☆ 4.7 Article

3D porous MnCo2S4 network decorated nitrogen-doped monolayer Ti3C2 based supercapacitors with superior energy density

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Related references

Note: Only part of the references are listed.

Article Electrochemistry

MnCo2S4 nanosheet arrays modified with vermicular polypyrrole for advanced free-standing flexible electrodes

Min Fu et al.

Summary: In this work, MnCo2S4 nanosheet arrays modified with vermicular polypyrrole (MCS@PPy) were grown on activate carbon cloth (ACC) using solvothermal and electropolymerization technologies. The resulting MCS@PPy60/ACC composites exhibited high areal capacitance and satisfactory mechanical properties. The composites were then used as positive electrodes in flexible supercapacitors (FSCs) and demonstrated high energy density, ultrahigh cycling stability, and impressive flexibility. This work provides insights for the study of high-performance free-standing flexible electrodes in FSCs.

ELECTROCHIMICA ACTA (2023)

Add to Collection

Article Chemistry, Physical

Three-dimensional network structured MnCo2S4/NiCo2S4 electrode materials assembled with two-dimensional nanosheets as basic building units for asymmetric supercapacitor applications

Weiqi Kong et al.

Summary: Recently, the construction of morphology and structure has been recognized as a key factor in enhancing the cycle stability and rate performance of nanomaterials. In this study, three-dimensional network structured MnCo2S4/NiCo2S4 (MCS/NCS) composites were synthesized by simple electrodeposition of NiCo2S4 nanosheets onto the framework of MnCo2S4 nanosheets. The MCS/NCS composites exhibited better capacitive and conductive properties compared to the two-dimensional nanosheet structures. Furthermore, the effects of electrodeposition time on the morphology and electrochemical properties of the composites were investigated. Among them, MCS/NCS-6 showed a unique structure and excellent electrochemical properties, demonstrating remarkable specific capacity (920 C g-1 at a current density of 1 A g-1) and good cycling stability. Additionally, the fabricated asymmetric supercapacitor MCS/NCS//AC assembly displayed a high energy density of 45.6 Wh kg-1 (800 W kg-1 power density) and good cycle life (75.6%, 10,000 cycles), indicating the potential application of this uniquely structured electrode material in alkaline aqueous energy storage devices such as asymmetric supercapacitors.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Graphitic Carbon Nitride-Induced Multifold Enhancement in Electrochemical Charge Storage of CoS-NiCo2S4 for All-Solid-State Hybrid Supercapacitors

Yogesh Kumar Sonia et al.

Summary: In this study, a graphitic carbon nitride (GCN)-heterostructurized CoS-NiCo2S4 material is designed and synthesized. The GCN induces improved charge transfer, surface-controlled charge storage, and increased capacitance in CoS-NiCo2S4. All-solid-state hybrid supercapacitor devices using CoS-NiCo2S4/GCN||N-rGO exhibit enhanced capacitance, energy density, and charge-discharge durability compared to CoS-NiCo2S4||N-rGO devices. This research provides important insights for the development of low-cost and high-performance electrode materials for next-generation technologies.

LANGMUIR (2023)

Add to Collection

Article Energy & Fuels

Hierarchical Flower-like NiMn-LDH@MnCo2S4 Grown on Nickle Foam as a High-Specific Capacity Faradaic Electrode

Muhammad Arslan Raza et al.

Summary: In order to enhance the electrochemical performance and lifespan of supercapacitor electrode materials, scientists are developing hierarchical nanostructures. In this study, a hierarchically structured NiMn-LDH@MnCo2S4 with a flower-like morphology was synthesized on nickel foam using a hydrothermal method. The hierarchical structure exhibited improved electrochemical activity. The resulting hybrid electrode, NiMn-LDH@MnCo2S4 Faradaic, showed a specific capacity of 341.1 mAh g-1 (1228 C g-1) at a current density of 2 A g-1, surpassing that of the pristine MnCo precursor and MnCo2S4 with specific capacities of 37.5 mAh g-1 and 150.6 mAh g-1 (542.2 C g-1), respectively, at the same current density. Furthermore, the hybrid electrode exhibited exceptional cyclic stability of 95%.

ENERGY & FUELS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Three-dimensional N-doped mesoporous carbon-MXene hybrid architecture for supercapacitor applications

Abeer Enaiet Allah

Summary: Hierarchical heterostructures of mesoporous carbon wrapped around MXene nanolayers have been studied as electrode materials for energy storage systems. The challenge lies in fabricating such structures with controlled material morphology and high pore accessibility for the mesostructured carbon layers.

RSC ADVANCES (2023)

Add to Collection

Article Materials Science, Ceramics

Hierarchical Ti3C2 MXene/Zn3In2S6 Schottky junction for efficient visible-light-driven Cr(VI) photoreduction

Hongfei Yin et al.

Summary: Ti3C2 MXene/Zn3In2S6 Schottky junctions were prepared for Cr(VI) photoreduction and their physical and photoelectrochemical properties were characterized. The nanocomposites showed enhanced photocatalytic performance due to effective separation and transfer of photoexcited charge carriers. The deleterious role of superoxide radicals for Cr(VI) photoreduction was confirmed.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Engineering, Environmental

Tailoring the interfacial active center of MnSxO2-x/MnCo2S4 heterostructure to boost the performance for oxygen evolution reaction and Zn-Air batteries in neutral electrolyte

Kai Wang et al.

Summary: Tailoring interfaces in heterostructured electrocatalysts is an optimal strategy for improving electrocatalytic performance. This study demonstrates a novel approach to construct a heterostructured electrocatalyst of MnSxO2-x/MnCo2S4, with fine-tuned density and structure of the active centers. The MnS0.10O1.90/MnCo2S4 sample exhibited excellent oxygen evolution reaction performance and stability in neutral zinc-air batteries.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

In-situ continuous hydrothermal synthesis of TiO2 nanoparticles on conductive N-doped MXene nanosheets for binder-free Li-ion battery anodes

Uthman Alli et al.

Summary: In this study, N-doped MXene-TiO2 hybrid anode materials were synthesized using an aqueous route, showing improved electrochemical performance and increased specific energy capacity. The N-doped TiO2-MXene was modified through a continuous hydrothermal process, demonstrating good cyclic performance and Coulombic efficiency.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

One-pot synthesis of ZnO quantum dots/N-doped Ti3C2 MXene: Tunable nitrogen-doping properties and efficient electrochemiluminescence sensing

Ding Jiang et al.

Summary: Nitrogen-doped ZnO quantum dots decorated nitrogen-doped Ti3C2 MXene composites were designed and prepared, showing enhanced Electrochemiluminescence (ECL) performance with increasing nitrogen-doping levels. A novel ECL sensor was constructed for sensitive detection of chloramphenicol using the resultant nanocomposites, demonstrating wide linear range, low detection limit, and high stability.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Environmental Sciences

Meta-analysis of the effect of low-level occupational benzene exposure on human peripheral blood leukocyte counts in China *

Hao Zhang et al.

Summary: This study investigated the effect of low-level occupational benzene exposure on human peripheral blood leukocyte counts and found that it could lead to a higher abnormal rate of peripheral blood leukocyte counts, posing a health risk to workers. The results of this study can provide a scientific basis for future revision of occupational benzene exposure limits and the formulation of environmental standards concerning benzene in China.

JOURNAL OF ENVIRONMENTAL SCIENCES (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Vertically aligned ZnCo2O4 nanoplates on Ti3C2 for high-efficiency hybrid supercapacitors

Hao Wang et al.

Summary: This study reports the design and synthesis of a novel nanoplate-on-nanosheet architecture as a high-performance electrode for supercapacitors. The electrode exhibits high structural stability and electrochemical activity, leading to high specific capacity and energy density, as well as excellent long-term stability. This work provides a promising strategy for the preparation of advanced MXene-based electrodes for electrochemical capacitors.

NEW JOURNAL OF CHEMISTRY (2022)

Add to Collection

Article Chemistry, Inorganic & Nuclear

In situ synthesis of N-doped TiO2 on Ti3C2 MXene with enhanced photocatalytic activity in the selective reduction of nitrate to N2

Rui Zheng et al.

Summary: In this study, a new method for synthesizing N-doped TiO2/Ti3C2 nanocomposites at low calcination temperature was reported, and it was found that the prepared composite exhibited excellent activity in the photocatalytic reduction of nitrate. The doping of nitrogen was beneficial for enhancing the light absorption ability of the material, and the layered structure of the composite accelerated charge transfer and separation of photogenerated charge carriers. Moreover, the addition of formic acid was found to enhance the photocatalytic activity of the composite in the reduction of nitrate.

INORGANIC CHEMISTRY FRONTIERS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

N-doped MXene derived from chitosan for the highly effective electrochemical properties as supercapacitor

Liuyue Pu et al.

Summary: A new type of N-doped MXene nanomaterial was prepared from non-toxic biological chitosan and MXene as a potential electrode for supercapacitors, showing high specific capacitance and excellent stability after 10,000 charge and discharge cycles. This was attributed to the lone pair of electrons of the N atom and increased interlayer distance in the N-doped MXene.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Charge transport and photodetection properties of Mo-doped MnS thin film

Monika et al.

Summary: In this study, Mo-doped MnS thin films with a thickness of about 100 nm were fabricated by thermal evaporation technique. The structural, morphological, and electrical properties of the films were investigated. The results showed that the fabricated devices exhibited two types of conduction mechanisms, namely thermally activated conduction and variable range hopping, and they were also sensitive to light intensity.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2022)

Add to Collection

Article Materials Science, Ceramics

Convenient synthesis of Ni-Mn-S@rGO composite with enhanced performance for advanced energy storage applications

Yaning Guo et al.

Summary: A Ni-Mn-S@rGO composite material was designed to enhance the performance of supercapacitors, showing potential applications in the field.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Engineering, Environmental

Ultrafast flashlight sintered mesoporous NiO nanosheets for stable asymmetric supercapacitors

Rohan B. Ambade et al.

Summary: Ultrafast flashlight sintering (FLS) was used to fabricate mesoporous ultrathin NiO nanosheets on carbon cloth (CC) as green electrodes for flexible supercapacitors (SCs). The FLS-NiO@i12J electrodes exhibited remarkable specific capacity and outperformed conventional thermally annealed (CTA) NiO electrodes. The flexible FLS-NiO@i12J//rGO asymmetric SCs showed remarkable energy density and cycling stability.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

Multifunctional Co3O4/Ti3C2Tx MXene nanocomposites for integrated all solid-state asymmetric supercapacitors and energy-saving electrochemical systems of H2 production by urea and alcohols electrolysis

Shidong Li et al.

Summary: Co3O4/Ti3C2Tx MXene nanocomposites were fabricated and their electrochemical performance for energy storage and conversion were systematically investigated. The nanocomposites showed high specific capacitance and long-term stability, highlighting their significant potential for solid-state supercapacitors and catalytic energy-saving applications.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Synergistic regulation of dielectric-magnetic dual-loss and triple heterointerface polarization via magnetic MXene for high-performance electromagnetic wave absorption

Chunhua Sun et al.

Summary: In this study, a series of loosely packed accordion-like 3D NiCo/CeO2/Ti3C2Tx materials were fabricated by introducing self-assembled NiCo alloys and CeO2, achieving tunable and high-efficient electromagnetic wave absorption. The materials have the characteristics of dielectric-magnetic dual-loss and triple interfacial polarization.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Electrochemistry

Asymmetric supercapacitors based on nickel decorated graphene and porous graphene electrodes

Alberto Morenghi et al.

Summary: Thermal exfoliation of graphite oxide is a scalable method to produce defective graphene-based compounds as electrode materials for high-performance electrochemical supercapacitors. Decorating defective graphene with Ni nanoparticles enhances the specific capacitance of the electrodes by one order of magnitude, reaching up to 1900 F/g. An asymmetric supercapacitor fabricated with a pure graphene negative electrode and a Ni-decorated graphene positive electrode demonstrates good reversibility and stability in an aqueous electrolyte.

ELECTROCHIMICA ACTA (2022)

Add to Collection

Article Electrochemistry

Flexible quasi-solid-state supercapacitors based on Ti3C2-Polypyrrole nanocomposites

J. Vigneshwaran et al.

Summary: The energy storage performance of polypyrrole-based MXene nanocomposite electrode is studied, showing excellent specific capacitance and cycle performance. By fabricating quasi-solid-state supercapacitors, higher energy density and power density are achieved, with a wide operating potential window. This has significant implications for energy storage solutions.

ELECTROCHIMICA ACTA (2022)

Add to Collection

Article Energy & Fuels

Robust hierarchical three dimensional nickel cobalt tungstate-MXene nanocomposite for high performance symmetric coin cell supercapacitors

J. Vigneshwaran et al.

Summary: The rational design of electrode materials with hierarchically structured pseudocapacitive materials has been identified as a successful strategy for improving the electrochemical characteristics of supercapacitors. In this study, a Ni-CoWO4 incorporated MXene nanocomposite was prepared and showed excellent electrochemical performance.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Engineering, Chemical

Construction of 0D/2D CeO2/CdS direct Z-scheme heterostructures for effective photocatalytic H2 evolution and Cr(VI) reduction

Hongfei Yin et al.

Summary: Energy crisis and environmental problems caused by Cr(VI)-containing wastewater have attracted increasing attention due to the rapid development of human society. In this study, CeO2/CdS nanocomposites were successfully fabricated for photocatalytic hydrogen evolution and Cr(VI) reduction. The hybrid catalysts exhibited remarkable photocatalytic activities, surpassing the single components. The improved performance can be attributed to the unique electron and hole transfer pathway.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Electrochemistry

Three-Dimensional Porous MnCo2S4 Microrugby Balls Supported on Carbon Cloth for Efficient Oxygen Evolution Reaction

Tiantian Ma et al.

Summary: The design and development of stable oxygen evolution electrocatalyst with outstanding performance is crucial for hydrogen production. In this study, MnCo2S4/CC catalyst was successfully prepared with a self-supported design and porous structure, which exhibits remarkable electrochemical performance due to its large electrochemical surface area and high conductivity.

CHEMELECTROCHEM (2022)

Add to Collection

Article Chemistry, Physical

Biomass derived hierarchical porous carbon for supercapacitor application and dilute stream CO2 capture

Thibeorchews Prasankumar et al.

Summary: In this study, high surface area porous carbons derived from sustainable biomass wastes were prepared and showed excellent performance in energy storage and gas sorption applications. The activated porous carbon derived from Tasmanian Blue Gum tree bark exhibited a hierarchically connected mesoporous structure with a large surface area and showed remarkable electrochemical storage capacity and CO2 capture performance. This work provides a simple and feasible strategy for converting waste biomass into value-added activated carbon.

CARBON (2022)

Add to Collection

Article Chemistry, Physical

Z-scheme TiO2_ x@ZnIn2S4 architectures with oxygen vacancies-mediated electron transfer for enhanced catalytic activity towards degradation of persistent antibiotics

Min Zhang et al.

Summary: In photocatalysis, the development of high-performance micro-nano photocatalysts is crucial for treating pharmaceutical products in wastewater. Researchers prepared a Z-scheme TiO2_x @ZnIn2S4 heterojunction to improve photoelectric activity and reduce recombination rate. The heterojunction showed significantly better photocatalytic performance compared to pristine TiO2_x and ZnIn2S4 in degrading tetracycline hydrochloride and nitrofurantoin.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Add to Collection

Article Chemistry, Analytical

An inorganic base stripping approach to synthesize N-doped Ti3C2 quantum dots as fluorescence nanoprobe for the simultaneous detection of Co2+ and Ag+ ions

Xin Wang et al.

Summary: In this study, N-doped Ti3C2 quantum dots (N-Ti3C2 QDs) were synthesized as fluorescent nanoprobe through inorganic base stripping and solvothermal approach. A simple N-Ti3C2 QDs based fluorescent assay was developed for the simultaneous determination of Co2+ and Ag+ ions, with a low detection limit.

MICROCHEMICAL JOURNAL (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Rhenium Sulfide Incorporated in Molybdenum Sulfide Nanosheets for High-Performance Symmetric Supercapacitors with Enhanced Capacitance

Shanmugasundaram Manoj et al.

Summary: In this study, ReS2 embedded in MoS2 nanosheets (RMS-31) electrode material was synthesized by a hydrothermal technique, which demonstrated superior pseudocapacitive behavior and long-term stability. The high performance of this electrode can be attributed to the synergistic effect of ReS2 and MoS2, as well as the presence of metallic 1T-MoS2 phase.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Chemistry, Physical

Fabrication of hierarchical integrated 3D hollow MnS@MoS2 microcubes via a template-controlled synthesis for asymmetric supercapacitors

Qiannan Zhou et al.

Summary: This work presents the synthesis of a 3D hollow hierarchical bimetallic sulfide architecture (MnS@MoS2) for supercapacitors by in situ growing MoS2 nanosheets onto hollow MnS microcubes. The MnS@MoS2 material exhibits adequate active sites, short ion diffusion path and improved conductivity, resulting in superior capacitance as an electrode material. Furthermore, the assembled asymmetric supercapacitor device shows high energy density and superior cycling life.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection

Article Chemistry, Physical

MnCo2S4 - MXene: A novel hybrid electrode material for high performance long-life asymmetric supercapattery

K. Nasrin et al.

Summary: Supercapattery, as an ideal electrochemical energy storage device, combines high energy capacity of batteries with high power output of supercapacitors. By synthesizing MCS-MXene hybrid material, it leads to improved specific capacitance in supercapattery electrodes, resulting in high energy and power density as well as excellent cycling stability in fabricated asymmetric supercapattery.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

3D Porous Oxidation-Resistant MXene/Graphene Architectures Induced by In Situ Zinc Template toward High-Performance Supercapacitors

Xue Yang et al.

Summary: A fast and efficient self-assembly route was demonstrated to prepare a 3D porous oxidation-resistant MXene/graphene composite, which effectively prevents the oxidation and self-restacking of MXene, ensuring outstanding electrical conductivity, specific capacitance, and cycling stability. This work paves a new avenue to solve the long-standing challenges of MXene.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Self-assembled S,N co-doped reduced graphene oxide/MXene aerogel for both symmetric liquid- and all-solid-state supercapacitors

Xuanli Liu et al.

Summary: In this study, a three-dimensional hybrid porous aerogel made of sulfur and nitrogen doped reduced graphene oxide and MXene (S,N-rGO@MXene) was successfully self-assembled via a simple hydrothermal method. This material exhibited excellent electrochemical performance and showed promising results in supercapacitors, especially in terms of energy density and cycle stability.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Physical

Ultrathin N-doped Ti3C2-MXene decorated with NiCo2S4 nanosheets as advanced electrodes for supercapacitors

Wenling Wu et al.

Summary: The research involves anchoring open NiCo2S4 nanosheets onto ultrathin nitrogen-doped Ti3C2-MXene nanosheets to form a novel heterostructure composite, which shows outstanding electrochemical performances for supercapacitors with high specific capacitance and stable cycle life.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Functional carbons for energy applications

Thibeorchews Prasankumar et al.

Summary: This article focuses on the innovations and studies of carbon-based nanocomposites and their applications, highlighting the excellent properties of carbon and the characteristics of TMO and CPs. It is pointed out that the functionality of carbon electrodes can be significantly improved by the homogeneous blending of TMO and CPs.

MATERIALS RESEARCH BULLETIN (2021)

Add to Collection

Article Chemistry, Physical

One-step synthesized N-doped graphene-based electrode materials for supercapacitor applications

Melih Besir Arvas et al.

Summary: A novel method for preparing nitrogen-doped graphene electrodes for high performance supercapacitors, called Yucel's method, was demonstrated in this study. The electrodes were synthesized in a short time, at room temperature, one step process without harmful chemicals. The study also investigated the effects of functional groups on specific capacitance properties and proposed a mechanism for the incorporation of these functional groups.

IONICS (2021)

Add to Collection

Article Chemistry, Physical

CoS2 engulfed ultra-thin S-doped g-C3N4 and its enhanced electrochemical performance in hybrid asymmetric supercapacitor

S. Vinoth et al.

Summary: This work demonstrates a high-performance hybrid asymmetric supercapacitor (HASC) utilizing sulfur-doped graphitic carbon nitride/cobalt disulfide (S-gC(3)N(4)/CoS2) materials and bio-derived carbon configuration, achieving high electrochemical stability and cycling stability at very high current density, providing a new approach for the development of high-performance supercapacitors.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Construction of hierarchical honeycomb-like MnCo2S4 nanosheets as integrated cathodes for hybrid supercapacitors

Chao Li et al.

Summary: Researchers have significantly improved the electrochemical performance of hierarchical honeycomb-like manganese cobalt sulfide nanosheets, making them a promising cathode material for hybrid supercapacitors. The assembled HSC shows high energy density and long cycling lifespan, demonstrating practical prospects in energy storage systems.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

Mixed-dimensional heterostructure of few-layer MXene based vertical aligned MoS2 nanosheets for enhanced supercapacitor performance

Wentao Hou et al.

Summary: A mixed-dimensional heterostructure of MoS2 deposited few-layer Ti3C2Tx nanosheets was synthesized to enhance the supercapacitor performance, delivering a remarkable specific capacitance and excellent cycling stability. The heterostructure shows high energy density and can serve as an archetype for enhancing electrochemical performance by integrating different materials' advantages synergistically.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Engineering, Environmental

Integration of CuO nanosheets to Zn-Ni-Co oxide nanowire arrays for energy storage applications

Iftikhar Hussain et al.

Summary: The study demonstrated the integration of 2D Cu-oxide nanosheets and 1D Zn-Ni-Co-oxide nanowire arrays on a 3D substrate to create a high-performance electrode material for supercapacitors. The resulting hybrid supercapacitor device showed promising energy density and power density, with the ability to power multiple color LEDs for an extended period of time.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

Influence of cycling stability on structure and properties of MnCo2S4 nanocomposite for high-performance supercapacitors

Damin Lee et al.

Summary: The study investigates the performance of glycerol-MnCo2S4 electrode prepared by hydrothermal method in supercapacitors, demonstrating high specific capacitance, cycling stability, and energy density, making it a promising positive electrode material for high-performance asymmetric supercapacitors.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

NiCo2S4-Based Composite Materials for Supercapacitors

Tao Chen et al.

CHEMPLUSCHEM (2020)

Add to Collection

Article Engineering, Environmental

In-situ MOFs-derived hollow Co9S8 polyhedron welding on the top of MnCo2S4 nanoneedles for high performance hybrid supercapacitors

Hong Jia et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Super-Kinetically Pseudocapacitive MnCo2S4 Nanourchins toward High-Rate and Highly Stable Sodium-Ion Storage

Yew Von Lim et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Electrochemistry

Designing of nanoflakes anchored nanotubes-like MnCo2S4/halloysite composites for advanced battery like supercapacitor application

S. K. Shinde et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Nitrogen-Doped Ti3C2 MXene: Mechanism Investigation and Electrochemical Analysis

Chengjie Lu et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Facile template-free synthesis of 3D hierarchical ravine-like interconnected MnCo2S4 nanosheet arrays for hybrid energy storage device

Laleh Abbasi et al.

CARBON (2020)

Add to Collection

Article Materials Science, Ceramics

Solvothermal synthesis of in situ nitrogen-doped Ti3C2 MXene fluorescent quantum dots for selective Cu2+ detection

Yefeng Feng et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Electrochemistry

Hierarchical MnCo2S4 nanowires/NiFeLDH nanosheets/graphene: A promising binder-free positive electrode for high-performance supercapacitors

Ronak Hayati Monjoghtapeh et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection

Article Chemistry, Physical

Scalable, and low-cost treating-cutting-coating manufacture platform for MXene-based on-chip micro-supercapacitors

Haichao Huang et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Vortex fluidic mediated synthesis of TiO2 nanoparticle/MXene composites

Ahmed Hussein Mohammed Al-antaki et al.

CHEMNANOMAT (2020)

Add to Collection

Article Nanoscience & Nanotechnology

MXene/N-Doped Carbon Foam with Three-Dimensional Hollow Neuron-like Architecture for Freestanding, Highly Compressible All Solid-State Supercapacitors

Li Sun et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Pseudocapacitive Crystalline MnCo2O4.5 and Amorphous MnCo2S4 Core/Shell Heterostructure with Graphene for High-Performance K-Ion Hybrid Capacitors

Chang Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Mechanochemical Preparation of N,S-Doped Graphene Oxide Using (NH4)2SO4 for Supercapacitor Applications

Xue-Qin Ma et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Using a Self-Assembled Two-Dimensional MXene-Based Catalyst (2D-Ni@Ti3C2) to Enhance Hydrogen Storage Properties of MgH2

Wen Zhu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Physical

Interface design based on Ti3C2 MXene atomic layers of advanced battery-type material for supercapacitors

Chengxing Lu et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Methanol and Diethanolamine Assisted Synthesis of Flexible Nitrogen-Doped Ti3C2 (MXene) Film for Ultrahigh Volumetric Performance Supercapacitor Electrodes

Chenhui Yang et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Article Materials Science, Ceramics

Hierarchical architecture of Ti3C2@PDA/NiCo2S4 composite electrode as high-performance supercapacitors

Wenling Wu et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Chemistry, Physical

Synthesis of MnCo2O4@MnCo2S4 core/shell micro-nanostructures on Ni foam for high performance asymmetric supercapacitors

Xin Wang et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2019)

Add to Collection

Article Chemistry, Physical

Versatile N-Doped MXene Ink for Printed Electrochemical Energy Storage Application

Lianghao Yu et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Materials Science, Ceramics

Enhanced electrochemical performances of organ-like Ti3C2 MXenes/polypyrrole composites as supercapacitors electrode materials

Wenling Wu et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Electrochemistry

Freestanding nitrogen-doped d-Ti3C2/reduced graphene oxide hybrid films for high performance supercapacitors

L. Yang et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Chemistry, Physical

Unexplored Pathways To Charge Storage in Supercapacitors

Anvesh Dixit et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

Add to Collection

Article Chemistry, Multidisciplinary

All Hierarchical Core-Shell Heterostructures as Novel Binder-Free Electrode Materials for Ultrahigh-Energy-Density Wearable Asymmetric Supercapacitors

Qiulong Li et al.

ADVANCED SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Graphene wrapped MXene via plasma exfoliation for all-solid-state flexible supercapacitors

Keliang Wang et al.

ENERGY STORAGE MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

MnCo2S4/FeCo2S4 lollipop arrays on a hollow N-doped carbon skeleton as flexible electrodes for hybrid supercapacitors

Yunpeng Huang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Uniform P doped Co-Ni-S nanostructures for asymmetric supercapacitors with ultra-high energy densities

Yao Meng et al.

NANOSCALE (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Applications of 2D MXenes in energy conversion and storage systems

Jinbo Pang et al.

CHEMICAL SOCIETY REVIEWS (2019)

Add to Collection

Article Chemistry, Physical

A facile method for synthesizing CuS decorated Ti3C2 MXene with enhanced performance for asymmetric supercapacitors

Zhihu Pan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Engineering, Environmental

Engineering rGO-CNT wrapped Co3S4 nanocomposites for high-performance asymmetric supercapacitors

Abdolkhaled Mohammadi et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Article Materials Science, Multidisciplinary

High photoluminescence quantum yield of 18.7% by using nitrogen- doped Ti3C2 MXene quantum dots

Quan Xu et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Mesoporous MnCo2S4 nanosheet arrays as an efficient catalyst for Li-O2 batteries

Zoya Sadighi et al.

NANOSCALE (2018)

Add to Collection

Article Chemistry, Physical

New Ti3C2 aerogel as promising negative electrode materials for asymmetric supercapacitors

Lu Li et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection

Article Physics, Condensed Matter

The influence of N content on structure, phase stability, elastic and electronic properties in Ti3AlC2-xNx (x=0-2)

Xia Qin et al.

PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2017)

Add to Collection

Article Energy & Fuels

Enhanced optical properties of TiN-based spectrally selective solar absorbers deposited at a high substrate temperature

Xiang-Hu Gao et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)

Add to Collection

Article Chemistry, Physical

Controllable MnCo2S4 nanostructures for high performance hybrid supercapacitors

Abdelnaby M. Elshahawy et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Preparation of Hierarchical MnCo2S4 Nanotubes for High-Performance Supercapacitors and Non-Enzymatic Glucose Sensors

Chengzhen Wie et al.

CHEMISTRYSELECT (2017)

Add to Collection

Article Electrochemistry

Improved capacitance of nitrogen-doped delaminated two-dimensional titanium carbide by urea-assisted synthesis

Chenhui Yang et al.

ELECTROCHIMICA ACTA (2017)

Add to Collection

Article Engineering, Environmental

Synthesis of hierarchical NiS microflowers for high performance asymmetric supercapacitor

Bing Guan et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Add to Collection

Article Electrochemistry

Three-dimensional nitrogen-doped graphene hydrogels prepared via hydrothermal synthesis as high-performance supercapacitor materials

Yuqing Liao et al.

ELECTROCHIMICA ACTA (2016)

Add to Collection

Article Chemistry, Physical

Fabrication of γ-MnS/rGO composite by facile one-pot solvothermal approach for supercapacitor applications

Xianfu Li et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Hybrid nickel manganese oxide nanosheet-3D metallic dendrite percolation network electrodes for high-rate electrochemical energy storage

Tuyen Nguyen et al.

NANOSCALE (2015)

Add to Collection

Article Chemistry, Physical

Flexible and cross-linked N-doped carbon nanofiber network for high performance freestanding supercapacitor electrode

Yongliang Cheng et al.

NANO ENERGY (2015)

Add to Collection

Article Chemistry, Multidisciplinary

High-performance dye-sensitized solar cell based on an electrospun poly(vinylidene fluoride-co-hexafluoropropylene)/cobalt sulfide nanocomposite membrane electrolyte

E. Vijayakumar et al.

RSC ADVANCES (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Three dimensional N-doped graphene-CNT networks for supercapacitor

Bo You et al.

CHEMICAL COMMUNICATIONS (2013)

Add to Collection

Article Electrochemistry

Tunable N-doped or dual N, S-doped activated hydrothermal carbons derived from human hair and glucose for supercapacitor applications

Weijiang Si et al.

ELECTROCHIMICA ACTA (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Mesoporous nitrogen-rich carbons derived from protein for ultra-high capacity battery anodes and supercapacitors

Zhi Li et al.

ENERGY & ENVIRONMENTAL SCIENCE (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Two-Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2

Michael Naguib et al.

ADVANCED MATERIALS (2011)

Add to Collection

Article Chemistry, Multidisciplinary

Nitrogen-Doped Graphene for High-Performance Ultracapacitors and the Importance of Nitrogen-Doped Sites at Basal Planes

Hyung Mo Jeong et al.

NANO LETTERS (2011)

Add to Collection

© Peeref 2019-2024. All rights reserved.