4.7 Article

Mn-Co Prussian blue analogue cubic frames for efficient aqueous Zn ion batteries

Related references

Note: Only part of the references are listed.
Article Nanoscience & Nanotechnology

High-Voltage and Stable Manganese Hexacyanoferrate/Zinc Batteries Using Gel Electrolytes

Lei Luo et al.

Summary: Due to its high safety and environmental friendliness, aqueous zinc-ion batteries have attracted much attention recently. Prussian blue and its analogues are regarded as promising cathode materials. Among them, manganese hexacyanoferrate is suitable due to its high operating voltage, large capacity, and low price. However, the poor cycling stability of manganese hexacyanoferrate, mainly caused by transition metal dissolution, side reaction, and phase transition, severely limits its practical application. In this study, gelatin is used to reduce the dissolution effect of transition metal manganese by limiting the content of free water in the electrolyte. Gelatin also improves the durability of the Zn anode. The optimized MnHCF/gel-0.3/Zn battery exhibits high reversible capacity (120 mAh center dot g(-1) at 0.1 A center dot g(-1)), excellent rate performance (42.7 mAh center dot g(-1) at 2 A center dot g(-1)), and good capacity retention (65% at 0.5 A center dot g(-1) after 1000 cycles).

ACS APPLIED MATERIALS & INTERFACES (2023)

Article Materials Science, Ceramics

Prussian blue analogue vigorously coupled to Ti3C2TX MXene nanosheet toward high-performance Li-ion batteries with stable cycling stability

Nan Zhang et al.

Summary: FeFe(CN)6 (Fe-PBA)/Ti3C2TX hybrids (Fe-PBA-CT) with improved reversible capacity and high stable cycling stability were synthesized. Fe-PBA cubic nano-particles effectively promote electrode/electrolyte contact, accelerate electron transfer and ion diffusion. Ti3C2TX MXenes conductive networks facilitate the transmission and diffusion of electrons/ions, and provide additional Li+ ions storage sites to improve specific capacity, rate performance and reversible capacity. The Fe-PBA-CT cathode with moderate content of Ti3C2TX MXenes exhibits superior discharge capacity, remarkable rate performance and excellent cycling stability.

CERAMICS INTERNATIONAL (2023)

Article Chemistry, Physical

Active cation-integration high-entropy Prussian blue analogues cathodes for efficient Zn storage

Jiangyuan Xing et al.

Summary: This study prepares a high-entropy Prussian blue analogue (HE-PBA) with increased configuration entropy, which exhibits improved electrochemical performance and structural stability in Zn-ion batteries. The HE-PBA undergoes a phase transition in the cathode, resulting in a stable structure and enhanced uptake of Zn2+ through the cocktail effect of multiple transition metal active redox couples.

NANO RESEARCH (2023)

Article Engineering, Chemical

Mechanochemical synthesis of Fe/Mn-based binary hexacyanoferrate for sodium-ion battery

Yuming Xi et al.

Summary: In this study, a facile one-pot two-step mechanochemical technology is developed to prepare Fe/Mn-based binary hexacyanoferrate/carbon composites. The construction of a hierarchical conductive network is found to greatly improve the rate performance and cycling stability, with a high capacity retention over 1000 cycles. The capacity attenuation and stabilization mechanisms are investigated, revealing the role of charge transfer resistance and solid solution reaction in the cycling process. Overall, the proposed mechanochemical synthesis of Fe/Mn-based binary hexacyanoferrate shows great potential in terms of environmental friendliness, cost-saving production, and comprehensive product performance.

POWDER TECHNOLOGY (2023)

Article Engineering, Multidisciplinary

Rational construction of Prussian blue analogue with inverted pyramid morphology as ultrastable cathode material for lithium-ion battery

Hui Chang et al.

Summary: In this study, Na1.13Fe[Fe(CN)]6.3.22H2O electrode materials with stepwise hollow inverted pyramid morphology were prepared by a simple hydrothermal method. The inverted pyramid Na1.13Fe[Fe(CN)]6.3.22H2O maintained the stability of the crystal structure and slowed down the volume expansion during the Li+ insertion-extraction process. The optimal Na1.13Fe[Fe(CN)]6.3.22H2O electrode exhibited high discharge specific capacities and ultrastable cycle stability.

COMPOSITES PART B-ENGINEERING (2023)

Article Chemistry, Physical

Active cation-integration high-entropy Prussian blue analogues cathodes for efficient Zn storage

Jiangyuan Xing et al.

Summary: A high-entropy Prussian blue analogue (HE-PBA) with increased configuration entropy was prepared by integrating five transition metal elements, exhibiting superior electrochemical performance and structural stability in Zn-ion batteries.

NANO RESEARCH (2023)

Review Chemistry, Multidisciplinary

Prussian Blue Analogues for Sodium-Ion Batteries: Past, Present, and Future

Jian Peng et al.

Summary: This review provides an overview of Prussian blue analogues (PBAs), including material-level optimization and their prospects in practical sodium-ion batteries. It aims to bridge the gap between laboratory research and commercial application.

ADVANCED MATERIALS (2022)

Article Chemistry, Physical

Rational design of Prussian blue analogues as conversion anodes for lithium-ion batteries with high capacity and long cycle life

Yun Tang et al.

Summary: In this study, low-cost KxMn[Fe(CN)(6)](y)square(1-y).nH(2)O with diverse H2O content and structure were harvested via controlling the crystallization rate. It was found that weaker Mn-N bond prepared at a faster crystallization rate is more conducive to the fast electrochemical kinetics of the reversible conversion paths, leading to superior Li-storage performances.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Chemistry, Multidisciplinary

Ball Milling Solid-State Synthesis of Highly Crystalline Prussian Blue Analogue Na2-xMnFe(CN)6 Cathodes for All-Climate Sodium-Ion Batteries

Jian Peng et al.

Summary: In this study, a water-in-salt nanoreactor was used to synthesize highly crystallized PBAs with reduced defects and water content, leading to improved performance in sodium-ion batteries. The synthesized material exhibited superior electrochemical performance and higher yield compared to its counterpart synthesized using the traditional water-based co-precipitation method.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Review Chemistry, Inorganic & Nuclear

Recent progress of Prussian blue analogues as cathode materials for nonaqueous sodium-ion batteries

Bingxing Xie et al.

Summary: The urgent market demand for energy storage and conversion has led to extensive investigations into coordination polymers. Prussian blue and Prussian blue analogues have emerged as promising cathode materials for sodium-ion batteries due to their 3D open framework, adjustable structure, and chemical composition. This review summarizes recent advancements and systematic understanding of Prussian blue and Prussian blue analogues in nonaqueous sodium-ion batteries, including their chemical composition, structure, material synthesis, modification strategy, and sodium storage mechanism. The review also discusses the structure-properties relationship, bulk phase, and interfacial stability of these materials, while identifying potential issues and future perspectives for scientific research and commercial applications of Prussian blue and Prussian blue analogues as cathode materials in nonaqueous sodium-ion batteries.

COORDINATION CHEMISTRY REVIEWS (2022)

Article Chemistry, Physical

Manganese hexacyanoferrate anchoring MnO2 with enhanced stability for aqueous zinc-ion batteries

Junchen Chen et al.

Summary: Aqueous zinc-ion batteries (ZIBs) have brought new opportunities and challenges to the energy storage market due to their low price, high safety, and environmental friendliness. Among the cathode materials, MnO2 is considered one of the most promising materials for ZIBs due to its high theoretical capacitance, abundant reserves, non-toxicity, and low cost. However, the cycling stability and rate performance of MnO2 have been limited by slow electrochemical kinetics and structural damage. To address this issue, a surface modification of manganese hexacyanoferrate (MnHCF) is proposed to optimize the cycling stability and rate performance of MnO2. The modified MnO2 composite shows improved cycling stability and retains a high initial capacity after multiple cycles.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Chemistry, Physical

Manganese and cobalt bimetallic-doped Prussian blue analogs as a bifunctional electrocatalyst for zinc-air batteries

Zhou Yang et al.

Summary: This study investigates the doping of manganese and cobalt into iron Prussian blue analogs (PBAs) as bifunctional electrocatalysts. The Mn1.33Co0.67-PBA exhibits outstanding electrocatalytic properties and good stability in alkaline solutions. By assembling this catalyst into a zinc-air battery, it achieves high power density, large specific capacity, and excellent cycle stability, showing potential for energy storage and conversion applications.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Article Multidisciplinary Sciences

Lithiated Prussian blue analogues as positive electrode active materials for stable non-aqueous lithium-ion batteries

Ziheng Zhang et al.

Summary: In this study, we assess the feasibility of Prussian blue analogues (PBAs) with different lithium content for non-aqueous Li-ion storage, and investigate the influence of water on the structural stability and Li-ion migration of PBAs through experimental and simulation studies. The experimental results demonstrate that a coin cell with Li2-xFeFe(CN)(6)·nH2O as the positive electrode material exhibits high discharge capacity retention during cycling.

NATURE COMMUNICATIONS (2022)

Article Chemistry, Physical

Regulation of ferric iron vacancy for Prussian blue analogue cathode to realize high-performance potassium ion storage

Zeyu Wang et al.

Summary: This study successfully synthesized PBAs cathode materials with high reversibility and cycling stability by introducing ethylenediaminetetraacetic acid dipotassium salt as a chelating agent. The presence of FeIII vacancies inhibits the movement of Fe-C bonds and reduces lattice distortion, leading to improved performance of PBAs.

NANO ENERGY (2022)

Article Chemistry, Physical

Prussian blue and its analogues as cathode materials for Na-, K-, Mg-, Ca-, Zn- and Al-ion batteries

Yujie Yang et al.

Summary: This paper comprehensively reviews the research progress of PB/PBAs-based cathode materials of metal-ion batteries, including synthesis methods, structural characteristics, electrochemical performance, and applications. The technical challenges are also analyzed, and future research directions are proposed.

NANO ENERGY (2022)

Article Chemistry, Physical

Prussian blue and its analogues for aqueous energy storage: From fundamentals to advanced devices

Mingwei Jiang et al.

Summary: Aqueous energy storage technologies offer significant advantages for grid-scale power stations due to their low cost, safe operation, and environmental friendliness. Prussian blue (PB) and its analogues (PBAs) as metal-organic coordination materials have been extensively studied for their open framework suitable for reversible insertion/extraction of various guest cations.

ENERGY STORAGE MATERIALS (2022)

Article Chemistry, Physical

Formation of Mn-Ni Prussian Blue Analogue Spheres as a Superior Cathode Material for Potassium-Ion Batteries

An Li et al.

Summary: Potassium manganese hexacyanoferrate (KMHCF) is a promising cathode material for potassium-ion batteries (PIBs) due to its impressive electrochemical performance, abundant elements, and easy synthesis. However, the capacity fading and poor K+ diffusion kinetics hinder its large-scale application. In this study, Mn-Ni Prussian blue analogue (MnNi-PBA) spheres were synthesized using a facile anion exchange method. The addition of Ni stabilizes the structure and provides rich active sites, leading to improved cycling performance and shorter ion diffusion pathways. The MnNi-PBA sphere cathode exhibits high initial discharge capacity, enhanced rate capability, and long cycle life. The reversible structural changes (monoclinic <-> cubic) of MnNi-PBA spheres are observed during cycling. These findings provide a design strategy for Mn-based Prussian blue analogues in PIBs.

ACS APPLIED ENERGY MATERIALS (2022)

Article Chemistry, Multidisciplinary

A polyaniline surface-modified Prussian blue analogue cathode for flexible aqueous Zn-ion batteries

Qifan Liu et al.

Summary: A modification strategy of polyaniline (PANI) coating on zinc ferricyanide (ZnHCF) is proposed to inhibit the dissolution of ZnHCF and achieve two stable discharge voltage platforms and high capacity in Zn-ion batteries. The battery also exhibits high stretchability and maintains stable electrochemical properties during stretching.

CHEMICAL COMMUNICATIONS (2022)

Article Electrochemistry

Electrochemical performance of manganese hexacyanoferrate cathode material in aqueous Zn-ion battery

Min Li et al.

Summary: In aqueous Zn-ion batteries, manganese hexacyanoferrate (MnHCF) exhibited gradual activation of active sites and partial replacement of Mn sites by zinc, leading to a decreasing capacity during cycling. This study provides insights into the electrochemical performance and structural changes of MnHCF in ZIBs.

ELECTROCHIMICA ACTA (2021)

Review Chemistry, Physical

Recent advancements in Prussian blue analogues: Preparation and application in batteries

Guangyu Du et al.

Summary: Prussian blue (PB) analogues, as advanced inorganics, have gained significant attention in electrochemical energy storage. Studies focus on improving structural, morphological, and electrochemical properties, as well as synthesizing composites with other materials. Applications in various batteries and future challenges are also discussed.

ENERGY STORAGE MATERIALS (2021)

Review Chemistry, Physical

Accommodating diverse ions in Prussian blue analogs frameworks for rechargeable batteries: The electrochemical redox reactions

Longtao Ma et al.

Summary: Prussian blue analogs (PBAs) show great potential as electrode materials for various rechargeable batteries, offering highly reversible insertion/removal of ions in both aqueous and non-aqueous electrolytes. However, challenges like limited electrochemical utilization of PBAs framework need to be addressed for further development.

NANO ENERGY (2021)

Article Chemistry, Multidisciplinary

Construction of Co-Mn Prussian Blue Analog Hollow Spheres for Efficient Aqueous Zn-ion Batteries

Yinxiang Zeng et al.

Summary: A template-engaged ion exchange approach was developed for synthesizing Co-substituted Mn-rich PBA hollow spheres, which showed efficient zinc ion storage properties with high capacity, decent rate capability, and prolonged cycle life.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Review Chemistry, Multidisciplinary

Fundamentals and perspectives in developing zinc-ion battery electrolytes: a comprehensive review

Tengsheng Zhang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Review Chemistry, Physical

A review on recent developments and challenges of cathode materials for rechargeable aqueous Zn-ion batteries

Dinesh Selvakumaran et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Article Chemistry, Multidisciplinary

Potassium manganese hexacyanoferrate/graphene as a high-performance cathode for potassium-ion batteries

Yunpo Sun et al.

NEW JOURNAL OF CHEMISTRY (2019)

Review Chemistry, Multidisciplinary

Recent Advances in Zn-Ion Batteries

Ming Song et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Article Chemistry, Multidisciplinary

Removal of Interstitial H2O in Hexacyanometallates for a Superior Cathode of a Sodium-Ion Battery

Jie Song et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Article Chemistry, Physical

Prussian blue analogues: a new class of anode materials for lithium ion batteries

Ping Nie et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)