☆ 4.7 Article

A and B sites doped CaAl12O19: Phase component, energy band, color and photoluminescence tuning, color performance prediction and application for pigments

SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2024)

Related references

Note: Only part of the references are listed.

Article Materials Science, Ceramics

Selective removal of antibiotics over MgAl2O4/C3N4/YMnO3 photocatalysts: Performance prediction and mechanism insight

Maoyuan Li et al.

Summary: A simple polyacrylamide gel method combined with low temperature sintering technology has been used to synthesize the C-O functional groups grafted MgAl2O4/C3N4/YMnO3 (MAO-CN-YMO) heterojunction photocatalysts with enhanced visible-light-induced photodegradation toward oxytetracycline hydrochloride (OTC-HCl).

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Constructing Z-scheme AuAg@?-Bi2O3/BiOBr multi-heterojunction for efficient photocatalytic removal of dye, antibiotic and heavy metal ions: Performance and mechanism investigation

Hongqin Li et al.

Summary: AuAg alloy nanoparticles were decorated on delta-Bi2O3 surface to obtain AuAg@delta-Bi2O3, and then AuAg@delta-Bi2O3 were hydrothermally combined with BiOBr plate to form Z-scheme AuAg@delta-Bi2O3/BiOBr. The photocatalytic activity of samples was evaluated under simulated sunlight irradiation, and the addition of delta-Bi2O3 significantly enhanced the photocatalytic activity of BiOBr. The introduction of AuAg nanoparticles further improved the photocatalytic activity, leading to highly efficient removal of pollutants. The presence of AuAg alloy nanoparticles at the interface of Z-scheme delta-Bi2O3/BiOBr promoted the separation of photogenerated charges through a Z-scheme charge migration mechanism.

OPTICAL MATERIALS (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Visible-light-enhanced photocatalytic activity of BaTiO3/γ-Al2O3 composite photocatalysts for photodegradation of tetracycline hydrochloride

Chuan Yu et al.

Summary: A polyacrylamide gel method combined with low temperature sintering technology was used to fabricate BaTiO3/gamma-Al2O3 composite photocatalysts with excellent photocatalytic activity for the degradation of tetracycline hydrochloride under simulated sunlight. The effects of BaTiO3/ gamma-Al2O3 mass percentages, drug concentrations and pH values on photocatalytic activity were investigated. The optimum conditions were found to be 5 wt% BaTiO3/ gamma-Al2O3, 50 mg/L drug concentration, and pH 6.77. The enhanced photocatalytic activity of BaTiO3/ gamma-Al2O3 was attributed to the defect states in alumina, interfacial defects between barium titanate and alumina, and the type II band arrangement structure.

OPTICAL MATERIALS (2023)

Add to Collection

Article Chemistry, Physical

Construction of CeO2/YMnO3 and CeO2/MgAl2O4/YMnO3 photocatalysts and adsorption of dyes and photocatalytic oxidation of antibiotics: Performance prediction, degradation pathway and mechanism insight br

Shifa Wang et al.

Summary: A simple two-step method was developed to fabricate ternary heterojunctions of YMnO3/CeO2/MgAl2O4 composite photocatalysts, which exhibited good adsorption capacity and photocatalytic activity. The GA model showed the best predictive ability for the adsorption capacity. The YCM photocatalysts displayed high optical absorption coefficient, charge carrier transfer and separation efficiency, adsorbed oxygen concentration and interface defect, high adsorption capacity, and photocatalytic activity. This study demonstrated the huge potential of YCM composite photocatalysts for eco-friendly adsorption of dye and degradation of drugs.

APPLIED SURFACE SCIENCE (2023)

Add to Collection

Article Chemistry, Physical

Development of highly-efficient 0D/1D/0D dual Z-scheme CdS/ZnWO4/ZnS heterojunction photocatalysts in pollutant removal and involved mechanism

Jiao Zhang et al.

Summary: Rational design of heterostructures is an effective strategy for enhancing the photocatalytic activity of semiconductors. In this study, a dual Z-scheme CdS/ZWO/ZnS heterojunction photocatalyst was synthesized by assembling zero-dimensional CdS and ZnS quantum dots onto one-dimensional ZnWO4 nanorods. The photocatalytic experiments demonstrated that the dual Z-scheme heterojunction photocatalyst exhibited significantly higher photodegradation activity compared to individual CdS, ZnS, and binary CdS/ZWO and ZnS/ZWO heterojunctions. The characteristics and photocatalytic mechanism of the CdS/ZWO/ZnS photocatalysts were investigated using various measurement techniques and computational calculations.

APPLIED SURFACE SCIENCE (2023)

Add to Collection

Article Chemistry, Physical

Enhancing the piezo-photocatalytic tetracycline degradation activity of BiOBr by the decoration of AuPt alloy nanoparaticles: Degradation pathways and mechanism investigation

Tao Xian et al.

Summary: AuPt/BiOBr composite with AuPt alloy nanoparaticles decorated on BiOBr surface was prepared via photoreduction. It showed significantly enhanced photocatalytic degradation ability compared with Au/BiOBr, Pt/BiOBr, and bare BiOBr. The piezo-photocatalytic removal activity of AuPt/BiOBr towards tetracycline (TC) degradation was evaluated under simulated sunlight and ultrasound irradiation, and exhibited superior performance to individual piezo and photocatalytic results.

APPLIED SURFACE SCIENCE (2023)

Add to Collection

Article Engineering, Chemical

A simple polyacrylamide gel route for the synthesis of MgAl2O4 nanoparticles with different metal sources as an efficient adsorbent: Neural network algorithm simulation, equilibrium, kinetics and thermodynamic studies

Hao Liu et al.

Summary: The study used a polyacrylamide gel method to prepare MgAl2O4 nanoparticles with different particle sizes for the removal of dyes from wastewater. A neural network prediction model was established to predict the effect of synthesis parameters on the phase purity of MgAl2O4. The adsorption experiments showed different adsorption performances of MgAl2O4 nanoparticles for Congo red, acid orange 7 and acid fuchsin under various experimental conditions.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Energy & Fuels

The modeling and products prediction for biomass oxidative pyrolysis based on PSO-ANN method: An artificial intelligence algorithm approach

Shanhui Zhao et al.

Summary: The experimental results showed that the reaction mechanism of oxidative pyrolysis was complex and influenced by the addition of oxygen. Using a combination of logsig and purelin as the transfer function for the hidden layer was suitable for modeling. Particle swarm optimization (PSO) significantly increased the prediction accuracy of the ANN model.

FUEL (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Structural, optical analysis, and Poole-Frenkel emission in NiO/CMC-PVP: Bio-nanocomposites for optoelectronic applications

Adel M. El Sayed et al.

Summary: In this study, high purity NiO nanoparticles were prepared and introduced into a CMC-PVP blend. The results showed that the dispersion of NiO nanoparticles inside the blend and their complexation with the functional groups in the blend influenced the film structure. The introduction of NiO nanoparticles also resulted in reduced transparency and modified reflectivity of the films. Additionally, the NiO nanoparticles improved the conductivity and refractive index of the films.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2022)

Add to Collection

Article Materials Science, Ceramics

Near-infrared reflective Ni, La-doped hibonite pigments for cool blue coatings

Robert Ianos et al.

Summary: Blue pigments based on Ni2+ and La3+- doped hibonite show high reflectance and act as cool pigments to prevent surface overheating. The combustion method used for their synthesis is fast and doesn't require annealing. Increasing the chromophore proportion leads to smaller crystallite size, darker color, and lower total solar reflectance.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Materials Science, Ceramics

A new approach to understanding the interaction effect of salt and plasticizer on solid polymer electrolytes using statistical model and artificial intelligence algorithm

Abdullahi Abbas Adam et al.

Summary: Solid polymer electrolytes (SPEs) based on natural biopolymeric macromolecules have great potential due to their abundance, low cost, biocompatibility, and biodegradability. However, their low ionic conductivity poses a challenge. In this study, response surface methodology (RSM) and artificial neural network (ANN) were used to optimize the performance of pectin/methylcellulose (PC/MC) based SPE complexed with potassium phosphate (K3PO4) and glycerol, resulting in improved conductivity and potential window.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2022)

Add to Collection

Article Materials Science, Ceramics

Monodisperse CaAl12O19:Mn4+ microspheres for full-spectrum white LEDs

Wei Zhang et al.

Summary: Non-rare-earth Mn4+-activated red-emitting oxide phosphors have been successfully prepared in the form of highly efficient CaAl12O19:Mn4+ microspheres. These phosphors exhibit red emission with high luminescent quantum yield, and have been applied in white LED devices.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Far-red-emitting Cr3+-doped CaAl12O19 phosphors with excellent color purity and good quantum efficiency for plant growth LEDs

Nguyen Thi Huyen et al.

Summary: Single-phase far-red-emitting CaAl12O19:x%Cr3+ phosphors were successfully synthesized using a sol-gel method. The optimized phosphors exhibit excellent optical properties and have the potential to be used in violet-pumped plant growth LEDs.

OPTICAL MATERIALS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

S-Scheme In2O3 Nanoparticle/BiOBr Nanoplate Heterojunctions for Improved Photocatalytic Dye Degradation and Cr(VI) Reduction

Tao Xian et al.

Summary: In this study, S-scheme In2O3/BiOBr heterojunction photocatalysts were synthesized through a hydrothermal route. The results showed that the photocatalytic performance of BiOBr was significantly enhanced after the decoration of In2O3 nanoparticles. The 8% In2O3/BiOBr sample exhibited the best photocatalytic activity and demonstrated outstanding synergistic photocatalytic performance for the removal of heavy metal ion/dye mixtures.

ACS APPLIED NANO MATERIALS (2022)

Add to Collection

Article Optics

FTIR and NIR spectroscopic analyses of Co3O4-doped sodium zinc borate glass matrix

Y. H. Elbashar et al.

Summary: In this study, borate glass samples were prepared using melt quenching technique and characterized by UV-VIS spectroscopy. The increase in optical properties such as refractive index, permittivity, and extinction coefficient was observed with the addition of Co3O4 content. Cobalt ions introduced into the glass produced a strong blue color and showed potential as optical filters in the UV-VIS region. The Fourier-transform infrared spectroscopy provided insights into the structural units and interaction between alkali metal ions and the borate glass network, with cobalt oxide addition converting some BO3 units to BO4 units. The cobalt-doped borate glass exhibited optical band pass filter properties.

JOURNAL OF OPTICS-INDIA (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

VASPKIT: A user-friendly interface facilitating high-throughput computing and analysis using VASP code

Vei Wang et al.

Summary: VASPKIT is a command-line program that provides a robust and user-friendly interface for high-throughput analysis of material properties. It consists of pre-and post-processing modules, can run on different platforms, and offers rich functionalities and a user-friendly interface.

COMPUTER PHYSICS COMMUNICATIONS (2021)

Add to Collection

Article Microbiology

Natural blue pigments and bikaverin

Marcela Colombo dos Santos et al.

Summary: The article reviews recent research on microbial sources of natural blue pigments, including eukaryotic algae, red algae, blue algae, and bacteria. It specifically mentions bikaverin, a blue pigment extracted from fungi, emphasizing its potential applications in the pharmaceutical and medical sectors.

MICROBIOLOGICAL RESEARCH (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Regulation of phase evolution of CaAl12O19 on properties of in-situ formed MgAl2O4-CaAl12O19 composites

Xiao-jun Wang et al.

Summary: MAeCA6 composites were fabricated in this study with the growth and development of CA6 grains improving the densification and flexural strength of the composites. The sintering temperature influenced the formation of MA and CA6 phases, as well as the apparent porosity and flexural strength of the samples. The suitable sintering temperature was determined not to exceed 1600 degrees C for optimal properties of the composites.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Phenylalanine Dipeptide-Regulated Ag/In2O3 Nanocomposites for Enhanced NO2 Gas Sensing at Room Temperature with UV Illumination

Zhihua Ying et al.

Summary: This study demonstrates that the introduction of phenylalanine dipeptide-regulated silver can improve gas sensing performance, showing promising potential for gas sensor applications.

ACS APPLIED NANO MATERIALS (2021)

Add to Collection

Article Chemistry, Applied

Inorganic-organic hybrid pigments based on carminic acid and clay minerals

Graycyelle R. S. Cavalcanti et al.

Summary: Hybrid pigments based on carminic acid stabilized by clay minerals were prepared and characterized using various techniques. The pigments showed different stability levels, with the hydrogels covered in polyorganosilane exhibiting the highest light stability.

DYES AND PIGMENTS (2021)

Add to Collection

Article Thermodynamics

Performance prediction of proton-exchange membrane fuel cell based on convolutional neural network and random forest feature selection

Weiwei Huo et al.

Summary: This paper utilizes deep learning techniques to design a performance prediction method for proton exchange membrane fuel cells, reducing unnecessary experiments and improving prediction accuracy to optimize performance. The proposed method combines random forest algorithm and convolutional neural networks, achieving good agreement with real data. This study demonstrates the effectiveness of using deep learning technologies for optimizing PEMFCs.

ENERGY CONVERSION AND MANAGEMENT (2021)

Add to Collection

Review Chemistry, Physical

Metal-organic framework derived Co3O4/TiO2 heterostructure nanoarrays for promote photoelectrochemical water splitting

Qijia Ding et al.

Summary: A new method was proposed to fabricate Co3O4 modified TiO2 nanorods photoelectrode, significantly improving the photoelectrochemical performance. The improved performance can be attributed to the constructed p-n heterostructure and the increased number of active sites derived from MOFs.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Article Chemistry, Physical

The Rise of Neural Networks for Materials and Chemical Dynamics

Maksim Kulichenko et al.

Summary: Machine learning is rapidly becoming a key tool for modeling chemical processes and materials, especially with the development of ML-based force fields for interatomic potentials. Designing high-quality training data sets is crucial for model accuracy, with strategies like active learning and using high levels of quantum theory to enhance training. Transfer learning allows for training on mixed fidelity data sets, showing significant improvements in model accuracy.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Improvement of optical properties of one-dimensional CaAl12O19:Mn4+ phosphor via Er3+- and Tb3+- doped bioactive glass powders

Sibel Oguzlar et al.

Summary: In this study, the red-emitting material CaAl12O19:Mn4+ phosphor (CAO: Mn) synthesized via sol-gel method was investigated in the presence of Er3+- and Tb3+-doped 13-93 bioactive glass powders. The addition of doped bioactive glass powders resulted in significant increases in emission intensity. The synthesized phosphor showed promising potential for addressing issues related to red phosphors in terms of brightness, color correlation temperature, and color rendering index.

OPTICAL MATERIALS (2021)

Add to Collection

Article Materials Science, Ceramics

Development of dense Sr-substituted CaA12O19 (CA6) ceramics synthesized by sol-gel combustion method

Sk S. Hossain et al.

Summary: By synthesizing CA(6) ceramics through the sol-gel auto combustion method, the study successfully achieved CA(6) phase formation at a lower temperature of 1200 degrees C compared to conventional processes. The substitution of Sr2+ ions into the lattice of CA(6) was found to improve densification and bring structural changes to the ceramics. The incorporation of Sr2+ up to a composition of x = 0.2 resulted in crystal growth and enhanced bulk density in the sintered specimens.

JOURNAL OF ASIAN CERAMIC SOCIETIES (2021)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Research on the quantum confinement effect and enhanced luminescence of red-emitting P5+-doped CaAl12O19:Mn4+,Mg2+ phosphors

Guodong Fan et al.

Summary: The study focused on Mn4+-activated oxide red phosphors to address the lack of red light components in white-light-emitting diodes (WLEDs). By doping high-valence P5+ into the phosphors, the photoluminescence quantum yield (PLQY) and luminescence intensity were significantly enhanced, while maintaining crystal phase structure. The formation of an electron trap with a quantum-confinement structure played a key role in improving PLQY, leading to superior thermal stability and color purity in the phosphor.

DALTON TRANSACTIONS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Structure characterization, optical and photoluminescence properties of scheelite-type CaWO4 nanophosphors: Effects of calcination temperature and carbon skeleton

Shifa Wang et al.

OPTICAL MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Tunable White-Light Emission of Co2+ and Mn2+ Co-Doped ZnS Nanoparticles by Energy Transfer between Dopant Ions

G. Saavedra-Rodriguez et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2020)

Add to Collection

Article Optics

Cobalt and iron co-doped ZnSe nanocrystals:Mid-IR luminescence at room temperature

Huawei Shi et al.

JOURNAL OF LUMINESCENCE (2020)

Add to Collection

Article Physics, Condensed Matter

Distinguishing between chemical bonding and physical binding using electron localization function (ELF)

Konstantinos Koumpouras et al.

JOURNAL OF PHYSICS-CONDENSED MATTER (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Preparation and properties of calcium hexaluminate blue ceramics

Guo Rui et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)

Add to Collection

Article Chemistry, Physical

Synthesis of Visible-Light-Driven SrAl2O4-Based Photocatalysts Using Surface Modification and Ion Doping

Shifa Wang et al.

RUSSIAN JOURNAL OF PHYSICAL CHEMISTRY A (2020)

Add to Collection

Article Materials Science, Ceramics

Sintering mechanism and properties of MgAl2O4-CaAl12O19 composites with ZnO addition

Xiao-jun Wang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Add to Collection

Article Optics

Synthesis and characterization of BaAl2O4: Ce and Mn-Ce-co-doped BaAl2O4 composite materials by a modified polyacrylamide gel method and prediction of photocatalytic activity using artificial neural network (ANN) algorithm

Shifa Wang et al.

OPTIK (2020)

Add to Collection

Proceedings Paper Polymer Science

Combustion Synthesis and Photoluminescence Studies of Blue-Emitting CaAl12O19:Ce3+Lamp Phosphors

V. R. Panse et al.

MACROMOLECULAR SYMPOSIA (2020)

Add to Collection

Article Materials Science, Ceramics

Luminescent properties of Zn2+-doped CaAl12O19:Mn4+ deep-red phosphor for indoor plant cultivation

Ying Zhao et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Materials Science, Ceramics

Irradiation assisted polyacrylamide gel route for the synthesize of the Mg1-xCoxAl2O4 nano-photocatalysts and its optical and photocatalytic performances

Shifa Wang et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Analytical

Study of luminescence properties of dysprosium-doped CaAl12O19 phosphor for white light-emitting diodes

Kapil Dev et al.

LUMINESCENCE (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Synergistic Effects of Optical and Photoluminescence Properties, Charge Transfer, and Photocatalytic Activity in MgAl2O4:Ce and Mn-Codoped MgAl2O4:Ce Phosphors

Shifa Wang et al.

JOURNAL OF ELECTRONIC MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Ordered two-dimensional porous Co3O4 nanosheets as electrocatalysts for rechargeable Li-O2 batteries

Yu Zhang et al.

NANO RESEARCH (2019)

Add to Collection

Article Engineering, Electrical & Electronic

One-step hydrothermal synthesis of CaWO4/α-Ag2WO4 heterojunction: An efficient photocatalyst for removal of organic contaminants

Chinnadurai Ayappan et al.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2019)

Add to Collection

Article Optics

Significant improved quantum yields of CaAl12O19:Mn4+ red phosphor by co-doping Bi3+ and B3+ ions and dual applications for plant cultivations

Yuejun Zhu et al.

JOURNAL OF LUMINESCENCE (2018)

Add to Collection

Article Materials Science, Ceramics

A new route for the preparation of CoAl2O4 nanoblue pigments with high uniformity and its optical properties

Huajing Gao et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Ultra-sensitive room-temperature H2S sensor using Ag-In2O3 nanorod composites

Shengnan Yan et al.

JOURNAL OF MATERIALS SCIENCE (2018)

Add to Collection

Review Chemistry, Inorganic & Nuclear

Colored oxides with hibonite structure II: Structural and optical properties of CaAl12O19-type pigments with chromophores based on Fe, Mn, Cr and Cu

Elena A. Medina et al.

PROGRESS IN SOLID STATE CHEMISTRY (2017)

Add to Collection

Article Multidisciplinary Sciences

Mechanism of superior luminescent and high-efficiency photocatalytic properties of Eu-doped calcium aluminate by low-cost self-propagating combustion synthesis technique

Jiancun Rao et al.

SCIENTIFIC REPORTS (2017)

Add to Collection

Article Chemistry, Applied

Environmental substitution for PbCrO4 pigment with inorganic-organic hybrid pigment

Lingyun Cao et al.

DYES AND PIGMENTS (2017)

Add to Collection

Article Materials Science, Ceramics

Electrospinning, optical properties and white LED applications of one-dimensional CaAl12O19:Mn4+ nanofiber phosphors

Ze Liu et al.

CERAMICS INTERNATIONAL (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Preparation and Properties of Carbon Dot-Grafted CaAl12O19:Mn4+ Color-Tunable Hybrid Phosphor

Wei Li et al.

ADVANCED OPTICAL MATERIALS (2016)

Add to Collection

Review Chemistry, Inorganic & Nuclear

Colored oxides with hibonite structure: A potential route to non-cobalt blue pigments

Jun Li et al.

PROGRESS IN SOLID STATE CHEMISTRY (2016)

Add to Collection

Article Engineering, Chemical

Low temperature synthesis of nanocrystalline calcium aluminate compounds with surfactant-assisted precipitation method

Atiyeh Ranjbar et al.

ADVANCED POWDER TECHNOLOGY (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Defect-induced ferromagnetism in undoped In2O3 nanowires

Li-Chia Tien et al.

MATERIALS RESEARCH BULLETIN (2014)

Add to Collection

Article Chemistry, Physical

Promoting Effects of In2O3 on Co3O4 for CO Oxidation: Tuning O2 Activation and CO Adsorption Strength Simultaneously

Yang Lou et al.

ACS CATALYSIS (2014)

Add to Collection

Article Chemistry, Physical

Role of pH, Organic Additive, and Chelating Agent in Gel Synthesis and Fluorescent Properties of Porous Monolithic Alumina

Shi-Fa Wang et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2013)

Add to Collection

Article Engineering, Electrical & Electronic

Optical, electrical and sensing properties of In2O3 nanoparticles

A. Ayeshamariam et al.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Fluorescence enhancement mechanism in phosphor CaAl12O19:Mn4+ modified with alkali-chloride

Yanan Li et al.

MICRO & NANO LETTERS (2013)

Add to Collection

Article Optics

Infrared, visible and upconversion emission of CaAl12O19 powders doped with Er3+, Yb3+ and Mg2+ ions

V. Singh et al.

APPLIED PHYSICS B-LASERS AND OPTICS (2012)

Add to Collection

Article Chemistry, Physical

Characterization of NiO nanoparticles by anodic arc plasma method

Zhiqiang Wei et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

Add to Collection

Article Materials Science, Ceramics

Synthesis of calcium hexaaluminate (CaAl12O19) via reverse micelle process

J. Chandradass et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2009)

Add to Collection

Article Materials Science, Ceramics

Ni-doped hibonite (CaAl12O19): A new turquoise blue ceramic pigment

G. Costa et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2009)

Add to Collection

Article Physics, Multidisciplinary

Surface structure of Sn-doped In2O3 (111) thin films by STM

Erie H. Morales et al.

NEW JOURNAL OF PHYSICS (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Interface reaction of Ta/NiO and its effect on exchange coupling

GH Yu et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.