Related references
Note: Only part of the references are listed.
Article
Chemistry, Multidisciplinary
Yanqiu Lyu et al.
Summary: A class of N-containing heterocyclic compounds acts as organic pH buffers in aqueous Zn-Iodine (I-2) batteries to mitigate issues such as Zn dendrites, hydrogen evolution reaction (HER), corrosion, and polyiodines shuttle. These compounds regulate electrolyte pH, inhibit HER and anode corrosion, and preferentially absorb on Zn metal, achieving non-dendritic Zn plating/stripping. The batteries with these buffers exhibit high Coulombic efficiency, long-term cycling stability, and improved conversion kinetics.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2023)
Article
Nanoscience & Nanotechnology
Bo Keun Park et al.
Summary: By introducing a dielectric silicon oxide with bi-morphological form onto a conventional polyethylene separator, the growth of lithium dendrites can be suppressed, leading to improved performance of lithium-ion batteries.
ACS APPLIED MATERIALS & INTERFACES
(2023)
Article
Nanoscience & Nanotechnology
Shiyun Zhang et al.
Summary: Due to the urgent demand for high-energy-density lithium-ion batteries (LIBs), silicon (Si) with an ultrahigh capacity has gained wide attention. However, the practical application of Si is hindered by the large volume changes during cycling. In this study, a three-dimensional network binder composed of polyacrylic acid (PAA) and lysine (Lys) was constructed. The PAA/Lys binder exhibited strong adhesion to Si particles through hydrogen bonds and the cross-linked structure prevented irreversible slipping of PAA chains. The Si electrode using the PAA/Lys binder showed good cycling stability and high capacity retention, demonstrating the potential of using sustainable Si sources and environmentally friendly binders.
ACS APPLIED MATERIALS & INTERFACES
(2023)
Article
Nanoscience & Nanotechnology
Tianci Cao et al.
Summary: In this study, a three-dimensional Li+ conductive skeleton is constructed on the surface of Ni foam by coating Li3PO4 (LPO) through atomic layer deposition (ALD). The Li metal anode with the activated skeleton shows excellent battery cycling stability and enhanced rate performances. By constructing a mixed conductive network, the Li electrode breaks through the limit of the local surface reaction and provides a new insight into achieving dendrite-free Li metal anodes through holistic charging/discharging.
ACS APPLIED MATERIALS & INTERFACES
(2023)
Article
Chemistry, Multidisciplinary
Hui Zhang et al.
Summary: This study reports a graphene-nanochainmail-protected iron nanoparticle (Fe@Gnc) electrocatalyst, which exhibits superior nitrate removal efficiency and high nitrogen selectivity, along with exceptional stability and durability. The conductive graphene nanochainmail effectively protects the internal iron active sites, allowing Fe@Gnc to maintain its long-lasting electrochemical nitrate catalytic activity.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2023)
Article
Chemistry, Multidisciplinary
Sailin Liu et al.
Summary: To stabilize the zinc anode in zinc metal batteries, researchers have developed a controlled electrolytic method using a high dipole moment solvent dimethyl methylphosphonate (DMMP) to create a monolithic solid electrolyte interphase (SEI). This DMMP-based electrolyte generates a homogeneous and robust phosphate SEI (Zn-3(PO4)(2) and ZnP2O6). With the protection provided by this in situ monolithic SEI, the zinc electrode exhibits long-term cycling performance and high Coulombic efficiency in both zinc|zinc and zinc|copper cells. The use of a DMMP-H2O hybrid electrolyte in a full V2O5|zinc battery also results in high capacity retention following a large number of cycles.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2023)
Article
Electrochemistry
Peifan Wang et al.
Summary: In this study, cellulose-based 3D hierarchical porous carbon (HPC) is used as the sulfur host and 2D lamellar porous carbon (LPC) as the polysulfide-proof interlayer, significantly improving the performance of Li-S batteries for practical applications.
Article
Chemistry, Multidisciplinary
Yeonsong Kim et al.
Summary: A paper-derived Li protection layer obtained by simple heat treatment of a Post-it note can enhance the electrochemical performance of lithium-metal batteries, including low polarization, long lifespan, and excellent rate performance.
Article
Chemistry, Multidisciplinary
Feifei Zhao et al.
Summary: This research focuses on using an insulating g-C3N4 layer to construct a stable artificial solid electrolyte interface (SEI) on the surface of MXene to improve the performance of lithium metal anodes. The 2D/2D MXene/g-C3N4 composite nanosheets protect the Li metal from electrolyte corrosion and achieve higher Coulombic efficiency and cycle lifespan.
Article
Chemistry, Multidisciplinary
Lingli Luo et al.
Summary: This research successfully addresses the challenges faced by Li metal in commercial applications by achieving efficient in situ generation of Li2S-rich interface layer using a nanosized Sb2S3 decorated carbonaceous network. The resulting CC@Sb2S3@Li anode demonstrates uniform Li deposition, high Coulombic efficiency, and alleviated volumetric variation, leading to longer battery lifespan.
Article
Chemistry, Multidisciplinary
Lei Zou et al.
Summary: In this study, novel double-layer solid composite electrolytes were customized for high-voltage lithium metal batteries with improved room-temperature cycling performance. Through a facile two-step coating process, these electrolytes exhibited enhanced mechanical properties, increased ionic conductivity, and good lithium ion migration.
Article
Chemistry, Physical
Sheng Chen et al.
Summary: The study proposed a free-standing porous copper framework decorated with Sn nanoparticles (PCF@Sn) for uniform Li deposition, showing improved stability and cycling performance in lithium metal batteries.
ACS APPLIED ENERGY MATERIALS
(2022)
Review
Chemistry, Multidisciplinary
Fei He et al.
Summary: This review summarizes the specific features of vertically heterostructured solid-state electrolytes (HSE) based on the current knowledge of solid-state electrolyte failure modes. The recent progress in HSE design using organic polymer electrolytes and inorganic electrolytes is comprehensively reviewed. The advantages and drawbacks of the design strategies are discussed, and new perspectives about HSE are proposed.
ADVANCED FUNCTIONAL MATERIALS
(2022)
Article
Materials Science, Multidisciplinary
Ji-Ming Peng et al.
Summary: By creating a cross-linked conducting carbon network in LiFePO4/C cathode material, the modulation of electrode/electrolyte interface can yield excellent rate performance, enhance electron transmission rate and efficiency for Li storage, while inhibiting agglomeration and growth of LiFePO4/C primary particles, leading to a shortened Li+ diffusion pathway.
Article
Chemistry, Physical
Pengcheng Ma et al.
Summary: Li-ZnO-CoO/CC, a carbon cloth modified with ZnO-CoO particles, is synthesized as a host for Li metal anodes. It exhibits better lithiophilic properties and a lower nucleation overpotential, leading to stable Li plating/stripping. In addition, when paired with NCM523, it shows good capacity retention.
ACS APPLIED ENERGY MATERIALS
(2022)
Article
Nanoscience & Nanotechnology
Min A. Lee et al.
Summary: Introducing a lithium-chelating azamacrocyclic ligand into a carbonate-based electrolyte improves the reversible cycleability of lithium metal negative electrodes. The ligand facilitates reversible lithium plating and stripping on copper electrodes through its dual functionality, acting as a cationic shielding molecule for smooth lithium deposition and strengthening the interphasial characteristics of the lithium metal negative electrode with a Li3N-based solid electrolyte interphase film.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Article
Chemistry, Physical
Zilong Zhuang et al.
Summary: A carbon cloth-assisted two-step self-template method was used to synthesize hollow zeolitic imidazolate framework-8, which transformed into a brittle starlike ZnO-N co-doped nano carbon web after annealing and showed promise as a stable lithium metal anode. The lithiophilic spots of ZnO and N species enabled a stable Li plating/stripping process with high current density and capacity, while the brittle star-like h-ZNCC-Li anode exhibited low-voltage hysteresis.
MATERIALS TODAY ENERGY
(2022)
Review
Electrochemistry
Wenzhuo Cao et al.
Summary: This paper examines the behaviors, mechanisms, and influencing factors of Li plating/stripping and proposes general strategies to control Li deposition. It is essential to have comprehensive design strategies for the electrode, electrolyte, and their interface. Three dimensional (3D) anodes and artificial interface engineering can reduce the risk of Li deposition, while electrolyte engineering favors Li transport and suppresses dendrites, serving as the final barrier to uncontrolled Li deposition.
Article
Chemistry, Multidisciplinary
Xiangru Sun et al.
Summary: In this study, a high-dielectric artificial solid-electrolyte interface (SEI) was designed to regulate the electric field distribution and Li+ flux and stabilize the interface in lithium metal anodes (LMAs). The artificial SEI demonstrated remarkable cycling performance in both symmetric cell configuration and LiCoO2||Li full cells. This work provides a new physical perspective for the stable LMAs by using the novel configuration of the artificial SEI.
Article
Nanoscience & Nanotechnology
Jinhai You et al.
Summary: In this study, a composite protective layer containing titanium butyrate metal alkoxide was used to modify lithium metal anodes, resulting in dendrite-free LMAs and significantly enhanced cycling stability.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Article
Multidisciplinary Sciences
Guanjia Zhu et al.
Summary: A novel boron doping-induced interconnection-assembly approach was reported for fabricating mesoporous silicon oxycarbide nanospheres, featuring interconnected and strongly coupled nanospheres with coarse surfaces. The architecture offers tunable interconnection size, surface roughness, and switchable primary nanoparticles, demonstrating dual stable characteristics for long-term cycle life in lithium-ion battery anode applications.
NATIONAL SCIENCE REVIEW
(2021)
Article
Chemistry, Multidisciplinary
Yusheng Ye et al.
Summary: This study introduces a new antipulverization and high-continuity lithium metal anode, utilizing a combination of solid-state electrolyte nanoparticles and copper foil to mitigate lithium dendrite growth, improve cycling efficiency, and maintain electrode structural integrity.
ADVANCED MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Sailin Liu et al.
Summary: This study presents a nonflammable, moderate-concentration electrolyte highly compatible with graphite anodes that exhibits exceptional cycling stability. The stability of the electrolyte is attributed to the nearly 100% solvation of TMP molecules with K+ cations and the formation of a F-rich solid electrolyte interphase. The findings highlight the importance of electrolyte-interface compatibility and offer new opportunities for designing safe and practical PIBs.
ADVANCED MATERIALS
(2021)
Article
Chemistry, Physical
Zilong Zhuang et al.
Summary: This study successfully prepared ultrathin graphitic carbon nitride nanosheets for use on lithium metal anodes, forming an artificial solid electrolyte interface (SEI) to suppress lithium dendrite growth and enhance the affinity of electrodes with electrolytes.
Review
Chemistry, Physical
Haiping Wu et al.
Summary: The structure, properties, and influencing factors of SEI play a crucial role in the performance of lithium metal batteries. Efficient strategies for tailoring SEI involve understanding the composition, models, and properties of SEI, as well as the correlations between electrolyte components and SEI. Future directions include in-operando techniques, multi-modality approaches for SEI characterization, and artificial intelligence assisted understanding of SEI properties.
ADVANCED ENERGY MATERIALS
(2021)
Article
Chemistry, Physical
Chuanliang Wei et al.
Summary: Passivating the surface of lithium metal anodes with a liquid metal improves their stability by forming a lithium-based alloy framework. This framework alleviates corrosion, uneven lithium deposition, and unstable interfaces, leading to superior electrochemical performance when paired with high-voltage cathodes. This passivation strategy also holds potential for highly reactive sodium and potassium metal anodes.
ENERGY STORAGE MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Jingyi Wu et al.
Summary: Controllable dendrite growth in lithium metal batteries has been a major obstacle to their commercialization. A polycationic and hydrophobic polymer protective layer has been developed to address this issue, allowing for stable and efficient Li metal anodes. This protective layer enables steady Li plating/stripping, improved Li utilization efficiency, and enhanced electrochemical performance in cells utilizing LiNi0.8Mn0.1Co0.1O2 and LiFePO4. The layer also contributes to the formation of a stable solid electrolyte interphase (SEI), as demonstrated through mechanism investigation.
ADVANCED MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Bin Feng et al.
Summary: The development of a liquid metal-based flexible sensor with nacre-inspired architecture has significantly improved sensitivity and widened the working range, breaking through the long-standing bottleneck in liquid metal-based electronic skin. Spatially regulated cracking behaviors effectively prevent crack propagation, showcasing potential for ultrasensitive liquid metal-based electronic skins.
ADVANCED FUNCTIONAL MATERIALS
(2021)
Article
Materials Science, Multidisciplinary
Duan Wang et al.
Summary: A NiCoS2/rGO electrocatalyst with well-dispersed nanoparticles, dual-sided graphene support, and a large specific surface area was successfully prepared. It showed superior catalytic performance in the oxygen evolution reaction, outperforming NiS2/rGO and CoS2/rGO counterparts. The enhanced electrocatalytic performances were supported by experimental results on active sites and conductivity.
Article
Engineering, Environmental
Yongliang Zou et al.
Summary: The study presents an all-hydrogel supercapacitor with high electric conductivity, large specific capacitance, great toughness and self-healing ability. It can maintain stable energy output even after being subjected to various deformations and can self-heal within 4 hours. The supercapacitor is a promising smart storage device for wearable applications.
CHEMICAL ENGINEERING JOURNAL
(2021)
Article
Chemistry, Multidisciplinary
Pengbo Zhai et al.
Summary: Utilizing liquid gallium-indium (GaIn) nanoparticles with structural self-healing properties to guide uniform metallic lithium nucleation and deposition effectively addresses the issue of Li dendrite growth during charge/discharge processes. The self-healing design of nucleation seeds provides important insights for achieving high-performance lithium metal anodes.
Article
Chemistry, Multidisciplinary
Di Yang et al.
Summary: An artificial organic/inorganic composite protecting film with a surface pits structure was prepared for lithium metal anode, showing stable operation for 1000 hours at a high current density and improved cycling performance when paired with LiFePO4 or sulfur cathode, demonstrating great potential in lithium metal batteries.
Article
Chemistry, Multidisciplinary
Guoxing Li et al.
Summary: The controllable design of an ordered LiF-rich and lithiophilic hybrid Janus interphase (LiF-HJI) using organic fluorination reagent as a functional SEI precursor has been reported in this study, which enables stable Li metal anodes under harsh conditions and greatly improves cycling stability and capacity retention.
Article
Chemistry, Multidisciplinary
Hua Wang et al.
Summary: The Li anode with silver nanowires sowed in patterned ditches shows improved stability and cycling performance, with excellent cyclability achieved under specific current and capacity conditions. Pairing this anode with specific cathodes also demonstrates long cycle life and minimal gas generation in full cells over extended cycling, showcasing the effectiveness of the authors' strategy for LMBs.
Article
Chemistry, Physical
Zibo Zhang et al.
Summary: A special carbon-coated stainless steel mesh is utilized to encapsulate lithium metal, aiming to achieve dendrite-free lithium deposition and improve Coulombic efficiency.
ACS APPLIED ENERGY MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Wenjie Wang et al.
Summary: The research shows that using liquid metal to touch and eliminate dendrites can suppress the cycling instability and safety hazards of lithium metal batteries, achieving stable cyclic performance. By forming a defense layer on the electrode, liquid gallium reacts continuously and reversibly with lithium metal, successfully removing dendrites and preventing instability issues in lithium batteries.
Article
Chemistry, Physical
Zhixing Zhang et al.
Summary: A new class of sponge-like porous hydrogel conductors integrating self-healing ability, multiple sensations, and excellent mechanical properties is proposed in this study, resulting from liquid metal-created multiple structures.
JOURNAL OF MATERIALS CHEMISTRY A
(2021)
Article
Chemistry, Multidisciplinary
Yuxin Zheng et al.
Summary: This work demonstrates the rational coating of a flexible and conformal CTF-LiI coating on the Li metal surface to stabilize metallic Li, which leads to a uniform, dense, and dendrite-free electrodeposition process and effectively suppresses side reactions between metallic Li and electrolyte. This advancement shows a significant progress towards large-scalable and long-cycling stable Li metal batteries.
ADVANCED FUNCTIONAL MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Gang Wang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2020)
Article
Chemistry, Multidisciplinary
Kecheng Pan et al.
ADVANCED MATERIALS
(2020)
Article
Chemistry, Physical
Hao Chen et al.
ADVANCED ENERGY MATERIALS
(2020)
Article
Chemistry, Multidisciplinary
Jing Xiao et al.
Article
Nanoscience & Nanotechnology
Suogang Guo et al.
Article
Chemistry, Multidisciplinary
Bing Han et al.
ADVANCED MATERIALS
(2020)
Article
Engineering, Environmental
Zixuan Zhou et al.
CHEMICAL ENGINEERING JOURNAL
(2020)
Article
Multidisciplinary Sciences
Junwei Meng et al.
NATURE COMMUNICATIONS
(2020)
Article
Chemistry, Physical
Yipeng Sun et al.
ADVANCED ENERGY MATERIALS
(2020)
Article
Nanoscience & Nanotechnology
Baoluo He et al.
ACS APPLIED NANO MATERIALS
(2020)
Article
Engineering, Environmental
Yang Lou et al.
CHEMICAL ENGINEERING JOURNAL
(2020)
Article
Chemistry, Multidisciplinary
Zhipeng Jiang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2019)
Article
Chemistry, Multidisciplinary
Chuanliang Wei et al.
Article
Chemistry, Physical
Shang-Sen Chi et al.
ENERGY STORAGE MATERIALS
(2019)
Article
Chemistry, Multidisciplinary
Pengju Zhang et al.
MATERIALS HORIZONS
(2019)
Article
Chemistry, Multidisciplinary
Hui Duan et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
(2018)
Article
Chemistry, Multidisciplinary
Rui Xu et al.
ADVANCED FUNCTIONAL MATERIALS
(2018)
Article
Materials Science, Multidisciplinary
Fali Li et al.
ADVANCED MATERIALS TECHNOLOGIES
(2018)
Article
Chemistry, Multidisciplinary
Xuelin Guo et al.
ADVANCED FUNCTIONAL MATERIALS
(2018)
Review
Electrochemistry
Qing Zhang et al.
ELECTROCHEMICAL ENERGY REVIEWS
(2018)