4.8 Review

A comprehensive review on durability improvement of solid oxide fuel cells for commercial stationary power generation systems

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

Mo-doped BaCe0•9Y0•1O3-δ proton-conducting electrolyte at intermediate temperature SOFCs. Part I: Microstructure and electrochemical properties

Muhammad Bilal Hanif et al.

Summary: This study prepared single-phase BaCe0.9-xMoxY0.1O3-delta electrolyte via sol-gel method and investigated its structure, composition, electrochemical performance, and thermal stability. The conductivity of the grain interior and boundaries between 127 and 727 degrees C was reported for the first time in SOFC studies.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2023)

Article Materials Science, Ceramics

Facile and low-temperature synthesis approach to fabricate Sm0.5Sr0.5CoO3-δ cathode material for solid oxide fuel cell

Sheraz Ahmed et al.

Summary: We report the synthesis of a facilely synthesized Sm0.5Sr0.5CoO3 (SSC) nano-catalyst as a cathode material for solid oxide fuel cells (SOFCs). The SSC nano-catalyst showed excellent crystallinity and morphology, with an average particle size of 100 nm after calcination at 1250 degrees C. The resulting SSC material exhibited a peak power density of 900 mWcm(-2) at 700 degrees C and excellent stability under accelerated operating conditions. This work presents a cost-effective and scalable method for producing highly robust SSC cathode material for SOFCs.

JOURNAL OF THE KOREAN CERAMIC SOCIETY (2023)

Article Chemistry, Physical

A heuristic approach to boost the performance and Cr poisoning tolerance of solid oxide fuel cell cathode by robust multi-doped ceria coating

Hafiz Ahmad Ishfaq et al.

Summary: Here, we report a highly conductive, robust, and innovative Gd and Pr multi-doped ceria (GPDC) coating to enhance the ORR kinetics and stability against Cr poisoning of the state-of-the-art LSCF cathode. The GPDC coating significantly improves the ORR kinetics by improving the surface of the LSCF cathode and shows a two-fold increase in electrochemical performance compared to the bare LSCF cathode. It also exhibits outstanding stability in an accelerated Cr poisoning test, attributed to the alleviation of SrCrO4 formation. Both relaxation time-based analysis and experimental results confirm that the GPDC coating enhances the ORR activity and Cr tolerance of the LSCF cathode.

APPLIED CATALYSIS B-ENVIRONMENTAL (2023)

Article Energy & Fuels

Control-oriented dynamic process optimization of solid oxide electrolysis cell system with the gas characteristic regarding oxygen electrode delamination

Zhiping Xia et al.

Summary: Fast response, strong reliability, and high efficiency are critical objectives for a solid oxide electrolysis cell (SOEC) system. This study proposes a novel SOEC system dynamic model that considers the gas characteristic regarding oxygen electrode delamination for optimizing operation. The advantages are discussed through optimization analysis, and the constraints of oxygen electrode delamination, fuel starvation, and power fast tracking during dynamic switching are investigated. The findings provide a basis for developing control strategies for SOEC systems with fluctuating energy input.

APPLIED ENERGY (2023)

Article Thermodynamics

Control-oriented performance prediction of solid oxide electrolysis cell and durability improvement through retard oxygen electrode delamination with reverse operation

Zhiping Xia et al.

Summary: This paper proposes a multiscale degradation model to investigate the sensitivity of the alleviation of oxygen electrode delamination to reverse operating conditions. The model is validated and the multiscale degradation behaviors are discussed. The analysis shows that LZO formation is the main cause of cell degradation, and higher temperature and current density lead to faster degradation. A new parameter of LZO layer thickness is introduced to evaluate the sensitivities of durability improvement, and the effects of different operating variables are assessed.

ENERGY CONVERSION AND MANAGEMENT (2023)

Article Chemistry, Physical

Durability improvement of large-area anode supported solid oxide fuel cell fabricated by 4-layer sequential co-lamination and co-firing process

Amjad Hussain et al.

Summary: In this study, a thin-film based 4-layered anode-supported solid oxide fuel cell with a large-area was fabricated. The cell showed a high-power output of 41.5W at 50A and a maximum power density of 1.6 Wcm-2 at 700 degrees C. Long-term testing demonstrated a degradation rate of 0.2% kh-1 at 25A current, meeting the stringent benchmark for commercialization.

JOURNAL OF POWER SOURCES (2023)

Article Materials Science, Ceramics

Ultra-fast route to fabricate large-area anode-supported solid oxide fuel cell via microwave-assisted sintering

Amjad Hussain et al.

Ceramics International (2023)

Review Materials Science, Multidisciplinary

Proton-conducting solid oxide electrolysis cells: Relationship of composition-structure-property, their challenges, and prospects

Muhammad Bilal Hanif et al.

Summary: Proton-conducting solid oxide electrolysis cells (H-SOECs) have gained significant attention due to their advantages over ion-conducting SOECs (O-SOECs). However, progress in H-SOECs lags behind O-SOECs, primarily due to the low stability of electrolytes in environments with H2O and CO2. This review critically evaluates recent developments in H-SOECs and discusses future research directions.

MATTER (2023)

Article Chemistry, Physical

Boosting performance of the solid oxide fuel cell by facile nano-tailoring of La0.6Sr0.4CoO3-d cathode

Hafiz Ahmad Ishfaq et al.

Summary: Controlling the drying rate enables the formation of a continuous film-like active catalyst on the cathode of solid oxide fuel cells, leading to significantly improved performance and durability of the cells.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Article Chemistry, Physical

Sintering behavior of BaCe0.7Zr0.1Y0.2O3-δ electrolyte at 1150 °C with the utilization of CuO and Bi2O3 as sintering aids and its electrical performance

Zaheer Ud Din Babar et al.

Summary: The effect of dual sintering aids on the sinterability and electrochemical properties of BCZY electrolyte was investigated. The results showed that using CuO-Bi2O3 as an aid significantly improved the densification and sinterability of BCZY, making it more suitable for solid oxide fuel cells.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Review Materials Science, Multidisciplinary

Recent progress of perovskite-based electrolyte materials for solid oxide fuel cells and performance optimizing strategies for energy storage applications

Muhammad Bilal Hanif et al.

Summary: This review summarizes recent developments and prospects of perovskite electrolyte materials in solid oxide fuel cells, emphasizing various design strategies and challenges.

MATERIALS RESEARCH BULLETIN (2022)

Article Engineering, Environmental

Recent advancements, doping strategies and the future perspective of perovskite-based solid oxide fuel cells for energy conversion

Muhammad Bilal Hanif et al.

Summary: Solid oxide fuel cells (SOFCs) hold promise for energy conversion technology, but face challenges such as component degradation and sulfur poisoning. This article discusses various electrode materials and improvements to enhance electrochemical performance, highlighting critical challenges for advancement.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Engineering, Multidisciplinary

Composite cathodes for protonic ceramic fuel cells: Rationales and materials

Meng Wang et al.

Summary: The article discusses the design principles and materials of protonic ceramic fuel cells and their composite cathodes, exploring the advantages and challenges of operating at low temperatures, with a focus on the importance of high-performance cathode materials.

COMPOSITES PART B-ENGINEERING (2022)

Article Chemistry, Physical

Modeling and analysis of cross-flow solid oxide electrolysis cell with oxygen electrode/electrolyte interface oxygen pressure characteristics for hydrogen production

Zhiping Xia et al.

Summary: This study proposes a 2-D cross-flow stack model with new gas characteristics to estimate the spatial distribution of thermal, electrical, and gas characteristics in solid oxide electrolysis cells (SOEC). The analysis shows that adding the new gas characteristics can optimize the operating envelope and improve the safety and operating life of the stack.

JOURNAL OF POWER SOURCES (2022)

Review Materials Science, Ceramics

Controlling cation migration and inter-diffusion across cathode/interlayer/ electrolyte interfaces of solid oxide fuel cells: A review

Muhammad Zubair Khan et al.

Summary: Solid oxide fuel cells (SOFCs) are a potential way to achieve efficient and clean electrochemical energy conversion, but commercialization is hindered by material degradation, especially at the cathode-electrolyte interface. Understanding cation migration and interdiffusion is crucial for improving SOFC durability, with perovskite-based oxides showing promising results. Control measures for interdiffusion in the cathode/electrolyte/interlayer are key to designing highly efficient and stable SOFCs.

CERAMICS INTERNATIONAL (2021)

Review Materials Science, Ceramics

Flat-tubular solid oxide fuel cells and stacks: a review

Muhammad Zubair Khan et al.

Summary: Solid oxide fuel cells (SOFCs) offer high efficiency and clean energy conversion advantages, but their high operating temperature limits them to stationary applications. Research on geometrically modified flat-tubular (FT) SOFC cells and stacks show improved performance compared to tubular types and better stability than planar types. The use of interconnect materials, high temperatures, and current density are critical factors for cell durability. New stack designs are being explored to enhance performance and stability.

JOURNAL OF ASIAN CERAMIC SOCIETIES (2021)

Article Materials Science, Ceramics

Effect of applied current density on the degradation behavior of anode-supported flat-tubular solid oxide fuel cells

Muhammad Zubair Khan et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Review Electrochemistry

An overview of degradation in solid oxide fuel cells-potential clean power sources

I. Sreedhar et al.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2020)

Review Materials Science, Ceramics

Review of composite cathodes for intermediate-temperature solid oxide fuel cell applications

Azreen Junaida Abd Aziz et al.

CERAMICS INTERNATIONAL (2020)

Review Chemistry, Physical

Development of lanthanum strontium cobalt ferrite perovskite electrodes of solid oxide fuel cells - A review

San Ping Jiang

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Review Chemistry, Analytical

Recent advances in material and performance aspects of solid oxide fuel cells

I. Sreedhar et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2019)

Article Chemistry, Physical

Hot corrosion of yttria-stabilized zirconia by liquid antimony and antimony oxide

Jiyang Ma et al.

JOURNAL OF POWER SOURCES (2019)

Article Electrochemistry

Accelerated degradation of yttria stabilized zirconia electrolyte during high-temperature water electrolysis

Aziz Nechache et al.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2019)

Article Materials Science, Ceramics

Thermodynamic perspective of Sr-related degradation issues in SOFCs

Xiaoyan Yin et al.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2018)

Article Chemistry, Physical

Improving sulfur tolerance of Ni-YSZ anodes of solid oxide fuel cells by optimization of microstructure and operating conditions

Muhammad Taqi Mehran et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Article Chemistry, Physical

Effects of applied current density and thermal cycling on the degradation of a solid oxide fuel cell cathode

Muhammad Zubair Khan et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Article Chemistry, Physical

A simplified approach to predict performance degradation of a solid oxide fuel cell anode

Muhammad Zubair Khan et al.

JOURNAL OF POWER SOURCES (2018)

Article Chemistry, Physical

Impact of Nickel agglomeration on Solid Oxide Cell operated in fuel cell and electrolysis modes

M. Hubert et al.

JOURNAL OF POWER SOURCES (2018)

Article Chemistry, Physical

Sr and Zr transport in PLD-grown Gd-doped ceria interlayers

Jeffrey C. De Vero et al.

SOLID STATE IONICS (2018)

Review Chemistry, Physical

Sr Segregation in Perovskite Oxides: Why It Happens and How It Exists

Bonjae Koo et al.

JOULE (2018)

Article Electrochemistry

Study of Operating Parameters for Accelerated Anode Degradation in SOFCs

A. Ploner et al.

FUEL CELLS (2017)

Article Chemistry, Physical

Chemical stability and electrical and mechanical properties of BaZrxCe0.8-xY0.2O3 with CeO2 protection method

Jhe-Wei Jhuang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Article Chemistry, Physical

Nano-CeO2 and -LaCrO3 dispersed ferritic stainless steels as potential interconnect materials for solid oxide fuel cells

Muhammad Taqi Mehran et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Article Electrochemistry

SrZrO3 Formation at the Interlayer/Electrolyte Interface during (La1-xSrx)1-δCo1-yFeyO3 Cathode Sintering

Zigui Lu et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Article Materials Science, Ceramics

Fabrication of dense and defect-free diffusion barrier layer via constrained sintering for solid oxide fuel cells

Sung-Il Lee et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

Article Chemistry, Physical

Hierarchical hollow nanofiber networks for high-performance hybrid direct carbon fuel cells

Jia Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Proceedings Paper Electrochemistry

Nano-Oxide Dispersed Ferritic Stainless Steel for Metallic Interconnects of Solid Oxide Fuel Cells

Muhammad Taqi Mehran et al.

SOLID OXIDE FUEL CELLS 15 (SOFC-XV) (2017)

Article Materials Science, Ceramics

Effect of grain boundary diffusion on electrolyte stability in direct carbon fuel cells with antimony anodes

Tianyu Cao et al.

CERAMICS INTERNATIONAL (2017)

Review Chemistry, Multidisciplinary

Challenges in developing direct carbon fuel cells

Cairong Jiang et al.

CHEMICAL SOCIETY REVIEWS (2017)

Proceedings Paper Electrochemistry

Effect of SrZrO3 Formation at LSCF-Cathode/GDC-Interlayer Interfaces on the Electrochemical Properties of Solid Oxide Fuel Cells

Jeffrey C. De Vero et al.

SOLID STATE IONIC DEVICES 11 (2017)

Article Energy & Fuels

Upgrading Indonesian Low-Rank Coal with an Oil Coating

Muhammad Zubair Khan et al.

INTERNATIONAL JOURNAL OF COAL PREPARATION AND UTILIZATION (2016)

Review Electrochemistry

Anodes for Carbon-Fueled Solid Oxide Fuel Cells

Wei Zhou et al.

CHEMELECTROCHEM (2016)

Article Materials Science, Ceramics

Effect of GDC interlayer thickness on durability of solid oxide fuel cell cathode

Muhammad Zubair Khan et al.

CERAMICS INTERNATIONAL (2016)

Article Chemistry, Multidisciplinary

Role of coal characteristics in the electrochemical behaviour of hybrid direct carbon fuel cells

A. Fuente-Cuesta et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Article Energy & Fuels

Catalytic gasification of carbon in a direct carbon fuel cell

Adam C. Rady et al.

Article Electrochemistry

Mechanisms of Performance Degradation of (La,Sr)(Co,Fe)O3-delta Solid Oxide Fuel Cell Cathodes

Hongqian Wang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)

Review Green & Sustainable Science & Technology

A review on cell/stack designs for high performance solid oxide fuel cells

Bora Timurkutluk et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Review Chemistry, Physical

Trends in electrode development for next generation solid oxide fuel cells

Wang Hay Kan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Article Energy & Fuels

Anode-Supported Solid Oxide Fuel Cell Achieves 70000 Hours of Continuous Operation

Ludger Blum et al.

ENERGY TECHNOLOGY (2016)

Article Chemistry, Physical

Effect of various sintering inhibitors on the long term performance of Ni-YSZ anodes used for SOFCs

Muhammad Shirjeel Khan et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)

Article Chemistry, Physical

Accelerated testing of solid oxide fuel cell stacks for micro combined heat and power application

Anke Hagen et al.

JOURNAL OF POWER SOURCES (2015)

Article Physics, Condensed Matter

Thermal expansion of materials in the barium cerate-zirconate system

Yu G. Lyagaeva et al.

PHYSICS OF THE SOLID STATE (2015)

Review Materials Science, Multidisciplinary

Progress in material selection for solid oxide fuel cell technology: A review

Neelima Mahato et al.

PROGRESS IN MATERIALS SCIENCE (2015)

Review Chemistry, Physical

Layered LnBaCo(2)O(5+delta) perovskite cathodes for solid oxide fuel cells: an overview and perspective

Jung-Hyun Kim et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Review Chemistry, Physical

Heterogeneous Catalyst Deactivation and Regeneration: A Review

Morris D. Argyle et al.

CATALYSTS (2015)

Article Chemistry, Physical

Effect of GDC interlayer on the degradation of solid oxide fuel cell cathode during accelerated current load cycling

Muhammad Zubair Khan et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)

Article Chemistry, Physical

Ni-YSZ-supported tubular solid oxide fuel cells with GDC interlayer between YSZ electrolyte and LSCF cathode

Seung-Young Park et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)

Article Chemistry, Physical

A performance study of hybrid direct carbon fuel cells: Impact of anode microstructure

Ji-Yong Lee et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)

Article Chemistry, Physical

BaZr0.2Ce0.8-xYxO3-δ solid oxide fuel cell electrolyte synthesized by so-gel combined with composition-exchange method

Chung-Jen Tseng et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)

Article Chemistry, Physical

Sr and Zr diffusion in LSCF/10GDC/8YSZ triplets for solid oxide fuel cells (SOFCs)

Fangfang Wang et al.

JOURNAL OF POWER SOURCES (2014)

Article Chemistry, Physical

Effect of polarization on Sr and Zr diffusion behavior in LSCF/GDC/YSZ system

Fangfang Wang et al.

SOLID STATE IONICS (2014)

Review Chemistry, Multidisciplinary

Critical Review of Carbon Conversion in Carbon Fuel Cells

Turgut M. Guer

CHEMICAL REVIEWS (2013)

Article Electrochemistry

Long-Term Testing of SOFC Stacks at Forschungszentrum Julich

L. Blum et al.

FUEL CELLS (2013)

Article Electrochemistry

Chromium Poisoning of LaMnO3-Based Cathode within Generalized Approach

H. Yokokawa et al.

FUEL CELLS (2013)

Article Chemistry, Physical

Study of Sr2Mg(Mo0.8Nb0.2)O6_δ as anode material for solid oxide fuel cells using hydrocarbons as fuel

M. J. Escudero et al.

JOURNAL OF POWER SOURCES (2013)

Article Chemistry, Multidisciplinary

Cation Size Mismatch and Charge Interactions Drive Dopant Segregation at the Surfaces of Manganite Perovskites

Wonyoung Lee et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)

Article Chemistry, Physical

Suppression of Sr surface segregation in La1-xSrxCo1-yFeyO3-δ: a first principles study

Hepeng Ding et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)

Article Chemistry, Multidisciplinary

Demonstration of high power, direct conversion of waste-derived carbon in a hybrid direct carbon fuel cell

Cairong Jiang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2012)

Review Energy & Fuels

Review of Fuels for Direct Carbon Fuel Cells

Adam C. Rady et al.

ENERGY & FUELS (2012)

Article Electrochemistry

Influence of High Current Cycling on the Performance of SOFC Single Cells

Markus J. Heneka et al.

JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY (2012)

Article Chemistry, Physical

Reversible Compositional Control of Oxide Surfaces by Electrochemical Potentials

Eva Mutoro et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2012)

Article Chemistry, Physical

A flat-tubular solid oxide fuel cell with a dense interconnect film coated on the porous anode support

Beom-Kyeong Park et al.

JOURNAL OF POWER SOURCES (2012)

Review Thermodynamics

A comprehensive review of direct carbon fuel cell technology

S. Giddey et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2012)

Article Chemistry, Physical

Electrochemically driven cation segregation in the mixed conductor La0.6Sr0.4Co0.2Fe0.8O3-δ

M. Finsterbusch et al.

SOLID STATE IONICS (2012)

Review Biochemistry & Molecular Biology

A Review of RedOx Cycling of Solid Oxide Fuel Cells Anode

Antonin Faes et al.

MEMBRANES (2012)

Article Chemistry, Physical

Effect of H2O on sulfur poisoning and catalytic activity of Ni-YSZ catalysts

Nandita Lakshminarayanan et al.

APPLIED CATALYSIS A-GENERAL (2011)

Article Chemistry, Physical

Characteristic of (La0.8Sr0.2)(0.98)MnO3 coating on Crofer22APU used as metallic interconnects for solid oxide fuel cell

Seong-Soo Pyo et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)

Article Chemistry, Physical

Redox-induced performance degradation of anode-supported tubular solid oxide fuel cells

Yeon-Hyuk Heo et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)

Article Chemistry, Physical

High-Performance composite cathodes for solid oxide fuel cells

Young Min Park et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)

Article Chemistry, Physical

Sulfur-poisoned Ni-based solid oxide fuel cell anode characterization by varying water content

Ting Shuai Li et al.

JOURNAL OF POWER SOURCES (2011)

Article Chemistry, Physical

Chemical durability of Solid Oxide Fuel Cells: Influence of impurities on long-term performance

Kazunari Sasaki et al.

JOURNAL OF POWER SOURCES (2011)

Article Chemistry, Physical

Simulation of coarsening in three-phase solid oxide fuel cell anodes

Hsun-Yi Chen et al.

JOURNAL OF POWER SOURCES (2011)

Article Instruments & Instrumentation

Application of combined neutron diffraction and impedance spectroscopy for in-situ structure and conductivity studies of La2Mo2O9

Jingjing Liu et al.

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2011)

Review Multidisciplinary Sciences

Lowering the Temperature of Solid Oxide Fuel Cells

Eric D. Wachsman et al.

SCIENCE (2011)

Proceedings Paper Electrochemistry

Current Status of NEDO Project on Durability/Reliability of Solid Oxide Fuel Cell Stacks/Systems

Harumi Yokokawa

SOLID OXIDE FUEL CELLS 12 (SOFC XII) (2011)

Proceedings Paper Electrochemistry

Sulfur Poisoning of SOFCs: Dependence on Operational Parameters

T. Yoshizumi et al.

SOLID OXIDE FUEL CELLS 12 (SOFC XII) (2011)

Article Chemistry, Physical

Performance of SOFC coupled with n-C4H10 autothermal reformer: Carbon deposition and development of anode structure

Gyujong Bae et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)

Article Chemistry, Physical

A novel direct carbon fuel cell by approach of tubular solid oxide fuel cells

Renzhu Liu et al.

JOURNAL OF POWER SOURCES (2010)

Article Chemistry, Physical

Carbon monoxide-fueled solid oxide fuel cell

Michael Homel et al.

JOURNAL OF POWER SOURCES (2010)

Article Chemistry, Physical

Stability of Ni-yttria stabilized zirconia anodes based on Ni-impregnation

Trine Klemenso et al.

JOURNAL OF POWER SOURCES (2010)

Article Chemistry, Physical

High performance solid oxide fuel cell operating on dry gasified coal

Turgut M. Guer et al.

JOURNAL OF POWER SOURCES (2010)

Review Electrochemistry

Cathode materials for solid oxide fuel cells: a review

Chunwen Sun et al.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2010)

Article Electrochemistry

Comparison of LSV/YSZ and LSV/GDC SOFC Anode Performance in Coal Syngas Containing H(2)S

Matthew Cooper et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2010)

Article Electrochemistry

Durability Study of SOFCs Under Cycling Current Load Conditions

A. Hagen et al.

FUEL CELLS (2009)

Article Electrochemistry

Chromium Poisoning of LSM/YSZ and LSCF/CGO Composite Cathodes

J. J. Bentzen et al.

FUEL CELLS (2009)

Article Chemistry, Physical

Oxidation behavior of metallic interconnects for SOFC in coal syngas

Yihong Li et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)

Article Chemistry, Physical

Solid Oxide Fuel Cells damage mechanisms due to Ni-YSZ re-oxidation: Case of the Anode Supported Cell

J. Laurencin et al.

JOURNAL OF POWER SOURCES (2009)

Article Chemistry, Physical

Element interdiffusion at electrolyte-cathode interfaces in ceramic high-temperature fuel cells

S. Uhlenbruck et al.

SOLID STATE IONICS (2009)

Article Electrochemistry

Ni infiltration as a possible solution to the redox problem of SOFC anodes

A. N. Busawon et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2008)

Article Chemistry, Physical

Anomalous oxidation of ferritic interconnects in solid oxide fuel cells

Teruhisa Horita et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2008)

Article Chemistry, Physical

Development of LSCF-GDC composite cathodes for low-temperature solid oxide fuel cells with thin film GDC electrolyte

Yonjun Leng et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2008)

Review Materials Science, Multidisciplinary

Development of lanthanum strontium manganite perovskite cathode materials of solid oxide fuel cells: a review

San Ping Jiang

JOURNAL OF MATERIALS SCIENCE (2008)

Article Chemistry, Physical

Monitoring Ag-Cr interactions in SOFC cathodes using Raman spectroscopy

Harry W. Abernathy et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2008)

Article Chemistry, Physical

Co/LaCrO3 composite coatings for AISI 430 stainless steel solid oxide fuel cell interconnects

Nima Shaigan et al.

JOURNAL OF POWER SOURCES (2008)

Article Chemistry, Physical

Fundamental mechanisms limiting solid oxide fuel cell durability

Harumi Yokokawa et al.

JOURNAL OF POWER SOURCES (2008)

Article Chemistry, Physical

Poisoning of SOFC anodes by various fuel impurities

K. Haga et al.

SOLID STATE IONICS (2008)

Article Chemistry, Physical

Ce0.8Gd0.2O2-δ protecting layers manufactured by physical vapor deposition for IT-SOFC

N. Jordan et al.

SOLID STATE IONICS (2008)

Article Chemistry, Physical

High temperature oxidation/corrosion behavior of metals and alloys under a hydrogen gradient

Zhenguo Yang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2007)

Article Chemistry, Physical

Effect of cathode and electrolyte transport properties on chromium poisoning in solid oxide fuel cells

Jeffrey W. Fergus

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2007)

Article Chemistry, Physical

A model for solid oxide fuel cell (SOFC) stack degradation

Anil V. Virkar

JOURNAL OF POWER SOURCES (2007)

Review Chemistry, Physical

Sulfur-tolerant anode materials for solid oxide fuel cell application

Mingyang Gong et al.

JOURNAL OF POWER SOURCES (2007)

Article Materials Science, Multidisciplinary

Thin film coating technologies of (Ce,Gd)O2-δ interlayers for application in ceramic high-temperature fuel cells

S. Uhlenbruck et al.

THIN SOLID FILMS (2007)

Article Chemistry, Physical

Carbon deposition on Ni/YSZ composites exposed to humidified methane

Hongpeng He et al.

APPLIED CATALYSIS A-GENERAL (2007)

Article Chemistry, Physical

Chromium vaporization of bare and of coated iron-chromium alloys at 1073 K

Hideto Kurokawa et al.

SOLID STATE IONICS (2007)

Article Electrochemistry

Chemical stability of ferritic alloy interconnect for SOFCs

Kei Ogasawara et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2007)

Article Chemistry, Physical

Fracture strength of micro-tubular solid oxide fuel cell anode in redox cycling experiments

Jakub Pusz et al.

JOURNAL OF POWER SOURCES (2007)

Article Chemistry, Physical

Thermodynamic considerations on Cr poisoning in SOFC cathodes

H. Yokokawa et al.

SOLID STATE IONICS (2006)

Article Chemistry, Physical

Material transport and degradation behavior of SOFC interconnects

Natsuko Sakai et al.

SOLID STATE IONICS (2006)

Article Chemistry, Physical

High-temperature Raman spectroscopy of solid oxide fuel cell materials and processes

Michael B. Pomfret et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2006)

Article Chemistry, Physical

Oxidation kinetics and phase evolution of a Fe-16Cr alloy in simulated SOFC cathode atmosphere

Pu Jian et al.

JOURNAL OF POWER SOURCES (2006)

Article Chemistry, Physical

Three-dimensional reconstruction of a solid-oxide fuel-cell anode

James R. Wilson et al.

NATURE MATERIALS (2006)

Article Chemistry, Physical

Improvement in SOFC anode performance by finely-structured Ni/YSZ cermet prepared via heterocoagulation

Y Sunagawa et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2006)

Article Electrochemistry

Degradation mechanisms of La-Sr-Co-Fe-O3SOFC cathodes

S. P. Simner et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2006)

Article Electrochemistry

In situ observations of microstructural changes in SOFC anodes during redox cycling

T. Klemenso et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2006)

Article Electrochemistry

Interaction between Fe-Cr metallic interconnect and (La, Sr) MnO3/YSZ composite cathode of solid oxide fuel cells

S. P. Jiang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)

Article Electrochemistry

Degradation of anode supported SOFCs as a function of temperature and current load

A Hagen et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)

Article Chemistry, Physical

Methane oxidation over M-8YSZ and M-CeO2/8YSZ (M = Ni, Cu, Co, Ag) catalysts

M Itome et al.

CATALYSIS LETTERS (2006)

Article Electrochemistry

Highly sulfur tolerant Cu-ceria anodes for SOFCs

HP He et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2005)

Article Electrochemistry

The mechanism behind redox instability of anodes in high-temperature SOFCs

T Klemenso et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)

Article Electrochemistry

Oxidation behavior of ferritic stainless steels under SOFC interconnect exposure conditions

ZG Yang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)

Review Chemistry, Physical

Solid oxide fuel cell technology-features and applications

NQ Minh

SOLID STATE IONICS (2004)

Article Electrochemistry

Anomalous corrosion behavior of stainless steels under SOFC interconnect exposure conditions

ZG Yang et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2003)

Article Materials Science, Multidisciplinary

Sintering behavior of Ni/Y2O3-ZrO2 cermet electrodes of solid oxide fuel cells

SP Jiang

JOURNAL OF MATERIALS SCIENCE (2003)

Article Electrochemistry

Equilibria in fuel cell gases - II. The C-H-O ternary diagrams

K Sasaki et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2003)

Article Chemistry, Physical

Stability of Fe-Cr alloy interconnects under CH4-H2O atmosphere for SOFCs

T Horita et al.

JOURNAL OF POWER SOURCES (2003)

Review Nanoscience & Nanotechnology

Development of interconnect materials for solid oxide fuel cells

WZ Zhu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)

Letter Chemistry, Physical

A redox-stable efficient anode for solid-oxide fuel cells

SW Tao et al.

NATURE MATERIALS (2003)

Article Electrochemistry

Evaluation of Fe-Cr alloys as interconnects for reduced operation temperature SOFCs

T Horita et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2003)

Article Chemistry, Physical

Study on steam reforming of CH4 and C2 hydrocarbons and carbon deposition on Ni-YSZ cermets

T Takeguchi et al.

JOURNAL OF POWER SOURCES (2002)

Article Electrochemistry

Fabrication of high-performance NiOY2O3-ZrO2 cermet anodes of solid oxide fuel cells by ion impregnation

SP Jiang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2002)

Article Chemistry, Physical

Ni-YSZ cermet anodes prepared by citrate/nitrate combustion synthesis

M Marinsek et al.

JOURNAL OF POWER SOURCES (2002)

Article Chemistry, Physical

Application of Fe-16Cr ferritic alloy to interconnector for a solid oxide fuel cell

T Brylewski et al.

SOLID STATE IONICS (2001)

Article Chemistry, Physical

Advances in solid oxide fuel cell technology

SC Singhal

SOLID STATE IONICS (2000)

Article Multidisciplinary Sciences

Direct oxidation of hydrocarbons in a solid-oxide fuel cell

SD Park et al.

NATURE (2000)