Related references
Note: Only part of the references are listed.Toward accurate evaluation of bulk hardness from nanoindentation testing at low indent depths
Pengcheng Zhu et al.
MATERIALS & DESIGN (2022)
Activation volume and the role of solute atoms in Al-Mg-Si alloy processed by equal channel angular extrusion
Amel Soula et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2022)
Studying the Thermally Activated Processes Operating during Deformation of hcp and bcc Mg-Li Metal-Matrix Composites
Zuzanka Trojanova et al.
METALS (2021)
Grain Refinement Mechanisms in Gradient Nanostructured AZ31B Mg Alloy Prepared via Rotary Swaging
Xin Chen et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2021)
A High-Strength and Biodegradable Zn-Mg Alloy with Refined Ternary Eutectic Structure Processed by ECAP
He Huang et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2020)
Revealing the effect of minor Ca and Sr additions on microstructure evolution and mechanical properties of Zn-0.6 Mg alloy during multi-pass equal channel angular pressing
He Huang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
EBSD, XRD and SRS characterization of a casting Al-7wt%Si alloy processed by equal channel angular extrusion: Dislocation density evaluation
Zahra Zribi et al.
MATERIALS CHARACTERIZATION (2019)
Effects of thermal aging and low-fluence neutron irradiation on the mechanical property and microstructure of ferrite in cast austenitic stainless steels
Siwei Chen et al.
ACTA MATERIALIA (2019)
Implications of microstructure, Taylor factor distribution and texture on tensile properties in a Ti-added Fe-Mn-Al-Si-C steel
Arnab Sarkar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
A correlation between micro- and nano-indentation on materials irradiated by high-energy heavy ions
Yitao Yang et al.
JOURNAL OF NUCLEAR MATERIALS (2018)
Phase quantification in low carbon Nb-Mo bearing steel by electron backscatter diffraction technique coupled with kernel average misorientation
Yu-Wen Chen et al.
MATERIALS CHARACTERIZATION (2018)
Strain rate dependence of tensile strength and ductility of nano and ultrafine grained coppers
Yue Jiang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Influence of solute effects on the saturation grain size and rate sensitivity in Cu-X alloys
Enrico Bruder et al.
SCRIPTA MATERIALIA (2018)
Evolution of dislocations and twins in a strong and ductile nanotwinned steel
P. Zhou et al.
ACTA MATERIALIA (2016)
Effect of stacking fault energy on mechanical properties and annealing behavior of brasses
X. K. Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Variation of strain rate sensitivity of an aluminum alloy in a wide strain rate range: Mechanism analysis and modeling
S. L. Yan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Plastic deformation behavior during unloading in compressive cyclic test of nanocrystalline copper
Jiangjiang Hu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Tuning of nanostructure by the control of twin density, dislocation density, crystallite size, and stacking fault energy in Cu100-xZnx (0 ≤ 30 ≤ wt%)
B. Roy et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Microstructural evolution and mechanical properties of low SFE Cu-Al alloys processed by cryorolling followed by short-annealing
S. M. Dasharath et al.
MATERIALS & DESIGN (2016)
Dynamic recovery in nanocrystalline Ni
Z. Sun et al.
ACTA MATERIALIA (2015)
Assessment of geometrically necessary dislocation levels derived by 3D EBSD
P. J. Konijnenberg et al.
ACTA MATERIALIA (2015)
Growth Twins and Deformation Twins in Metals
Irene J. Beyerlein et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 44 (2014)
Evaluation of irradiation hardening of proton irradiated stainless steels by nanoindentation
Kiyohiro Yabuuchi et al.
JOURNAL OF NUCLEAR MATERIALS (2014)
Grain size effect on deformation twinning and detwinning
Y. T. Zhu et al.
JOURNAL OF MATERIALS SCIENCE (2013)
Effect of stacking fault energy on mechanical behavior of cold-forging Cu and Cu alloys
X. X. Wu et al.
MATERIALS & DESIGN (2013)
Twin intersection mechanisms in nanocrystalline fcc metals
F. Wu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Competing regimes of rate dependent plastic flow in ultrafine grained metals
Yannick Champion
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Critique of mechanisms of formation of deformation, annealing and growth twins: Face-centered cubic metals and alloys
S. Mahajan
SCRIPTA MATERIALIA (2013)
The effect of dislocation density on the interactions between dislocations and twin boundaries in nanocrystalline materials
S. Ni et al.
ACTA MATERIALIA (2012)
Deformation twins and related softening behavior in nanocrystalline Cu-30% Zn alloy
Hamed Bahmanpour et al.
ACTA MATERIALIA (2012)
The effect of stacking fault energy on equilibrium grain size and tensile properties of nanostructured copper and copper-aluminum alloys processed by equal channel angular pressing
C. X. Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Deformation twinning in nanocrystalline materials
Y. T. Zhu et al.
PROGRESS IN MATERIALS SCIENCE (2012)
Twin stability in highly nanotwinned Cu under compression, torsion and tension
A. M. Hodge et al.
SCRIPTA MATERIALIA (2012)
Detwinning, damage and crack initiation during cyclic loading of Cu samples containing aligned nanotwins
C. J. Shute et al.
ACTA MATERIALIA (2011)
Nanoindentation strain-rate jump tests for determining the local strain-rate sensitivity in nanocrystalline Ni and ultrafine-grained Al
Verena Maier et al.
JOURNAL OF MATERIALS RESEARCH (2011)
Microstructure and mechanical properties of Cu and Cu-Zn alloys produced by equal channel angular pressing
Z. J. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
The kinetics and energetics of dislocation mediated de-twinning in nano-twinned face-centered cubic metals
Yujie Wei
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
The influence of stacking fault energy on the mechanical properties of nanostructured Cu and Cu-Al alloys processed by high-pressure torsion
X. H. An et al.
SCRIPTA MATERIALIA (2011)
Nucleation and thickening of shear bands in nano-scale twin/matrix lamellae of a Cu-Al alloy processed by dynamic plastic deformation
C. S. Hong et al.
ACTA MATERIALIA (2010)
Detwinning mechanisms for growth twins in face-centered cubic metals
J. Wang et al.
ACTA MATERIALIA (2010)
Influence of stacking fault energy and alloying on stage V hardening of HPT-deformed materials
Martin Hafok et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2010)
Plastic flow stability of nanotwinned Cu foils
O. Anderoglu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2010)
Activation volume and deviation from Cottrell-Stokes law at small grain size
Cecilie Duhamel et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2010)
Nanostructural hierarchy increases the strength of aluminium alloys
Peter V. Liddicoat et al.
NATURE COMMUNICATIONS (2010)
A simple dislocation model of deformation resistance of ultrafine-grained materials explaining Hall-Petch strengthening and enhanced strain rate sensitivity
W. Blum et al.
ACTA MATERIALIA (2009)
Microstructural evolution and mechanical properties of Cu-Al alloys subjected to equal channel angular pressing
S. Qu et al.
ACTA MATERIALIA (2009)
Twinning partial multiplication at grain boundary in nanocrystalline fcc metals
Y. T. Zhu et al.
APPLIED PHYSICS LETTERS (2009)
Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale
K. Lu et al.
SCIENCE (2009)
Microstructural stability during cyclic loading of multilayer copper/copper samples with nanoscale twinning
C. J. Shute et al.
SCRIPTA MATERIALIA (2009)
Influence of stacking fault energy on deformation mechanism and dislocation storage capacity in ultrafine-grained materials
Z. W. Wang et al.
SCRIPTA MATERIALIA (2009)
Influence of stacking-fault energy on microstructural characteristics of ultrafine-grain copper and copper-zinc alloys
Levente Balogh et al.
ACTA MATERIALIA (2008)
Critical examination of strain-rate sensitivity measurement by nanoindentation methods:: Application to severely deformed niobium
Jon Alkorta et al.
ACTA MATERIALIA (2008)
Deformation twinning in bulk nanocrystalline metals: Experimental observations
Y. T. Zhu et al.
JOM (2008)
Evolution of defect structures during cold rolling of ultrafine-grained Cu and Cu-Zn alloys: Influence of stacking fault energy
Y. H. Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Estimation of lattice strain in nanocrystalline silver from X-ray diffraction line broadening
V. Biju et al.
JOURNAL OF MATERIALS SCIENCE (2008)
Equivalent twinning criteria for FCC alloys under uniaxial tension at high temperatures
Ahmed A. S. Mohammed et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Strain hardening due to deformation twinning in alpha-titanium: Mechanisms
AA Salem et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Influence of stacking fault energy on nanostructure formation under high pressure torsion
YH Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Study of deformation stacking faults and dislocation microstructures in Cu-1Sn-Zn alloys
SN Dey et al.
ACTA MATERIALIA (2005)
Grain refinement and superplasticity in an aluminum alloy processed by high-pressure torsion
G Sakai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Deformation twinning in nanocrystalline copper at room temperature and low strain rate
XZ Liao et al.
APPLIED PHYSICS LETTERS (2004)
Effect of nanocrystalline and ultrafine grain sizes on the strain rate sensitivity and activation volume: fcc versus bcc metals
Q Wei et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Shear band microtexture formation in twinned face centred cubic single crystals
H Paul et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
A dislocation model for the minimum grain size obtainable by milling
FA Mohamed
ACTA MATERIALIA (2003)
Size-dependent hardness in annealed and work hardened at-brass and aluminum polycrystalline materials using activation volume analysis
AA Elmustafa et al.
MATERIALS LETTERS (2003)
Dislocation processes in the deformation of nanocrystalline aluminium by molecular-dynamics simulation
V Yamakov et al.
NATURE MATERIALS (2002)
The onset of twinning in metals:: A constitutive description
MA Meyers et al.
ACTA MATERIALIA (2001)
The influence of stacking fault energy on the mechanical behavior of Cu and Cu-Al alloys: Deformation twinning, work hardening, and dynamic recovery
A Rohatgi et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2001)
Deformation texture transition in brass: Critical role of micro-scale shear bands
E El-Danaf et al.
ACTA MATERIALIA (2000)
X-ray diffraction analysis of stacking and twin faults in f.c.c. metals: a revision and allowance for texture and non-uniform fault probabilities
L Velterop et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2000)
Share Paper
