Related references
Note: Only part of the references are listed.
Article
Chemistry, Multidisciplinary
Jiao Zhang et al.
Summary: A new type of Ag2MoO4/ZnWO4 composite photocatalyst with a Z-scheme mechanism was developed by anchoring AMO nanoparticles onto ZWO nanorods. The performances and photocatalytic mechanism of the AMO/ZWO heterojunctions were studied through multiple characterization methods and DFT calculations. The enhanced photocatalytic mechanism of the AMO/ZWO heterojunctions was revealed to be the efficient separation of photocarriers via a Z-scheme transfer process, which was confirmed by simulated-sunlight-driven photodegradation experiments and DFT calculations.
Article
Chemistry, Physical
Wei Fan et al.
Summary: By developing an all-nanofiber PENG (ANF-PENG), the technical challenges of practicability, comfort, and antibacterial performance in wearable applications have been addressed. The ANF-PENG with a sandwich structure consisting of P(VDF-HFP)/ZnO electrospun nanofibers as the piezoelectric layer and P(VDF-HFP)/ZnO nanofiber membranes with Ag layer as the electrode layer, demonstrates high air permeability, antibacterial function, and sensitivity to human motion. It has great potential applications in flexible self-powered electronic wearables and body health monitoring.
Article
Materials Science, Multidisciplinary
Hongqin Li et al.
Summary: AuAg alloy nanoparticles were decorated on delta-Bi2O3 surface to obtain AuAg@delta-Bi2O3, and then AuAg@delta-Bi2O3 were hydrothermally combined with BiOBr plate to form Z-scheme AuAg@delta-Bi2O3/BiOBr. The photocatalytic activity of samples was evaluated under simulated sunlight irradiation, and the addition of delta-Bi2O3 significantly enhanced the photocatalytic activity of BiOBr. The introduction of AuAg nanoparticles further improved the photocatalytic activity, leading to highly efficient removal of pollutants. The presence of AuAg alloy nanoparticles at the interface of Z-scheme delta-Bi2O3/BiOBr promoted the separation of photogenerated charges through a Z-scheme charge migration mechanism.
Article
Engineering, Chemical
Pengwei Jia et al.
Summary: By utilizing the piezoelectric effect, a ferroelectric SrBi4Ti4O15/Ag2O p-n heterojunction catalyst is designed, leading to a significant enhancement of photocatalytic degradation. It can degrade 99.54% Rhodamine B within 6 minutes with an ultra-high degradation rate constant (k = 0.8949 min-1), which is 3.24 times of the photocatalytic degradation rate and 17.38 times of the piezocatalytic degradation rate. Additionally, this catalyst shows excellent degradation effect on other organic pollutants as well. This study provides valuable insights for designing efficient photocatalysts by coupling photocatalysis and piezoelectric effect.
SEPARATION AND PURIFICATION TECHNOLOGY
(2023)
Article
Acoustics
Kaiqi Wang et al.
Summary: This work designed and prepared a novel heterojunction composite NiO/BaTiO3 through a method of photo-deposition and used it in piezocatalytic dye removal for the first time. The results showed that the NiO/BaTiO3 composite exhibited superior efficiency and stability in RhB degradation under ultrasonic wave vibration. The optimized NiO/BaTiO3 sample synthesized under light irradiation for 2 h demonstrated a RhB degradation rate of 2.41 h-1, which was 6.3 times faster than that of pure BaTiO3. By optimizing the piezocatalytic reaction conditions, the degradation rate constant of NiO/BaTiO3 can further reach 4.14 h-1.
ULTRASONICS SONOCHEMISTRY
(2023)
Article
Chemistry, Multidisciplinary
Zhiwei Zhao et al.
Summary: In this study, an In-O-Cd bond-modulated S-scheme heterojunction of In2O3/CdSe-DETA was synthesized, which accelerated the photogenerated electron transfer. The oxygen vacancies (Vo) of In2O3 were found to have an electron capture effect. The synergistic effect of this structure extracted and rapidly transferred electrons to surface-active sites, improving the electronic coupling of CO2. This research provides new insights into photocatalytic CO2 reduction by precisely adjusting the electron transfer pathway and shortening the electron transfer distance.
ADVANCED FUNCTIONAL MATERIALS
(2023)
Article
Chemistry, Physical
Mohammad Bigdeli Tabar et al.
Summary: ZnSe/g-C3N4 nanocomposites with different concentrations of g-C3N4 have been used as photocatalytic materials, and it was found that ZnSe/g-C3N4 (10%) nanocomposites can degrade more than 97% of dye molecules. The band structure analysis showed that a type-II heterostructure was formed between ZnSe and g-C3N4.
APPLIED SURFACE SCIENCE
(2023)
Article
Materials Science, Ceramics
Zheng Wu et al.
CERAMICS INTERNATIONAL
(2023)
Article
Engineering, Environmental
Qinfang Jing et al.
Summary: The semiconductor n-p heterojunctions BiVO4/BiFeO3 (BVO/BFO) were designed to enhance piezo-photocatalytic processes and achieved ultra-high and stable catalytic performance. The degradation rate of Rhodamine B (RhB) solution reached 98%, which was 6.12 times higher than photocatalysis and 4.36 times higher than piezoelectric catalysis. The n-type BVO nanoparticles on the surface of p-type BFO enabled the formation of a built-in polarization field, resulting in improved carrier transport performances. The remarkable photo-piezoelectric properties of BVO/BFO heterojunctions provide valuable insights for efficient piezo-photocatalysis in environmental remediation.
CHEMICAL ENGINEERING JOURNAL
(2023)
Article
Chemistry, Physical
Pingyu Hao et al.
Summary: In this study, CdS/BiOCl S-scheme heterojunction piezocatalysts were constructed and their performances in piezocatalytic hydrogen evolution and organic pollutants degradation were explored. The optimal CdS content in CdS/BiOCl was found to be 20%, which exhibited a superior piezocatalytic hydrogen generation rate compared to pure BiOCl and CdS. CdS/BiOCl also showed the highest reaction kinetics rate constant and degradation rate towards various pollutants.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2023)
Article
Chemistry, Physical
Jiang Wu et al.
Summary: In this study, a magnetically retrievable Fe3O4@SiO2@ZnO nanocomposite was successfully synthesized, which consisted of vertically grown ZnO nanorods on the surface of magnetic Fe3O4@SiO2 microspheres. SiO2 served as an insulator to protect the core and inhibit charge transfer. The nanocomposite showed high efficiencies in piezocatalytic, photocatalytic, and piezo-photocatalytic dye degradation processes, with a rate constant of piezo-photocatalysis reaching 95.9 x 10-3 min-1.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2023)
Article
Engineering, Electrical & Electronic
Xin Yan et al.
Summary: In this study, a NaNbO3/g-C3N4 heterojunction photocatalyst was prepared and applied for efficient piezo-photocatalysis. The attachment of NaNbO3 nanowires to the g-C3N4 surface facilitated the degradation of rhodamine B by visible-light irradiation and ultrasonic vibration. The NaNbO3/g-C3N4 heterojunction exhibited a higher reaction rate constant and the primary active species for rhodamine B degradation was identified as center dot O-2(-). The enhanced performance was attributed to the formation of the heterojunction and the piezoelectric field of NaNbO3 nanowires promoting charge carriers separation efficiency.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
(2023)
Article
Materials Science, Multidisciplinary
Chaoli Chen et al.
Summary: A highly efficient and recyclable Bi2O2CO3 (BOC) adsorbent with excellent adsorption performance for removing organic pollutants and Cr(VI) ions has been developed using different surfactants during the hydrothermal synthesis of BOC nanostructures. The CTAB modified BOC sample (BOC-CTAB) demonstrates the highest adsorption performance and can be easily regenerated through a simple photodegradation process. The adsorption kinetics, isotherms and thermodynamics of methyl orange (MO) and Cr(VI) onto BOC-CTAB were systematically investigated.
MATERIALS RESEARCH BULLETIN
(2023)
Article
Chemistry, Multidisciplinary
Zuming He et al.
Summary: Water pollution caused by the massive use of medicines has led to significant environmental problems. This study synthesizes and characterizes yolk-shell microspheres composed of Cu7S4/CuCo2O4 (CS/CCO) using hydrothermal and annealing methods, and investigates their effectiveness in removing organic water pollutants. The 10-CS/CCO composite with yolk-shell microspheres shows the highest photodegradation rate of carbamazepine (CBZ), reaching 96.3% within 2 hours. The unique yolk-shell structure and Z-scheme charge transfer pathway contribute to the outstanding photocatalytic performance of the 10-CS/CCO composite.
Article
Chemistry, Analytical
Fuyan Wu et al.
Summary: In this study, a solar absorber was created by superimposing three periodic Ti-Al2O3-Ti discs on a W-Ti-Al2O3 composite film structure. The physical process of achieving broadband absorption was investigated using the finite difference in time domain (FDTD) method. The results demonstrated that the absorber achieved an average absorption efficiency ranging from 95.8% to 96% over a wavelength range of 200 to 3100 nm.
Article
Chemistry, Analytical
Runing Lai et al.
Summary: This paper introduces a novel metamaterial absorber based on surface plasmon resonance (SPR) that has triple-mode perfect absorption, polarization independence, incident angle insensitivity, tunability, high sensitivity, and a high figure of merit (FOM). The structure of the absorber consists of a graphene array, SiO2 layer, and a gold mirror. The absorber achieves perfect absorption at frequencies of 4.04 THz, 6.76 THz, and 9.40 THz, with absorption peaks of 99.404%, 99.353%, and 99.146%, respectively. It also demonstrates maximum sensitivities in refractive index sensing and has potential applications in photodetectors, optoelectronic devices, and chemical sensors.
Article
Chemistry, Multidisciplinary
Zheng Wu et al.
Summary: Pyroelectric materials can convert thermal energy into electrical energy. The use of 2D g-C3N4 nanosheets as catalysts can achieve efficient pyro-catalytic performance, which can be applied in wastewater treatment.
Article
Computer Science, Information Systems
Zihao Chen et al.
Summary: In this paper, the perfect absorption of the absorbent is achieved by using the surface plasmon resonance (SPR) method. A multi-frequency broadband absorber based on graphene SPR is proposed, which uses the continuous resonance of patterned graphene to achieve multi-frequency broadband absorption. The proposed structure model has potential value for application in terahertz photoelectric detection, filtering, and electromagnetic shielding.
Article
Chemistry, Physical
Shifa Wang et al.
Summary: A simple two-step method was developed to fabricate ternary heterojunctions of YMnO3/CeO2/MgAl2O4 composite photocatalysts, which exhibited good adsorption capacity and photocatalytic activity. The GA model showed the best predictive ability for the adsorption capacity. The YCM photocatalysts displayed high optical absorption coefficient, charge carrier transfer and separation efficiency, adsorbed oxygen concentration and interface defect, high adsorption capacity, and photocatalytic activity. This study demonstrated the huge potential of YCM composite photocatalysts for eco-friendly adsorption of dye and degradation of drugs.
APPLIED SURFACE SCIENCE
(2023)
Article
Chemistry, Physical
Jiao Zhang et al.
Summary: Rational design of heterostructures is an effective strategy for enhancing the photocatalytic activity of semiconductors. In this study, a dual Z-scheme CdS/ZWO/ZnS heterojunction photocatalyst was synthesized by assembling zero-dimensional CdS and ZnS quantum dots onto one-dimensional ZnWO4 nanorods. The photocatalytic experiments demonstrated that the dual Z-scheme heterojunction photocatalyst exhibited significantly higher photodegradation activity compared to individual CdS, ZnS, and binary CdS/ZWO and ZnS/ZWO heterojunctions. The characteristics and photocatalytic mechanism of the CdS/ZWO/ZnS photocatalysts were investigated using various measurement techniques and computational calculations.
APPLIED SURFACE SCIENCE
(2023)
Article
Engineering, Environmental
Jiangwen Bai et al.
Summary: Polarizations within ferroelectric or pizeoelectric materials promote interior photogenerated carriers separation, improving photocatalytic activity. However, pristine ferroelectric or pizeoelectric semiconductors are limited by insufficient polarization and spectral absorption. In this study, Bi4Ti3-2nCrnNbnO12/x-g-C3N4 (BTCNO-n/x-CN) heterojunctions were prepared by loading ultrathin g-C3N4 on ferroelectric BTCNO synthesized with co-doping of Cr3+-Nb5+ pairs. The doping not only enhances the piezoelectric performance of the heterojunctions but also promotes spectral absorption, leading to improved photocatalytic performance.
CHEMICAL ENGINEERING JOURNAL
(2023)
Article
Chemistry, Physical
Chaoli Chen et al.
Summary: Hierarchical microspheres of Bi2MoO6 (BMO) were synthesized using a solvothermal method with CTAB as surfactant. The synthesized BMO showed efficient and recyclable adsorption of organic pollutants, as demonstrated by investigating the adsorption kinetics, isotherms, and thermodynamics of methylene blue (MB) onto the BMO adsorbent. The BMO adsorbent can be easily regenerated via calcination in air and exhibits excellent reusability. Further studies showed its adsorption capability in removing various organic pollutants at different pH environments.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
(2023)
Article
Energy & Fuels
Umer Younas et al.
Summary: In this study, a WO3/TiO2/V2O5 catalyst was synthesized and characterized for the degradation of O-NP, MB, and MO pollutants. The results showed that the synthesized nanocomposite exhibited excellent photocatalytic potential, with degradation rates of up to 76%, 86%, and 86% for MB, MO, and O-NP, respectively.
Article
Chemistry, Physical
Tao Xian et al.
Summary: AuPt/BiOBr composite with AuPt alloy nanoparaticles decorated on BiOBr surface was prepared via photoreduction. It showed significantly enhanced photocatalytic degradation ability compared with Au/BiOBr, Pt/BiOBr, and bare BiOBr. The piezo-photocatalytic removal activity of AuPt/BiOBr towards tetracycline (TC) degradation was evaluated under simulated sunlight and ultrasound irradiation, and exhibited superior performance to individual piezo and photocatalytic results.
APPLIED SURFACE SCIENCE
(2023)
Article
Chemistry, Physical
Chenyu Li et al.
Summary: Novel 2D/2D g-C3N4/Bi4O5Br2 heterojunctions with optimized energy band configuration and van der Waals Z-scheme system were constructed, exhibiting excellent selective photocatalytic oxidation of benzyl alcohol under blue LED light. The reaction rate of the optimized sample was significantly higher than those of g-C3N4 or Bi4O5Br2 alone, with over 99% selectivity for benzaldehyde. The enhanced photocatalytic activity was attributed to the activation of molecular oxygen by the heterojunctions and the rational design of semiconductor band regulation.
APPLIED SURFACE SCIENCE
(2023)
Article
Chemistry, Physical
Dong-Hwang Chen et al.
Summary: The formation of p-n heterojunction is an effective strategy for developing high-performance photocatalysts. The coupling of piezoelectric potential can further improve the photocatalytic activity. In this study, a heterostructure of p-Ag2O nanoparticles and n-BiFeO3 nanowires was fabricated and shown to exhibit significantly higher performance for photocatalytic degradation and photoelectrochemical water splitting due to the efficient utilization of light and the enhanced separation of photoinduced charges. Moreover, simultaneous ultrasonication further enhanced the performance of the heterostructure, making it a promising piezo-photocatalyst.
APPLIED SURFACE SCIENCE
(2023)
Article
Thermodynamics
Ying Zheng et al.
Summary: In this study, a solar absorber and thermal emitter with ultra-broadband perfect absorption and high thermal radiation efficiency were designed. The absorber achieved a high absorption efficiency of 91.5% in the entire wavelength range and an average absorption efficiency of 99% in the selected range. The structure also exhibited excellent performance as a thermal emitter, with an optimal working temperature of 2000 K and a thermal radiation efficiency of 94.8%.
APPLIED THERMAL ENGINEERING
(2023)
Article
Energy & Fuels
Feng Qin et al.
Summary: The effect of double hole layer on the performance of PSCs was analyzed by theoretical calculation, and an optimized structure of PSCs was proposed. The addition of a CuO hole layer with an energy gap of 1.5 reduced direct recombination and increased FF, while Spiro-OMeTAD reduced electron recombination and increased Jsc. The proposed structure increased the PCE from 16.82% to 21.82%.
Article
Materials Science, Ceramics
Shifa Wang et al.
Summary: Various carbon-based MgAl2O4 (MAO) adsorbents were synthesized using ultrasound irradiation technology and different carbon sources. The optimal synthesis conditions were determined by studying the addition of different carbon types and mass ratios. The adsorption behavior of the carbon-based MAO adsorbents for different dyes and drugs was discussed, and various adsorption isotherm models were studied. The study demonstrated the potential of carbon-based MAO adsorbents as eco-friendly adsorbents for the removal of dyes and drugs.
CERAMICS INTERNATIONAL
(2023)
Article
Engineering, Chemical
Jianing Li et al.
Summary: The construction of a unique dual Z-scheme photocatalyst CW based on phase junction WO3 and CdS improved the photocatalytic efficiency for the degradation of IMD. The combination of phase junction and dual Z-scheme mechanism enhanced carrier utilization and redox potential, leading to significantly higher k(app) values compared to WO3 and CdS alone for IMD degradation. The trapping experiment and ESR confirmed the dual Z-scheme mechanism, while the analysis using LC-MS and DFT calculations provided detailed degradation pathways for IMD.
SEPARATION AND PURIFICATION TECHNOLOGY
(2022)
Article
Chemistry, Physical
Qiong Liu et al.
Summary: By synthesizing core-shell structured BaTiO3@TiO2 nanowires heterojunctions, this study achieved superior piezo-photocatalytic degradation performance and revealed the coupling mechanisms through photoelectrochemical measurements and band diagram analysis. The enhanced carrier concentration and improved charge lifetime due to the construction of a heterojunction between TiO2 and BT led to outstanding degradation of highly concentrated dyes.
Article
Chemistry, Physical
Zihan Kang et al.
Summary: This study investigates the role of carriers in piezocatalysis by studying the separation mode under a dynamic polarization field. The synthesized heterojunctions with unique core-shell structures show enhanced piezocatalytic efficiency, providing a reference for the design of efficient catalysts.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2022)
Article
Materials Science, Multidisciplinary
Tingting Cheng et al.
Summary: In this study, S element was doped into the surface of BTO crystals to enhance their photocatalytic activities in decomposing organic pollutants. The S-doped-BTO samples demonstrated improved visible-light adsorption and separation efficiency of photogenerated electron-hole pairs. Among the different x%S-BTO samples, 3.3%S-BTO showed the highest photocatalytic activity, with a performance 10.1 times higher than that of pristine BTO. The study also investigated the effects of inorganic anions and pH values on the photocatalytic performance of the optimal 3.3%S-BTO, as well as its photodegradation of other organic pollutants. The enhanced photocatalytic mechanism for the S-doped-BTO photocatalysts was proposed and discussed.
MATERIALS RESEARCH BULLETIN
(2022)
Article
Engineering, Chemical
Jiajia Long et al.
Summary: Piezocatalysis, which converts mechanical energy into chemical energy, is considered as an emerging technology for degradation of organic pollutants in water or air. In this study, BiFeO3@CdS nanofibers with heterostructure and enhanced piezoelectric response were prepared for efficient piezocatalytic degradation of organics in water.
SEPARATION AND PURIFICATION TECHNOLOGY
(2022)
Article
Chemistry, Multidisciplinary
Zheng Wu et al.
Summary: This research successfully utilizes two-dimensional graphite carbon nitride as a catalyst to convert nitrogen to mechanical energy through friction. With methanol as a positive charge scavenger, the ammonia generation rate of the catalyst reaches 100.56 mu mol center dot L-1 center dot g(-1)center dot h(-1), 3.91 times higher than without scavengers.
Article
Materials Science, Multidisciplinary
Xianqiang Chu et al.
Summary: This study presents the preparation of ordered Al-doped SrTiO3/TiO2 heterojunction nanorod arrays (Al-STO/TiO2 HNRAs) for efficient piezo-photocatalysis. The Al doping helps modulate the migration and separation of charge carriers and prolongs the charge lifetime. Under co-excitation of ultrasonic and ultraviolet irradiation, the Al-STO/TiO2 HNRAs display a significantly higher oxidation rate constant compared to the un-doped sample.
ADVANCED MATERIALS TECHNOLOGIES
(2022)
Article
Materials Science, Ceramics
Guifang Sun et al.
Summary: This study combines piezocatalysis and photocatalysis to achieve efficient piezo-photocatalytic activity. The optimized 1T/2H MS/BWO piezo-photocatalyst shows excellent degradation efficiency of diclofenac under the combined action of sunlight and ultrasound. The 1T/2H MS/BWO composite generates a strong polarization electric field to accelerate carrier separation and improve the piezo-photocatalytic activity. The 1T/2H MoSe2 also exhibits superior properties compared to 2H MoSe2.
CERAMICS INTERNATIONAL
(2022)
Article
Nanoscience & Nanotechnology
Tao Xian et al.
Summary: In this study, S-scheme In2O3/BiOBr heterojunction photocatalysts were synthesized through a hydrothermal route. The results showed that the photocatalytic performance of BiOBr was significantly enhanced after the decoration of In2O3 nanoparticles. The 8% In2O3/BiOBr sample exhibited the best photocatalytic activity and demonstrated outstanding synergistic photocatalytic performance for the removal of heavy metal ion/dye mixtures.
ACS APPLIED NANO MATERIALS
(2022)
Article
Engineering, Chemical
Chaoli Chen et al.
Summary: In this study, the pH-induced structural evolution of a bismuth molybdate photocatalyst was elucidated, and the photocatalytic performances of different samples were compared.
ADVANCED POWDER TECHNOLOGY
(2022)
Article
Chemistry, Physical
Ying Wang et al.
Summary: In this study, BiFeO3/Bi2Fe4O9 heterojunction hollow nanospheres were prepared and their enhanced photocatalytic activity for o-chlorophenol degradation was confirmed. The improved photocatalytic performance was attributed to the increased light absorption, enhanced charge separation, and selective adsorption-induced dechlorination of the heterojunction.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2022)
Article
Chemistry, Inorganic & Nuclear
Yanming Wang et al.
Summary: A highly efficient Z-scheme AMO/BOB heterojunction photocatalyst was successfully constructed, and its photocatalytic mechanism was analyzed through experiments and calculations. The results demonstrate significantly enhanced photodegradation activity of the AMO/BOB heterojunction in degrading methylene blue, as well as the potential application in degrading various organic pollutants.
DALTON TRANSACTIONS
(2022)
Article
Chemistry, Physical
Jiehong He et al.
Summary: A novel catalyst was developed by combining NiB amorphous alloy with In2O3 semiconductor, achieving high efficiency in CO2 hydrogenation under sunlight irradiation. This catalyst enhanced the quantum efficiency of photocatalytic CO2 hydrogenation by providing rich interfaces, promoting surface reactions, and facilitating CO2 hydrogenation through various mechanisms.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2021)
Article
Chemistry, Physical
Tingting Cheng et al.
Summary: This study demonstrates the flexoelectricity-enhanced mechanism of photocatalysis in Ag2MoO4, and further explores its potential application in environmental pollution degradation.
APPLIED SURFACE SCIENCE
(2021)
Article
Chemistry, Physical
Yaoyu Li et al.
Summary: A novel piezo-photocatalyst was synthesized in this study, which effectively improved the photocatalytic performance by modulating the polarization field of piezoelectric materials. The BaTiO3/La2Ti2O7 heterojunctions exhibited a stronger piezoelectric potential difference compared to pure BaTiO3, leading to enhanced charge separation and migration for efficient pollutant degradation under visible light.
APPLIED SURFACE SCIENCE
(2021)
Article
Chemistry, Physical
Jiayao Chen et al.
Summary: This study introduces a synergistic photopiezocatalysis using BiOIO3 to degrade organic pollutants, showing improved catalytic performance and high stability with reusability.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2021)
Review
Materials Science, Multidisciplinary
Hua Yang
Summary: This paper systematically discusses the properties, formation and performance regulation of heterojunction photocatalysts in different scenarios. The results indicate that the photocatalytic performance of heterojunctions highly depends on the characteristics of the constituent semiconductors, and all types of heterojunction photocatalysts are expected to exhibit enhanced photocatalytic effects.
MATERIALS RESEARCH BULLETIN
(2021)
Article
Chemistry, Physical
Zhenxing Zha et al.
Summary: A novel photocatalyst Carbon dots/BiOCl (CBOC) was successfully synthesized in this study, showing high efficiency and stability in the photodegradation of tetracycline. The chlorella-derived carbon dots made significant contributions to photocatalysis, paving the way for new applications of chlorella in this field.
JOURNAL OF ALLOYS AND COMPOUNDS
(2021)
Article
Engineering, Chemical
Jingtao Shen et al.
Summary: A novel In2O3/Ag2CO3 S-scheme heterojunction was synthesized and the transfer mechanism of photogenerated electrons was verified. The internal electric field facilitated the efficient separation of photogenerated electron-hole pairs, leading to high photodegradation and mineralization capabilities.
SEPARATION AND PURIFICATION TECHNOLOGY
(2021)
Article
Acoustics
Linkun Wang et al.
Summary: A novel piezoelectric catalyst, CoOx nanoparticles anchored BiFeO3 nanodisk composite, was intentionally synthesized and applied in the piezocatalytic degradation of RhB under ultrasonic vibration. The as-synthesized CoOx/BiFeO3 composite showed high piezocatalytic efficiency and stability, with the degradation rate being significantly increased through optimization of reaction conditions. The strong interaction between CoOx and BiFeO3 triggered the formation of a heterojunction structure, leading to improved piezocatalytic performance by retarding the recombination of electron-hole pairs.
ULTRASONICS SONOCHEMISTRY
(2021)
Editorial Material
Multidisciplinary Sciences
Fei He et al.
Summary: Photocatalytic air purification shows great promise, but faces challenges in practical applications despite significant research efforts.
NATURE COMMUNICATIONS
(2021)
Article
Materials Science, Multidisciplinary
Tianyan Zhong et al.
Summary: The new self-powered/self-cleaned atmosphere monitoring system fabricated from TiO2 nanoparticles combines hydrovoltaic, gas sensing, and photocatalytic effects. The system can work independently without electricity supply, using rainwater as fuel, and has the potential for various applications due to its unique capabilities.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
(2021)
Article
Materials Science, Multidisciplinary
Tingting Cheng et al.
Summary: This paper reports the piezocatalytic application of morphologically different Bi4Ti3O12 nanostructures for the degradation of various environmental pollutants. The synthesized Bi4Ti3O12 samples showed pronounced piezocatalytic degradation of pollutants, with the microplates exhibiting the highest performance. The study also investigated the effects of different parameters on the piezocatalytic degradation of pollutants.
MATERIALS RESEARCH BULLETIN
(2021)
Review
Biotechnology & Applied Microbiology
Ana Maria Leiva et al.
Summary: This study discusses the risks associated with the reuse of treated wastewater in agriculture, particularly focusing on the dissemination of antibiotic resistance genes and the potential health risks. The research found that different wastewater treatment technologies have varying capacities to reduce ARG dissemination. However, challenges such as operational parameters, plant design, and water quality need to be considered for safe reuse of TWW in agriculture.
REVIEWS IN ENVIRONMENTAL SCIENCE AND BIO-TECHNOLOGY
(2021)
Article
Chemistry, Physical
Yang Wang et al.
Summary: The strain-induced internal electric fields play a significant role in enhancing the separation of photoinduced electrons and holes, leading to a remarkable increase in the photocatalytic degradation efficiency of hybrid CNT/Bi4O5I2 under ultrasonic vibration. The CNT coating on Bi4O5I2 enhances the piezo-induced positive/negative migration, ultimately improving the piezocatalytic activity of the system.
Article
Chemistry, Multidisciplinary
Yu-Chun Wang et al.
ADVANCED FUNCTIONAL MATERIALS
(2020)
Article
Chemistry, Physical
Krishna K. Pawar et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2020)
Article
Chemistry, Physical
Zheng Wu et al.
APPLIED SURFACE SCIENCE
(2020)
Article
Engineering, Environmental
Yukun Sun et al.
CHEMICAL ENGINEERING JOURNAL
(2020)
Article
Engineering, Environmental
Yaocheng Deng et al.
CHEMICAL ENGINEERING JOURNAL
(2020)
Article
Materials Science, Ceramics
Eduardo A. Volnistem et al.
CERAMICS INTERNATIONAL
(2020)
Article
Green & Sustainable Science & Technology
Zihan Kang et al.
JOURNAL OF CLEANER PRODUCTION
(2020)
Article
Chemistry, Physical
Ran Tao et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2020)
Article
Chemistry, Physical
Yan Yu et al.
APPLIED SURFACE SCIENCE
(2020)
Article
Materials Science, Multidisciplinary
Di Wang et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS
(2020)
Article
Chemistry, Physical
Xingang Xu et al.
JOURNAL OF PHYSICAL CHEMISTRY C
(2020)
Article
Engineering, Environmental
Chaojun Zhang et al.
JOURNAL OF HAZARDOUS MATERIALS
(2020)
Article
Chemistry, Multidisciplinary
Mingxing Nie et al.
NEW JOURNAL OF CHEMISTRY
(2020)
Article
Environmental Sciences
Zhiyuan Wang et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT
(2019)
Article
Nanoscience & Nanotechnology
Dong Li et al.
ACS APPLIED MATERIALS & INTERFACES
(2018)
Article
Engineering, Environmental
Jianhua Tang et al.
CHEMICAL ENGINEERING JOURNAL
(2018)
Article
Chemistry, Multidisciplinary
Zijian Wang et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING
(2018)
Article
Chemistry, Physical
Jiang Wu et al.
Article
Chemistry, Physical
Haoxuan He et al.
Article
Nanoscience & Nanotechnology
Deyi Hong et al.
ACS APPLIED MATERIALS & INTERFACES
(2016)
Article
Chemistry, Physical
Xinyu Xue et al.
Article
Physics, Applied
L. Pedesseau et al.
APPLIED PHYSICS LETTERS
(2012)
Article
Engineering, Environmental
Lejin Xu et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY
(2012)
Article
Chemistry, Physical
Hua Ke et al.
JOURNAL OF ALLOYS AND COMPOUNDS
(2011)
Article
Chemistry, Physical
P. Rovillain et al.
Article
Multidisciplinary Sciences
T. Choi et al.
Article
Multidisciplinary Sciences
SP Ogawa et al.
Article
Physics, Applied
S Mukasa et al.
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS
(2004)
