

Summary: Ti3C2 MXene with dynamically-generated TiO2 active site shows enhanced catalytic oxidative desulfurization performance, attributed to its abundant interface engineering and loosely layered structure. The expanded slit layer in Ti3C2 MXene provides more pores and cavities for accelerated mass transfer, leading to efficient removal of sulfides in diesel. Additionally, the dynamically-generated active sites from continuous activation of molecular oxygen and Ti3C2 MXene play a key role in enhancing the catalytic activity.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Energy & Fuels

Quaternary Ammonium Salts-Based Deep Eutectic Solvents: Utilization in Extractive Desulfurization

Naushad Khan et al.

Summary: In this study, three deep eutectic solvents (DESs) were synthesized and utilized for extractive desulfurization (EDS), with a maximum sulfur extraction efficiency of 81.2% achieved under optimized conditions. The recyclability of DES affected the extraction efficiency, which was restored after regeneration. EDS kinetics were represented using pseudo first-, second-, and nth-order models.

ENERGY & FUELS (2021)

Add to Collection

Article Energy & Fuels

Desulfurization of diesel fuel by one-pot method with morpholinium-based Bronsted acidic ionic liquid

Guojia Yu et al.

Summary: Ionic liquids (ILs) are efficient green solvents for thiophene sulfides removal. In this study, several acidic ILs were synthesized and [NFM][TFA] showed excellent desulfurization efficiency. Through a proposed mechanism, [NFM][TFA] reacted with H2O2 to oxidize DBT in IL phase to corresponding sulfones.

FUEL (2021)

Add to Collection

Article Energy & Fuels

Extraction desulphurization of fuels using ZIF-8-based porous liquid

Jimin Wu et al.

Summary: The ZIF-8-PILs demonstrated high removal efficiencies for thiophene and benzothiophene under optimal conditions and can be easily recovered and reused due to their stable liquid porous structure. The synergistic effects of electrostatic interactions, hydrogen bonding, and pi-complexation interactions among ILs, ZIF-8, and sulfur compounds contributed to the high removal efficiency. The results suggest that PILs are a new and promising extractant for fuel extraction desulfurization process.

FUEL (2021)

Add to Collection

Article Chemistry, Physical

Extractive desulfurization of diesel fuel by amide-based type IV deep eutectic solvents

Lixian Xu et al.

Summary: A novel amide-based deep eutectic solvent (DES) was synthesized and applied for desulfurization of fuels, showing high efficiency. Experimental and theoretical studies revealed the mechanism of desulfurization by this DES.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Add to Collection

Article Engineering, Mechanical

Tribological performance of low viscosity halogen-free ammonium based protic ionic liquids with carboxylate anions as neat lubricants

Ghassan M. J. Al Kaisy et al.

Summary: The study found that the group of protic ionic liquids as lubricants can significantly reduce the friction coefficient of steel-steel interfaces, with the salicylate protic ionic liquid showing the lowest friction coefficient. Additionally, the 2-naphthoate and salicylate protic ionic liquids in the lubricants exhibited lower wear values compared to polyalphaolefin in the wear test.

TRIBOLOGY INTERNATIONAL (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Hollow Silica-Based Porous Liquids Functionalized Mixed Matrix Membranes for CO2 Capture

Shuo Liu et al.

Summary: Porous liquids (PLs) have shown great potential in gas capture, and using them as fillers in mixed matrix membranes (MMMs) for CO2 separation is a promising approach. The liquid-like property of PLs allows for excellent filler dispersion, fast permeation diffusion channels, and superior CO2 selectivity. Molecular simulation confirms the improved interaction between gas molecules and membrane with the incorporation of PLs.

CHEMISTRYSELECT (2021)

Add to Collection

Article Chemistry, Applied

Pt nanoparticles encapsulated on V2O5 nanosheets carriers as efficient catalysts for promoted aerobic oxidative desulfurization performance

Chao Wang et al.

Summary: In this study, Pt nanoparticles with sizes around 4-5 nm were effectively encapsulated on vanadium pentoxide nanosheets, resulting in a catalyst with excellent catalytic aerobic oxidation performance for deep desulfurization. The catalysts were able to be reused at least seven times, showing great potential for practical applications.

CHINESE JOURNAL OF CATALYSIS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Transforming Porous Organic Cages into Porous Ionic Liquids via a Supramolecular Complexation Strategy

Kecheng Jie et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Coordination cages as permanently porous ionic liquids

Lillian Ma et al.

NATURE CHEMISTRY (2020)

Add to Collection

Article Engineering, Chemical

Extractive desulfurization of fuels using trialkylamine-based protic ionic liquids

Qiang Wang et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Fast heterogeneous oxidative desulfurization of dibenzothiophene from ionic liquids supported urchin-liked meso-silica

Jinrui Zhang et al.

MATERIALS EXPRESS (2020)

Add to Collection

Article Engineering, Chemical

Effects of ionicity and chain structure on the physicochemical properties of protic ionic liquids

Yuyan Deng et al.

AICHE JOURNAL (2020)

Add to Collection

Article Engineering, Environmental

Synergistic effect of dual Br?nsted acidic deep eutectic solvents for oxidative desulfurization of diesel fuel

Wei Jiang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Engineering, Chemical

Thermophysical Properties of Newly Synthesized Ammonium-Based Protic Ionic Liquids: Effect of Temperature, Anion and Alkyl Chain Length

Nur Hidayah Zulaikha Othman Zailani et al.

PROCESSES (2020)

Add to Collection

Article Multidisciplinary Sciences

A study of the desulfurization selectivity of a reductive and extractive desulfurization process with sodium borohydride in polyethylene glycol

Xianglong Meng et al.

SCIENTIFIC REPORTS (2020)

Add to Collection

Article Engineering, Chemical

Investigation of Kraft Lignin Solubility in Protic Ionic Liquids and Their Aqueous Solutions

Rafael M. Dias et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

Add to Collection

Article Engineering, Chemical

Fuel oil desulfurization with dual functionalized imidazolium based ionic liquids

Hussain Shakeel Butt et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Porous Liquids: The Next Frontier

Pasquale Fernando Fulvio et al.

CHEM (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Unraveling the mechanism of CO2 capture and separation by porous liquids

Jie Yin et al.

RSC ADVANCES (2020)

Add to Collection

Article Biochemical Research Methods

The interaction nature between hollow silica-based porous ionic liquids and CO2: A DFT study

Jinrui Zhang et al.

JOURNAL OF MOLECULAR GRAPHICS & MODELLING (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Insights into the Hydrogen Bond Interactions in Deep Eutectic Solvents Composed of Choline Chloride and Polyols

Huiyong Wang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Deep Desulfurization of Fuels Using Imidazole Anion-Based Ionic Liquids

Zhongqi Ren et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Chemistry, Physical

The mechanism of thiophene oxidation on metal-free two-dimensional hexagonal boron nitride

Naixia Lv et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2019)

Add to Collection

Article Chemistry, Applied

Eco-friendly polyvinyl alcohol/carboxymethyl cellulose hydrogels reinforced with graphene oxide and bentonite for enhanced adsorption of methylene blue

Hongjie Dai et al.

CARBOHYDRATE POLYMERS (2018)

Add to Collection

Article Energy & Fuels

Performance and mechanism for extractive desulfurization of fuel oil using modified polyethylene glycol

Jiajun Gao et al.

FUEL (2018)

Add to Collection

Article Materials Science, Paper & Wood

The self-assembly and formation mechanism of a novel cellulose gel with chiral nematic structure

Huafeng Peng et al.

CELLULOSE (2018)

Add to Collection

Article Chemistry, Physical

Effect of Pore Size on the Carbon Dioxide Adsorption Behavior of Porous Liquids Based on Hollow Silica

Ting Shi et al.

CHEMPHYSCHEM (2018)

Add to Collection

Article Energy & Fuels

Extractive desulfurization of liquid fuel by using a green, neutral and task specific phosphonium ionic liquid with glyceryl moiety: A joint experimental and computational study

Fatemeh Rafiei Moghadam et al.

FUEL (2017)

Add to Collection

Article Engineering, Environmental

Green fuel through green route by using a task-specific and neutral 0 CrossMark phosphonium ionic liquid: A joint experimental and theoretical study

Fatemeh Rafiei Moghadam et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Add to Collection

Article Engineering, Environmental

Adsorption of anionic and cationic dyes from aqueous solution using gelatin-based magnetic nanocomposite beads comprising carboxylic acid functionalized carbon nanotube

Samaneh Saber-Samandari et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Add to Collection

Article Engineering, Chemical

The Selectivity for Sulfur Removal from Oils: An Insight from Conceptual Density Functional Theory

Hongping Li et al.

AICHE JOURNAL (2016)

Add to Collection

Article Chemistry, Applied

Enhanced mechanical, thermal and antimicrobial properties of poly(vinyl alcohol)/graphene oxide/starch/silver nanocomposites films

Adil Usman et al.

CARBOHYDRATE POLYMERS (2016)

Add to Collection

Article Engineering, Environmental

A task-specific phosphonium ionic liquid as an efficient extractant for green desulfurization of liquid fuel: An experimental and computational study

Effat Kianpour et al.

CHEMICAL ENGINEERING JOURNAL (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Acidic Ionic Liquids

Ananda S. Amarasekara

CHEMICAL REVIEWS (2016)

Add to Collection

Article Energy & Fuels

Energy-efficient extractive desulfurization of gasoline by polyether-based ionic liquids

Fengli Yu et al.

FUEL (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Tuning Task-Specific Ionic Liquids for the Extractive Desulfurization of Liquid Fuel

Hua Zhao et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Boron Nitride Mesoporous Nanowires with Doped Oxygen Atoms for the Remarkable Adsorption Desulfurization Performance from Fuels

Jun Xiong et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)

Add to Collection

Article Chemistry, Multidisciplinary

A simple and cost-effective extractive desulfurization process with novel deep eutectic solvents

Xin Wang et al.

RSC ADVANCES (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Protic Ionic Liquids: Evolving Structure-Property Relationships and Expanding Applications

Tamar L. Greaves et al.

CHEMICAL REVIEWS (2015)

Add to Collection

Article Energy & Fuels

Temperature-responsive ionic liquid extraction and separation of the aromatic sulfur compounds

Wei Jiang et al.

FUEL (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Few-layered graphene-like boron nitride induced a remarkable adsorption capacity for dibenzothiophene in fuels

Jun Xiong et al.

GREEN CHEMISTRY (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Porous ionic liquids: synthesis and application

Shiguo Zhang et al.

CHEMICAL SCIENCE (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Porous Liquids: A Promising Class of Media for Gas Separation

Jinshui Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)

Add to Collection

Article Engineering, Environmental

Oxidative desulfurization of model diesel via dual activation by a protic ionic liquid

Hongying Lu et al.

JOURNAL OF HAZARDOUS MATERIALS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Dissecting AnionCation Interaction Energies in Protic Ionic Liquids

Koichi Fumino et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2013)

Add to Collection

Article Polymer Science

Adsorption removal of crystal violet from aqueous solution using a metal-organic frameworks material, copper coordination polymer with dithiooxamide

Xiaojuan Li et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Temperature and Solvent-Dependent Morphological Sol Gel Transformation: An in Situ microscopic observation

Yaqun Huang et al.

LANGMUIR (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.