4.7 Article

Flame doping of indium ions into TiO2 nanorod arrays for enhanced photochemical water oxidation

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

CeO2/TiO2 Heterojunction Nanotube Arrays for Highly Efficient Visible-Light Photoelectrochemical Water Splitting

Shi -Wei Lin et al.

Summary: Composite of rare earth oxides with TiO2 nanotube arrays effectively modifies the PEC behavior of TiO2. A CeO2/TiO2 heterojunction was prepared by loading CeO2 nanoparticles on anodized TiO2 nanotube arrays, demonstrating high photocurrent density and hydrogen evolution rate.

ACS APPLIED ENERGY MATERIALS (2023)

Article Energy & Fuels

Ultrathin metal Ni layer on ZnO/TiO2 photoelectrodes with excellent photoeletrochemical performance in multiple electrolyte solutions

Dongbo Xu et al.

Summary: In this paper, ZnO/TiO2 photoelectrodes with rich oxygen vacancy (Ovac) were synthesized by electrostatic adsorption using ZIF-8 as the precursor. An ultrathin Ni layer of about 7 nm was then deposited on the surface of ZnO/TiO2 to enhance the photocurrent. The Ni/ZnO/TiO2 photoelectrodes showed the highest photocurrent and good durability in multiple electrolyte solutions, and the ultrathin Ni layer improved the water splitting performance and charges transfer.
Article Chemistry, Inorganic & Nuclear

Construction of WO3 quantum dots/TiO2 nanowire arrays type II heterojunction via electrostatic self-assembly for efficient solar-driven photoelectrochemical water splitting

Ning Zhang et al.

Summary: Construction of a heterojunction between quantum dots and TiO2 nanowire arrays via electrostatic self-assembly is rarely reported. In this work, the surface potential of WO3 quantum dots and TiO2 nanowire arrays was changed using mercury lamp irradiation, resulting in WO3 quantum dots tightly attached to the TiO2 nanowire surface through electrostatic self-assembly. Photoelectrochemical measurements showed that the WO3 quantum dots formed a type II heterojunction with the TiO2 nanowire arrays, greatly improving the contribution of the WO3 quantum dots to the photocurrent. The self-assembled system exhibited excellent photoelectrochemical stability and significantly enhanced photocurrent density compared to the TiO2 nanowire arrays.

DALTON TRANSACTIONS (2023)

Article Chemistry, Multidisciplinary

Boosting the photoelectrochemical water oxidation performance of bismuth vanadate by ZnCo2O4 nanoparticles

Jingwei Huang et al.

Summary: By constructing a ZnCo2O4/BiVO4 heterojunction photoanode, the photocurrent density and water oxidation efficiency can be effectively improved, demonstrating the potential application in water splitting.

CHINESE CHEMICAL LETTERS (2022)

Article Chemistry, Physical

Heterojunction between bimetallic metal-organic framework and TiO2: Band-structure engineering for effective photoelectro-chemical water splitting

Ji Won Yoon et al.

Summary: In this study, bimetallic Fe/Ni-based metal-organic frameworks (MOFs) with different Fe/Ni ratios were coated on TiO2 nanorods to investigate the performance of heterojunction photoanodes in photoelectrochemical water splitting. An ideal band alignment was achieved between TiO2 nanorods and bimetallic MOFs with an optimum Fe/Ni ratio, leading to enhanced photocurrent density.

NANO RESEARCH (2022)

Article Multidisciplinary Sciences

Subsurface oxygen defects electronically interacting with active sites on In2O3 for enhanced photothermocatalytic CO2 reduction

Weiqin Wei et al.

Summary: The study demonstrates that metallic In-embedded In2O3 nanoflake catalyst effectively extracts electrons from subsurface oxygen defects, increasing electron density of surface active sites and improving electronic coupling with CO2. This opens up new insights for electronic manipulation of oxygen defects in catalytic reactions.

NATURE COMMUNICATIONS (2022)

Article Chemistry, Physical

MOF derived NiO thin film formed p-n heterojunction with BiVO4 photoelectrode for enhancement of PEC performance

Song Zhang et al.

Summary: In this work, a novel and easy method was used to attach Ni-MOF on the surface of BiVO4 photoelectrode via electrostatic attraction. The resulting Ni-MOF/BiVO4 photoelectrodes were then annealed to obtain MOF derived NiO/BiVO4 p-n heterojunction composite photoelectrodes. The NiO/BiVO4 composite photoelectrodes showed enhanced photoelectrochemical performance for water splitting compared to pure BiVO4 photoelectrode.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Review Chemistry, Multidisciplinary

Interfacial Charge Transport in 1D TiO2 Based Photoelectrodes for Photoelectrochemical Water Splitting

Zhongrui Yu et al.

Summary: This review provides a comprehensive overview of current research efforts towards the development of 1D TiO2-based photoelectrodes for heterogeneous PEC water splitting, discussing the influences of nanoarchitectures and energy band engineering on interfacial charge transfer and separation. Additionally, the review explores the interactions between 1D TiO2 and photoactive materials of different dimensions.

SMALL (2021)

Article Chemistry, Physical

ZIF-8 derived ZnO/TiO2 heterostructure with rich oxygen vacancies for promoting photoelectrochemical water splitting

Qijia Ding et al.

Summary: By using ZIF-8 as the precursor, ZnO/TiO2 photoelectrodes were prepared through electrostatic interaction, leading to the formation of abundant oxygen vacancies in the heterojunction. The optimal photocurrent density of the photoelectrode reached 1.76 mA/cm(2) at 1.23 V vs. RHE, which is 2.75 times that of pure TiO2. The IPCE of the best photoelectrode increased to 58.2% at 390 nm, with charge injection and separation efficiencies reaching 93.53% and 51.62%, respectively.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Review Chemistry, Physical

Metal-organic framework derived Co3O4/TiO2 heterostructure nanoarrays for promote photoelectrochemical water splitting

Qijia Ding et al.

Summary: A new method was proposed to fabricate Co3O4 modified TiO2 nanorods photoelectrode, significantly improving the photoelectrochemical performance. The improved performance can be attributed to the constructed p-n heterostructure and the increased number of active sites derived from MOFs.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Review Chemistry, Inorganic & Nuclear

Synthesis and control strategies of nanomaterials for photoelectrochemical water splitting

Zhengang Guo et al.

Summary: Photoelectrochemical water splitting is an effective way to capture and convert solar energy into chemical energy, addressing current energy and environmental issues. Enhancing the efficiency of solar energy conversion relies on optimizing the performance of semiconductor photoelectrodes, including photon absorption, charge separation, and surface chemical reactions.

DALTON TRANSACTIONS (2021)

Article Engineering, Environmental

Synthesis of ternary spinel MCo2O4 (M = Mn, Zn)/BiVO4 photoelectrodes for photolectrochemical water splitting

Dongbo Xu et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Engineering, Chemical

Flame Reduced TiO2 Nanorod Arrays with Ag Nanoparticle Decoration for Efficient Solar Water Splitting

Biyi Chen et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)

Review Chemistry, Multidisciplinary

Design of Heterostructured Hollow Photocatalysts for Solar-to-Chemical Energy Conversion

Peng Zhang et al.

ADVANCED MATERIALS (2019)

Article Chemistry, Physical

Indium-Doped TiO2 Photocatalysts with High-Temperature Anatase Stability

Vignesh Kumaravel et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

Review Chemistry, Multidisciplinary

Nanostructured materials for photocatalysis

Chunping Xu et al.

CHEMICAL SOCIETY REVIEWS (2019)

Article Chemistry, Multidisciplinary

Promoted Fixation of Molecular Nitrogen with Surface Oxygen Vacancies on Plasmon-Enhanced TiO2 Photoelectrodes

Chengcheng Li et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Article Chemistry, Physical

Effect of growth techniques on the structural, optical and electrical properties of indium doped TiO2 thin films

Faisal S. Al Mashary et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Article Chemistry, Multidisciplinary

Charge Recombination with Fractional Reaction Orders in Water-Splitting Dye-Sensitized Photoelectrochemical Cells

Pengtao Xu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Article Materials Science, Ceramics

Preparation and characterization of transparent indium- doped TiO2 films deposited by MOCVD

Wei Zhao et al.

CERAMICS INTERNATIONAL (2017)

Article Chemistry, Physical

Binary Indium-Zinc Oxide Photoanodes for Efficient Dye-Sensitized Solar Cells

Andreas Kunzmann et al.

ADVANCED ENERGY MATERIALS (2016)

Article Chemistry, Physical

Indium-doped TiO2 nanoparticles for photocatalytic CO2 reduction with H2O vapors to CH4

Muhammad Tahir et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2015)

Article Engineering, Environmental

Gas-phase photocatalytic decomposition of ethylbenzene over perlite granules coated with indium doped TiO2

M. Hinojosa-Reyes et al.

CHEMICAL ENGINEERING JOURNAL (2013)

Article Chemistry, Physical

Understanding the effect of surface/bulk defects on the photocatalytic activity of TiO2: anatase versus rutile

Junqing Yan et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)