☆ 4.7 Article

Trace doping realizing superior electrochemical performance in P2-type Na 0.50 Li 0.08 Mn 0.60 Co 0.16 Ni 0.16 O 2 cathode for sodium-ion batteries

CHINESE CHEMICAL LETTERS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

High-performance Na3V2(PO4)2F3 cathode obtained by a three-in-one strategy for self-sodium compensation, interface modification, and crosslinked carbon coatings

Kang Liang et al.

Summary: A crosslinked carbon-covered porous NVPF composite was prepared using a modified sol-gel method, which improved the electrochemical properties of sodium-ion batteries (SIBs) by achieving self-sodium compensation, interface modification, and crosslinked carbon coating. The optimized material exhibited outstanding discharge capacity, rate capability, and high-temperature adaptability.

APPLIED SURFACE SCIENCE (2023)

Add to Collection

Article Energy & Fuels

Adenosine triphosphate induced transition-metal phosphide nanostructures encapsulated with N, P-codoped carbon toward electrochemical water splitting

Peng Wei et al.

Summary: Transition metal phosphides (TMPs) have gained attention as potential non-precious metal catalysts due to their abundance, low cost, and high catalytic activity. By using adenosine triphosphate (ATP) as a green phosphorus source, we successfully synthesized N, P doped carbon-sealed TMPs nanostructures (TMPs@NPC) via a facile solid-phase method. The resulting TMPs@NPC showed excellent bifunctional catalytic performance, with Co2P@NPC demonstrating superior activity and durability in HER and OER reactions. Additionally, Co2P@NPC also exhibited robust overall water electrolysis performance, highlighting the potential of TMPs@NPC in electrochemical applications.

FUEL (2023)

Add to Collection

Review Electrochemistry

Recent Progress in Surface Coatings for Sodium-Ion Battery Electrode Materials

Tyler Or et al.

Summary: Sodium-ion batteries are a promising alternative to lithium-ion batteries, but their cycling stability and rate performance need improvement. Coatings offer a way to enhance electrode materials by reducing side reactions, limiting dissolution, and providing reinforcement. This review provides an overview and comparison of coatings applied to sodium-ion battery electrodes.

ELECTROCHEMICAL ENERGY REVIEWS (2022)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Iron substituted layered P2-type Na1/2Ti6/10Ni3/10Fe1/10O2 as innovative anode material for rechargeable sodium batteries

K. Kannan et al.

Summary: The synthesis of P2-type Sodium titanium nickel iron oxide material by substituting iron (Fe) improves structural stability and enhances reversibility of sodium ion cycling process. This material shows promising battery performance for room temperature applications.

INORGANIC CHEMISTRY COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Physical

Current state-of-the-art characterization techniques for probing the layered oxide cathode materials of sodium-ion batteries

Qiuyu Shen et al.

Summary: This article summarizes the latest advances in the study of layered transition metal oxides as cathodes for sodium-ion batteries, focusing on the application of advanced analytical techniques to reveal structural evolution and electrochemical responses. Understanding the material's structure, composition changes, etc., can provide guidance for the design of new electrode materials.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

A highly-stable layered Fe/Mn-based cathode with ultralow strain for advanced sodium-ion batteries

Rui Qi et al.

Summary: This study demonstrates an efficient strategy of improving the structural durability of iron- and manganese-based cathodes through dual heteroatom doping, resulting in cathode materials with excellent cyclability and rate capability for grid-scale energy storage systems.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Tuning oxygen redox chemistry of P2-type manganese-based oxide cathode via dual Cu and Co substitution for sodium-ion batteries

Quanqing Zhao et al.

Summary: The P2-Na-2/3(Mn-Ni-Cu-Co)O-2 cathode, stabilized by dual Cu and Co substitution, exhibits enhanced high voltage region and activated oxygen redox, effectively suppressing oxygen loss and showing high cycling life and remarkable rate capability.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Complementary Effect of Ti and Ni Incorporation in Improving the Electrochemical Performance of a Layered Sodium Manganese Oxide Cathode for Sodium-Ion Batteries

Zheng-Yao Li et al.

Summary: This research successfully enhanced the performance of sodium-ion batteries by replacing some Mn ions in the sodium manganese oxide cathode with Ti4+ and Ni2+, resulting in improved performance such as suppressed phase transitions and ordering process, alleviated Jahn-Teller distortion, increased Na utilization, and sustained high cycling stability.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Copper and Zirconium Codoped O3-Type Sodium Iron and Manganese Oxide as the Cobalt/Nickel-Free High-Capacity and Air-Stable Cathode for Sodium-Ion Batteries

Ya-Min Zheng et al.

Summary: The research utilized codoping of Cu and Zr to optimize the O3-type Na-Fe-Mn oxide cathode, improving its electrochemical performance and air stability, demonstrating potential applications in sodium-ion batteries.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Ultralow Volume Change of P2-Type Layered Oxide Cathode for Na-Ion Batteries with Controlled Phase Transition by Regulating Distribution of Na+

Zhengbo Liu et al.

Summary: Controlled distribution of Na ions can effectively regulate the phase transition process of P2-type layered oxides, reducing volume change to as low as 1.9% and improving cycling stability.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Physical

Structural Origins of Voltage Hysteresis in the Na-Ion Cathode P2Na0.67[Mg0.28Mn0.72]O2: A Combined Spectroscopic and Density Functional Theory Study

Euan N. Bassey et al.

Summary: This study reports the structural changes in P2-Na-0.67[Mg0.28Mn0.72]O-2, including the formation of a high-voltage Z phase and intergrowth of OP4 and O2 phases. The research shows that reversible Mg2+ migration in the Z phase is favorable at high voltages and is a significant contributor to observed voltage hysteresis.

CHEMISTRY OF MATERIALS (2021)

Add to Collection

Article Electrochemistry

A collaborative strategy with ionic conductive Na2SiO3 coating and Si doping of P2-Na0.67Fe0.5Mn0.5O2 cathode: An effective solution to capacity attenuation

Jianyue Jiao et al.

Summary: This study focuses on a strategy of modifying layered oxide P2-Na0.67Fe0.5Mn0.5O2 with conducting ionic Na2SiO3 nanolayers and Si doping, resulting in excellent electrochemical performance including reduced polarization, improved cycling stability, and enhanced thermal stability.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Multidisciplinary Sciences

Engineering Na+-layer spacings to stabilize Mn-based layered cathodes for sodium-ion batteries

Wenhua Zuo et al.

Summary: The authors utilized a water-mediated strategy to enhance the electrochemical performance of manganese-based layered cathodes in sodium-ion batteries, achieving outstanding cycling stability and rate capability. Engineering alkali-metal layer spacings was shown to be an effective strategy for stabilizing the structure of layered transition metal oxides.

NATURE COMMUNICATIONS (2021)

Add to Collection

Review Nanoscience & Nanotechnology

Fundamentals, status and promise of sodium-based batteries

Robert Usiskin et al.

Summary: Sodium batteries have made significant progress in recent years and are considered promising candidates for mitigating supply risks associated with lithium batteries. This review compares the fundamental principles and specific materials of sodium and lithium batteries, and evaluates the performance of recent prototype sodium cells.

NATURE REVIEWS MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

P2-layered Na0.5Li0.07Mn0.61Co0.16Ni0.16O2 cathode boosted Na-storage properties via rational sub-group element doping

Dongmei Dai et al.

Summary: The addition of sub-group elements doping can improve the structural stability and sodium storage properties of P2-layered metal oxide cathodes, thereby facilitating the kinetics of Na+ migration.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Chemistry, Physical

Mitigating the P2-O2 transition and Na+/vacancy ordering in Na2/3Ni1/3Mn2/3O2 by anion/cation dual-doping for fast and stable Na+ insertion/extraction

Qianjiang Mao et al.

Summary: In this study, a controlled F-/Ca2+ dual-doping strategy was proposed to mitigate the P2-O2 phase transition, significantly improving the structural stability and cycling performance. The doping of Ca2+ and F- facilitated electronic and ionic conductivity, enhancing the high-rate capability.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of Sodium Content on the Electrochemical Performance of Li-Substituted, Manganese-Based, Sodium-Ion Layered Oxide Cathodes

Qun Huang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Cu-Doped P2-Na0.7Mn0.9Cu0.1O2 Sodium-Ion Battery Cathode with Enhanced Electrochemical Performance: Insight from Water Sensitivity and Surface Mn(II) Formation Studies

Jianyin Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Multidisciplinary Sciences

Rational design of layered oxide materials for sodium-ion batteries

Chenglong Zhao et al.

SCIENCE (2020)

Add to Collection

Article Electrochemistry

Structural stability and superior electrochemical performance of Sc-doped LiMn2O4 spinel as cathode for lithium ion batteries

Subramani Bhuvaneswari et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Chemistry, Physical

Nb5+-doped P2-type Mn-based layered oxide cathode with an excellent high-rate cycling stability for sodium-ion batteries

Lijun Wang et al.

IONICS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Excellent cyclability of P2-type Na-Co-Mn-Si-O cathode material for high-rate sodium-ion batteries

Lijun Wang et al.

JOURNAL OF MATERIALS SCIENCE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

P2-Na0.67AlxMn1-xO2: Cost-Effective, Stable and High-Rate Sodium Electrodes by Suppressing Phase Transitions and Enhancing Sodium Cation Mobility

Xiangsi Liu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Dissolution, migration, and deposition of transition metal ions in Li-ion batteries exemplified by Mn-based cathodes - a critical review

Chun Zhan et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

On Disrupting the Na+-Ion/Vacancy Ordering in P2-Type Sodium-Manganese-Nickel Oxide Cathodes for Na+-Ion Batteries

Arturo Gutierrez et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced Rate Capability and Cycle Performance of Titanium-Substituted P2-Type Na0.67Fe0.5Mn0.5O2 as a Cathode for Sodium-Ion Batteries

Joon-Ki Park et al.

ACS OMEGA (2018)

Add to Collection

Article Chemistry, Physical

Beneficial effect of boron in layered sodium-ion cathode materials - The example of Na2/3B0.11Mn0.89O2

Christoph Vaalma et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection

Article Chemistry, Physical

Cu-doped P2-Na0.5Ni0.33Mn0.67O2 encapsulated with MgO as a novel high voltage cathode with enhanced Na-storage properties

Hari Vignesh Ramasamy et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Chemistry, Physical

Jahn-Teller Assisted Na Diffusion for High Performance Na Ion Batteries

Xin Li et al.

CHEMISTRY OF MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

β-NaMnO2: A High-Performance Cathode for Sodium-Ion Batteries

Juliette Billaud et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

Add to Collection

Article Chemistry, Physical

P2-NaxVO2 system as electrodes for batteries and electron-correlated materials

Marie Guignard et al.

NATURE MATERIALS (2013)

Add to Collection

Article Chemistry, Inorganic & Nuclear

The P2-Na2/3Co2/3Mn1/3O2 phase: structure, physical properties and electrochemical behavior as positive electrode in sodium battery

D. Carlier et al.

DALTON TRANSACTIONS (2011)

Add to Collection

© Peeref 2019-2024. All rights reserved.