☆ 4.7 Review

Synthesizing and formulating metal oxide nanoparticle inks for perovskite solar cells

CHEMICAL COMMUNICATIONS (2023)

Related references

Note: Only part of the references are listed.

Article Energy & Fuels

Solar cell efficiency tables (Version 61)

Martin A. Green et al.

Summary: This article presents consolidated tables that provide an extensive listing of the highest independently confirmed efficiencies for solar cells and modules. It outlines the guidelines for including results into these tables and reviews new entries since July 2022. The article also includes graphs showing the progress of each cell technology over the past 30 years and an updated list of designated test centers.

PROGRESS IN PHOTOVOLTAICS (2023)

Add to Collection

Article Energy & Fuels

Delafossite as hole transport layer a new pathway for efficient perovskite-based solar sells: Insight from experimental, DFT and numerical analysis

Amal Bouich et al.

Summary: In this study, a successful technique is proposed to produce delafossite materials as Hole Transport Layer (HTL) in inorganic lead halide Perovskite solar cells (PSCs). The effects of M cations, such as Al, Ga, Fe, Cr, Ni, Co, Cr, on the crystal structure, morphology, and optical properties of delafossite CuMO2 were investigated. Experimental and DFT calculations were conducted to analyze the electronic properties of the delafossite layers. Numerical analysis in SCAPS-1D software showed that the HTL delafossite layers achieved the highest power conversion efficiency (PCE%) of 22.90. This research provides a valuable direction for improving the performance of Perovskite-based solar cells (PSCs).

SOLAR ENERGY (2023)

Add to Collection

Article Chemistry, Physical

Revivification of nickel oxide-perovskite interfaces via nickel nitrate to boost performance in perovskite solar cells

Dilpreet Singh Mann et al.

Summary: Nickel nitrate is used to eliminate defect sites and hydroxyl groups on the surface of nickel oxide (NiOx), and a uniform and ultra-thin nickel nitride (NixN) layer is formed via spin coating at low temperatures. This approach improves the interface losses between NiOx and the perovskite layer, enhances charge extraction and transportation, and reduces charge recombination, resulting in high efficiency and long-term operational stability in perovskite solar cells (PSCs).

NANO ENERGY (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient Inverted Perovskite Solar Cells with a Fill Factor Over 86% via Surface Modification of the Nickel Oxide Hole Contact

Chunyan Li et al.

Summary: A reactive surface modification approach using in situ decomposition of urea on the nickel oxide (NiOx) surface is reported, resulting in improved interface quality between NiOx and halide perovskites. This strategy enables NiOx-based perovskite solar cells to achieve a champion power conversion efficiency of 23.61% and remain above 90% efficiency after 2000 hours of thermal aging.

ADVANCED FUNCTIONAL MATERIALS (2023)

Add to Collection

Article Energy & Fuels

Understanding Coating Thickness and Uniformity of Blade-Coated SnO2 Electron Transport Layer for Scalable Perovskite Solar Cells

Severin Siegrist et al.

Summary: The blade coating method can upscale the low-cost and solution-based perovskite photovoltaic devices. However, the control of charge transport layer thickness is challenging due to the inherent nature of the blade coating process. This study systematically investigates the film thickness and uniformity of blade-coated SnO2 colloidal dispersions in the Landau-Levich regime by varying substrate temperature, solution volume, solution concentration, and coating speed. The findings show that the advancing meniscus height heavily affects the SnO2 film thickness, and the dispensed solution volume can improve thickness uniformity.

SOLAR RRL (2023)

Add to Collection

Review Chemistry, Physical

Functional Layers of Inverted Flexible Perovskite Solar Cells and Effective Technologies for Device Commercialization

Zhiyuan Xu et al.

Summary: Perovskite solar cells (PSCs) are highly promising due to their high efficiency, low cost, and ease of fabrication. Flexible perovskite solar cells (FPSCs), specifically, are lightweight and bendable, making them suitable for wearable and portable electronics, space energy systems, and more. Inverted p-i-n FPSCs offer operational stability, reduced hysteresis effect, low-temperature fabrication, and potential for tandem devices. With PCEs reaching 21.76% and 24.7% for single-junction and tandem-inverted FPSCs respectively, commercial applications are highly anticipated. This review discusses the development of functional layers and technologies for accelerating the commercialization of inverted FPSCs, providing perspectives on their future development and commercialization.

SMALL STRUCTURES (2023)

Add to Collection

Article Nanoscience & Nanotechnology

Encapsulation and Outdoor Testing of Perovskite Solar Cells: Comparing Industrially Relevant Process with a Simplified Lab Procedure

Quiterie Emery et al.

Summary: Perovskite solar cells have great potential for next-generation photovoltaics, but their long-term stability under ambient conditions is a major obstacle to commercialization. Different encapsulation strategies are being developed to improve stability, with varying effectiveness under different testing conditions.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Solvation of NiO x for hole transport layer deposition in perovskite solar cells

Peter J. Armstrong et al.

Summary: A series of nickel oxide inks were prepared and used for the fabrication of p-i-n perovskite solar cells. The performance of the devices prepared using different alkyl xanthate ligands in the inks varied, with the devices prepared using the ink containing a longer chain ligand showing the best performance.

NANOTECHNOLOGY (2022)

Add to Collection

Article Multidisciplinary Sciences

Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells

Minjin Kim et al.

Summary: The study replaced the commonly used mesoporous titanium dioxide electron transport layer with a thin layer of polyacrylic acid-stabilized tin(IV) oxide quantum dots, which improved the efficiency and stability of perovskite solar cells and enabled successful scaling up of PSCs production.

SCIENCE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Field-Effect Control in Hole Transport Layer Composed of Li:NiO/NiO for Highly Efficient Inverted Planar Perovskite Solar Cells

Liang Zhao et al.

Summary: A new hole transport layer composed of Li:NiO/NiO bilayer film was developed to enhance hole transport efficiency in perovskite solar cells. The energy level alignment and additional drive forces generated in the HTL significantly improved carrier extraction and transport at the interface, leading to an improved power conversion efficiency and fill factor in the inverted planar PSC design.

ADVANCED MATERIALS INTERFACES (2022)

Add to Collection

Article Energy & Fuels

Scalable Flexible Perovskite Solar Cells Based on a Crystalline and Printable Template with Intelligent Temperature Sensitivity

Xia Yang et al.

Summary: This study introduces a liquid crystal 6OBA as an additive for printable and crystalline templates of scalable perovskite films. The optimized perovskite solar cells show high power conversion efficiency values and outstanding bending resistance.

SOLAR RRL (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Construction of Charge Transport Channels at the NiOx/Perovskite Interface through Moderate Dipoles toward Highly Efficient Inverted Solar Cells

Yuchao Hu et al.

Summary: This study focuses on improving the performance of NiOx-based perovskite solar cells by introducing 2-thiophenemethylamine (TPMA) at the interface. The results show that TPMA enhances the charge transportation, reduces the voltage loss, and increases the stability of the device. This research provides a new approach to simultaneously enhance the current and voltage in NiOx-based PSCs.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Chemistry, Multidisciplinary

NiOx Nanocrystals with Tunable Size and Energy Levels for Efficient and UV Stable Perovskite Solar Cells

Xiaxia Cui et al.

Summary: This study demonstrates a novel synthesis method for highly dispersed NiOx nanocrystals by using tetraalkylammonium hydroxides as precipitating bases. The size and energy levels of the nanocrystals can be controlled, leading to optimized NiOx thin films and improved efficiency and stability of perovskite solar cells.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

Room-temperature processed hole-transport layer in flexible inverted perovskite solar cell module

Ashique Kotta et al.

Summary: Metal oxide-based electrodes, particularly vanadium (V)-substituted NiO nanomaterial, have been found to enhance the electrical conductivity and improve the surface wetting of perovskite films in perovskite solar cells (PSCs). The presence of V5+ significantly boosts the electrical conductivity of the NiO film, promoting charge transport and reducing interfacial charge accumulation.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

Elimination of Interfacial Lattice Mismatch and Detrimental Reaction by Self-Assembled Layer Dual-Passivation for Efficient and Stable Inverted Perovskite Solar Cells

Jiaqi Zhang et al.

Summary: In this study, the issues of interfacial lattice mismatch and adverse reaction in nickel oxide-based inverted perovskite solar cells are addressed by using a self-assembled small molecule CBSA, achieving high conversion efficiency and excellent stability.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Doping Free and Amorphous NiOx Film via UV Irradiation for Efficient Inverted Perovskite Solar Cells

Qing Lian et al.

Summary: This study introduces an amorphous and dopant-free inorganic material, Ni3+-rich NiOx, prepared by a UV irradiation strategy, which shows improved conductivity and hole extraction ability, and achieves high efficiency in PSCs. The research fills the gap in preparing metal oxide films at low temperatures for inverted PSCs and enhances the understanding of inorganic materials as efficient carrier transport layers.

ADVANCED SCIENCE (2022)

Add to Collection

Review Chemistry, Physical

Ink Engineering in Blade-Coating Large-Area Perovskite Solar Cells

Jinxin Yang et al.

Summary: Organic-inorganic hybrid perovskite solar cells (PSCs) show great potential in industrial commercialization, but efficiency and stability decrease when scaling up the device area. Blade-coating methods have been developed to fabricate large-area PSCs with uniform perovskite films. Ink engineering plays an important role in blade-coating, especially for crystallinity and defect control. This review summarizes the blade-coating method for large-area perovskite films, perovskite ink engineering, and recent advances in functional layer ink engineering and hole transporting material-free carbon-based PSCs.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Energy & Fuels

Overcome Low Intrinsic Conductivity of NiOx Through Triazinyl Modification for Highly Efficient and Stable Inverted Perovskite Solar Cells

Jiabao Yang et al.

Summary: In this study, the researchers improved the performance and stability of inverted organic-inorganic metal halide perovskite solar cells by modifying the NiOx films with a triazine molecule.

SOLAR RRL (2022)

Add to Collection

Article Energy & Fuels

Blade-coated inverted perovskite solar cells in an ambient environment

Xinwen Zhang et al.

Summary: This study demonstrates the manufacturing of perovskite solar cells based on FACs using blade coating followed by vacuum quenching method in an ambient environment, and successfully solves the low efficiency issue of the hole transport material, achieving higher efficiency.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis methods of NiOx nanoparticles and its effect on hole conductivity and stability of n-i-p perovskite solar cells

Samane Pirzad Ghias Abadi et al.

Summary: In this study, nickel oxide nanoparticles with different synthesis routes were used as high-temperature nickel oxide and applied in perovskite solar cells. It was found that using nickel chloride hexahydrate as nickel reagent resulted in more desirable nickel oxide nanoparticles, leading to improved efficiency and stability of the solar cells.

SYNTHETIC METALS (2022)

Add to Collection

Article Engineering, Chemical

Spray-coated SnO2 electron transport layer with high uniformity for planar perovskite solar cells

Yaqin Wang et al.

Summary: The study demonstrates that SnO2 films prepared by spray coating can serve as stable and efficient ETLs for PSCs, enabling low-cost and large-scale production.

FRONTIERS OF CHEMICAL SCIENCE AND ENGINEERING (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Inorganic Electron Transport Materials in Perovskite Solar Cells

Liangyou Lin et al.

Summary: Over the past decade, there has been significant progress in the development of perovskite solar cells (PSCs), with improvements in power conversion efficiency and long-term stability making them competitive candidates for next-generation photovoltaics. This review focuses on the advancements in inorganic electron transport materials (ETMs) for PSCs, particularly the three most prevalent materials (TiO2, SnO2, and ZnO) and their applications in tandem devices. Strategies to optimize the performance of the electron transport layer (ETL) in PSCs and the impact of ETL on device stability and efficiency are also discussed.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Add to Collection

Article Multidisciplinary Sciences

Efficient perovskite solar cells via improved carrier management

Jason J. Yoo et al.

Summary: Metal halide perovskite solar cells have shown great potential to disrupt the silicon solar cell market with their improved performance, yet still face limitations in light-harvesting due to charge carrier recombination. Efforts to enhance charge carrier management offer a path to increase device performance and approach the theoretical efficiency limit of PSCs.

NATURE (2021)

Add to Collection

Article Energy & Fuels

ZnO for stable and efficient perovskite bulk heterojunction solar cell fabricated under ambient atmosphere

Sultan Ahmad et al.

Summary: This study reported the fabrication of perovskite (CH3NH3PbI3): Zinc Oxide (ZnO) bulk heterojunction (BHJ) solar cells under ambient air, demonstrating high power conversion efficiency and good stability.

SOLAR ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Recent Progress in the Semiconducting Oxide Overlayer for Halide Perovskite Solar Cells

Mun Young Woo et al.

Summary: The importance of charge transport layers in halide perovskite solar cells (HPSCs) is highlighted, with a focus on the potential advantages and challenges of semiconducting oxide over-layer materials (SOOMs) compared to organic semiconducting materials. The progress report discusses recent advances in SOOM deposition methods and outlines remaining challenges and future research directions for the commercialization of HPSCs.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

23.7% Efficient inverted perovskite solar cells by dual interfacial modification

Matteo Degani et al.

Summary: This study presents a dual interfacial modification approach by incorporating large organic cations at both the bottom and top interfaces of the perovskite active layer, leading to simultaneous improvement in both open-circuit voltage and fill factor of the devices, reaching a champion device efficiency of 23.7%. This dual interfacial modification is fully compatible with bulk modification of the perovskite active layer by ionic liquids, resulting in efficient and stable inverted architecture devices.

SCIENCE ADVANCES (2021)

Add to Collection

Article Chemistry, Physical

Synthesis of well dispersed NiO ink for efficient perovskite solar cells

Tonghui Guo et al.

Summary: The study focuses on the influence of anions on the formation of NiO NPs, revealing that suitable electrostatic interactions between anions and Ni2+ can lead to high crystallinity and good dispersity of NiO particles, resulting in high-quality NiO HTL and perovskite solar cells. The use of Ni(NO3)(2) to fabricate NiO HTL in PSCs showed a significantly higher performance of 18.4% compared to NiCl2, highlighting the importance of anions in the formation process of NiO NPs for high-performance PSCs fabrication.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Energy & Fuels

Photonic Curing of Nickel Oxide Transport Layer and Perovskite Active Layer for Flexible Perovskite Solar Cells: A Path Towards High-Throughput Manufacturing

Robert T. Piper et al.

Summary: The study demonstrates the use of photonic curing for efficient and rapid production of PSCs with satisfactory power conversion efficiencies. By optimizing the single-pulse photonic curing conditions, it paves the way for the high-throughput production of perovskite solar modules.

FRONTIERS IN ENERGY RESEARCH (2021)

Add to Collection

Article Chemistry, Physical

Tuning Ni3+quantity of NiO via doping of cations with varied valence states: The key role of Ni3+on the reactivity

Peiru Zheng et al.

Summary: The research reveals that different dopant cations can affect the surface Ni3+ generation in NiO catalysts, which in turn affects their reactivity. Li+ doping promotes the generation of Ni3+, while Zn2+ and Cr3+ doping decreases it. The quantity of surface Ni3+ is directly proportional and linearly related to the reactivity.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Energy & Fuels

Inorganic copper-based hole transport materials for perovskite photovoltaics: Challenges in normally structured cells, advances in photovoltaic performance and device stability

Jadel Tsiba Matondo et al.

Summary: The hole transport layer is crucial for achieving high efficiency and stability in perovskite solar cells. While organic materials can enhance efficiency, they pose stability and cost challenges. Research shows that inorganic copper-based HTMs demonstrate promising performance in both normal and inverted PSC architectures.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)

Add to Collection

Review Chemistry, Physical

A Review on Emerging Barrier Materials and Encapsulation Strategies for Flexible Perovskite and Organic Photovoltaics

Luke J. Sutherland et al.

Summary: Perovskite solar cells and organic photovoltaics have shown rapid development in the past decade, with high efficiency and flexibility. However, operational stability remains a challenge, particularly due to degradation from moisture and oxygen exposure. Barrier encapsulation is a promising solution for delaying degradation in flexible devices.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Energy & Fuels

Automated Fabrication of Perovskite Photovoltaics Using Inkjet Printing and Intense Pulse Light Annealing

Amir H. Ghahremani et al.

Summary: This research focuses on fabricating SnO2 and carbon charge transport films through an integrated robotic setup utilizing inkjet printing and intense pulse light (IPL) for high-speed postprocess annealing method, leading to successful fabrication of high-efficiency perovskite solar cells. The study also explores the role of inkjet deposition parameters and IPL annealing on film morphology and uniformity, and demonstrates potential for scalable fabrication of PSCs through non-roll-to-roll processes.

ENERGY TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Direct Deposition of Nonaqueous SnO2 Dispersion by Blade Coating on Perovskites for the Scalable Fabrication of p-i-n Perovskite Solar Cells

Sashil Chapagain et al.

Summary: This study overcame the limitations of solvent incompatibility and processing temperature by functionalizing SnO2 nanoparticles, successfully depositing them in p-i-n devices, achieving high power conversion efficiency.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Review Green & Sustainable Science & Technology

Perovskite Solar Cells: Current Trends in Graphene-Based Materials for Transparent Conductive Electrodes, Active Layers, Charge Transport Layers, and Encapsulation Layers

Edigar Muchuweni et al.

Summary: This study discusses the application of graphene-based materials in PSCs, presents recent research developments, and proposes future research directions.

ADVANCED ENERGY AND SUSTAINABILITY RESEARCH (2021)

Add to Collection

Article Nanoscience & Nanotechnology

In-Situ-Bloomed Micrometer-Scale Ultrathin Nanosheets in Tumor-Microenvironment for Intensive Photothermal-Enhanced Chemodynamic Therapy

Li Yang et al.

Summary: This study introduces micrometer-scale CoMn-based layered double hydroxide (CoMn-LDH) ultrathin nanosheets, derived from CoMn boride-based CMB@ss-SF nanospheres in response to overexpressed glutathione (GSH) and dissolved oxygen in tumor microenvironment (TME), achieving intensive photothermal-enhanced CDT.

ACS APPLIED BIO MATERIALS (2021)

Add to Collection

Review Chemistry, Physical

Recent progress in meniscus coating for large-area perovskite solar cells and solar modules

Ziyi Wu et al.

Summary: This review introduces the structure and advantages of meniscus coating for large-area perovskite solar cells, and systematically analyzes the key factors for improving the photovoltaic performances and stability of large-area PSCs.

SUSTAINABLE ENERGY & FUELS (2021)

Add to Collection

Article Chemistry, Physical

An in situ bifacial passivation strategy for flexible perovskite solar module with mechanical robustness by roll-to-roll fabrication

Hongyu Wang et al.

Summary: By soaking the NiOx-based hole transport layer in hydroiodic acid (HI) during R2R printing, an in situ bifacial passivation strategy was demonstrated to optimize the interface of perovskite solar cells, leading to improved power conversion efficiency and stability of the devices.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Chemistry, Physical

Artemisinin-passivated mixed-cation perovskite films for durable flexible perovskite solar cells with over 21% efficiency

Longkai Yang et al.

Summary: The use of artemisinin as a passivation material in flexible perovskite solar cells has significantly improved their performance by enhancing V-OC and FF, reducing nonradiative recombination, and achieving a high PCE of 21.10%. The interaction between artemisinin molecules and uncoordinated Pb2+ ions has been shown to suppress the formation of deep-level trap defects and Pb clusters, leading to excellent stability under various aging conditions.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Chemistry, Physical

An efficacious multifunction codoping strategy on a room-temperature solution-processed hole transport layer for realizing high-performance perovskite solar cells

Dan Ouyang et al.

Summary: This study demonstrates a novel room-temperature solution-processed Li and Cu co-doped NiOx nanoparticle-based hole transport layer, which improves electrical conductivity, optical transmittance, and facilitates the formation of high-quality perovskite films. With these multiple functions, the PSCs utilizing Li and Cu co-doped NiOx HTLs achieved high efficiencies on both rigid and flexible substrates.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Review Chemistry, Multidisciplinary

A review on the classification of organic/inorganic/carbonaceous hole transporting materials for perovskite solar cell application

Selvakumar Pitchaiya et al.

ARABIAN JOURNAL OF CHEMISTRY (2020)

Add to Collection

Review Chemistry, Multidisciplinary

To Be Higher and Stronger-Metal Oxide Electron Transport Materials for Perovskite Solar Cells

Yu Zhou et al.

SMALL (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Enhancing the Open-Circuit Voltage of Perovskite Solar Cells by Embedding Molecular Dipoles within Their Hole-Blocking Layer

Julian F. Butscher et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Li doping on conductivity and band gap of nickel oxide thin film deposited by spin coating technique

J. Arunodaya et al.

MATERIALS RESEARCH EXPRESS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Structural and Electrical Investigation of Cobalt-Doped NiOx/Perovskite Interface for Efficient Inverted Solar Cells

Zahra Rezay Marand et al.

NANOMATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Altered Stability and Degradation Pathway of CH3NH3PbI3 in Contact with Metal Oxide

Sampreetha Thampy et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Physical

Overcoming Redox Reactions at Perovskite-Nickel Oxide Interfaces to Boost Voltages in Perovskite Solar Cells

Caleb C. Boyd et al.

JOULE (2020)

Add to Collection

Article Energy & Fuels

Phytate modifies the hole transport layer and assists in blade coating to prepare efficient perovskite solar cells

Chaorong Wu et al.

SOLAR ENERGY (2020)

Add to Collection

Article Chemistry, Physical

Toward All Slot-Die Fabricated High Efficiency Large Area Perovskite Solar Cell Using Rapid Near Infrared Heating in Ambient Air

Shih-Han Huang et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Comparison of NiOx thin film deposited by spin-coating or thermal evaporation for application as a hole transport layer of perovskite solar cells

Su-Kyung Kim et al.

RSC ADVANCES (2020)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Incorporation of V2O5 nanorods into perovskite photodetectors as an alternative approach to enhance device performance: a step towards stability against ambient water species

Nripen Besra et al.

DALTON TRANSACTIONS (2020)

Add to Collection

Review Chemistry, Physical

A Review on Reducing Grain Boundaries and Morphological Improvement of Perovskite Solar Cells from Methodology and Material-Based Perspectives

Hyuntae Choi et al.

SMALL METHODS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Progress, highlights and perspectives on NiO in perovskite photovoltaics

Diego Di Girolamo et al.

CHEMICAL SCIENCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Solvothermal synthesis of highly crystalline SnO2 nanoparticles for flexible perovskite solar cells application

Haixia Xie et al.

MATERIALS LETTERS (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Encapsulation of Organic and Perovskite Solar Cells: A Review

Ashraf Uddin et al.

COATINGS (2019)

Add to Collection

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Metal Oxide Charge Transport Layers for Efficient and Stable Perovskite Solar Cells

Seong Sik Shin et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

17.78% efficient low-temperature carbon-based planar perovskite solar cells using Zn-doped SnO2 electron transport layer

Haibo Ye et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Multidisciplinary Sciences

Planar perovskite solar cells with long-term stability using ionic liquid additives

Sai Bai et al.

NATURE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

A Novel Approach for the Development of Moisture Encapsulation Poly(vinyl alcohol-co-ethylene) for Perovskite Solar Cells

Ji Hun Jang et al.

ACS OMEGA (2019)

Add to Collection

Article Chemistry, Physical

Tailored electronic properties of Zr-doped SnO2 nanoparticles for efficient planar perovskite solar cells with marginal hysteresis

Young Wook Noh et al.

NANO ENERGY (2019)

Add to Collection

Article Chemistry, Physical

Improving the conductivity of sol-gel derived NiOx with a mixed oxide composite to realize over 80% fill factor in inverted planar perovskite solar cells

Menglin Li et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Fullerene-Based Materials for Photovoltaic Applications: Toward Efficient, Hysteresis-Free, and Stable Perovskite Solar Cells

Lin-Long Deng et al.

ADVANCED ELECTRONIC MATERIALS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Performance Enhancement of Inverted Perovskite Solar Cells Based on Smooth and Compact PC61BM:SnO2 Electron Transport Layers

Yao Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Review on the Application of SnO2 in Perovskite Solar Cells

Liangbin Xiong et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Effective Carrier-Concentration Tuning of SnO2 Quantum Dot Electron-Selective Layers for High-Performance Planar Perovskite Solar Cells

Guang Yang et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Electrochemistry

Fully metal oxide charge selective layers for n-i-p perovskite solar cells employing nickel oxide nanoparticles

Kerem Cagatay Icli et al.

ELECTROCHIMICA ACTA (2018)

Add to Collection

Article Chemistry, Physical

Understanding the Doping Effect on NiO: Toward High-Performance Inverted Perovskite Solar Cells

Wei Chen et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Highly crystalline Nb-doped TiO2 nanospindles as superior electron transporting materials for high-performance planar structured perovskite solar cells

Yinhua Lv et al.

RSC ADVANCES (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Electronic and transport properties of Li-doped NiO epitaxial thin films

J. Y. Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

Add to Collection

Review Nanoscience & Nanotechnology

Scalable fabrication of perovskite solar cells

Zhen Li et al.

NATURE REVIEWS MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Simultaneous Ligand Exchange Fabrication of Flexible Perovskite Solar Cells using Newly Synthesized Uniform Tin Oxide Quantum Dots

So Yeon Park et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2018)

Add to Collection

Article Chemistry, Physical

Roll-to-Roll Printing of Perovskite Solar Cells

Benjia Dou et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Article Multidisciplinary Sciences

Universal passivation strategy to slot-die printed SnO2 for hysteresis-free efficient flexible perovskite solar module

Tongle Bu et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Reducing Hysteresis and Enhancing Performance of Perovskite Solar Cells Using Low-Temperature Processed Y-Doped SnO2 Nanosheets as Electron Selective Layers

Guang Yang et al.

SMALL (2017)

Add to Collection

Article Energy & Fuels

Enhanced electron extraction using SnO2 for high-efficiency planar-structure HC(NH2)2PbI3-based perovskite solar cells

Qi Jiang et al.

NATURE ENERGY (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Current status of electron transport layers in perovskite solar cells: materials and properties

Khalid Mahmood et al.

RSC ADVANCES (2017)

Add to Collection

Article Chemistry, Physical

Highly stable perovskite solar cells in humid and hot environment

Gill Sang Han et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Chemistry, Physical

Efficient and stable perovskite solar cells based on high-quality CH3NH3PbI3-xClx films modified by V2Ox additives

Zhiyong Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Chemistry, Physical

Nickel oxide nanoparticles for efficient hole transport in p-i-n and n-i-p perovskite solar cells

Zonghao Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Planar-Structure Perovskite Solar Cells with Efficiency beyond 21%

Qi Jiang et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Investigation of the Changes in Electronic Properties of Nickel Oxide (NiOx) Due to UV/Ozone Treatment

Raisul Islam et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Self-Functionalization Behind a Solution-Processed NiOx Film Used As Hole Transporting Layer for Efficient Perovskite Solar Cells

John Ciro et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Solution-Processed Nb:SnO2 Electron Transport Layer for Efficient Planar Perovskite Solar Cells

Xiaodong Ren et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Pinhole-Free and Surface-Nanostructured NiOx Film by Room-Temperature Solution Process for High-Performance Flexible Perovskite Solar Cells with Good Stability and Reproducibility

Hong Zhang et al.

ACS NANO (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers

Jingbi You et al.

NATURE NANOTECHNOLOGY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Low Temperature Solution-Processed Sb:SnO2 Nanocrystals for Efficient Planar Perovskite Solar Cells

Yang Bai et al.

CHEMSUSCHEM (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Elimination of the light soaking effect and performance enhancement in perovskite solar cells using a fullerene derivative

Shuyan Shao et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Stable and durable CH3NH3PbI3 perovskite solar cells at ambient conditions

Nagalingam Rajamanickam et al.

NANOTECHNOLOGY (2016)

Add to Collection

Article Chemistry, Physical

One-dimensional (1D) [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) nanorods as an efficient additive for improving the efficiency and stability of perovskite solar cells

Chenxin Ran et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Add to Collection

Article Chemistry, Physical

Achieving high-performance planar perovskite solar cell with Nb-doped TiO2 compact layer by enhanced electron injection and efficient charge extraction

Bai-Xue Chen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Add to Collection

Review Chemistry, Physical

A review of organic small molecule-based hole-transporting materials for meso-structured organic-inorganic perovskite solar cells

Chin Hoong Teh et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Reduced Graphene Oxide/Mesoporous TiO2 Nanocomposite Based Perovskite Solar Cells

Gill Sang Han et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Post-treatment-Free Solution-Processed Non-stoichiometric NiOx Nanoparticles for Efficient Hole-Transport Layers of Organic Optoelectronic Devices

Fei Jiang et al.

ADVANCED MATERIALS (2015)

Add to Collection

Article Chemistry, Physical

Origin of the Thermal Instability in CH3NH3PbI3 Thin Films Deposited on ZnO

Jinli Yang et al.

CHEMISTRY OF MATERIALS (2015)

Add to Collection

Article Chemistry, Physical

Low-temperature SnO2-based electron selective contact for efficient and stable perovskite solar cells

Jiaxing Song et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection

Article Chemistry, Physical

Encapsulation for improving the lifetime of flexible perovskite solar cells

Hasitha C. Weerasinghe et al.

NANO ENERGY (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Synthesis of Unstable Colloidal Inorganic Nanocrystals through the Introduction of a Protecting Ligand

Xiaoyong Liang et al.

NANO LETTERS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Low-temperature processed meso-superstructured to thin-film perovskite solar cells

James M. Ball et al.

ENERGY & ENVIRONMENTAL SCIENCE (2013)

Add to Collection

Article Multidisciplinary Sciences

Efficient planar heterojunction perovskite solar cells by vapour deposition

Mingzhen Liu et al.

NATURE (2013)

Add to Collection

Article Multidisciplinary Sciences

Overcoming ultraviolet light instability of sensitized TiO2 with meso-superstructured organometal tri-halide perovskite solar cells

Tomas Leijtens et al.

NATURE COMMUNICATIONS (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Solvothermal synthesis of crystalline nickel oxide nanoparticles

Elvin R. Beach et al.

MATERIALS CHEMISTRY AND PHYSICS (2009)

Add to Collection

Article Nanoscience & Nanotechnology

NiO Nanoparticles Synthesis by Chemical Precipitation and Effect of Applied Surfactant on Distribution of Particle Size

Y. Bahari Molla Mahaleh et al.

JOURNAL OF NANOMATERIALS (2008)

Add to Collection

Article Chemistry, Physical

Synthesis and characterization of nanocrystalline SnO2 and fabrication of lithium cell using nano-SnO2

AC Bose et al.

JOURNAL OF POWER SOURCES (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.