Related references
Note: Only part of the references are listed.
Article
Chemistry, Physical
Jing Wang et al.
Summary: Layered bismuth oxychalcogenides have shown promising potential as photoelectric materials. This study prepared a Bi9O7.5S6/CdS composite film and investigated its optical, impedance, and photoelectrochemical properties, demonstrating the potential application of Bi9O7.5S6 for water splitting.
JOURNAL OF ALLOYS AND COMPOUNDS
(2023)
Article
Engineering, Environmental
Hao Zhang et al.
Summary: In this study, four novel iron-based metal-organic frameworks (Fe-MOFs) were synthesized via ligand modulation to enhance the photocatalytic Cr(VI) reduction. The highest catalytic activity was achieved with the MTBDC-TPT-Fe structure, which showed enhanced electron push-pull effect and improved charge carrier separation and transfer. The introduction of -SCH3 groups enhanced light absorption and electron donation, while the introduction of TPT improved active sites exposure and Cr(VI) adsorption.
JOURNAL OF HAZARDOUS MATERIALS
(2023)
Article
Materials Science, Multidisciplinary
Ruiqi Gao et al.
Summary: This study designs a 2D/2D organic/inorganic direct Z-scheme COF-based heterojunction (TpTAP/CdS) to improve the efficiency of photoelectron migration, and verifies the mechanism of charge transfer.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
(2023)
Article
Engineering, Chemical
Huixing Yang et al.
Summary: The proper design of photocatalysts is crucial for improving the performance of photocatalytic decomposition of water and degradation of pollutants. In this study, a composite material CdS-DETA@g-C3N5 was synthesized by combining nitrogen-rich carbon nitride with CdS-DETA, which exhibited significantly higher hydrogen evolution rate and OFLX degradation rate compared to other catalysts. The enhancements in performance were attributed to the enhancement of energy band bending, construction of a built-in electric field, and retention of high redox carriers.
SEPARATION AND PURIFICATION TECHNOLOGY
(2023)
Article
Chemistry, Physical
Chunyu Yuan et al.
Summary: Properly engineered heterojunction photocatalysts can effectively separate photoexcited electron-hole pairs and improve the photocatalytic hydrogen evolution performance. In this study, 3D bicontinuous nanoporous reduced graphene oxide (np-rGO) was used as a supporting matrix for CdS nanoparticles to achieve a highly efficient photocatalysis system for hydrogen production. The bicontinuous internal ligament and open nanopores in the 3D nanoporous heterojunction contribute to improved light absorption and utilization capacity. The construction of a p-n heterojunction with staggered band alignment in CdS/np-rGO accelerates the transport of photo-excited carriers, leading to a significant increase in hydrogen generation rate.
Article
Engineering, Environmental
Lingli Zhu et al.
Summary: In this study, Bi7O9I3/g-C3N4 composites modified by lignin-derived carbon quantum dots (CQDs) were used for the synchronous photocatalytic removal of Cr(VI) and levofloxacin (LEV). The 0.5-CQD/BOI/CN photocatalyst showed enhanced light-harvesting capacity, charge separation efficiency, and electron transfer rate. Under 60 minutes of light irradiation, the photoreduction efficiency of Cr(VI) reached 100% and the degradation efficiency of LEV was 94.8%. The intermediates of LEV and the possible degradation pathway were determined and speculated using LC-MS analysis and density functional theory calculation, respectively.
JOURNAL OF HAZARDOUS MATERIALS
(2023)
Review
Materials Science, Multidisciplinary
Chao Liu et al.
Summary: This review presents the recent advances in ZnIn2S4-based heterostructured photocatalysts for photocatalytic hydrogen evolution (PHE), including different heterojunction types, reaction systems, and identification methods. It is of great significance for designing efficient photocatalysts.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
(2023)
Article
Engineering, Chemical
Hongfei Yin et al.
Summary: In this study, 0D/2D/1D AgI/BiOI/C3N5 dual Z-scheme heterojunctions with confined interface structures were successfully fabricated by combining a room-temperature precipitation strategy with an ion-exchange route. The photocatalytic activity of the as-prepared dual Z-scheme heterojunctions was evaluated by conducting the photodegradation of tetracycline hydrochloride (TCH) under simulated visible light illumination. The constructed dual Z-scheme heterojunctions exhibited superior catalytic activity compared to the single component and counterpart single Z-scheme heterojunctions.
SEPARATION AND PURIFICATION TECHNOLOGY
(2023)
Article
Chemistry, Physical
Jing Li et al.
Summary: Piezo-potential promoted photocatalysis shows promise in efficient dye decomposition, but it is limited by low quantum yield and piezoelectric activity of catalysts. In this study, a heterogeneous CdS-Au composite photocatalyst was synthesized and showed enhanced photocatalytic activity for organic pollutants degradation. The synergistic effect of piezo-phototronic and localized surface plasmon resonance facilitated efficient carrier separation and internal quantum efficiency. The loading of Au nanoparticles modulated CdS nanosphere properties and improved photocatalytic activity for Methyl Orange degradation.
Article
Chemistry, Multidisciplinary
Duoduo Gao et al.
Summary: The electron density regulation of active sites can optimize the hydrogen-binding strength. A new concept of antibonding-orbital occupancy state is proposed to explain the influence mechanism of electron density on the Se-H-ads bond strength. By constructing a Se-rich environment, ReSe2+x nanodots achieve first-rank adsorption energy towards atomic hydrogen. The Se-enriched environment induces the formation of electron-deficient Se(2-delta)- and increases the stability of the Se-H-ads bonds.
ADVANCED FUNCTIONAL MATERIALS
(2023)
Article
Materials Science, Ceramics
Min Zhang et al.
Summary: The CeO2/Zn0.4Cd0.6S heterojunction with a unique 0D/1D morphology was successfully synthesized using a soft chemistry method, which was confirmed by XPS and TEM. Photoreduction of hexavalent chromium ions (CrVI) and photodegradation of tetracycline hydrochloride (TC) were used to evaluate the photocatalytic activities. The results showed that the introduction of CeO2 significantly enhances the photocatalytic performance of Zn0.4Cd0.6S, and the loading of 10 wt% CeO2 exhibits the best photocatalytic activity and structural stability. The S-scheme electron transport mechanism was investigated through active species trapping experiments, providing an effective idea for the design of highly stable metal sulfide photocatalysts.
CERAMICS INTERNATIONAL
(2023)
Article
Engineering, Environmental
Zhuonan Lei et al.
Summary: In this study, a ternary In2.77S4/NiS2/g-C3N4 S-scheme heterojunction was constructed by synthesizing In2.77S4/NiS2 heterojunction and introducing it to the surface of g-C3N4. The ternary heterojunction exhibited excellent light harvesting ability and improved charge carrier separation and migration compared to its components. Photocatalytic tests showed significantly higher H2 production rate for In2.77S4/NiS2/g-C3N4 compared to g-C3N4, In2.77S4, and In2.77S4/g-C3N4. Further investigation revealed the charge transfer mechanism and enhanced surface reactions due to NiS2 and more electro-chemical active sites provided by In2.77S4/NiS2. This work provides an effective method for designing novel g-C3N4-based S-scheme heterojunctions.
CHEMICAL ENGINEERING JOURNAL
(2023)
Article
Engineering, Environmental
Jinxing Yu et al.
Summary: Semiconductor-based photocatalytic techniques offer a durable and environmentally friendly approach to disinfect microbes. By growing narrow bandgap MgIn2S4 onto In2O3, MgIn2S4@In2O3 hierarchical tubular heterostructures were fabricated. These structures enable efficient photocarrier separation, resulting in continuous production of reactive species and high antimicrobial activity.
CHEMICAL ENGINEERING JOURNAL
(2023)
Article
Engineering, Environmental
Weijia An et al.
Summary: Fe-doped three-dimensional flower-like structures BiOBr (Fe-BiOBr) with rich surface oxygen vacancies (OVs) were prepared and showed high degradation activity in the presence of H2O2 and visible light irradiation. The Fe-BiOBr composites not only exhibited good removal efficiency for phenolic compounds and coking wastewater, but also had good structural stability. The oxygen vacancies played a crucial role in promoting the photocatalytic-Fenton synergistic degradation activity by improving carrier separation efficiency and acting as the adsorption and activation site of H2O2 to produce hydroxyl radicals.
CHEMICAL ENGINEERING JOURNAL
(2023)
Article
Chemistry, Physical
Yang Li et al.
Summary: A series of Zn3In2S6@SnS2 photocatalysts with different SnS2 mass ratios were prepared by hydrothermal method. The composite materials were used for photocatalytic hydrogen evolution under visible light excitation. The unique structure accelerates the separation and transfer of photo-generated electrons and holes. The Zn3In2S6@SnS2 three-dimensional heterostructure without any co-catalyst (SnS2 doping amount of 10 %) exhibited remarkable activity, and its hydrogen production rate was 15443 mu mol h- 1g- 1, indicating high photocatalytic stability for water decomposition. Based on photoelectrochemical (PEC) and hydrogen evolution tests, a reasonable photocatalytic mechanism was proposed.
CHEMICAL PHYSICS LETTERS
(2023)
Article
Chemistry, Multidisciplinary
Duoduo Gao et al.
Summary: In this study, an electron-reversal strategy was proposed for the first time to steer the free-electron transfer in a favorable direction and weaken the S-H-ads bonds. The core-shell Au@MoS2+x cocatalyst was constructed to optimize the antibonding-orbital occupancy and generate electron-rich S(2+delta)- active sites. The increase in antibonding-orbital occupancy effectively destabilizes the H 1s-p antibonding orbital and weakens the S-H-ads bond, leading to rapid generation of visible H-2 bubbles.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2023)
Article
Engineering, Chemical
Min Zhang et al.
Summary: Construction of carbon-based heterostructural photocatalyst materials with high electron transfer rates is an effective strategy for organic pollutant mineralization and toxic metal ion removal under visible-light irradiation. This study developed a facile hydrothermal route to prepare a series of heterojunction photocatalysts, which exhibited excellent photocatalytic activity for degradation of tetracycline hydrochloride and reduction of Cr(VI). Notably, the photocatalysts showed good activity and stability even after cycle experiment. This study provides new insights into the design of carbon-based heterojunction photocatalysts for the removal of harmful chemicals.
SEPARATION AND PURIFICATION TECHNOLOGY
(2023)
Article
Engineering, Environmental
Xiwei Xu et al.
Summary: The Z-scheme AgIn5S8/ZnO heterojunction shows superior photocatalytic activity in degrading pharmaceutical pollutants and enhancing biodegradability of pharmaceutical wastewater by efficient charge carrier separation driven by internal electric field, generating high redox holes and electrons for effective elimination of pharmaceutical pollutants.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Chemistry, Multidisciplinary
Depeng Zhao et al.
Summary: Several vacancy-dependent CoZnxMn2-xO4 catalysts were prepared by tailoring the concentration of Zn ions. The superior electrocatalytic performance can be attributed to the formations of active species and oxygen vacancies. These catalysts exhibit comparable performance to noble metal catalysts IrO2 and Pt/C.
Article
Chemistry, Physical
Xue Li et al.
Summary: This study presents an exquisitely designed LaVO4/CN heterostructure for efficient photocatalytic hydrogen production and high-value chemical synthesis. By substituting traditional sacrificial agents with biomass furfuryl alcohol, the LaVO4/CN heterojunction achieves significantly increased hydrogen evolution and furfural production rates, providing a new strategy for sustainable energy conversion and value-added chemical production.
Article
Chemistry, Multidisciplinary
Tongming Su et al.
Summary: An ultrathin 2D/2D Ti3C2Tx/ZnIn2S4 heterostructure was designed with larger contact area and strong electronic interaction to promote charge carrier transfer, leading to enhanced photocatalytic hydrogen evolution. The synergistic effect of sulfur vacancy and Ti3C2Tx cocatalyst greatly improves electron transfer and separation of photogenerated charge carriers, increasing the efficiency of photocatalytic hydrogen evolution.
Article
Green & Sustainable Science & Technology
Mahmoud Sayed et al.
Summary: The study fabricated a robust S-scheme heterojunction that enhances the efficiency of CO2 photocatalytic conversion. This heterojunction is composed of 3D ZnO hollow spheres wrapped by 2D g-C3N4 layers. The photocatalyst showed a significantly higher CH4 production rate compared to pure ZnO and g-C3N4.
ADVANCED SUSTAINABLE SYSTEMS
(2022)
Article
Chemistry, Physical
Yuchao Yao et al.
Summary: In this study, a novel hierarchical CdS-DETA@CoP composite was successfully fabricated and applied for visible-light-driven photocatalytic water splitting for hydrogen generation. The excellent catalytic performance and stability of the composite are mainly attributed to the synergistic effect between CdS-DETA and CoP, as well as the uniform dispersion of CdS-DETA on the surface of hierarchical CoP co-catalyst.
APPLIED SURFACE SCIENCE
(2022)
Article
Chemistry, Physical
Yuanyuan Shao et al.
Summary: We report a superior carbon-related ZnIn2S4/g-C3N4 catalyst with excellent H2O2 generation and consumption capabilities for efficient sterilization under visible light irradiation. The 2D/2D heterojunction of ZnIn2S4/g-C3N4 exhibits a remarkable H2O2 yield of 4.27 mmol g(-1), which is much higher than that of current catalysts. The in-situ produced H2O2 can be quickly activated to strong oxidizing hydroxyl radicals for sterilization, achieving complete clearance of Escherichia coli (E. coli) within 25 min and 98% killing of Staphylococcus aureus (S. aureus) after 60 min irradiation. The prepared photocatalysts enable rapid production and consumption of H2O2, providing an effective green strategy for sterilization via in-situ generated H2O2.
Article
Engineering, Chemical
Chen-Yang Pei et al.
Summary: This study systematically investigates the nitrogen photofixation over well-designed oxygen vacancies and interface coordinately modulated WO3/InVO4 samples. The results show that interface modulation can significantly enhance catalytic activity for nitrogen photofixation, especially in the optimized 70 wt% WO3/InVO4 hybrid system with oxygen vacancies.
SEPARATION AND PURIFICATION TECHNOLOGY
(2022)
Article
Engineering, Chemical
Linlin Hou et al.
Summary: This study prepared a photocatalyst with a dual Z-scheme heterojunction structure by electrostatic self assembly, which exhibited excellent photocatalytic performance under visible light, indicating its potential application value.
SEPARATION AND PURIFICATION TECHNOLOGY
(2022)
Article
Chemistry, Multidisciplinary
Xueming Dang et al.
Summary: This study successfully improves the efficiency of producing H2O2 from H2O and O2 by constructing a Z-scheme photocatalytic system. The MnIn2S4/WO3(Yb, Tm) photocatalytic system designed in this research shows high productivity of H2O2 and excellent light absorption capability.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING
(2022)
Article
Chemistry, Inorganic & Nuclear
Jiale He et al.
Summary: Developing efficient photocatalysts for simultaneous removal of heavy metals and organic pollutants is a challenging task. In this study, hierarchical S-scheme heterostructured photocatalysts were successfully prepared and demonstrated remarkable photocatalytic activities in the synchronous removal of Cr(VI) and TC. The enhanced photocatalytic activities were attributed to the hierarchical structure and S-scheme migration mechanism, which promoted the separation and utilization efficiency of photoinduced electrons and holes.
INORGANIC CHEMISTRY
(2022)
Article
Engineering, Environmental
Guoqiang Zhang et al.
Summary: Efficient and robust CO2 photoreduction and water splitting photocatalysts are essential for closing the carbon cycle and developing H-2 energy source. The ultra-small pomegranate-like Z-scheme CdIn2S4/ZnIn2S4 heterojunctions with abundant vacancies showed significantly improved performance in photocatalytic conversion, with high yields and excellent stability during continuous operation. This study provides a practical approach for fabricating ultrasmall pomegranate-like Z-scheme nano-heterostructures with abundant vacancies, showing promise for diverse environmental and energy applications.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Engineering, Chemical
Chen-Xiao Xu et al.
Summary: In this study, a FeTiO3/g-C3N4 hybrid architecture was synthesized via self-assembly and used as an efficient visible-light-driven photo-Fenton catalyst for pollutant degradation. The remarkable photo-Fenton activity of this hybrid architecture was attributed to the S-scheme charge transfer pathway generated by the intimate interfacial contacts between FeTiO3 and g-C3N4. This research provides useful insights for the design and fabrication of S-scheme photo-Fenton catalysts for environmental remediation.
SEPARATION AND PURIFICATION TECHNOLOGY
(2022)
Article
Engineering, Chemical
Hongfei Yin et al.
Summary: Energy crisis and environmental problems caused by Cr(VI)-containing wastewater have attracted increasing attention due to the rapid development of human society. In this study, CeO2/CdS nanocomposites were successfully fabricated for photocatalytic hydrogen evolution and Cr(VI) reduction. The hybrid catalysts exhibited remarkable photocatalytic activities, surpassing the single components. The improved performance can be attributed to the unique electron and hole transfer pathway.
SEPARATION AND PURIFICATION TECHNOLOGY
(2022)
Article
Chemistry, Physical
Xiangyu Meng et al.
Summary: In this study, a new strategy for photocatalytic hydrogen production is proposed. The hybrid photocatalyst composed of Ni-Co Prussian blue analogue and CdS is transformed into a more active hybrid photocatalyst consisting of NiS and CdS during photo-catalysis in the sulfur sacrificial reagent. This strategy can enhance the photocatalytic hydrogen production performance of the catalyst, and the transition of the carrier transfer mechanism is supported by transient absorption spectroscopy.
Article
Engineering, Chemical
Yuzhen Li et al.
Summary: In this study, a ternary Fe-doped CdIn2S4/g-C3N4 catalyst was successfully prepared and it was found to have a wider visible-light response range and narrower bandgap compared to g-C3N4 and binary CdIn2S4/g-C3N4 catalysts. The ternary catalyst was able to significantly reduce the recombination rate of carriers generated under illumination and increase the dark adsorption, thus promoting the progress of the photocatalytic reaction.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
(2022)
Article
Chemistry, Physical
Qiuming Wei et al.
Summary: This study demonstrates a solvothermal approach to synthesize a P-C3N4/MIL-88A composite, which exhibits superior photocatalytic performance in terms of hydrogen generation rate and ofloxacin degradation rate. The enhancement mechanisms are attributed to the unique interface properties, good photoinduced electron mobility, and electron-hole pair separation ability of the 2D/3D heterojunction.
JOURNAL OF ALLOYS AND COMPOUNDS
(2022)
Article
Chemistry, Physical
Yingjun Wang et al.
Summary: A novel hierarchical Z-scheme MnO2/MnIn2S4 heterojunction photocatalyst was successfully constructed for efficient photocatalytic reduction of Cr(VI) in wastewater. The catalyst exhibited excellent reduction performance over a wide pH range and showed great potential for practical applications.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2022)
Article
Engineering, Chemical
Hao Yang et al.
Summary: S-scheme hybrid MIL-101(Fe)/WO3 samples were prepared by immobilizing MIL-101(Fe) nanoparticles on the surface of WO3 nanoplates. The resulting hybrid sample exhibited highly efficient visible light-driven photocatalytic activity and good photostability, making it effective for the removal of TCH.
SEPARATION AND PURIFICATION TECHNOLOGY
(2022)
Article
Chemistry, Multidisciplinary
Boyuan Wu et al.
Summary: A hierarchical CoP@ZnIn2S4 photocatalyst prepared using a MOF-templated strategy exhibited excellent stability and a high H-2 evolution rate of 0.103 mmol h(-1) due to its unique composition and morphology, which facilitate carrier separation, enhance light absorption, and provide a high surface area.
CHEMICAL COMMUNICATIONS
(2022)
Article
Chemistry, Applied
Jing-Yu Li et al.
Summary: By fabricating Ni-doped ZnIn2S4 composite nanosheets, an effective solar-driven selective dehydrocoupling reaction was achieved to produce high-value products. The optimized electron structure and improved photoredox activity of ZIS/Ni enable various aromatic alcohols dehydrocoupling reactions.
CHINESE JOURNAL OF CATALYSIS
(2022)
Article
Engineering, Environmental
Hongfei Yin et al.
Summary: A new type of hybrid photocatalyst with a three-dimensional/two-dimensional heterostructure was fabricated to treat Cr(VI) wastewater via photoreduction, exhibiting excellent performance. The key factors contributing to the enhanced performance are the increased specific surface areas, improved light absorption, and Z-scheme charge carriers' separation and migration pathway.
JOURNAL OF HAZARDOUS MATERIALS
(2021)
Article
Engineering, Environmental
Jiao Huang et al.
Summary: In this study, N-doped TiO2 with abundant and tunable oxygen vacancies was successfully synthesized, showing superior photocatalytic performance. The introduction of N into TiO2 resulted in higher efficiency of photogenerated electron/hole separation and demonstrated better performance in dye removal.
JOURNAL OF HAZARDOUS MATERIALS
(2021)
Article
Engineering, Chemical
Xiaohan Zhao et al.
Summary: Two-dimensional disk-like shape titanium oxide with controllable phase was prepared using NH2-MIL-125 (Ti) as template by pyrolysis at different atmospheres process to acquire TiO2 and A/R-TiO2. Subsequently, 2D/3D core-shell heterostructures were built, with CdIn2S4@A/R-TiO2 showing higher BET surface area and better photocatalytic performance. The proposed photocatalysis mechanism involves Z-scheme for CdIn2S4@TiO2 and II-scheme for CdIn2S4@A/R-TiO2-1.2.
SEPARATION AND PURIFICATION TECHNOLOGY
(2021)
Article
Chemistry, Physical
Hongjun Dong et al.
Summary: The photocatalytic activity of bimetallic co-doped g-C3N4 can be significantly enhanced due to improved charge separation efficiency and visible light harvest ability. Density functional theory investigations show that the incorporation of Co/V into g-C3N4 results in a bimetallic synergetic regulating effect on electronic structure, improving physical, optical, and photoelectrochemical properties.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2021)
Article
Chemistry, Multidisciplinary
Hongfei Yin et al.
Summary: CdIn2S4/g-C3N4 heterojunctions with different weight ratios, particularly the optimized sample with a 5:2 weight ratio, showed the highest photocatalytic activity for TCH degradation and good photostability. The unique 2D/2D structure promoted the separation and migration of photoinduced charge carriers, enhancing molecular oxygen activation and therefore improving photocatalytic activity. This work may offer a scalable approach for molecular oxygen activation in photocatalysis.
Article
Chemistry, Applied
Bin Zhang et al.
Summary: The design and construction of heterojunction photocatalysts with staggered energy band structure and appropriate interfacial contact is an effective way to achieve outstanding photocatalytic performance. A novel 2D/2D BiOBr/g-C3N4 heterojunction was successfully obtained by a convenient in situ self-assembly route, showing superior degradation and hydrogen production activity under simulated sunlight irradiation.
CHINESE JOURNAL OF CATALYSIS
(2021)
Article
Chemistry, Physical
Ya-Ya Yang et al.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2020)
Article
Chemistry, Physical
Heyan Jiang et al.
CATALYSIS SCIENCE & TECHNOLOGY
(2020)
Article
Engineering, Chemical
Feng Guo et al.
SEPARATION AND PURIFICATION TECHNOLOGY
(2019)
Article
Engineering, Environmental
Yajun Zou et al.
CHEMICAL ENGINEERING JOURNAL
(2019)
Article
Chemistry, Physical
Baibai Liu et al.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2018)
Article
Chemistry, Multidisciplinary
Zhongzhou Cheng et al.
Article
Nanoscience & Nanotechnology
Chao Zeng et al.
ACS APPLIED MATERIALS & INTERFACES
(2017)
Review
Chemistry, Physical
Jingxiang Low et al.
Article
Engineering, Environmental
Wei Chen et al.
JOURNAL OF HAZARDOUS MATERIALS
(2016)
Article
Chemistry, Multidisciplinary
Qing Han et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2015)
Article
Chemistry, Multidisciplinary
Fenfen Shi et al.
CHEMICAL COMMUNICATIONS
(2015)
Article
Chemistry, Physical
Min Liu et al.
CHEMISTRY OF MATERIALS
(2011)
Article
Chemistry, Physical
I Tsuji et al.
JOURNAL OF PHYSICAL CHEMISTRY B
(2005)
Article
Chemistry, Multidisciplinary
I Tsuji et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
(2004)
