☆ 4.7 Article

Thermal and environmental assessment of Botryococcus braunii green biodiesel with nanoparticles using energy-exergy-emission-sustainability (3ES) analysis in a diesel engine

SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS (2023)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

Energy, exergy, economic, environmental, and sustainability assessments of the CFM56-3 series turbofan engine used in the aviation sector

Peter Korba et al.

Summary: This study conducts aviation, energy, exergy, environmental, exergoeconomic, and exergoenvironmental analyses on a CFM56-3 series high by-pass turbofan engine fueled with Jet-A1 fuel. The specific fuel consumption and specific thrust of the engine are determined to be 0.01098 kg/kN.s and 0.3178 kN/kg/s. The engine's energy efficiency is calculated as 35.37%, while the waste energy ratio is obtained as 64.63%. The exergy efficiency, waste exergy rate, and fuel exergy waste ratio are forecasted as 33.32%, 33175.03 kW, and 66.68%, respectively. The environmental effect factor and ecological effect factor are computed as 2.001 and 3.001, while the ecological objective function and its index are considered to be -16597.22 kW and -1.001, respectively.

ENERGY (2023)

Add to Collection

Article Agricultural Engineering

Impact of fuel injection pressure on the common rail direct fuel injection engine powered by microalgae, kapok oil, and soybean biodiesel blend

Paras Gupta et al.

Summary: This paper investigates the viability of microalgae as a replacement feedstock for compression ignition engines. The characteristics of various diesel fuel alternatives and their blends with diesel were studied. The findings show that the use of MAME20D80 and KA20D80 in diesel engines is viable.

INDUSTRIAL CROPS AND PRODUCTS (2023)

Add to Collection

Article Environmental Sciences

Recovery of agricultural waste biomass: A path for circular bioeconomy

Pardeep Kumar Sadh et al.

Summary: Circular bio-economy is an important approach to address global issues caused by environmental pollution. It involves the generation of bioenergy and biomaterials to substitute petroleum-based materials, contributing to a cleaner and low-carbon environment. Agricultural bio-wastes, abundant in starch, cellulose, protein, hemicellulose, and lipids, can be converted into value-added products like biofuel, enzymes, antibiotics, ethanol, and single cell protein, enhancing the overall performance of waste management in the supply chain.

SCIENCE OF THE TOTAL ENVIRONMENT (2023)

Add to Collection

Article Thermodynamics

Exergy, exergoeconomic, and sustainability analyses of a diesel engine using biodiesel fuel blends containing nanoparticles

Battal Dogan et al.

Summary: This paper investigated the influence of titanium dioxide (TiO2) and silver oxide (Ag2O) nanoparticles additives on biodiesel fuel obtained from cottonseed oil. The fuel blends formed by nanoparticles with biodiesel fuel were evaluated in terms of performance and emissions. The results showed that adding nanoparticles to biodiesel fuel increased thermal efficiency and exergy efficiency, and decreased total exergy losses in fuel blends.

ENERGY (2023)

Add to Collection

Article Energy & Fuels

Modifying diesel fuel with nanoparticles of zinc oxide to investigate its influences on engine behaviors

Upendra Rajak et al.

Summary: In this study, experimental and numerical methods were used to investigate the impact of diesel fuel blended with three different concentrations (0.025%, 0.05%, and 0.1%) of zinc oxide (ZnO) nanoparticles on the combustion, injection, performance, and emission characteristics of a diesel engine operating at various speeds. The results demonstrate that adding 0.1% ZnO nanoparticles to the fuel improves engine efficiency and combustion yield by increasing brake thermal efficiency (BTE), reducing specific fuel consumption (SFC), lowering exhaust gas temperature, decreasing NOx emissions, and increasing cylinder pressure. Additionally, the nanoparticle-added fuel also leads to a reduction in CO2 emissions compared to a diesel engine running at 2500 rpm.

FUEL (2023)

Add to Collection

Article Energy & Fuels

Sustainability analysis of spirulina biodiesel and their blends on a diesel engine with energy, exergy and emission (3E's) parameters

Aman Singh Rajpoot et al.

Summary: The present study analyzes the sustainability of spirulina microalgae biodiesel and evaluates its energy-exergy-emission (3E) performance in a diesel engine. The results indicate that spirulina biodiesel has similar sustainability index to diesel and shows potential as an alternative fuel.

FUEL (2023)

Add to Collection

Article Thermodynamics

A novel comprehensive energy, exergy and sustainability analysis of a diesel engine powered by binary blends of juliflora biodiesel and nanoparticles

Aman Singh Rajpoot et al.

Summary: This study demonstrates that the addition of metal-based nanoparticles into biodiesel can improve the performance of diesel engines. Among the nanoparticles tested, titanium dioxide (TiO2) showed superior performance. The analysis of energy, exergy, and sustainability provides valuable insights into the engine's operation and its impact on the system.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2023)

Add to Collection

Article Environmental Sciences

Comparative combustion, emission, and performance analysis of a diesel engine using carbon nanotube (CNT) blended with three different generations of biodiesel

Aman Singh Rajpoot et al.

Summary: This study evaluates the impact of mixing carbon nanotubes (CNT) with three different generations of biodiesel in a diesel engine. It is found that the biodiesel containing CNT nanoparticles can enhance engine pressure, heat release rate, and thermal efficiency, while reducing fuel consumption, smoke opacity, particulate matter, and carbon dioxide emissions. However, an increase in nitrogen oxide (NOx) emissions is also observed with the addition of CNT at full load.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2023)

Add to Collection

Article Chemistry, Analytical

Nanoparticles as fuel additive for improving performance and reducing exhaust emissions of internal combustion engines

Saddam Khan et al.

Summary: Nanoparticles as fuel additives have shown exceptional performance in engineering applications, improving engine performance and reducing exhaust emissions. The addition of fuel additives enhances the thermo-physical properties, combustion characteristics, and enables the blending of biodiesel with diesel. Limited studies have been conducted on the health risk issues associated with the addition of fuel additives.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL ANALYTICAL CHEMISTRY (2022)

Add to Collection

Article Energy & Fuels

Investigation of performance, combustion, and emission characteristics of diesel engine equipped with exhaust gas recirculation using ceria and zirconia nanoparticles-blended rice bran biodiesel

Rajendran Selvabharathi et al.

Summary: The study investigates the performance improvement and emission reduction of an engine using biofuels blended with nanoparticles. The experimental results show that the fuel sample B30 + 25ZrO(2) + 25CeO(2) + 15%EGR displays better performance compared to other samples, with increased brake thermal efficiency and reduced brake specific fuel consumption. Furthermore, this sample also decreases the emission of CO, HC, and NOx.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2022)

Add to Collection

Article Chemistry, Applied

Understanding the role of nanoparticle size on energy, exergy, thermoeconomic, exergoeconomic, and sustainability analyses of an IC engine: A thermodynamic approach

Umit Agbulut

Summary: This study shows that nanoparticle size plays a significant role in CI engine performance. Smaller particle sizes lead to improved fuel properties and efficiency.

FUEL PROCESSING TECHNOLOGY (2022)

Add to Collection

Article Environmental Sciences

PM emissions-assessment of combustion energy transfer with Schizochytrium sp. algal biodiesel and blends in IC engine

Shengbo Ge et al.

Summary: The study demonstrates that using Schizochytrium microalgae bio-oil as biofuel for diesel engines shows improved performance in terms of fuel efficiency and reduced harmful gas emissions, except for NOX which is slightly higher than diesel. Overall, the differences between them are negligible.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

Add to Collection

Article Green & Sustainable Science & Technology

High-efficiency production of biomass and biofuel under two-stage cultivation of a stable microalga Botryococcus braunii mutant generated by ethyl methanesulfonate-induced mutation

Theera Thurakit et al.

Summary: In this study, mutagenesis was used to improve the biomass, hydrocarbon, and lipid productivity of the microalga Botryococcus braunii. The mutant E1.0H15 showed the highest productivity and after 24 months of maintenance, the high biofuel productivity remained unchanged. Two-stage cultivation was also implemented to further boost the biofuel productivity. The resulting lipid-derived biodiesel exhibited good fuel properties according to international standards.

RENEWABLE ENERGY (2022)

Add to Collection

Article Energy & Fuels

Exergetic, exergoeconomic, and sustainability analyses of diesel-biodiesel fuel blends including synthesized graphene oxide nanoparticles

Cuneyt Uysal et al.

Summary: Graphene oxide nanoparticles were synthesized and added to a diesel-biodiesel blend. The fuel with 100 ppm graphene oxide nanoparticles showed the highest exergy efficiency and sustainability index, and the second-cheapest specific exergy cost of crankshaft work.

FUEL (2022)

Add to Collection

Article Chemistry, Physical

Numerical and experimental investigation of hydrogen enrichment in a dual-fueled CI engine: A detailed combustion, performance, and emission discussion

Upendra Rajak et al.

Summary: This study simulated a compression ignition engine and compared the efficiency and emissions of hydrogen-diesel blends, hydrogen-diethyl ether blends, hydrogen-n-butanol blends, and base diesel fuel. The results showed that adding hydrogen to diesel can improve fuel efficiency and reduce harmful pollutant emissions in the exhaust.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Add to Collection

Article Thermodynamics

Energy, exergy and exergoenvironmental analyses on gas-diesel fuel marine engine used for trigeneration system

Eduardo J. C. Cavalcanti

Summary: This study evaluated the performance of a trigeneration system driven by a dual fuel marine engine through exergy and exergoenvironmental analyses. It was found that the use of gas diesel fuel reduced energy and exergy efficiencies by 87% compared to full diesel mode, but improved environmental performance by reducing pollutant formation. Further recommendations were proposed for controlling pollutant emissions and enhancing exergoenvironmental performance without significant modifications to the engine.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Effect of Sr@ZnO nanoparticles and Ricinus communis biodiesel-diesel fuel blends on modified CRDI diesel engine characteristics

Manzoore Elahi M. Soudagar et al.

Summary: The study evaluated the performance and emission characteristics of a modified CRDI diesel engine fueled by RCME20 biodiesel blended with Sr@ZnO nanoparticles. Results indicated that under certain conditions, the engine performance was enhanced and emissions were reduced compared to RCME20 fuel.

ENERGY (2021)

Add to Collection

Article Thermodynamics

Exergetic and exergoeconomic analyses of a CI engine fueled with diesel-biodiesel blends containing various metal-oxide nanoparticles

Mustafa Karagoz et al.

Summary: In this study, comprehensive exergetic and exergoeconomic analyses were conducted on a single-cylinder, four-stroke diesel engine. Different nanofuels were tested at varying engine loads, with D90B10Al(2)O(3) showing the highest exergy efficiency and sustainability index values. Al2O3-doped nanofuel emerged as the best test fuel in terms of exergy, exergoeconomics, and sustainability analyzes.

ENERGY (2021)

Add to Collection

Article Energy & Fuels

Performance, combustion and emission analysis of castor oil biodiesel blends enriched with nanoadditives and hydrogen fuel using CI engine

Changlei Xia et al.

Summary: The experimental study found that adding hydrogen can improve the combustion performance of compression ignition engines, while increasing the concentration of nanoparticles significantly improves brake thermal efficiency and reduces emissions. However, a slight decrease in NOx was observed under 75% engine load condition without the addition of nanoparticles.

FUEL (2021)

Add to Collection

Article Energy & Fuels

Effect of CuO nanoparticles concentration on the performance and emission characteristics of the diesel engine running on jojoba (Simmondsia Chinensis) biodiesel

Pankaj Mohan Rastogi et al.

Summary: This study investigates the effects of CuO nanoparticles on the performance, emissions, and combustion characteristics of a diesel engine running on jojoba biodiesel blend (JB20). The results show that the addition of CuO nanoparticles to JB20 fuel can increase fuel thermal efficiency and reduce emissions.

FUEL (2021)

Add to Collection

Article Energy & Fuels

Engine performance, emission, and sustainability analysis with diesel fuel-based Shorea robusta methyl ester biodiesel blends

Ranjeet Kumar Rai et al.

Summary: The study found that increasing engine load, compression ratio, and the percentage of SRME biodiesel blend can enhance the efficiency and sustainability parameters of an engine, although it also leads to higher NO, UHC, and CO emissions. Increasing the percentage of SRME blend can increase NO emissions while reducing UHC and CO emissions.

FUEL (2021)

Add to Collection

Article Thermodynamics

The combustion, performance and emissions investigation of a dual-fuel diesel engine using silicon dioxide nanoparticle additives to methanol

Jiangjun Wei et al.

Summary: The study showed that adding SiO2 nanoparticles to methanol could increase the peak pressure and peak heat release rate of a diesel engine, improve fuel efficiency and reduce emissions of CO, HC, NOx, and smoke.

ENERGY (2021)

Add to Collection

Article Energy & Fuels

Exergy loss analysis on diesel methanol dual fuel engine under different operating parameters

Baodong Ma et al.

APPLIED ENERGY (2020)

Add to Collection

Article Energy & Fuels

Experimental, numerical and exergy analyses of a dual fuel combustion engine fuelled with syngas and biodiesel/diesel blends

M. Krishnamoorthi et al.

APPLIED ENERGY (2020)

Add to Collection

Article Energy & Fuels

An experimental study on energy-exergy analysis and sustainability index in a diesel engine with direct injection diesel-biodiesel-butanol fuel blends

Selcuk Sarikoc et al.

FUEL (2020)

Add to Collection

Article Energy & Fuels

Enhancement in Combustion, Performance, and Emission Characteristics of a Diesel Engine Fueled with Ce-ZnO Nanoparticle Additive Added to Soybean Biodiesel Blends

Fayaz Hussain et al.

ENERGIES (2020)

Add to Collection

Article Energy & Fuels

A comprehensive parametric, energy and exergy analysis for oxygenated biofuels based dual-fuel combustion in an automotive light duty diesel engine

Murugan Rangasamy et al.

FUEL (2020)

Add to Collection

Article Energy & Fuels

The examination of a compression-ignition engine powered by peanut oil biodiesel and diesel fuel in terms of energetic and exergetic performance parameters

Murat Kadir Yesilyurt

FUEL (2020)

Add to Collection

Article Energy & Fuels

An experimental investigation on engine characteristics, cost and energy analysis of CI engine fuelled with Roselle, Karanja biodiesel and its blends

Pankaj Shrivastava et al.

FUEL (2020)

Add to Collection

Review Thermodynamics

Exergy analysis in combined heat and power systems: A review

Omid Mahian et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

Add to Collection

Article Energy & Fuels

Performance, combustion and emission characteristics of a diesel engine fuelled with Schizochytrium micro-algae biodiesel and its blends

B. Rajendra Prasad Reddy et al.

INTERNATIONAL JOURNAL OF AMBIENT ENERGY (2020)

Add to Collection

Article Environmental Sciences

A comprehensive study on emission and performance characteristics of a diesel engine fueled with nanoparticle-blended biodiesel

Yuvarajan Devarajan et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2019)

Add to Collection

Review Thermodynamics

A review for key challenges of the development of biodiesel industry

Intan Shafinaz Abd Manaf et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Add to Collection

Article Thermodynamics

Effects of aqueous carbon nanoparticles as a novel nanoadditive in water-emulsified diesel/biodiesel blends on performance and emissions parameters of a diesel engine

Homa Hosseinzadeh-Bandbafha et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Add to Collection

Article Thermodynamics

Exergy analysis of a diesel engine with waste cooking biodiesel and triacetin

Chukwuka Odibi et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Add to Collection

Review Energy & Fuels

A review of global current scenario of biodiesel adoption and combustion in vehicular diesel engines

Oyetola Ogunkunle et al.

ENERGY REPORTS (2019)

Add to Collection

Article Thermodynamics

Assessment of diesel engine performance using spirulina microalgae biodiesel

Upendra Rajak et al.

ENERGY (2019)

Add to Collection

Article Energy & Fuels

Environment effect of La2O3 nano-additives on microalgae-biodiesel fueled CRDI engine with conventional diesel

S. Karthikeyan et al.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2018)

Add to Collection

Review Energy & Fuels

A review of production, properties and advantages of biodiesel

Vijay Kumar Mishra et al.

BIOFUELS-UK (2018)

Add to Collection

Article Thermodynamics

The effect of nano-additives in diesel-biodiesel fuel blends: A comprehensive review on stability, engine performance and emission characteristics

Manzoore Elahi M. Soudagar et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

Add to Collection

Article Thermodynamics

A comparative exergetic performance and emission analysis of pilot diesel dual-fuel engine with biogas, CNG and hydrogen as main fuels

Saket Verma et al.

ENERGY CONVERSION AND MANAGEMENT (2017)

Add to Collection

Article Energy & Fuels

Investigation on the emission quality characteristics of a diesel engine fueled with algae biofuel with nano additives

S. Karthikeyan et al.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2017)

Add to Collection

Article Energy & Fuels

Experimental assessment of a diesel engine fueled with diesel-biodiesel-1-pentanol blends

Nadir Yilmaz et al.

FUEL (2017)

Add to Collection

Article Thermodynamics

Effect of fuel oxygen on the energetic and exergetic efficiency of a compression ignition engine fuelled separately with palm and karanja biodiesels

Jibanananda Jena et al.

ENERGY (2014)

Add to Collection

© Peeref 2019-2024. All rights reserved.