☆ 4.7 Article

Sandwich structured chitosan-aerogel nonwoven filter with asymmetric wettability and pore size differences for high-efficient oil-mist filtration

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2023)

Related references

Note: Only part of the references are listed.

Article Environmental Sciences

Adverse pulmonary impacts of environmental concentrations of oil mist particulate matter in normal human bronchial epithelial cell

Chia-Hsiang Lai et al.

Summary: The particle size of OMPM is associated with the risk of lung diseases, and exposure to OMPM1.0 may increase the risk of chronic obstructive pulmonary disease. Occupational exposure to OMPM may cause pulmonary diseases at very low concentrations.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

Add to Collection

Review Energy & Fuels

Research on Oil Mist Leakage of Bearing in Hydropower Station: A Review

Jie Sun et al.

Summary: This paper provides some relevant insights and solutions to address the issue of oil mist leakage in hydroelectric power stations, including traditional engineering measures and the application of numerical simulation.

ENERGIES (2022)

Add to Collection

Article Engineering, Chemical

Solvent remelted nylon polyamide nanofibrous substrate that enhances thin-film composite membranes for organic solvent nanofiltration

Yi-Chen Wang et al.

Summary: Organic solvent nanofiltration (OSN) is a new paradigm technology for small-molecule separation in organic solvent systems. This study successfully constructed a high-performance composite membrane by preparing solvent-resistant nanofibrous substrates and optimizing their physical properties, achieving high permeability and rejection properties.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Review Engineering, Environmental

Hydrogel materials for sustainable water resources harvesting & treatment: Synthesis, mechanism and applications

Zhibin Zhang et al.

Summary: With the development of global industry and the increase of population, the shortage of freshwater resources has become a pressing issue, leading to extensive research on advanced water treatment and water harvesting technologies. Hydrogel, as a polymer material with excellent properties such as water absorption, water retention, and adsorption, has been widely used in water resources harvesting and treatment. This review provides an overview of the synthetic routes of hydrogel materials, the mechanisms of water absorption and desorption, and the recent research progress in atmospheric water harvesting, seawater desalination, and wastewater treatment using hydrogel materials.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Construction & Building Technology

Exposure levels of oil mist particles under different ventilation strategies in industrial workshops

Xin Wang et al.

Summary: This study conducted field investigations on processing workshops to evaluate the control effect of existing ventilation strategies on oil mist particles, and proposed the concept of unit emission rate index for reference in ventilation design. The relationship between air change rate and workshop concentration of oil mist particles was investigated, and the influence of process emission rate and ventilation mode on mass concentration was discussed, providing data support for optimizing ventilation strategies and guiding ventilation design and evaluation of industrial buildings.

BUILDING AND ENVIRONMENT (2021)

Add to Collection

Article Chemistry, Physical

Multi-functional flame-retardant superhydrophobic ceramic fiber felt: Oil/Water mixture separation and oil mist interception

Yue Hua et al.

Summary: Efficient and flame-retardant superhydrophobic ceramic fiber felt (SCFF) was successfully prepared by chemical vapor modification (CVD) to achieve excellent oil/water mixture separation and oil mist interception performance. The modified surfaces remained highly water repellent with stable performance, showing promising application potential in oil spill remediation and high-temperature oil mist interception.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Add to Collection

Article Thermodynamics

Frosting and defrosting on the hydrophilic nylon-6 nanofiber membrane-coated surfaces

Ching-Wen Lo et al.

Summary: The study proposed using a hydrophilic nylon-6 nanofiber membrane coating to enhance deicing, which can be easily made by electrospinning. The membrane with ice nucleation sites on it can quickly remove the formed ice layer. The substantial improvement in deicing ability indicates the potential for practical applications.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Fabrication of toughest and transparent electrospun nylon 6 nanofiber-reinforced PVA composites

Vishal Gavande et al.

Summary: In this study, void-free composites of electrospun nylon 6 nanofibers were manufactured as reinforcement for the poly(vinyl alcohol) (PVA) matrix using solution impregnation and filtration methods. The introduction of nylon 6 nanofiber mats as reinforcement synergistically improved mechanical efficiency for the PVA matrix. Optimal enhancement in ultimate tensile stress and tensile modulus was achieved by sacrificing elongation in the composite films with a 15 wt% polymer solution.

MOLECULAR CRYSTALS AND LIQUID CRYSTALS (2021)

Add to Collection

Article Engineering, Environmental

Ultralight, hydrophobic, sustainable, cost-effective and floating kapok/microfibrillated cellulose aerogels as speedy and recyclable oil superabsorbents

Huimin Zhang et al.

Summary: Cellulose aerogels with kapok/microfibrillated cellulose (MFC) exhibit ultralow density, ultrahigh porosity, and hydrophobicity, enabling advanced oil sorption and high absorption ability. These aerogels are cost-effective, sustainable, and possess excellent reusability, making them a suitable alternative for cleaning oil spills.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Engineering, Industrial

Oil mist concentration and machining characteristics of SiO2 water-based nano-lubricants in electrostatic minimum quantity lubrication-EMQL milling

Tao Lv et al.

Summary: EMQL using SiO2 water-based nano-lubricant as cutting fluid shows better chargeability, penetrability, adsorption and deposition capacity compared to traditional vegetable oil MQL, resulting in reduced oil mist content in the machining environment and presenting alternative cutting performance.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

Add to Collection

Article Engineering, Chemical

Oil-mists coalescence performance of fibrous filters with superoleophilic and superoleophobic surface

Chengwei Xu et al.

Summary: The study found that employing superoleophilic treatment in filters can reduce pressure drop and improve filtration efficiency, while the combination of superoleophilic and superoleophobic filters with drainage strategy did not show significant advantages. An appropriate rank of drainage layer could enhance drainage rate at unsaturation stage.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2021)

Add to Collection

Article Chemistry, Physical

Reduction in oil mist filtration resistance using novel fibrous filters with bioinspired fibrous membrane

Yufeng Liu et al.

Summary: The use of bioinspired fibrous membrane can significantly reduce the pressure drop of oil mist filters, enhance their quality factors, and help reduce energy consumption.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Add to Collection

Article Geosciences, Multidisciplinary

Drivers of PM2.5 air pollution deaths in China 2002-2017

Guannan Geng et al.

Summary: The study found that emission controls avoided approximately 870,000 deaths in China between 2002 and 2017, but further improvements in air quality require energy-climate policies and changes in economic structure. Analysis showed that end-of-pipe control policies significantly reduced PM2.5-related deaths in China, with mandated emission control technologies avoiding nearly three-quarters of the deaths that would have occurred due to increased economic activity.

NATURE GEOSCIENCE (2021)

Add to Collection

Article Engineering, Chemical

A multiphase multicomponent flow and transport model for liquid aerosol filtration in coalescing fibrous filters

M. Starnoni et al.

Summary: A new multiphase multicomponent framework is presented for modeling dynamic filtration processes at the Darcy-scale, validated through simulations replicating experimental conditions. The model demonstrates accuracy and robustness under various operational conditions.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

An environmentally friendly fluorine-free sandwich coating based on a nonwoven fabric for efficient unidirectional water transport

Songnan Zhang et al.

Summary: The research successfully developed a nonwoven material with efficient unidirectional water transport function through a three-layer stacking sandwich coating method, solving the problems of hydrophobic stability and air permeability in textiles, which is expected to promote the application of rubber and silica nanoparticles in high-efficiency waterproof functional fabrics.

CHEMICAL COMMUNICATIONS (2021)

Add to Collection

Review Environmental Sciences

Application of k-means and hierarchical clustering techniques for analysis of air pollution: A review (1980-2019)

P. Govender et al.

ATMOSPHERIC POLLUTION RESEARCH (2020)

Add to Collection

Article Engineering, Chemical

Perfluorinated superhydrophobic and oleophobic SiO2@PTFE nanofiber membrane with hierarchical nanostructures for oily fume purification

Xiao Zhu et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

Add to Collection

Review Public, Environmental & Occupational Health

Environmental and Health Impacts of Air Pollution: A Review

Ioannis Manisalidis et al.

FRONTIERS IN PUBLIC HEALTH (2020)

Add to Collection

Editorial Material Environmental Sciences

Mitigation strategies for reducing air pollution

Daniele Sofia et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2020)

Add to Collection

Article Oncology

Outdoor air pollution and cancer: An overview of the current evidence and public health recommendations

Michelle C. Turner et al.

CA-A CANCER JOURNAL FOR CLINICIANS (2020)

Add to Collection

Article Engineering, Chemical

Relevance of downstream support structure design for oleophilic and oleophobic oil mist filter operating performance

T. Penner et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Add to Collection

Article Engineering, Chemical

Impact of operating conditions on the evolution of droplet penetration in oil mist filters

T. Penner et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Robust Lignin-Based Aerogel Filters: High-Efficiency Capture of Ultrafine Airborne Particulates and the Mechanism

Zhihui Zeng et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Chemistry, Multidisciplinary

High-Efficiency Low-Resistance Oil-Mist Coalescence Filtration Using Fibrous Filters with Thickness-Direction Asymmetric Wettability

Xin Wei et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Energy & Fuels

Numerical Simulation and Experimental Research on Oil Mist Overflowing for a Giant Hydropower Generator

Yangbing Deng et al.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2019)

Add to Collection

Review Chemistry, Physical

Liquid mobility on superwettable surfaces for applications in energy and the environment

Songnan Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Materials Science, Paper & Wood

Robust and durable superhydrophobic cotton fabrics via a one-step solvothermal method for efficient oil/water separation

Quan-Yong Cheng et al.

CELLULOSE (2019)

Add to Collection

Article Chemistry, Physical

Efficient removal of aerosol oil-mists using superoleophobic filters

Xin Wei et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Toxicology

Classification, Source, and Effect of Environmental Pollutants and Their Biodegradation

Blessy Baby Mathew et al.

JOURNAL OF ENVIRONMENTAL PATHOLOGY TOXICOLOGY AND ONCOLOGY (2017)

Add to Collection

Article Engineering, Chemical

The role of mesopores in achieving high efficiency airborne nanoparticle filtration using aerogel monoliths

Sung Jun Kim et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2016)

Add to Collection

Article Engineering, Chemical

Consecutive filtration of solid particles and droplets in fibrous filters

Jakub M. Gac et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2016)

Add to Collection

Article Multidisciplinary Sciences

Transparent air filter for high-efficiency PM2.5 capture

Chong Liu et al.

NATURE COMMUNICATIONS (2015)

Add to Collection

Article Thermodynamics

Thermal performance of oil spray cooling system for in-wheel motor in electric vehicles

Dong Hyun Lim et al.

APPLIED THERMAL ENGINEERING (2014)

Add to Collection

Article Mechanics

Pressure drop and liquid transport through coalescence filter media used for oil mist filtration

D. Kampa et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2014)

Add to Collection

Article Environmental Sciences

Human health effects of air pollution

Marilena Kampa et al.

ENVIRONMENTAL POLLUTION (2008)

Add to Collection

Article Engineering, Industrial

An assessment of the applicability of cold air and oil mist in surface grinding

T Nguyen et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)

Add to Collection

Article Polymer Science

Transport properties of electrospun nylon 6 nonwoven mats

YJ Ryu et al.

EUROPEAN POLYMER JOURNAL (2003)

Add to Collection

Review Medicine, General & Internal

Air pollution and health

B Brunekreef et al.

LANCET (2002)

Add to Collection

Article Engineering, Chemical

Removal of aerosols by bubbling through porous media submerged in organic liquid

IE Agranovski et al.

CHEMICAL ENGINEERING SCIENCE (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.