Related references
Note: Only part of the references are listed.
Review
Chemistry, Applied
Quanyan Man et al.
Summary: This review provides an overview of the research progress on Si/C anodes in lithium-ion batteries. It highlights the lithiation mechanism, solid electrolyte interface formation, and various carbon sources used in Si/C anodes. The review also summarizes and prospects the selection of carbonaceous materials, structural design, and interface control of Si/C anodes, as well as their application in all-solid-state lithium-ion batteries and sodium-ion batteries.
JOURNAL OF ENERGY CHEMISTRY
(2023)
Article
Chemistry, Physical
Xiancheng Wang et al.
Summary: Alloying elemental foil, such as Sn, Al, In, etc., as anodes in high-energy-density Li-ion batteries shows great promise due to their attractive capacities, low cost, and easy processability. However, poor electrochemical performance is caused by abundant Li loss, uneven electrochemical reactions, and continuous side reactions. In this study, a conformal heterogeneous Li-alloy interface alloying elemental foil (Sn/Li-LA) was constructed, which could suppress side reactions and homogenize electrochemical reactions. The cycle life and efficiency of batteries were significantly improved.
ENERGY STORAGE MATERIALS
(2023)
Article
Chemistry, Applied
Peibo Gao et al.
Summary: Silicon is a promising material for next-generation lithium-ion battery anodes due to its high theoretical capacity and low cost. However, its poor cyclability and rate performance limit its large-scale applications. In this study, hollow silicon/germanium nanospheres combined with porous carbon are synthesized and used as lithium-ion battery anodes. The experimental results show that these anodes have small volume expansion, high ion/electron conductivity, and stable electrode interface, while theoretical calculations suggest that using germanium instead of silicon can improve lithium storage ability. These unique characteristics enable the anodes to exhibit high initial specific capacity, superior rate capability, excellent cycling stability, and outstanding stability even at high loading. Moreover, when paired with LiFePO4 cathode, the full-cell shows impressive capacity performance.
JOURNAL OF ENERGY CHEMISTRY
(2023)
Article
Nanoscience & Nanotechnology
Jiuwu Wang et al.
Summary: A three-dimensional ordered macroporous bimetallic (Mn, Fe) selenide modified by a carbon layer (3DOM-MnFeSex@C) composite with a heterojunction interface was fabricated through selenizing a 3D ordered macroporous Mn-based Prussian Blue analogue single crystal. The 3DOM-MnFeSex@C exhibited hierarchically porous architecture with enhanced mass-transfer efficiency and superior electronic conductivity, leading to excellent rate performance and extended cycling life as a sodium storage anode for sodium ion batteries.
ACS APPLIED MATERIALS & INTERFACES
(2023)
Article
Chemistry, Physical
Chengxin Yu et al.
Summary: In this paper, homotype heterojunctions were designed on hard carbon (HC) anodes to improve their initial Coulombic efficiency (ICE) and cycling stability for sodium-ion batteries. By constructing a homotypic amorphous Al2O3 layer on the HC, the active sites were shielded, electrolyte decomposition and side effects were inhibited, and the interface resistance was decreased. The optimized HC anode exhibited outstanding reversible capacity and improved cycling stability, providing a new strategy for the application of hard carbon in sodium-ion batteries.
Article
Chemistry, Multidisciplinary
Yu Jiang et al.
Summary: Metallic Na (K) is a promising anode material for Na-metal and K-metal batteries, but the growth of Na (K) dendrites affects their stability. This study introduces a heterogeneous interface layer to improve the performance of the batteries, resulting in enhanced lifespan, capacity, energy density, and power density.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Zhiwei Liu et al.
Summary: This study reports a titanium-based anode material, Na2TiGeO5, with high capacity, excellent performance, and low discharge voltage platforms. The Li+ storage mechanism and conversion reaction process are elucidated, providing a new approach for efficient energy storage.
Article
Materials Science, Multidisciplinary
Rui Jia et al.
Summary: Metal sulfides are promising anode materials for sodium-ion batteries due to their high theoretical capacities. This study fabricated Sb2S3/SnS2/C heterostructures with enhanced material stability and improved ion and electron transport. The heterostructures exhibited high reversible capacity and good rate performance, making them promising anode materials for SIBs.
SCIENCE CHINA-MATERIALS
(2022)
Article
Nanoscience & Nanotechnology
Dan Zhang et al.
Summary: This study addresses the issues of the shuttle effect and slow oxidation-reduction kinetics in lithium-sulfur batteries by preparing a ZnFe2O4-Ni5P4 Mott-Schottky heterojunction material. The self-generated built-in electric field in ZnFe2O4-Ni5P4 regulates charge distribution and accelerates electron transfer at the interface. Additionally, the collaboration of metal oxides and metal phosphides enhances the adsorption of polysulfides and accelerates reaction kinetics.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Article
Nanoscience & Nanotechnology
Hongwei Zhang et al.
Summary: Researchers have successfully addressed the issue of volumetric expansion during cycling in layered molybdenum disulfide (MoS2) by designing a three-dimensional heterostructure of MoS2@MXene@D-TiO2. This unique structure prevents aggregation and restacking of MoS2 and promotes high Na+ transportation, resulting in an impressive high-rate reversible capacity and excellent cycling stability in sodium-ion batteries.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Article
Nanoscience & Nanotechnology
Kingshuk Roy et al.
Summary: Li-ion batteries are the highest performing rechargeable batteries, but traditional graphite anodes have limitations in meeting the increasing energy density requirements. Therefore, research on alternative anode materials is crucial. Additionally, the use of earth abundant materials for battery electrodes can reduce costs.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Article
Chemistry, Physical
Shuyun Wan et al.
Summary: The development of high-capacity anode materials is crucial for sodium-ion batteries. In this study, a binary metal sulfides CoS@SnS heterostructure confined in carbon microspheres (denoted as (CoSn)S/C) was synthesized. The (CoSn)S/C composite exhibited high reversible capacity and superior durability, making it a promising anode material for sodium-ion batteries. The density functional theory (DFT) calculations provided insights into the mechanism and significance of the constructed CoS@SnS heterostructure.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2022)
Article
Chemistry, Physical
Xiaotong Li et al.
Summary: In this study, hetero-structured hybrids CoS2/NC@VS4 were synthesized, which exhibited outstanding rate capability and stable cycle performance for sodium and potassium ion batteries due to the full contact with electrolytes and shortened diffusion distance of electrons and ions.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2022)
Article
Chemistry, Physical
Jin Liang et al.
Summary: Transition metal phosphides (TMPs) show promise as anode materials for sodium ion batteries due to their high theoretical capacity and abundance. A new electrode design using metal hydroxides and glucose as precursors can enhance the sodium storage performance of TMPs, with Ni2P@C core shell structures demonstrating high capacity and excellent cyclability.
Review
Chemistry, Multidisciplinary
Xuexia Lan et al.
Summary: This article summarizes the recent progress on tin dioxide (SnO2) as a typical representative and elaborates on the reverse conversion reaction. It proposes two effective approaches, promoting Li2O decomposition and maintaining high Sn/Li2O interface density, and introduces some in/ex situ characterizations focusing on the conversion reaction.
Article
Chemistry, Physical
Pan Xue et al.
Summary: In this study, a dual-functional skeleton is designed to simultaneously regulate the sulfur cathode and lithium anode of lithium-sulfur batteries. The skeleton provides excellent anchoring, confinement, and electrocatalytic functions to inhibit the shuttling of lithium polysulfides and the growth of lithium dendrites. The optimized full battery exhibits excellent electrochemical performance.
ADVANCED ENERGY MATERIALS
(2022)
Article
Chemistry, Physical
Chunhui Wang et al.
Summary: This study proposes a stable framework with a nest-like structure for rapid and permanent ion insertion/extraction, solving the issue of structural failure caused by uncontrollable structural evolution. It introduces the concept of synchronous self-evolution confinement to control inner strain and alleviate electrode pulverization, resulting in improved electrode stability and structural integrity. The nest-like architecture demonstrates excellent performance as a sodium ion battery anode.
ADVANCED ENERGY MATERIALS
(2022)
Article
Chemistry, Applied
Yaqin Qi et al.
Summary: In this study, a self-healing anode for lithium-ion batteries was developed using polypyrrole and polyacrylic acid. The tightly wrapped structure of the electrode, formed by coating liquid metal nanoparticles, exhibited superior cycling stability and rate capability.
JOURNAL OF ENERGY CHEMISTRY
(2022)
Article
Chemistry, Physical
Cuimei Fu et al.
Summary: This study investigates the migration, nucleation, and growth behavior of lithium using lithiophilic CoP-doped carbon nanofibers as a substrate. The CoP@CNF substrate allows for uniform adsorption, charge transportation, and concentration gradient, effectively suppressing dendritic lithium deposition. When paired with a LiFePO4 cathode, the CoP@CNF@Li composite anode demonstrates excellent cycling stability and high specific capacity.
ENERGY STORAGE MATERIALS
(2022)
Article
Chemistry, Physical
Jiamei Wang et al.
Summary: This study presents a strategy to construct a FeSe2/CoSe2/C (FCSe@C) material with a heterostructure within the void space of a carbon sphere using a combination of melting diffusion and selenization. The FCSe@C@void@C electrode demonstrates prominent energy storage properties in sodium/potassium ion batteries, and the improved performance is attributed to the rational design of double carbon architectures and the understanding of the heterogeneous interfaces.
ENERGY STORAGE MATERIALS
(2022)
Article
Chemistry, Physical
Nesrin Bugday et al.
Summary: Composite anode materials Fe/Co/S@NPC-T were synthesized by sulfurization and pyrolysis of Fe/Co-based ZIF-12. The materials exhibited good structural properties and rechargeable performance.
JOURNAL OF ALLOYS AND COMPOUNDS
(2022)
Article
Nanoscience & Nanotechnology
Ran Sui et al.
Summary: A dual carbon design strategy is proposed in this study to address the issues of sluggish electrochemical kinetics and poor long-term stability in transition metal sulfides and oxides as anode materials for sodium-ion batteries. The dual carbon design effectively promotes electron transfer, provides more electrochemical active sites, and buffers volume expansion, leading to enhanced reaction kinetics and long-term cycling property.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Article
Nanoscience & Nanotechnology
Jian Yu et al.
Summary: The study focuses on the challenges of sodium/potassium ion storage and proposes a novel MoO2/MoSe2@NPC heterostructure embedded in one-dimensional carbon nanofiber. This heterostructure effectively improves rate performance and cycle life for sodium ion batteries and potassium ion batteries by decreasing diffusion pathway and providing abundant active sites. The optimized heterointerfaces between MoO2 and MoSe2 result in enhanced electron transfer kinetics.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Article
Chemistry, Multidisciplinary
Ki-Hun Nam et al.
Summary: The study suggests that Li-compound anodes are a promising category of high-performance LIB anodes, capable of simultaneously meeting the requirements for high reversibility and safety.
Article
Chemistry, Multidisciplinary
Chengzhi Ke et al.
Summary: This study showcases a novel design of ZnS/Sn@NPC heterostructures as a superior anode material for lithium-ion batteries. The heterostructures with abundant heterointerfaces, interconnected porous architecture, and highly conductive nitrogen-doped carbon matrix provide plentiful active sites, facilitate charge transfer, and enhance structural stability. The fabricated ZnS/Sn@NPC anode exhibits high reversible capacity, high-rate capability, and long cycling stability.
ADVANCED FUNCTIONAL MATERIALS
(2022)
Review
Chemistry, Multidisciplinary
Manqi Peng et al.
Summary: Alloy-type anodes have high theoretical capacity but face challenges such as volume expansion and fragility. This review summarizes recent progress in the research of batteries based on alloy-type anodes and highlights improvements in structural design, protective interface, and electrolyte selection as effective means to enhance their performance.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2022)
Article
Chemistry, Applied
Zhixin Liang et al.
Summary: In this study, a pomegranate-inspired porous carbon shell wrapped heterogeneous SnSe/ZnSe composite (SnSe/ZnSe@C) was designed and fabricated, showing excellent performance in sodium-ion batteries. The carbon shell acted as an adhesive to improve the electron/ion transfer efficiency and inhibit volume change, while the abundant heterostructure interface accelerated the transport. The electrode exhibited high specific capacity, excellent rate performance, and remarkable cycling stability.
JOURNAL OF ENERGY CHEMISTRY
(2022)
Article
Chemistry, Physical
Zhaoqian Yan et al.
Summary: Heterogeneous interface and structural engineering are important for enhancing the electrochemical performance of lithium-ion batteries. In this study, heterostructures of hollow Fe3O4/FeP spheres coated with a carbon shell were designed to improve lithium storage performance. The H-Fe3O4/FeP@C spheres exhibited good rate performance and long cyclic performance, and the underlying mechanism was explained by density functional theory calculations. Additionally, the hollow structure of the H-Fe3O4/FeP@C spheres alleviated volume expansion and shortened Li ion diffusion distance.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2022)
Review
Chemistry, Physical
Ruotong Li et al.
Summary: This article provides a comprehensive review of the application and research progress of zinc alloying strategies in aqueous zinc ion batteries (AZIBs), presenting different improvement mechanisms and discussing potential prospects for further enhancing the alloying of zinc anodes.
ACS ENERGY LETTERS
(2022)
Review
Chemistry, Physical
Taiyu Lyu et al.
Summary: This review discusses the progress and applications of carbon material/lithium composite anodes in lithium metal batteries. The focus is on addressing issues such as heterogeneous lithium deposition, dendrite growth, and poor Coulombic efficiency by using carbon materials as stabilizing hosts for lithium. The design of stereoscopic carbon materials to facilitate lithium-ion flux and nucleation, and the control of lithium deposition kinetics to mitigate dendrite formation are highlighted.
ADVANCED ENERGY MATERIALS
(2022)
Article
Nanoscience & Nanotechnology
Amardeep Amardeep et al.
Summary: The development of faceted crystalline Sb particles reinforced with reduced graphene oxide (rGO) has demonstrated the achievement of true enhancement in a composite material, which shows potential for application in Na-ion batteries with high reversible Na-storage capacity and cyclic stability.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Article
Chemistry, Multidisciplinary
Navpreet Kamboj et al.
Summary: In this study, a mix-phase SnO-SnO2@rGO structure was designed and prepared, which exhibited excellent electrochemical performance as a negative electrode material for Li-ion batteries, including ultrahigh reversible capacity and superior rate capabilities.
Article
Chemistry, Multidisciplinary
Shuang Jing et al.
Summary: This article presents a method of growing layered polyhedral cobalt oxide and cobalt disulphide heterostructures on carbon cloth as an anode material for lithium-ion batteries. The heterostructures effectively enhance charge transfer capability and increase the electrical conductivity of the material, leading to high capacity and outstanding cycling life.
ADVANCED MATERIALS INTERFACES
(2022)
Article
Chemistry, Physical
Yi-Yen Hsieh et al.
Summary: In this study, a novel Bi2S3/Bi2Se3 vdWHs heterostructure is designed as an anode material for potassium ion batteries and hybrid capacitors, demonstrating excellent performance and feasibility for practical applications.
ENERGY STORAGE MATERIALS
(2022)
Article
Chemistry, Physical
Gang Huang et al.
Summary: A V2S3@C@V2S3 heterostructure anode with abundant hetero-interfaces and controllable V2S3 crystallinity and size was developed, showing highly reversible capacity and excellent cycling stability.
MATERIALS TODAY ENERGY
(2022)
Article
Chemistry, Physical
Vinoth Ganesan et al.
Summary: A ternary Fe2GeS4 compound has been synthesized and applied as versatile electrodes for rechargeable batteries. The compound exhibits high electrochemical performance and can be used in various battery systems.
JOURNAL OF MATERIALS CHEMISTRY A
(2022)
Article
Chemistry, Multidisciplinary
Hui Zhang et al.
Summary: Hollow multi-shelled structures (HoMSs) composed of metal oxide heterojunctions can enhance the performance of anodes for lithium-ion batteries. The addition of heterojunctions improves the rate capability of the HoMSs.
MATERIALS CHEMISTRY FRONTIERS
(2022)
Article
Chemistry, Physical
Yonglin Huang et al.
Summary: The utilization of Li alloy anodes in solid-state batteries has gained attention due to their high capacity and improved interfacial stability. This study evaluates the dendrite suppression capability of common Li alloys and finds that Li-Al alloy exhibits the highest capability. This finding suggests that Li-Al alloy has potential as a promising anode for high-rate and high-capacity solid-state batteries.
JOURNAL OF MATERIALS CHEMISTRY A
(2022)
Article
Materials Science, Multidisciplinary
Zhenghang Wei et al.
Summary: The future of high-energy density electrochemical energy storage systems relies on rechargeable batteries that utilize reactive metals as anodes. Potassium (K) metal secondary battery (KMB) is expected to replace lithium-ion batteries due to its abundant resource, high capacity, and low redox potential. However, the processing difficulty and instability at high temperatures hinder the development of KMBs.
ENERGY & ENVIRONMENTAL MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Chen Hu et al.
Summary: The development of a new photoaccelerated rechargeable lithium-ion battery utilizing SnO2/TiO2 as a multifunctional anode has led to significant improvements in lithiation kinetics, electrochemical reversibility, and capacity without capacity loss after 100 cycles. This breakthrough offers a promising pathway to overcoming the energy density limitations in lithium-ion batteries through efficient conversion and storage of solar energy.
ADVANCED MATERIALS
(2021)
Review
Chemistry, Multidisciplinary
Xiao-Ru Chen et al.
Summary: Lithium metal as a promising alternative anode material for high-energy-density batteries is crucial in the new era of advanced energy storage. Understanding the deposition mechanism from nucleation to early growth is essential for improving battery performance and dendrite-free deposition behavior. Various models have been proposed to enhance the insight into the lithium deposition process, opening up new possibilities for practical lithium metal batteries.
ADVANCED MATERIALS
(2021)
Article
Chemistry, Physical
Chen Yang et al.
Summary: Based on first-principles calculations, graphite nanomesh with a hole density of 46% (GN46) is demonstrated to be a promising anode material for both NIB and KIB, with high ion storage capacities and improved diffusion properties.
Article
Chemistry, Physical
Lingfeng Zhu et al.
Summary: Inspired by the structure of areca, MnO@C composites with a core-shell structure were successfully prepared and demonstrated superior performance in lithium-ion batteries. The formation mechanism of the composites was successfully clarified through heterogeneous contraction and carbon pyrolysis processes.
Article
Chemistry, Multidisciplinary
Bochao Chen et al.
Summary: In this study, a core-shelled Sb@Sb2O3 heterostructure encapsulated in 3D N-doped carbon hollow-spheres was successfully fabricated, which not only promotes Na+/K+ transfer, but also increases storage capacity and alleviates volume changes during cycling. Experimental results show that this composite structure exhibits excellent performance in both sodium-ion battery and potassium-ion battery applications.
Article
Chemistry, Physical
Qianhui Huang et al.
Summary: The heterostructured CoSe@NC nanocubes, fabricated through a simple annealing and in-situ selenization process, show excellent potassium-ion storage performance with high initial charge capacity, superior cyclic stability, and exceptional rate capability. The use of ZIF-67 nanocubes as a template for porous structure formation facilitates the construction of a heterogeneous interface, effectively stabilizing CoSe and increasing diffusion mobility. The low-cost and facile production approach makes CoSe@NC a promising anode material for PIBs.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2021)
Article
Chemistry, Physical
Ping Gao et al.
Summary: The hetero-MoO3/MoO2@NC composite anodes exhibit impressive rate capability and long lifespan in both potassium and sodium ion batteries, with a balance of sustainable storage and durable structure stability. The architecture significantly improves electronic conductivity and offers abundant oxygen deficiencies, showing promise for potassium/sodium storage applications.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2021)
Article
Chemistry, Physical
Yuanming Wu et al.
Summary: This review summarizes the recent advances in rational design of carbon materials for developing anodes for potassium-ion batteries, including practical issues with various carbon materials as anodes, potassium storage mechanisms, and design methods for carbon materials. The ultimate goal is to develop next-generation carbon anodes with high energy density and excellent cycling stability.
ENERGY STORAGE MATERIALS
(2021)
Article
Chemistry, Physical
Chenchen Zhang et al.
Summary: Researchers are increasingly interested in the development of rechargeable batteries using potassium instead of lithium as the charge carrier, as this technology is considered a promising choice for large-scale energy storage. However, research on potassium ion batteries (PIBs) is still in its early stages, facing various challenges, including the need to find a suitable anode material. Two-dimensional materials show great potential in battery applications due to their unique properties.
ENERGY STORAGE MATERIALS
(2021)
Review
Materials Science, Ceramics
P. M. Gonzalez Puente et al.
Summary: All-solid-state lithium batteries with garnet-type solid electrolyte LLZO show high energy density, electrochemical stability, and compatibility with various materials, making them an ideal solution for addressing battery safety issues and meeting the energy storage demands in electric vehicles and other applications.
JOURNAL OF ADVANCED CERAMICS
(2021)
Article
Electrochemistry
Suning Gao et al.
Summary: A novel negative electrode material containing SnS2/SnS p-n heterostructures embedded in S,N-doped carbon layer supported by hollow carbon spheres has been developed for sodium ion batteries. This material shows promising initial reversible capacity, superior rate capability, and long cycle life, making it a potential candidate for future battery technologies.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY
(2021)
Review
Chemistry, Physical
Lianbo Ma et al.
Summary: Potassium-ion batteries (PIBs) have emerged as appealing alternatives to conventional lithium-ion batteries (LIBs) due to their wide potential window, fast ionic conductivity, and reduced cost. Despite facing challenges such as slow reaction kinetics and large volume expansion, various strategies, especially in electrode design, have been proposed to address these issues. Recent progress on advanced anode materials of PIBs has been systematically discussed, highlighting the design principles and structure-performance relationship to pave the way for practical applications.
Review
Chemistry, Applied
Wenjin Yang et al.
Summary: Alkali metal ion batteries are crucial in the energy revolution due to their large capacity/power density and abundance of alkali metal ions. Gallium-based materials with impressive capacity utilization and self-healing ability offer a potential solution to the inherent deficiencies of current anodes.
JOURNAL OF ENERGY CHEMISTRY
(2021)
Review
Chemistry, Applied
Mingchi Jiang et al.
Summary: Sodium-ion batteries (SIBs) are gaining attention as alternatives to lithium-ion batteries for large-scale energy storage, with carbon materials considered competitive anodes due to their low cost and structural stability. Pitch, a raw material with high carbon content and low cost, is ideal for producing carbon materials. However, the ordered microstructures of pitch-based carbon negatively impact sodium ion storage. Efforts to improve sodium storage performance include morphology adjustments, heteroatoms doping, fabricating heterostructures, and increasing disorder. This review provides insight into developing low-cost, high-performance pitch-based carbon anodes for SIBs.
JOURNAL OF ENERGY CHEMISTRY
(2021)
Article
Materials Science, Ceramics
Liming Liu et al.
Summary: By adjusting the solvents, CoCO3 particles with different particle and pore sizes were prepared in this study. Among them, CoCO3 synthesized with diethylene glycol as the solvent showed the best electrochemical performance, achieving high specific capacity, excellent capacity retention, and robust structural stability. These results provide important reference for the design and stable cycle performance of pure CoCO3.
JOURNAL OF ADVANCED CERAMICS
(2021)
Article
Nanoscience & Nanotechnology
Yun Chen et al.
Summary: The SnS2/FeS2/rGO composite material shows superior electrochemical performance in sodium-ion batteries, with high cycle stability and rate performance.
ACS APPLIED MATERIALS & INTERFACES
(2021)
Article
Nanoscience & Nanotechnology
Zhe Dong et al.
Summary: A novel Sn-bonded Si anode is proposed, showing superior cyclic stability and high rate performance by improving electronic conductivity and enhancing adhesive strength of the electrode.
ACS APPLIED MATERIALS & INTERFACES
(2021)
Article
Chemistry, Physical
Ki-Hun Nam et al.
Summary: Rechargeable K-ion batteries have drawn much attention as a potential replacement for Li-ion batteries due to the abundance and low cost of potassium. By amorphizing and prepotassiating carbon black, a high-performance C-based anode was obtained, significantly improving the K storage properties and enhancing electrochemical performance. The prepotassiated/amorphized CB exhibited high reversible capacity, exceptional initial Coulombic efficiency, high rate capability, and remarkable cycling stability, making it a promising material for future KIB anodes.
Review
Materials Science, Multidisciplinary
Xin Wang et al.
Summary: Alloying anodes are gaining interest for high-performance alkalimetal-ion batteries due to their high specific capacities, low working voltages, and natural abundance. However, challenges such as unsatisfactory cycle life due to violent volumetric and structural changes have led to the development of multimetallic anodes that can accommodate induced strain for high Coulomb efficiency and long cycle life. Efforts have also been made to understand structural changes and reaction mechanisms through in-situ characterization methodologies.
Review
Chemistry, Multidisciplinary
Libin Fang et al.
Summary: This article discusses the storage mechanisms, challenges, and improvement strategies of conversion-alloying anode materials in sodium ion batteries, and proposes a development roadmap for advanced materials for commercializable SIBs.
Article
Chemistry, Multidisciplinary
Kefeng Xie et al.
Summary: The Fe doping strategy in GaN improved electrical conductivity and charge-transfer efficiency, providing abundant nanochannels for efficient ionic transfer and reduced Li diffusion barrier. Fe covalently doped GaN nanowires exhibited enhanced Li+ storage performance, demonstrating the potential for efficient Li+ storage electrodes.
ARABIAN JOURNAL OF CHEMISTRY
(2021)
Article
Chemistry, Multidisciplinary
Jian Lin et al.
Summary: The Sb2S3@SnS@C nanocomposites with a hollow-tube-heterostructure show improved performance for sodium-ion batteries, including cycling stability and rate capacity.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING
(2021)
Article
Materials Science, Ceramics
Pengfei Wu et al.
Summary: The study introduced a pomegranate-type Si/C composite anode, which utilizes a combination of silicon and SiC to enhance the performance of the silicon anode, including promoting dual charge transfer and improving the tap density of the electrode.
JOURNAL OF ADVANCED CERAMICS
(2021)
Article
Chemistry, Physical
Song Yang et al.
Summary: Transition metal carbides (TMCs) are considered promising anode materials for sodium ion batteries due to their high conductivity and chemical stability, but their practical applications have been hindered by slow kinetics and volume expansion. A universal strategy of loading high work-function metal quantum dots (QDs) to provide a directional charge transfer path by constructing the interfacial Mott-Schottky heterojunction has been proposed to address these issues and enhance the sodium storage capability of TMCs, leading to unprecedented capacity, rate performance, and cycling stability.
ENERGY STORAGE MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Yongling An et al.
Summary: By designing and constructing a protective heterogeneous layer composed of sulfur-doped three-dimensional (3D) MXene and ionic conductive ZnS on the zinc anode, the issues of dendrite growth and side reactions hindering the practical applications of zinc anode in aqueous batteries have been successfully addressed. This results in a stable and dendrite-free zinc anode with notable cycling stability and high-rate performance.
Article
Materials Science, Multidisciplinary
Yongshang Zhang et al.
Summary: This study developed a flexible Li-S battery architecture based on electrocatalyzed cathodes, which successfully improved the conversion kinetics between sulfur species by enhancing both ion and electron transportation as well as affinity to polysulfides, leading to homogeneous deposition of Li2S in the catalyzed cathodes. The highly active electro-electrocatalysts-based cells exhibited remarkable rate capability and high specific capacity, even under ultra-high sulfur loading and low electrolyte/sulfur ratio conditions.
Article
Chemistry, Physical
Pan Xue et al.
Summary: By utilizing a structure-induced partial phase transformation method, hierarchical hollow TiO2/TiN heterostructure fibers with a high specific surface area were successfully synthesized as an anode material. The interfacial effect of the heterostructures improved charge transfer capability for the anode materials.
JOURNAL OF MATERIALS CHEMISTRY A
(2021)
Review
Chemistry, Multidisciplinary
Peng Li et al.
Summary: The growing demand for green energy has driven the exploration of sustainable and eco-friendly energy storage systems, with potassium-ion batteries (KIBs) emerging as a promising alternative to lithium-ion batteries. Key focus lies in the need to explore superior anode materials and overcome critical issues and challenges in KIB technology.
Article
Chemistry, Physical
Shoujie Guan et al.
Summary: Anatase TiO2 is a promising anode material for sodium-ion batteries, but its shortcomings in semiconductor properties and sluggish Na+ diffusion kinetics hinder further development. A heterojunction TiO2@TiOF2 structure constructed with two-dimensional nanosheets shows stable cycling performance for up to 10,000 cycles at high current densities, attributed to its unique structure and the in situ formation of a NaF protective layer. Density functional theory calculations indicate that the heterostructure TiO2@TiOF2 nanosheets exhibit improved electrical conductivity and lower formation energies of Na+ ions compared to the separated TiO2 and TiOF2.
JOURNAL OF MATERIALS CHEMISTRY A
(2021)
Article
Chemistry, Physical
Wenxi Zhao et al.
Summary: Hierarchical heterostructure coupling metal sulfides with carbonaceous functional support shows promising performance as anode candidates in sodium-ion batteries. The developed ZnS/CuS@C architecture exhibits impressive cycling life and competitive rate capability due to the synergistic coupling effect of heterostructures. Kinetics analysis and theoretical calculations suggest that the heterointerface induces large pseudocapacitive behaviors and ultrafast sodiation kinetics.
JOURNAL OF MATERIALS CHEMISTRY A
(2021)
Article
Chemistry, Multidisciplinary
Congcheng Wang et al.
Article
Chemistry, Physical
Fu Sun et al.
ACS ENERGY LETTERS
(2020)
Review
Chemistry, Multidisciplinary
Dan Zhang et al.
Article
Engineering, Chemical
Hui Cheng et al.
Journal of Energy Chemistry
(2020)
Article
Chemistry, Physical
Junxiong Wu et al.
JOURNAL OF MATERIALS CHEMISTRY A
(2020)
Article
Chemistry, Multidisciplinary
Zhipeng Cui et al.
Article
Chemistry, Physical
Mingxiang Hu et al.
Article
Chemistry, Physical
Fu Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS
(2019)
Article
Chemistry, Physical
Nan Xiao et al.
Article
Nanoscience & Nanotechnology
Rakesh Verma et al.
ACS APPLIED MATERIALS & INTERFACES
(2019)
Article
Nanoscience & Nanotechnology
Andrew J. Naylor et al.
ACS APPLIED MATERIALS & INTERFACES
(2019)
Article
Chemistry, Physical
A-Young Kim et al.
Article
Engineering, Environmental
Xuejiao Hu et al.
CHEMICAL ENGINEERING JOURNAL
(2019)
Review
Chemistry, Multidisciplinary
Hua Wang et al.
Article
Chemistry, Multidisciplinary
Xing Ou et al.
Article
Chemistry, Physical
Jing Xia et al.
ENERGY STORAGE MATERIALS
(2019)
Article
Chemistry, Physical
Xuan Lu et al.
ENERGY STORAGE MATERIALS
(2019)
Article
Astronomy & Astrophysics
Gao-Yuan Zhang et al.
ASTROPHYSICAL JOURNAL
(2019)
Article
Chemistry, Physical
Qichang Pan et al.
JOURNAL OF MATERIALS CHEMISTRY A
(2019)
Article
Chemistry, Multidisciplinary
Huabin Kong et al.
MATERIALS CHEMISTRY FRONTIERS
(2019)
Review
Materials Science, Multidisciplinary
Atanu Bag et al.
JOURNAL OF MATERIALS CHEMISTRY C
(2019)
Article
Nanoscience & Nanotechnology
Yufei Zhang et al.
ACS APPLIED MATERIALS & INTERFACES
(2018)
Article
Chemistry, Physical
Youyu Zhu et al.
Article
Engineering, Environmental
Kai Chen et al.
CHEMICAL ENGINEERING JOURNAL
(2018)
Article
Engineering, Environmental
Wenming Zhang et al.
CHEMICAL ENGINEERING JOURNAL
(2018)
Review
Materials Science, Multidisciplinary
Xiao Han et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
(2018)
Review
Chemistry, Physical
Jianfeng Mao et al.
JOURNAL OF MATERIALS CHEMISTRY A
(2018)
Article
Chemistry, Physical
Junfeng Liu et al.
JOURNAL OF MATERIALS CHEMISTRY A
(2018)
Review
Chemistry, Physical
Wanlin Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A
(2018)
Review
Chemistry, Multidisciplinary
Yan Lu et al.
Article
Chemistry, Physical
JunMin Ge et al.
ADVANCED ENERGY MATERIALS
(2018)
Article
Nanoscience & Nanotechnology
Di Wu et al.
Article
Chemistry, Physical
Changshin Jo et al.
JOURNAL OF MATERIALS CHEMISTRY A
(2017)
Article
Chemistry, Physical
Hezhen Xie et al.
JOURNAL OF MATERIALS CHEMISTRY A
(2017)
Article
Chemistry, Physical
Hong-En Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A
(2017)
Article
Chemistry, Physical
Danni Lan et al.
Article
Chemistry, Multidisciplinary
Feifei Lu et al.
ADVANCED MATERIALS INTERFACES
(2017)
Article
Chemistry, Physical
Fuhua Yang et al.
Review
Chemistry, Multidisciplinary
Wei Luo et al.
ACCOUNTS OF CHEMICAL RESEARCH
(2016)
Article
Multidisciplinary Sciences
Guoqiang Tan et al.
NATURE COMMUNICATIONS
(2016)
Article
Chemistry, Multidisciplinary
Yongming Sun et al.
Article
Electrochemistry
Yuxiao Lin et al.
ELECTROCHIMICA ACTA
(2014)