☆ 4.7 Article

Boron-induced microstructural manipulation of titanium and titanium alloys in additive manufacturing

VIRTUAL AND PHYSICAL PROTOTYPING (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Effects of Boron on Microstructure and Mechanical Properties of High-Nb TiAl Alloy Fabricated via Laser Melting Deposition

Junmei Huo et al.

Summary: The high-Nb TiAl alloy was modified by adding boron particles, resulting in a crack-free alloy with improved room-temperature plasticity. The addition of boron prevented the rapid growth of beta crystals and refined the lamellar structure, resulting in improved mechanical properties. The TiB particles also hindered dislocation movement and increased the plasticity of the alloy.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2023)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Mixed Grain Structure and Mechanical Property of Ti-6Al-4V-0.5BN (wt%) Alloy Fabricated by Selective Laser Melting

Liqing Wang et al.

Summary: A novel Ti-6Al-4V-0.5BN alloy fabricated using selective laser melting exhibited a mixed grain structure containing band distributed columnar and equiaxed prior-beta-Ti grains. The microstructure within the grains and the compressive properties were characterized and discussed. The addition of BN resulted in a multi-scaled microstructure and contributed to high compressive yield strength.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and Mechanical Properties of LaB6/Ti-6Al-4V Composites Fabricated by Selective Laser Melting

Dongdong He et al.

Summary: TiB + La2O3/Ti-6Al-4V composites were prepared using selective laser melting technology, and the effect of LaB6 content on the composite samples’ quality, microstructure evolution, and mechanical properties was investigated. The results showed that with increasing LaB6 content, the sample’s relative density decreased, TiB precipitates changed their structure, and the dislocations accumulated around the reinforcements, leading to enhanced tensile strength. Compared to pure Ti-6Al-4V sample, the addition of 3 wt% LaB6 significantly increased hardness, tensile strength, and reduced wear volume. This study demonstrated the potential of using LaB6 to improve the mechanical performance of titanium alloys in additive manufacturing.

METALS (2023)

Add to Collection

Article Chemistry, Physical

Self-Driving Laboratory for Polymer Electronics?

Aikaterini Vriza et al.

Summary: Polymer electronics have made unique advances in various fields, but their development period is long. The use of self-driving laboratories can accelerate the research and discovery of materials.

CHEMISTRY OF MATERIALS (2023)

Add to Collection

Article Materials Science, Ceramics

Wire arc additive manufacturing of network microstructure (TiB+TiC)/Ti6Al4V composites using flux-cored wires

Zhuorui Wang et al.

Summary: In this study, a Wire Arc Additive Manufacturing (WAAM) process using flux-cored wire was developed to fabricate Ti6Al4V matrix composites reinforced with TiB and TiC particles. The introduction of reinforcement resulted in the formation of a refined net-basket-dominated (alpha+beta)-Ti matrix and a stable network microstructure. The microhardness of the samples increased with increasing reinforcement fraction, but the wear resistance decreased in the 10 wt% sample due to the reduced ductility.

CERAMICS INTERNATIONAL (2023)

Add to Collection

Article Engineering, Mechanical

Fatigue behaviour of L-DED processed Ti-6Al-4V with microstructures refined by trace boron addition

Kai Zhang et al.

Summary: This study investigates the high-cycle fatigue life and crack propagation rates of laser direct energy deposited Ti-6Al-4V with a trace boron addition. The refined microstructure increases crack initiation resistance and significantly improves high-cycle fatigue life. However, the crack propagation resistance, estimated from spectrum loading, is reduced due to the refined prior-beta grains and TiB particles.

INTERNATIONAL JOURNAL OF FATIGUE (2023)

Add to Collection

Review Computer Science, Artificial Intelligence

Process monitoring and machine learning for defect detection in laser-based metal additive manufacturing

T. Herzog et al.

Summary: Metal Additive Manufacturing (AM) has evolved from a rapid prototyping method to a viable manufacturing tool, attracting high-value industries for direct component production. However, the highly dynamic nature of the process often leads to defect formation and lack of control. This review explores the application of Machine Learning (ML) approaches and in-situ monitoring technologies for defect detection and discusses their potential for process control implementation. It also critically evaluates trends in data structures, ML algorithms, and sensing technologies in laser metal AM monitoring tasks, providing recommendations for further research.

JOURNAL OF INTELLIGENT MANUFACTURING (2023)

Add to Collection

Article Materials Science, Multidisciplinary

High-temperature tensile and creep properties of TiB-reinforced Ti6Al4V composite fabricated by laser powder bed fusion

Zhiguang Zhou et al.

Summary: Titanium matrix composites fabricated by laser powder bed fusion (LPBF) have shown superior high-temperature tensile strength and creep resistance compared to pure Ti6Al4V alloy. The microstructure of the Ti6Al4V-TiB composite plays a crucial role in determining its high-temperature performance. Specifically, the presence of TiB whiskers effectively pins dislocations and enhances creep resistance, while the increased alpha p/beta t phase interface contributes to improved creep resistance in the bimodal Ti6Al4V-TiB composite.

MATERIALS CHARACTERIZATION (2023)

Add to Collection

Review Chemistry, Multidisciplinary

Artificial Intelligence and Advanced Materials

Cefe Lopez

Summary: Artificial intelligence is growing stronger, and materials science can benefit from it by using machine learning techniques to design and optimize new materials, systems, and processes. Understanding how machine learning can enhance the conception of advanced materials is crucial for future materials scientists. This review provides knowledge of computation and machine learning methods, and explores the impact of these techniques on the development of new advanced materials.

ADVANCED MATERIALS (2023)

Add to Collection

Article Engineering, Manufacturing

Predicting the chemical homogeneity in laser powder bed fusion (LPBF) of mixed powders after remelting

Huikai Li et al.

Summary: An advantage of LPBF is the ability to create complex components easily. Most studies focus on commercially available powders, neglecting new alloy design. Mixing powders with different chemistries is an effective way to access new alloy compositions. This study extends a previously published model to describe the chemical distribution of LPBF material from mixed powders, incorporating remelting process and comparing it with experiments.

ADDITIVE MANUFACTURING (2023)

Add to Collection

Article Chemistry, Physical

Additive manufacturing of in-situ strengthened dual-phase AlCoCuFeNi high-entropy alloy by selective electron beam melting

Mina Zhang et al.

Summary: The application scope and market demand for additive-manufactured high-entropy alloys (AM HEAs) have broadened of late. A dual-phase AlCoCuFeNi HEA was fabricated by selective electron beam melting (SEBM) with superior compressive strength and ductility. Further improvements were achieved using selective electron beam remelting (SEB-RM) during SEBM, resulting in better compressive properties.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and properties of TiB2-reinforced Ti-35Nb-7Zr-5Ta processed by laser-powder bed fusion

Rodolfo Lisboa Batalha et al.

Summary: The TNZT alloy reinforced with TiB2 shows refined microstructure, increased compressive strength (495 MPa), and maintained ductility, making it a promising choice for manufacturing complex components for biomedical applications. Compared to the unreinforced TNZT, the addition of a small fraction of TiB2 results in higher compressive strength and does not sacrifice ductility.

JOURNAL OF MATERIALS RESEARCH (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Issues in Metal Matrix Composites Fabricated by Laser Powder Bed Fusion Technique: A Review

Ubong Essien et al.

Summary: The success of laser powder bed fusion (L-PBF) technique in fabricating metal matrix composites (MMCs) has paved the way for advanced materials development. However, challenges remain in producing fully dense MMCs from metal and ceramic combinations due to complex phenomena and defects formation. This article discusses the issues related to defect generation in particulate-reinforced MMCs and presents an overview of additive manufacturing (AM) defects influenced by reinforcement addition and mitigation strategies. The review aims to broaden the understanding of L-PBF fabrication defects in MMCs and provide insight into tailoring feedstock materials for high-quality AM fabrication of MMCs.

ADVANCED ENGINEERING MATERIALS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

TiB reinforced lattice structures produced by laser powder bed fusion with high elastic admissible strain

Joseph A. Otte et al.

Summary: We developed a TiB reinforced titanium matrix composite with improved strength and wear resistance for bone tissue implant applications using laser powder bed fusion. The post-process heat treatment enhanced the properties of the composite, resulting in a fine-grained microstructure.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Selective laser melting of Ti6Al4V-B4C-BN in situ reactive composites

Kellen D. Traxel et al.

Summary: The desire for higher application temperatures and complex geometries for metallic materials has driven significant development in additive manufacturing (AM) of metal-ceramic composites. However, there is limited understanding of the process-microstructure-properties relationships for these materials and processing strategies. In this study, the processing window and high-temperature oxidation performance of an in situ reactive, oxidation-resistant titanium metal-matrix composite reinforced with boron nitride (BN) and boron carbide (B4C) were investigated via selective laser melting (SLM) to understand the effects of processing parameters on the in situ reactive characteristics and their influence on build reliability and high-temperature oxidation performance. Process optimization resulted in composites with high relative density and improved high-temperature oxidation resistance compared to the base material.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Engineering, Manufacturing

Research and application of machine learning for additive manufacturing

Jian Qin et al.

Summary: Additive manufacturing (AM) has the potential to revolutionize production with its unique paradigm, offering mass customization, flexible production, on-demand manufacturing, and decentralized production. However, challenges arise from the complexity of manufacturing systems and the need for complex and high-quality products. Machine learning (ML) technologies play a critical role in addressing these challenges by enabling effective quality control, process optimization, complex system modeling, and energy management. This paper presents a systematic literature review and keyword co-occurrence and cluster analysis to summarize the state-of-the-art research on ML for AM, and discusses the challenges and opportunities of ML in AM.

ADDITIVE MANUFACTURING (2022)

Add to Collection

Article Nanoscience & Nanotechnology

From crack-prone to crack-free: Unravelling the roles of LaB6 in a ß-solidifying TiAl alloy fabricated with laser additive manufacturing

Danni Huang et al.

Summary: This study investigates the synergistic roles of La and B in grain refinement and crack elimination in a LAMed ss-solidifying TiAl alloy with LaB6 addition. Results show that La2O3 and TiB in-situ formed via reaction between the ss-solidifying TiAl and the added LaB6 nanoparticles. The optimal addition level of 0.5 wt% LaB6 can achieve balanced mechanical properties at both room temperature and 800 degrees C. Excessive LaB6 addition leads to agglomeration of in-situ formed precipitates, reducing density and deteriorating mechanical properties.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection

Article Materials Science, Multidisciplinary

High strength and ductility of titanium matrix composites by nanoscale design in selective laser melting

Joseph A. Otte et al.

Summary: This study demonstrates the successful production of high-performance titanium matrix composites (TMCs) using selective laser melting (SLM) and nanosized BN powder additives. The addition of nanosized BN promotes the formation of TiB nanowhiskers and grain refinement, resulting in TMCs with high tensile yield strength and retained ductility.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Engineering, Manufacturing

The Trajectory of Additively Manufactured Titanium Alloys with Superior Mechanical Properties and Engineered Microstructures

Saeid Alipour et al.

Additive Manufacturing (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and properties of TiB2-reinforced Ti-35Nb-7Zr 5Ta processed by laser-powder bed fusion

Rodolfo Lisboa Batalha et al.

Summary: The Ti-35Nb-7Zr-5Ta alloy reinforced with TiB2 synthesized by L-PBF shows improved compressive strength without sacrificing ductility or altering Young's modulus by reducing grain size and improving the microstructure.

JOURNAL OF MATERIALS RESEARCH (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Multiscale Architecture and Superior High-Temperature Performance of Discontinuously Reinforced Titanium Matrix Composites

Lujun Huang et al.

Summary: DRTMCs with multiscale architecture design can improve material strength, creep, and oxidation resistance, exhibiting superior performance under high temperature conditions.

ADVANCED MATERIALS (2021)

Add to Collection

Article Automation & Control Systems

Toward understanding the effect of remelting on the additively manufactured NiTi

Parisa Bayati et al.

Summary: By modifying the selective laser melting (SLM) approach for NiTi, a method called "remelting" was proposed to reduce internal micropores/voids and improve surface roughness; proper combinations of remelting process parameters can lead to fabricating NiTi components with increased density, fewer defects, and smoother surfaces, improving fatigue life and functionality of the parts.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

Add to Collection

Article Engineering, Multidisciplinary

Microstructure evolution and mechanical properties of in-situ Ti6Al4V-TiB composites manufactured by selective laser melting

Zhiguang Zhou et al.

Summary: In situ TiB reinforced titanium matrix composites were fabricated via selective laser melting, with optimized processing to achieve crack-free and fully dense composites. The distribution of TiB reinforcement in the composites was mainly in the form of whisker clusters, showing different distributions in TMC1 and TMC2. The improvement in mechanical properties of the composites was attributed to Hall-Petch strengthening and load-bearing transformation strengthening.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Review Green & Sustainable Science & Technology

Directed Energy Deposition (DED) Process: State of the Art

Dong-Gyu Ahn

Summary: DED processes in metal additive manufacturing technologies allow for the direct fabrication of metallic products with a three-dimensional shape from computer aided design data. These processes can create arbitrary shapes on various substrates and easily fabricate heterogeneous materials with desired properties and characteristics.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Designing high-temperature oxidation-resistant titanium matrix composites via directed energy deposition-based additive manufacturing

Kellen D. Traxel et al.

Summary: Through adjusting input processing parameters, a oxidation-resistant titanium matrix composite with reinforced microstructure composed of borides, carbides, and nitrides was successfully developed, showing improved hardness and oxidation resistance compared to commercially pure titanium.

MATERIALS & DESIGN (2021)

Add to Collection

Article Engineering, Manufacturing

Nanoparticle-mediated ultra grain refinement and reinforcement in additively manufactured titanium alloys

Qi Chao et al.

Summary: An innovative approach utilizing boron nitride nanotube (BNNT) decorated powders for microstructure refinement of an additively manufactured Ti-6Al-4V alloy resulted in unprecedented grain refinement and over 50% strength enhancement. This mechanism of nanoparticle-mediated nucleation enables a unique texture-weakened structure comprising fine equiaxed grains, creating a pathway for screening effective grain refiners in titanium and other alloy systems.

ADDITIVE MANUFACTURING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Ti6Al7Nb-based TiB-reinforced composites by selective laser melting

N. Singh et al.

Summary: Ti6Al7Nb/TiB composite processed by selective laser melting (SLM) exhibit improved mechanical properties and better corrosion resistance compared to Ti6Al4V alloy, indicating its potential as a suitable replacement for bio-implants.

JOURNAL OF MATERIALS RESEARCH (2021)

Add to Collection

Review Engineering, Manufacturing

Perspectives of using machine learning in laser powder bed fusion for metal additive manufacturing

S. L. Sing et al.

Summary: The adoption of laser powder bed fusion (L-PBF) for metals by the industry has been limited due to inconsistency in parts. Machine learning (ML) has the potential to overcome this obstacle by utilizing datasets obtained at various stages of the process chain, leading to better quality control.

VIRTUAL AND PHYSICAL PROTOTYPING (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

A study on the effect of substrate heating and cooling on bead geometry in wire arc additive manufacturing and its correlation with cooling rate

Srinath Gudur et al.

Summary: This study investigates the effect of process parameters, substrate heating and cooling on bead geometry during wire arc additive manufacturing of Inconel 625 on EN 8 steel. It was found that cooling rate increased with travel speed and decreased with energy input, while bead geometry saturated with an increase in current. Cooling rates effectively indicated saturation limits, providing valuable insights for process monitoring and control.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Revealing the Mechanisms of Grain Nucleation and Formation During Additive Manufacturing

Michael Bermingham et al.

JOM (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Cost-affordable, high-performance Ti-TiB composite for selective laser melting additive manufacturing

Yangping Dong et al.

JOURNAL OF MATERIALS RESEARCH (2020)

Add to Collection

Article Engineering, Manufacturing

Influence of in situ ceramic reinforcement towards tailoring titanium matrix composites using laser-based additive manufacturing

Kellen D. Traxel et al.

ADDITIVE MANUFACTURING (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Laser Metal Deposition of Ti6Al4V-A Brief Review

Chongliang Zhong et al.

APPLIED SCIENCES-BASEL (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Selective Laser Melting of In Situ TiB/Ti6Al4V Composites: Formability, Microstructure Evolution and Mechanical Performance

Yue Su et al.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2020)

Add to Collection

Article Engineering, Manufacturing

Investigation of process by-products during the Selective Laser Melting of Ti6AL4V powder

Shane Keaveney et al.

ADDITIVE MANUFACTURING (2020)

Add to Collection

Review Engineering, Manufacturing

Laser powder bed fusion for metal additive manufacturing: perspectives on recent developments

S. L. Sing et al.

VIRTUAL AND PHYSICAL PROTOTYPING (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Grain Refinement of Alloys in Fusion-Based Additive Manufacturing Processes

Duyao Zhang et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Boron modified titanium alloys

Gaurav Singh et al.

PROGRESS IN MATERIALS SCIENCE (2020)

Add to Collection

Article Engineering, Manufacturing

Machine learning in additive manufacturing: State-of-the-art and perspectives

C. Wang et al.

ADDITIVE MANUFACTURING (2020)

Add to Collection

Article Engineering, Manufacturing

Microstructure and mechanical properties of (TiB plus TiC)/Ti composites fabricated in situ via selective laser melting of Ti and B4C powders

Changjun Han et al.

ADDITIVE MANUFACTURING (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Ultrahigh Aspect Ratio TiB Nanowhisker-Reinforced Titanium Matrix Composites as Lightweight and Low-Cost Replacements for Superalloys

Joseph A. Otte et al.

ACS APPLIED NANO MATERIALS (2020)

Add to Collection

Article Engineering, Chemical

In-situ preparation and formation of TiB/Ti-6Al-4V nanocomposite via laser additive manufacturing: Microstructure evolution and tribological behavior

Chao Cai et al.

POWDER TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Physical

Effect of TiB2 addition on the microstructure and wear resistance of Ti-6Al-4V alloy fabricated through direct metal laser sintering (DMLS)

Aniruddha S. Patil et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of boron nitride on reinforcement to improve high temperature oxidation resistance of titanium

Jose D. Avila et al.

JOURNAL OF MATERIALS RESEARCH (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Densification behavior, microstructure evolution and fretting wear performance of in-situ hybrid strengthened Ti-based composite by laser powder-bed fusion

Mujian Xia et al.

VACUUM (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing

M. J. Bermingham et al.

ACTA MATERIALIA (2019)

Add to Collection

Review Materials Science, Multidisciplinary

A Review on High-Strength Titanium Alloys: Microstructure, Strengthening, and Properties

LiMei Kang et al.

ADVANCED ENGINEERING MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Influence of re-melting on surface roughness and porosity of AlSi10Mg parts fabricated by selective laser melting

Wenhui Yu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of boron addition on microstructures and mechanical properties of Ti-6Al-4V manufactured by direct laser deposition

K. Zhang et al.

MATERIALS & DESIGN (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Selective Laser Melting to Manufacture In Situ Metal Matrix Composites: A Review

Sasan Dadbakhsh et al.

ADVANCED ENGINEERING MATERIALS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of trace boron addition on microstructure, tensile properties and their anisotropy of Ti6Al4V fabricated by laser directed energy deposition

Aitang Xue et al.

MATERIALS & DESIGN (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Melt pool geometry and microstructure of Ti6Al4V with B additions processed by selective laser melting additive manufacturing

Yining He et al.

MATERIALS & DESIGN (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Selective laser melting of hybrid ex-situ/in-situ reinforced titanium matrix composites: Laser/powder interaction, reinforcement formation mechanism, and non-equilibrium microstructural evolutions

Eskandar Fereiduni et al.

MATERIALS & DESIGN (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Machine learning in materials science

Jing Wei et al.

INFOMAT (2019)

Add to Collection

Article Engineering, Multidisciplinary

Laser deposition-additive manufacturing of TiB-Ti composites with novel three-dimensional quasi-continuous network microstructure: Effects on strengthening and toughening

Yingbin Hu et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Article Chemistry, Physical

Face-centered-cubic titanium - A new crystal structure of Ti in a Ti-8Mo-6Fe alloy

G. Han et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of trace lanthanum hexaboride and boron additions on microstructure, tensile properties and anisotropy of Ti-6Al-4V produced by additive manufacturing

M. J. Bermingham et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Optics

Laser engineered net shaping of quasi-continuous network microstructural TiB reinforced titanium matrix bulk composites: Microstructure and wear performance

Yingbin Hu et al.

OPTICS AND LASER TECHNOLOGY (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Additive manufacturing of metallic components - Process, structure and properties

T. DebRoy et al.

PROGRESS IN MATERIALS SCIENCE (2018)

Add to Collection

Article Materials Science, Coatings & Films

Investigation on microstructure, mechanical and tribological properties of in-situ (TiB plus TiC)/Ti composite during the electron beam surface melting

Xuewei Tao et al.

SURFACE & COATINGS TECHNOLOGY (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review

Y. Kok et al.

MATERIALS & DESIGN (2018)

Add to Collection

Article Engineering, Manufacturing

Metallurgical features of direct laser-deposited Ti6Al4V with trace boron

R. A. Rahman Rashid et al.

JOURNAL OF MANUFACTURING PROCESSES (2018)

Add to Collection

Review Engineering, Manufacturing

A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement

Bintao Wu et al.

JOURNAL OF MANUFACTURING PROCESSES (2018)

Add to Collection

Article Engineering, Manufacturing

Reactive-deposition-based additive manufacturing of Ti-Zr-BN composites

Kellen D. Traxel et al.

ADDITIVE MANUFACTURING (2018)

Add to Collection

Proceedings Paper Engineering, Manufacturing

Rapid TMC laser prototyping: Compositional and phase-structural sustainability via combinatorial design of titanium-based gradient alloy reinforced by nano-sized TiC or TiB2 ceramics

Igor Shishkovsky et al.

LASER 3D MANUFACTURING V (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Hypoeutectic Boron Additions on the Grain Size and Mechanical Properties of Ti-6Al-4V Manufactured with Powder Bed Electron Beam Additive Manufacturing

Zaynab Mahbooba et al.

JOM (2017)

Add to Collection

Article Automation & Control Systems

Laser deposition-additive manufacturing of in situ TiB reinforced titanium matrix composites: TiB growth and part performance

Yingbin Hu et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

Add to Collection

Article Chemistry, Physical

Microstructure growth behavior and its evolution mechanism during laser additive manufacture of in-situ reinforced (TiB plus TiC)/Ti composite

Mujian Xia et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Engineering, Industrial

Microstructure and mechanical properties investigation of CP titanium processed by selective laser melting (SLM)

Bartlomiej Wysocki et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Orientation relationship in a Ti/TiB metal-matrix composite

M. Ozerov et al.

MATERIALS LETTERS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

In-situ ultrafine three-dimensional quasi-continuous network microstructural TiB reinforced titanium matrix composites fabrication using laser engineered net shaping

Yingbin Hu et al.

MATERIALS LETTERS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Interfacial reactions between titanium and boron nitride nanotubes

Md Mahedi Hasan Bhuiyan et al.

SCRIPTA MATERIALIA (2017)

Add to Collection

Article Mechanics

Graded layered titanium composite structures with TiB2 inclusions fabricated by selective laser melting

Igor Shishkovsky et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Electrochemistry

Corrosion Behaviour of Selective Laser Melted Ti-TiB Biocomposite in Simulated Body Fluid

Yang Chen et al.

ELECTROCHIMICA ACTA (2017)

Add to Collection

Review Materials Science, Multidisciplinary

Recent advances in grain refinement of light metals and alloys

M. A. Easton et al.

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2016)

Add to Collection

Article Engineering, Industrial

The effect of laser remelting on the surface chemistry of Ti6al4V components fabricated by selective laser melting

Jayasheelan Vaithilingam et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Additive layer manufacturing of titanium matrix composites using the direct metal deposition laser process

S. Pouzet et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Structure and properties of Ti-C-B coatings produced by non-vacuum electron beam cladding

O. G. Lenivtseva et al.

INTERNATIONAL CONFERENCE AND YOUTH SCIENTIFIC SCHOOL ON MATERIALS AND TECHNOLOGIES OF NEW GENERATIONS IN MODERN MATERIALS SCIENCE (2016)

Add to Collection

Article Engineering, Manufacturing

In-situ TiB/near α Ti matrix composites manufactured by selective laser melting

Nan Kang et al.

ADDITIVE MANUFACTURING (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Controlling the microstructure and properties of wire arc additive manufactured Ti-6Al-4V with trace boron additions

M. J. Bermingham et al.

ACTA MATERIALIA (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing

Beth E. Carroll et al.

ACTA MATERIALIA (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Mechanical behavior of porous commercially pure Ti and Ti-TiB composite materials manufactured by selective laser melting

H. Attar et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Selective laser melting of in situ titanium-titanium boride composites: Processing, microstructure and mechanical properties

Hooyar Attar et al.

ACTA MATERIALIA (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Comparative study of microstructures and mechanical properties of in situ Ti-TiB composites produced by selective laser melting, powder metallurgy, and casting technologies

H. Attar et al.

JOURNAL OF MATERIALS RESEARCH (2014)

Add to Collection

Article Engineering, Biomedical

In situ synthesized TiB-TiN reinforced Ti6Al4V alloy composite coatings: Microstructure, tribological and in-vitro biocompatibility

Mitun Das et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2014)

Add to Collection

Article Nanoscience & Nanotechnology

The effect of lanthanum boride on the sintering, sintered microstructure and mechanical properties of titanium and titanium alloys

Y. F. Yang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Perspectives on Titanium Science and Technology

Dipankar Banerjee et al.

ACTA MATERIALIA (2013)

Add to Collection

Article Chemistry, Physical

Modification of the α-Ti laths to near equiaxed α-Ti grains in as-sintered titanium and titanium alloys by a small addition of boron

Y. F. Yang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of Ti content and sintering temperature on the microstructures and mechanical properties of TiB reinforced titanium composites synthesized by SPS process

Sai Wei et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium

Dongdong Gu et al.

ACTA MATERIALIA (2012)

Add to Collection

Review Materials Science, Multidisciplinary

Laser additive manufacturing of metallic components: materials, processes and mechanisms

D. D. Gu et al.

INTERNATIONAL MATERIALS REVIEWS (2012)

Add to Collection

Review Materials Science, Multidisciplinary

Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies

Lawrence E. Murr et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2012)

Add to Collection

Article Nanoscience & Nanotechnology

Laser processing of in situ synthesized TiB-TiN-reinforced Ti6A14V alloy coatings

Mitun Das et al.

SCRIPTA MATERIALIA (2012)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of aspect ratios of in situ formed TiB whiskers on the mechanical properties of TiBw/Ti-6Al-4V composites

Min Young Koo et al.

SCRIPTA MATERIALIA (2012)

Add to Collection

Proceedings Paper Metallurgy & Metallurgical Engineering

Rare earth element: is it a necessity for PM Ti alloys?

Yong Liu et al.

POWDER METALLURGY OF TITANIUM: POWDER PROCESSING, CONSOLIDATION AND METALLURGY OF TITANIUM (2012)

Add to Collection

Proceedings Paper Engineering, Multidisciplinary

Surface Modification of Pure Titanium by TiB Precipitation

A. Miklaszewski et al.

ENVIRONMENTAL DEGRADATION OF ENGINEERING & MATERIALS ENGINEERING AND TECHNOLOGIES (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Development of solidification microstructure in boron-modified alloy Ti-6Al-4V-0.1B

Shibayan Roy et al.

ACTA MATERIALIA (2011)

Add to Collection

Article Materials Science, Multidisciplinary

The Interdependence Theory: The relationship between grain formation and nucleant selection

D. H. StJohn et al.

ACTA MATERIALIA (2011)

Add to Collection

Article Engineering, Industrial

Characterization of (TiB + TiC)/TC4 in situ titanium matrix composites prepared by laser direct deposition

Yongzhong Zhang et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)

Add to Collection

Article Engineering, Multidisciplinary

Microstructure engineering of titanium alloys via small boron additions

S. Tamirisakandala et al.

INTERNATIONAL JOURNAL OF ADVANCES IN ENGINEERING SCIENCES AND APPLIED MATHEMATICS (2010)

Add to Collection

Article Materials Science, Composites

Improved processing of carbon nanotube/magnesium alloy composites

Qianqian Li et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2009)

Add to Collection

Review Materials Science, Composites

Processing-structure-property aspects of particulate- and whisker-reinforced titanium matrix composites

S. C. Tjong et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2008)

Add to Collection

Article Chemistry, Physical

Microstructure and mechanical property of in situ synthesized multiple-reinforced (TiB+TiC+La2O3)/Ti composites

Zhifeng Yang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2008)

Add to Collection

Article Engineering, Industrial

Direct laser fabrication of Ti6Al4V/TiB

F. Wang et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Grain-refinement mechanisms in titanium alloys

M. J. Bermingham et al.

JOURNAL OF MATERIALS RESEARCH (2008)

Add to Collection

Article Nanoscience & Nanotechnology

The mechanism of grain refinement of titanium by silicon

M. J. Bermingham et al.

SCRIPTA MATERIALIA (2008)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of boron on microstructure in cast titanium alloys

M. J. Bermingham et al.

SCRIPTA MATERIALIA (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Processing, microstructure, texture, and tensile properties of the Ti-6Al-4V-1.55B eutectic alloy

Orest M. Ivasishin et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2008)

Add to Collection

Article Microscopy

Reliability of reconstructed β-orientation maps in titanium alloys

L. Germain et al.

ULTRAMICROSCOPY (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructural effects on the mechanical behavior of B-modified Ti-6Al-4V alloys

Indrani Sen et al.

ACTA MATERIALIA (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Processing and properties of titanium-titanium boride (TiBw) matrix composites -: a review

K. Morsi et al.

JOURNAL OF MATERIALS SCIENCE (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of boron concentration on martensitic transformation temperatures, stress for inducing martensite and slip stress of Ti-24mol%Nb-3mol%Al superelastic alloy

Yosuke Horiuchi et al.

MATERIALS TRANSACTIONS (2007)

Add to Collection

Article Nanoscience & Nanotechnology

Stacking faults formation mechanism of in situ synthesized TiB whiskers

Haibo Feng et al.

SCRIPTA MATERIALIA (2006)

Add to Collection

Article Chemistry, Multidisciplinary

Growth mechanism of in situ TiB whiskers in spark plasma sintered TiB/Ti metal matrix composites

HB Feng et al.

CRYSTAL GROWTH & DESIGN (2006)

Add to Collection

Article Materials Science, Multidisciplinary

Structure of TiB precipitates in laser deposited in situ, Ti-6Al-4V-TiB composites

A Genç et al.

MATERIALS LETTERS (2006)

Add to Collection

Article Nanoscience & Nanotechnology

Grain refinement of cast titanium alloys via trace boron addition

S Tamirisakandala et al.

SCRIPTA MATERIALIA (2005)

Add to Collection

Article Nanoscience & Nanotechnology

Nanoscale TiB precipitates in laser deposited Ti-matrix composites

R Banerjee et al.

SCRIPTA MATERIALIA (2005)

Add to Collection

Letter Materials Science, Multidisciplinary

Wear properties of alloyed layers produced by laser surface alloying of pure titanium with B4C and Ti mixed powders

YS Tian et al.

JOURNAL OF MATERIALS SCIENCE (2005)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of boron on the beta transus of Ti-6Al-4V alloy

S Tamirisakandala et al.

SCRIPTA MATERIALIA (2005)

Add to Collection

Article Chemistry, Physical

Formation of titanium nitride by mechanical milling and isothermal annealing of titanium and boron nitride

ZH Ding et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2005)

Add to Collection

Article Nanoscience & Nanotechnology

Formation of equiaxed alpha in TiB reinforced Ti alloy composites

D Hill et al.

SCRIPTA MATERIALIA (2005)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and properties of TiB/Ti-6Al-4V coatings produced with laser treatments

D Galvan et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2004)

Add to Collection

Article Materials Science, Multidisciplinary

Comparison of microstructural evolution in laser-deposited and arc-melted in-situ Ti-TiB composites

R Banerjee et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2004)

Add to Collection

Article Materials Science, Coatings & Films

Improvement of high-temperature hardness of (TiC, TiB)/Ti-6Al-4V surface composites fabricated by high-energy electron-beam irradiation

E Yun et al.

SURFACE & COATINGS TECHNOLOGY (2004)

Add to Collection

Article Materials Science, Multidisciplinary

Continuous cooling β-to-α transformation behaviors of extra-pure and commercially pure Ti

MS Oh et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2004)

Add to Collection

Article Nanoscience & Nanotechnology

Direct laser deposition of in situ Ti-6Al-4V-TiB composites

R Banerjee et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)

Add to Collection

Article Materials Science, Multidisciplinary

The evolution of microstructure in a laser clad TiB-Ti composite coating

BJ Kooi et al.

ACTA MATERIALIA (2003)

Add to Collection

Article Nanoscience & Nanotechnology

Investigation of the Young's modulus of TiB needles in situ produced in titanium matrix composite

S Gorsse et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)

Add to Collection

Review Multidisciplinary Sciences

Graded materials for resistance to contact deformation and damage

S Suresh

SCIENCE (2001)

Add to Collection

Article Materials Science, Multidisciplinary

A model of grain refinement incorporating alloy constitution and potency of heterogeneous nucleant particles

MA Easton et al.

ACTA MATERIALIA (2001)

Add to Collection

Article Materials Science, Ceramics

Reaction of titanium with boron nitride under self-propagating high-temperature synthesis conditions

SP Gordienko et al.

POWDER METALLURGY AND METAL CERAMICS (2001)

Add to Collection

Review Materials Science, Multidisciplinary

Microstructural and mechanical characteristics of in situ metal matrix composites

SC Tjong et al.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2000)

Add to Collection

Article Chemistry, Physical

The mechanism of grain refinement in TiAl alloys by boron addition - an alternative hypothesis

TT Cheng

INTERMETALLICS (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.