☆ 4.7 Article

MXene fibers-based molecularly imprinted disposable electrochemical sensor for sensitive and selective detection of hydrocortisone

TALANTA (2024)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

Interactions of Catalytic Enzymes with n-Type Polymers for High-Performance Metabolite Sensors

David Ohayon et al.

Summary: We developed an electrochemical transistor with an n-type conjugated polymer film for sensitive and selective glucose detection in bodily fluids. By studying the impact of the polymer chemical structure on film surface properties and enzyme adsorption behavior, we found that a negatively charged, smooth, and hydrophilic film surface provides the best environment for enzyme adsorption and maximizes sensor performance.

ACS APPLIED MATERIALS & INTERFACES (2023)

Add to Collection

Article Engineering, Environmental

Fabrication and Characterization of a MnO2/Ti3C2Tx Based Gas Sensor for Highly Sensitive and Selective Detection of Lung Cancer Marker Hexanal

Yu Yao et al.

Summary: In this study, MnO2 with high catalytic activity was introduced onto MXene material, improving the sensitivity and selectivity of the gas sensor. The composite material exhibited a 10-20 times higher response to different volatile organic compounds compared to the pristine MXene-based sensor, and showed a unique and stable response to the lung cancer marker hexanal.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Biophysics

Non-invasive electrochemical immunosensor for sweat cortisol based on L-cys/AuNPs/MXene modified thread electrode

Thidarut Laochai et al.

Summary: In this study, a thread-based electrochemical immunosensor was fabricated for non-invasive detection of cortisol in sweat. The sensor demonstrated high sensitivity, wide linear range, and low detection limit. It also exhibited good reproducibility and long-term storage stability. Furthermore, by integrating the electrochemical sensor on a wristband, it can serve as a portable tool for monitoring sweat cortisol.

BIOSENSORS & BIOELECTRONICS (2022)

Add to Collection

Article Biochemical Research Methods

Measurements of hydrocortisone and cortisone for longitudinal profiling of equine plasma by liquid chromatography-tandem mass spectrometry

Kathy Tou et al.

Summary: The aim of this research was to investigate the plasma concentrations of hydrocortisone (HC) and cortisone (C) in race day samples compared to the administration of Triamcinolone Acetonide (TACA). The results showed that the use of TACA resulted in a decrease in HC/C values for up to 96 hours post-administration, longer than the detection period of TACA itself.

DRUG TESTING AND ANALYSIS (2022)

Add to Collection

Article Chemistry, Analytical

Molecularly imprinted ratiometric electrochemical sensor based on carbon nanotubes/cuprous oxide nanoparticles/titanium carbide MXene composite for diethylstilbestrol detection

Yide Xia et al.

Summary: In this study, a reliable detection of DES was achieved through a ratiometric strategy employing Cu2O nanoparticles as inner reference probe. The sensitivity of the sensor was further improved by introducing modified electrodes and CNT. The application of the sensor in real samples demonstrated its high sensitivity and accuracy for DES detection.

MICROCHIMICA ACTA (2022)

Add to Collection

Article Materials Science, Textiles

MXene/PVA Fiber-based Supercapacitor with Stretchability for Wearable Energy Storage

Wenjie Yu et al.

Summary: In this report, MXene/PVA fibers with good stretchability and impressive electrochemical properties were fabricated using a simple wet spinning method. These fibers can be used for fiber-based supercapacitors. Compared to pure PVA fibers, MXene/PVA fibers have significantly enhanced tensile strength and elongation, as well as improved thermal stability.

FIBERS AND POLYMERS (2022)

Add to Collection

Article Chemistry, Applied

Ultrasensitive aptasensor using electrospun MXene/polyvinylidene fluoride nanofiber composite for Ochratoxin A detection

Adel Mohammed Al-Dhahebi et al.

Summary: This study presents an ultrasensitive electrochemical aptasensor technology for detecting OTA in the food industry, with high sensitivity, low detection limit, and high selectivity.

FOOD CHEMISTRY (2022)

Add to Collection

Article Chemistry, Applied

Portable and on-site electrochemical sensor based on surface molecularly imprinted magnetic covalent organic framework for the rapid detection of tetracycline in food

Yukun Yang et al.

Summary: In this study, surface molecularly imprinted magnetic covalent organic frameworks were combined with a disposable screen-printed electrode to construct a portable and on-site electrochemical sensor for the rapid detection of tetracycline. The fabricated sensor showed good linearity, selectivity, reproducibility, stability, and applicability.

FOOD CHEMISTRY (2022)

Add to Collection

Article Chemistry, Analytical

Heterogeneous sensitization from nanoporous gold and titanium carbide (MXene) combining with molecularly imprinted polymers for highly sensitive and specific sensing detection of thiabendazole

Bo Zhang et al.

Summary: A novel electrochemical sensing interface has been developed for the detection of thiabendazole (TBZ). The interface is constructed through continuous electrode modification processes using nanoporous gold (NPG), titanium carbide (Ti3C2Tx MXene), and molecularly imprinted polymers (MIPs). The interface exhibits favorable sensitivity, selectivity, and stability, and has been successfully applied to the determination of TBZ in real samples.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Add to Collection

Article Chemistry, Analytical

Rapid Measurement of Residual Kanamycin Using Highly Specific Biomimetic Recognition Paper-Based Chip

Jian Song et al.

Summary: The study developed a paper chip using an in situ construction strategy, which combined boronate affinity metal-organic framework and molecularly imprinted polymers, achieving highly specific biomimetic recognition. With the aid of a liquid flow channel, the chip module enabled highly specific enrichment and visual detection of harmful residues in food within 30 minutes.

ANALYTICAL CHEMISTRY (2022)

Add to Collection

Article Chemistry, Physical

MoO3/TiO2/Ti3C2Tx nanocomposite based gas sensors for highly sensitive and selective isopropanol detection at room temperature

Yu Yao et al.

Summary: Researchers improved the stability and electrical properties of MXenes by introducing MoO3 with oxygen vacancies and a ternary heterostructure, and successfully developed a gas sensor based on MoO3/TiO2/Ti3C2Tx. This sensor exhibits stability under high oxidation conditions and has a 20-40 times higher response to various volatile organic compounds compared to the pristine sensor, with a unique response to isopropanol vapor.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection

Article Biochemical Research Methods

Analytical method development and determination of hydrocortisone acetate and fusidic acid simultaneously in cream formulation, by reversed-phase HPLC

Nawaz Rasool et al.

Summary: An accurate, simple, economical, precise and reproducible reversed-phase HPLC method was developed for the estimation of fusidic acid and hydrocortisone acetate in a cream formulation. The method proved to be validated, simple, rapid and applicable for routine analytical testing in quality control.

BIOMEDICAL CHROMATOGRAPHY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Molecularly imprinted electrochemical sensor for ascorbic acid determination based on MXene modified electrode

Qiuguo Wang et al.

Summary: A molecularly imprinted electrochemical sensor for ascorbic acid detection was prepared based on MXene modified glassy carbon electrode. The sensor showed good sensitivity and selectivity, and was successfully applied for the determination of ascorbic acid in vitamin C tablets.

MATERIALS LETTERS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Two-dimensional hybrid nanomaterials derived from MXenes (Ti3C2Tx) as advanced energy storage and conversion applications

Sen Zhao et al.

CHINESE CHEMICAL LETTERS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Recent progress of MXenes as the support of catalysts for the CO oxidation and oxygen reduction reaction

Yiying Zhang et al.

CHINESE CHEMICAL LETTERS (2020)

Add to Collection

Article Chemistry, Analytical

Hierarchical porous MXene/amino carbon nanotubes-based molecular imprinting sensor for highly sensitive and selective sensing of fisetin

Xue Ma et al.

SENSORS AND ACTUATORS B-CHEMICAL (2020)

Add to Collection

Article Engineering, Chemical

Fe3O4/SiO2/CS surface ion-imprinted polymer modified glassy carbon electrode for highly sensitivity and selectivity detection of toxic metal ions

Pengju Wei et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2020)

Add to Collection

Article Chemistry, Analytical

Molecularly Imprinted Poly(thionine)-Based Electrochemical Sensing Platform for Fast and Selective Ultratrace Determination of Patulin

Qingwen Huang et al.

ANALYTICAL CHEMISTRY (2019)

Add to Collection

Review Urology & Nephrology

Prevention of complications from use of conventional immunosuppressants: a critical review

Claudio Ponticelli et al.

JOURNAL OF NEPHROLOGY (2019)

Add to Collection

Article Chemistry, Analytical

A highly sensitive and selective electrochemical sensor based on polydopamine functionalized graphene and molecularly imprinted polymer for the 2,4-dichlorophenol recognition and detection

Yangyang Liu et al.

TALANTA (2019)

Add to Collection

Article Chemistry, Analytical

Ultrasensitive ciprofloxacin assay based on the use of a fluorescently labeled aptamer and a nanocomposite prepared from carbon nanotubes and MoSe2

Xiaobing Hu et al.

MICROCHIMICA ACTA (2019)

Add to Collection

Article Chemistry, Analytical

Monodisperse molecularly imprinted microsphere cartridges coupled with HPLC for selective analysis of dexamethasone and hydrocortisone in cosmetics by using matrix solid-phase dispersion

Pengqi Guo et al.

ANALYTICAL METHODS (2019)

Add to Collection

Article Materials Science, Textiles

An investigation on the comparison of wet spinning and electrospinning: Experimentation and simulation

Shixin Jin et al.

FIBERS AND POLYMERS (2017)

Add to Collection

Article Chemistry, Applied

Development of an indirect competitive enzyme-linked immunosorbent assay and immunochromatographic assay forhydrocortisone residues in milk

Zhongxing Wang et al.

FOOD AND AGRICULTURAL IMMUNOLOGY (2017)

Add to Collection

Article Chemistry, Analytical

A multi-walled carbon nanotubes based molecularly imprinted polymers electrochemical sensor for the sensitive determination of HIV-p24

Ya Ma et al.

TALANTA (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Low electrical percolation threshold of silver and copper nanowires in polystyrene composites

Genaro A. Gelves et al.

ADVANCED FUNCTIONAL MATERIALS (2006)

Add to Collection

Review Immunology

Stress-induced immunomodulation and the implications for health

EV Yang et al.

INTERNATIONAL IMMUNOPHARMACOLOGY (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.