☆ 4.7 Article

Facile and complete sulfuric acid leaching of zinc ferrite assisted by copper powder: Leaching mechanism and kinetics investigation

SEPARATION AND PURIFICATION TECHNOLOGY (2024)

Related references

Note: Only part of the references are listed.

Review Chemistry, Multidisciplinary

Evaluation and Current State of Primary and Secondary Zinc Production-A Review

Henryk Kania et al.

Summary: This article provides a comprehensive overview of the history, production, and demand of zinc. It discusses the production quantity of primary and secondary zinc, along with an economic analysis of zinc prices. The article presents the various methods used to obtain zinc from ores and analyzes the global zinc market and its applications. Furthermore, it explores technologies for zinc recovery from scrap, particularly from galvanized steel, emphasizing the importance of recycling due to the high volatility in zinc prices and its limited natural resources.

APPLIED SCIENCES-BASEL (2023)

Add to Collection

Article Crystallography

Phase Transformation and Zinc Extraction from Zinc Ferrite by Calcium Roasting and Ammonia Leaching Process

Zeqiang Xie et al.

Summary: In this study, CaO was used to degrade zinc ferrite and recover zinc through ammonia leaching. The experimental results demonstrated that the phase transformation of zinc ferrite to zinc oxide and dicalcium ferrite could be achieved completely with the addition of an appropriate amount of CaO. The ammonia leaching tests showed a high zinc leaching rate of approximately 90% under optimal roasting conditions.

CRYSTALS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Recovery of metallic copper from waste printed circuit boards via H3NO3S-NaCl-H2O2 leaching system

Shulian Guo et al.

Summary: In this study, sulfamic acid was used to leach copper from waste printed circuit boards, and the addition of sodium chloride and hydrogen peroxide was found to promote the dissolution of copper. The results showed that this method can efficiently and environmentally recover copper.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Reductive leaching of indium from the neutral leaching residue using oxalic acid in sulfuric acid solution

F. Maddah et al.

Summary: This study evaluates the reductive leaching of indium from indium-bearing zinc ferrite using oxalic acid as a reducer in sulfuric acid solution. The main factors affecting the process rate were evaluated, confirming the efficiency of dissolving indium in the presence of oxalic acid. A kinetic model based on the factors under study is presented.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2021)

Add to Collection

Article Engineering, Chemical

Reductive leaching of indium from zinc-leached residue using galena as reductant

Yangyang Fan et al.

Summary: A new reductive leaching process using galena as reductant has been developed to achieve extensive leaching of zinc and indium from the indium-bearing zinc-leached residue. A shrinking core model controlled by surface chemical reaction best fitted the leaching process of indium. The apparent activation energy of indium leaching was calculated to be 64 kJ/mol, with reaction orders of -0.34 and 1.47 with respect to particle size and initial H2SO4 concentration, respectively.

MINERALS ENGINEERING (2021)

Add to Collection

Review Green & Sustainable Science & Technology

Pyrometallurgical recovery of zinc and valuable metals from electric arc furnace dust - A review

Jie Wang et al.

Summary: Electric arc furnace dust (EAFD) is a kind of metallurgical solid waste with huge production, and how to efficiently recover valuable metals from it has become the aim of various treatment processes. This paper discusses the physical and chemical properties of EAFD, as well as various treatment processes and the properties of the metals obtained from them. It provides theoretical guidance and practical reference for the treatment and utilization of EAFD.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Engineering, Chemical

Application of zinc ferrite reduction in the extraction of Zn, Ga and In from zinc refinery residue

Vivek Kashyap et al.

Summary: A method to enhance the leaching kinetics of zinc refinery residue (ZRR) with significant impact on the leaching of zinc, gallium, and indium was introduced in the study. Reduction roasting of zinc ferrite (ZF) eased the leaching process, achieving over 90% extraction of the target elements. Characterization of ZRR was conducted using various techniques including LA ICP-MS, SEM, XRD, and automated mineralogy.

MINERALS ENGINEERING (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Comprehensive recycling of zinc and iron from smelting waste containing zinc ferrite by oriented transformation with SO2

Yan-Chun Li et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Engineering, Environmental

Metal mobility and toxicity of zinc hydrometallurgical residues

Rong Wang et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effect of zinc ions on copper electrodeposition in the context of metal recovery from waste printed circuit boards

T. R. Da Silva et al.

HYDROMETALLURGY (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Reductive leaching of indium-bearing zinc ferrite in sulfuric acid using sulfur dioxide as a reductant

Yangyang Fan et al.

HYDROMETALLURGY (2019)

Add to Collection

Article Multidisciplinary Sciences

Zinc recovery from metallurgical slag and dust by coordination leaching in NH3-CH3COONH4-H2O system

Aiyuan Ma et al.

ROYAL SOCIETY OPEN SCIENCE (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Sulfuric acid leaching of high iron-bearing zinc calcine

Jin-lin Yang et al.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Sulfidation behavior of ZnFe2O4 roasted with pyrite: Sulfur inducing and sulfur-oxygen interface exchange mechanism

Xiaobo Min et al.

APPLIED SURFACE SCIENCE (2016)

Add to Collection

Article Green & Sustainable Science & Technology

Reductive clean leaching process of cadmium from hydrometallurgical zinc neutral leaching residue using sulfur dioxide

Chun Zhang et al.

JOURNAL OF CLEANER PRODUCTION (2016)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Reductive leaching of zinc and indium from industrial zinc ferrite particulates in sulphuric acid media

Fan Zhang et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2016)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Study on separating of zinc and iron from zinc leaching residues by roasting with ammonium sulphate

Yanchun Li et al.

HYDROMETALLURGY (2015)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Reductive acid leaching of cadmium from zinc neutral leaching residue using hydrazine sulfate

Chun Zhang et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)

Add to Collection

Article Engineering, Chemical

A novel method to recover zinc and iron from zinc leaching residue

Huan Yan et al.

MINERALS ENGINEERING (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Recovery of copper and tin from stripping tin solution by electrodeposition

Bin Li et al.

RARE METALS (2014)

Add to Collection

Article Chemistry, Analytical

Novel pro-oxidant activity assay for polyphenols, vitamins C and E using a modified CUPRAC method

Esin Kondakci et al.

TALANTA (2013)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Reductive leaching of gallium from zinc residue

Xuelan Wu et al.

HYDROMETALLURGY (2012)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Cementation of copper from spent copper-pickle sulfate solution by zinc ash

I. M. Ahmed et al.

HYDROMETALLURGY (2011)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Zinc recovery from franklinite by sulphation roasting

Zhang Yali et al.

HYDROMETALLURGY (2011)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effect of mechanical activation on the kinetics of extracting indium from indium-bearing zinc ferrite

Yanjuan Zhang et al.

HYDROMETALLURGY (2010)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Application of ferric chloride both as oxidant and complexant to enhance the dissolution of metallic copper

Zhike Wang et al.

HYDROMETALLURGY (2010)

Add to Collection

Article Electrochemistry

Characterization of copper powder particles obtained by electrodeposition as function of different current densities

V. M. Maksimovic et al.

JOURNAL OF APPLIED ELECTROCHEMISTRY (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Roasting of La Oroya zinc ferrite with Na2CO3

Preston C. Holloway et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2007)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effect of variables on the quality of hematite precipitated from sulfate solutions

M. C. Ruiz et al.

HYDROMETALLURGY (2007)

Add to Collection

Article Engineering, Chemical

A kinetic study of copper cementation with zinc in aqueous solutions

Nizamettin Demirkiran et al.

INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2007)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Hydrometallurgical extraction of zinc from zinc ferrites

N Leclerc et al.

HYDROMETALLURGY (2003)

Add to Collection

Article Engineering, Chemical

Extraction of zinc from zinc ferrites by fusion with caustic soda

Z Youcai et al.

MINERALS ENGINEERING (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.