Related references
Note: Only part of the references are listed.In vitro bio-corrosion behaviors of biodegradable AZ31B magnesium alloy under static stresses of different forms and magnitudes
Linyuan Han et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2023)
Effects of inorganic ions, organic particles, blood cells, and cyclic loading on in vitro corrosion of Mg -Al alloys
Guanqi Liu et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2023)
Initial micro-galvanic corrosion behavior between Mg2Ca and α-Mg via quasi- in situ SEM approach and first-principles calculation
Chen Xu et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2023)
In vitro and in vivo evaluation of micro-alloyed magnesium for potential application in alveolar bone fixation screws
Hongyan Tang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2023)
The effects of orientation control via tension-compression on microstructural evolution and mechanical behavior of AZ31 Mg alloy sheet
Qingshan Yang et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2022)
Effect of extrusion on the microstructure and corrosion behavior of Mg-Zn-Mn-(0,1.5)Sr alloys in Hank's solution
Li Lei et al.
CORROSION SCIENCE (2022)
Kinetics of the hydrogen absorption and desorption processes of hydrogen storage alloys: A review
Qian Li et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2022)
Effect of crystallographic texture and twinning on the corrosion behavior of Mg alloys: A review
Ehsan Gerashi et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2022)
A comprehensive review on biocompatible Mg-based alloys as temporary orthopaedic implants: Current status, challenges, and future prospects
Darothi Bairagi et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2022)
Unveiling the mechanical response and accommodation mechanism of pre-rolled AZ31 magnesium alloy under high-speed impact loading
Xiao Liu et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2022)
Recent advances in hydrothermal modification of calcium phosphorus coating on magnesium alloy
Lei Ling et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2022)
Alloying design and microstructural control strategies towards developing Mg alloys with enhanced ductility
Zhong-Zheng Jin et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2022)
Local galvanic corrosion analysis on cast Mg-Ca binary alloy using scanning Kelvin probe force microscopy
Katsuyoshi Kondoh et al.
MATERIALS LETTERS (2022)
New insight into the role of microscale residual stresses on initial corrosion behavior of Ti35 alloy
Jianping Xu et al.
CORROSION SCIENCE (2022)
Effect of extrusion parameters on degradation of magnesium alloys for bioimplant applications: A review
Mahdi Shiri et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2022)
The mechanisms of grain growth of Mg alloys: A review
Qinghua Chen et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2022)
Effect of dynamic recrystallization on texture orientation and grain refinement of Ti6Al4V titanium alloy subjected to laser shock peening
Xinlei Pan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Formation of abnormal coarse grains and its effects on corrosion behaviors of solution treated ZK60 Mg alloy
Jianwei Tang et al.
CORROSION SCIENCE (2021)
Thermodynamics and kinetics of hydriding and dehydriding reactions in Mg-based hydrogen storage materials
Qian Li et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2021)
Effect of microstructural evolution and texture change on the in-vitro bio-corrosion behaviour of hard-plate hot forged Mg-4Zn-0.5Ca-0.16Mn (wt%) alloy
P. Duley et al.
CORROSION SCIENCE (2021)
Biodegradable Mg alloys for orthopedic implants - A review
Violeta Tsakiris et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2021)
Effect of grain size and crystal orientation on the corrosion behavior of as-extruded Mg-6Gd-2Y-0.2Zr alloy
Yaofeng Luo et al.
CORROSION SCIENCE (2020)
Influence of specific second phases on corrosion behaviors of Mg-Zn-Gd-Zr alloys
Siqi Yin et al.
CORROSION SCIENCE (2020)
Thermodynamics and kinetics of phase transformation in rare earth-magnesium alloys: A critical review
Qun Luo et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Effect of strain on degradation behaviors of WE43, Fe and Zn wires
Kai Chen et al.
ACTA BIOMATERIALIA (2020)
Improving the corrosion resistance of MgZn1.2GdxZr0.18 (x=0, 0.8, 1.4, 2.0) alloys via Gd additions
Siqi Yin et al.
CORROSION SCIENCE (2020)
Magnesium extrusion alloys: a review of developments and prospects
Zhuoran Zeng et al.
INTERNATIONAL MATERIALS REVIEWS (2019)
Formation mechanism of abnormally large grains in a polycrystalline nickel-based superalloy during heat treatment processing
Xin Wang et al.
ACTA MATERIALIA (2019)
On the corrosion mechanism of Mg investigated by electrochemical impedance spectroscopy
Maurilio Pereira Gomes et al.
ELECTROCHIMICA ACTA (2019)
Improvement of mechanical properties and reduction of yield asymmetry of extruded Mg-Sn-Zn alloy through Ca addition
Yanfu Chai et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Effect of stress on corrosion of high-purity magnesium in vitro and in vivo
Yuanming Gao et al.
ACTA BIOMATERIALIA (2019)
Kinetics in Mg-based hydrogen storage materials: Enhancement and mechanism
Qun Luo et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2019)
Study of dynamic degradation behaviour of porous magnesium under physiological environment of human cancellous bone
Amir Putra Md Saad et al.
CORROSION SCIENCE (2018)
Correlation between electrochemical impedance measurements and corrosion rates of Mg-1Ca alloy in simulated body fluid
Yuxiang Liu et al.
ELECTROCHIMICA ACTA (2018)
Hall-Petch relationship in Mg alloys: A review
Huihui Yu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
An intrinsic correlation between driving force and energy barrier upon grain boundary migration
Bo Lin et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Exfoliation corrosion of extruded Mg-Li-Ca alloy
Zi-You Ding et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Review of magnesium-based biomaterials and their applications
Nurettin Sezer et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2018)
Uniaxial stress-driven grain boundary migration in Hexagonal Close-packed (HCP) metals: Theory and MD simulations
S. Tang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Effect of Li content on microstructure, texture and mechanical behaviors of the as-extruded Mg-Li sheets
Y. Zeng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
A study of long-term static load on degradation and mechanical integrity of Mg alloys-based biodegradable metals
Youngmi Koo et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2017)
Insight into the kinetic mechanism of the first-step dehydrogenation of Mg(AlH4)2
Yuepeng Pang et al.
SCRIPTA MATERIALIA (2017)
A study of long-term static load on degradation and mechanical integrity of Mg alloys-based biodegradable metals
Youngmi Koo et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2017)
Influence of load orientation and of types of loads on the mechanical properties of porous Ti6Al4V biomaterials
A. Cuadrado et al.
MATERIALS & DESIGN (2017)
Influence of crystallographic texture and grain size on the corrosion behaviour of as-extruded Mg alloy AZ31 sheets
Bin Jiang et al.
CORROSION SCIENCE (2017)
Effect of extrusion on corrosion properties of Mg-2Ca-χAl (χ=0, 2, 3, 5) alloys
Peng-peng Wu et al.
CORROSION SCIENCE (2017)
Corrosion resistance of a self-healing micro-arc oxidation/polymethyltrimethoxysilane composite coating on magnesium alloy AZ31
Lan-Yue Cui et al.
CORROSION SCIENCE (2017)
Effect of Crystallographic Orientation on the Corrosion of Magnesium: Comparison of Film Forming and Bare Crystal Facets using Electrochemical Impedance and Raman Spectroscopy
Leslie G. Bland et al.
ELECTROCHIMICA ACTA (2017)
Influence of strain on the corrosion of magnesium alloys and zinc in physiological environments
Karin Torne et al.
ACTA BIOMATERIALIA (2017)
Effect of alloyed Ca on the microstructure and corrosion properties of extruded AZ61 Mg alloy
Soo-Min Baek et al.
CORROSION SCIENCE (2016)
Effect of Texture on Biodegradable Behavior of an As-Extruded Mg-3%Al-1%Zn Alloy in Phosphate Buffer Saline Medium
Baojie Wang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2016)
High-speed extrusion of dilute Mg-Zn-Ca-Mn alloys and its effect on microstructure, texture and mechanical properties
M. G. Jiang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effects of tensile and compressive deformation on corrosion behaviour of a Mg-Zn alloy
Yang Zheng et al.
CORROSION SCIENCE (2015)
Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy
Kaka Ma et al.
ACTA MATERIALIA (2014)
Corrosion and characterisation of dual phase Mg-Li-Ca alloy in Hank's solution: The influence of microstructural features
Rong-Chang Zeng et al.
CORROSION SCIENCE (2014)
Accurate Electrochemical Measurement of Magnesium Corrosion Rates; a Combined Impedance, Mass-Loss and Hydrogen Collection Study
A. D. King et al.
ELECTROCHIMICA ACTA (2014)
In-vivo mitral annuloplasty ring transducer: Implications for implantation and annular downsizing
Andrew W. Siefert et al.
JOURNAL OF BIOMECHANICS (2013)
Assessing the corrosion of biodegradable magnesium implants: A critical review of current methodologies and their limitations
N. T. Kirkland et al.
ACTA BIOMATERIALIA (2012)
Crystal orientation and electrochemical corrosion of polycrystalline Mg
Guang-Ling Song et al.
CORROSION SCIENCE (2012)
Fatigue performance improvement in AISI 4140 steel by dynamic strain aging and dynamic precipitation during warm laser shock peening
Chang Ye et al.
ACTA MATERIALIA (2011)
Corrosion of high purity Mg, AZ91, ZE41 and Mg2Zn0.2Mn in Hank's solution at room temperature
Nor Ishida Zainal Abidin et al.
CORROSION SCIENCE (2011)
Development of novel grain morphology during hot extrusion of magnesium AZ21 alloy
M. A. Azeem et al.
ACTA MATERIALIA (2010)
Local and global electrochemical impedances applied to the corrosion behaviour of an AZ91 magnesium alloy
Gonzalo Galicia et al.
CORROSION SCIENCE (2009)
Biodegradable behaviors of AZ31 magnesium alloy in simulated body fluid
Yingwei Song et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2009)
The development of binary Mg-Ca alloys for use as biodegradable materials within bone
Zijian Li et al.
BIOMATERIALS (2008)
A three-dimensional finite element analysis of the combined behavior of ligaments and menisci in the healthy human knee joint
E. Pena et al.
JOURNAL OF BIOMECHANICS (2006)
Validation of corrosion rates measured by the Tafel extrapolation method
E McCafferty
CORROSION SCIENCE (2005)