☆ 4.7 Article

Investigation of driving forces in a phase field approach to mixed mode fracture of concrete

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Multidisciplinary

Virtual element method for phase field modeling of dynamic fracture

Tong-Rui Liu et al.

Summary: In this paper, a new and efficient virtual element scheme for phase field modeling of dynamic fracture is proposed using an explicit time integration scheme. The whole problem is divided into two parts: mechanical and damage sub-problems, treated as elastodynamic and Poisson equations respectively. Benchmark problems are validated to test the performance of the proposed numerical framework, showing good agreement with corresponding numerical and experimental studies. Moreover, VEM outperforms FEM in terms of memory efficiency and choice of element type.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2023)

Add to Collection

Article Engineering, Multidisciplinary

A multiscale phase field fracture approach based on the non-affine microsphere model for rubber-like materials

Prajwal Kammardi Arunachala et al.

Summary: Rubber-like materials with high stretchability and increased toughness have a wide range of applications. Computational models that can simulate their fracture behavior are crucial for designing materials to prevent failures. This study integrates the phase field fracture approach and a multiscale polymer model to predict fracture behavior in elastomers. The model is able to qualitatively predict complex crack propagation and quantitatively estimate overall fracture behavior.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2023)

Add to Collection

Article Engineering, Multidisciplinary

Phase-field modeling of drying-induced cracks: Choice of coupling and study of homogeneous and localized damage

Chenyi Luo et al.

Summary: This paper focuses on fundamental modeling aspects of phase-field modeling for drying cracks in variably saturated porous media. Different formulations for total energy and variational analysis of damage evolution are evaluated. The analysis reveals the relationship between drying crack spacing and material and loading parameters.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2023)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A better understanding of the mechanics of borehole breakout utilizing a finite strain gradient-enhanced micropolar continuum model

M. Neuner et al.

Summary: This study investigates the influence of material properties on the predicted borehole breakout mode through finite element analysis. It is found that the brittleness of the material in the post peak regime has a significant impact on the predicted failure type.

COMPUTERS AND GEOTECHNICS (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Phase-field method with additional dissipation force for mixed-mode cohesive fracture

Ye Feng et al.

Summary: This study presents a new phase-field fracture modeling method that can be applied to cases where toughness depends on different fracture modes, and validates the effectiveness of the method through numerical examples.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2022)

Add to Collection

Article Engineering, Geological

Multi-phase-field microporomechanics model for simulating ice-lens growth in frozen soil

Hyoung Suk Suh et al.

Summary: This article presents a multi-phase-field poromechanics model that can simulate the growth and thaw of ice lenses and the resultant frozen heave and thaw settlement in frozen soils. The model introduces an immersed approach to capture the freezing influence on shear strength more accurately.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

The revisited phase-field approach to brittle fracture: application to indentation and notch problems

A. Kumar et al.

Summary: In this paper, a comprehensive macroscopic phase-field theory for fracture in brittle materials is introduced. The theory extends the phase-field approximation to account for material strength and is validated through comparison with experimental results.

INTERNATIONAL JOURNAL OF FRACTURE (2022)

Add to Collection

Article Engineering, Multidisciplinary

A thermodynamically consistent finite strain phase field approach to ductile fracture considering multi-axial stress states

Sina Abrari Vajari et al.

Summary: Phase field models for ductile fracture have been widely studied, but most existing methods only consider the effects of plastic deformation and neglect the multi-axial stress states in practical designs. In this work, a thermodynamically consistent phase field method coupled with finite strain plasticity is proposed to address this issue. The Stress-Weighted Ductile Fracture Model (SWDFM) is utilized to capture the coupling between plasticity and stress states. The excellent performance of the SWDFM in predicting ductile crack initiation motivates its incorporation into the phase field approach for predicting crack initiation and propagation.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2022)

Add to Collection

Article Mechanics

A unified finite strain gradient-enhanced micropolar continuum approach for modeling quasi-brittle failure of cohesive-frictional materials

Matthias Neuner et al.

Summary: In this work, a novel framework for modeling quasi-brittle crack propagation and shear band dominated failure of cohesive-frictional materials is proposed. The framework combines the gradient-enhanced continuum and the micropolar continuum, and is formulated based on the thermodynamically sound theory of hyperelasto-plasticity. The approach is assessed through constitutive models for particular materials and validated by numerical benchmark examples and experimental comparisons.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2022)

Add to Collection

Article Engineering, Multidisciplinary

Three-dimensional phase-field modeling of mode I plus II/III failure in solids

Jian-Ying Wu et al.

Summary: Phase-field models offer a seamless approach to simulate various phenomena related to cracks in a unified theoretical framework, showing significant progress in solving 3D fracture problems. By using advanced numerical methods, complex fracture patterns with millions of elements and degrees of freedom can be efficiently handled within acceptable computational time, enabling qualitative and quantitative comparisons with experimental results.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2021)

Add to Collection

Article Engineering, Multidisciplinary

Multilevel global-local techniques for adaptive ductile phase-field fracture

Fadi Aldakheel et al.

Summary: This paper presents a rigorous variational-based multilevel Global-Local formulation for ductile fracture, using phase-field method and constitutive work density function to address plasticity and damage. Two Global-Local approaches are proposed, one with a global constitutive model coupled with a single local domain, and the other with a global constitutive model coupled with two local domains. The introduction of predictor-corrector adaptivity within the Global-Local concept aims to reduce computational costs and improve accuracy and efficiency.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2021)

Add to Collection

Article Engineering, Multidisciplinary

Phase field modeling of frictional slip with slip weakening/strengthening under non-isothermal conditions

Eric C. Bryant et al.

Summary: This study utilizes a phase field framework to investigate the frictional slip of strong discontinuities in geological formations of different length scales, proposing a regularized constitutive law adjusted based on loading rates and temperature ranges. Numerical examples demonstrate that this model can capture the frictional response along complex interfaces.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2021)

Add to Collection

Article Mechanics

A rate-dependent phase-field framework for the dynamic failure of quasi-brittle materials

Lu Hai et al.

Summary: The newly developed phase-field damage model can effectively characterize the dynamic failure process of quasi-brittle solids, with good agreement between numerical predictions and experimental results.

ENGINEERING FRACTURE MECHANICS (2021)

Add to Collection

Article Engineering, Mechanical

A localizing gradient enhanced isotropic damage model with Ottosen equivalent strain for the mixed-mode fracture of concrete

Amit Subhash Shedbale et al.

Summary: A new equivalent strain based on the four-parameter failure criterion by Ottosen is proposed to enhance standard isotropic damage models for mixed-mode fracture, benchmarked against other commonly used equivalent strain definitions. Shear failure is utilized as one of the states for determining the four parameters, with mesh sensitivity resolved by adopting localizing gradient enhancement. Numerical analysis includes tests on Double-Edge-Notched (DEN) specimens and interactive tests with multi axial loadings for Single-Edge-Notched (SEN) specimens, demonstrating accurate capture of mixed-mode fracture by a simple isotropic damage model combined with the new equivalent strain measure.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Endowing explicit cohesive laws to the phase-field fracture theory

Ye Feng et al.

Summary: This paper proposes a phase-field model with energy density determined by an arbitrary cohesive law, establishing a rigorous connection between phase-field theory and cohesive zone theory. The method allows for determination of energy density for any cohesive law from a unified formula. Numerical examples demonstrate the effectiveness of the proposed method in predicting cohesive laws and crack paths.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2021)

Add to Collection

Article Engineering, Multidisciplinary

On the BFGS monolithic algorithm for the unified phase field damage theory

Jian-Ying Wu et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)

Add to Collection

Article Engineering, Mechanical

The phase-field approach to self-healable fracture of elastomers: A model accounting for fracture nucleation at large, with application to a class of conspicuous experiments

Aditya Kumar et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Revisiting nucleation in the phase-field approach to brittle fracture

Aditya Kumar et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2020)

Add to Collection

Article Engineering, Multidisciplinary

A phase-field model of fracture with frictionless contact and random fracture properties: Application to thin-film fracture and soil desiccation

Tianchen Hu et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)

Add to Collection

Article Engineering, Mechanical

A new test method for the complete load-displacement curve of concrete under mixed mode I-II fracture

Zhi-Min Wu et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)

Add to Collection

Article Computer Science, Software Engineering

MOOSE: Enabling massively parallel multiphysics simulation

Cody J. Permann et al.

SOFTWAREX (2020)

Add to Collection

Article Mathematics, Interdisciplinary Applications

A phase-field crack model based on directional stress decomposition

Christian Steinke et al.

COMPUTATIONAL MECHANICS (2019)

Add to Collection

Article Mechanics

Phase field and gradient enhanced damage models for quasi-brittle failure: A numerical comparative study

Tushar K. Mandal et al.

ENGINEERING FRACTURE MECHANICS (2019)

Add to Collection

Article Engineering, Multidisciplinary

A phase-field formulation for dynamic cohesive fracture

Rudy J. M. Geelen et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)

Add to Collection

Article Engineering, Multidisciplinary

A geometrically regularized gradient-damage model with energetic equivalence

Jian-Ying Wu

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2018)

Add to Collection

Article Mechanics

Phase-field regularized cohesive zone model (CZM) and size effect of concrete

De-Cheng Feng et al.

ENGINEERING FRACTURE MECHANICS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

A length scale insensitive phase-field damage model for brittle fracture

Jian-Ying Wu et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Progressive damage and rupture in polymers

Brandon Talamini et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)

Add to Collection

Article Engineering, Multidisciplinary

A mixed-mode phase field fracture model in anisotropic rocks with consistent kinematics

Eric C. Bryant et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2018)

Add to Collection

Article Materials Science, Multidisciplinary

A nonlocal damage model for plain concrete consistent with cohesive fracture

Eric Lorentz

INTERNATIONAL JOURNAL OF FRACTURE (2017)

Add to Collection

Article Materials Science, Multidisciplinary

A unified phase-field theory for the mechanics of damage and quasi-brittle failure

Jian-Ying Wu

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2017)

Add to Collection

Article Mathematics, Interdisciplinary Applications

Phase field modeling of brittle fracture for enhanced assumed strain shells at large deformations: formulation and finite element implementation

J. Reinoso et al.

COMPUTATIONAL MECHANICS (2017)

Add to Collection

Article Mathematics, Interdisciplinary Applications

A phase-field model for ductile fracture at finite strains and its experimental verification

Marreddy Ambati et al.

COMPUTATIONAL MECHANICS (2016)

Add to Collection

Article Engineering, Multidisciplinary

A phase-field formulation for fracture in ductile materials: Finite defonnation balance law derivation, plastic degradation, and stress triaxiality effects

Michael J. Borden et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2016)

Add to Collection

Article Engineering, Multidisciplinary

A variational framework to model diffusion induced large plastic deformation and phase field fracture during initial two-phase lithiation of silicon electrodes

Xiaoxuan Zhang et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2016)

Add to Collection

Article Engineering, Multidisciplinary

Phase-field description of brittle fracture in plates and shells

Josef Kiendl et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2016)

Add to Collection

Article Mathematics, Interdisciplinary Applications

Phase-field modeling of ductile fracture

M. Ambati et al.

COMPUTATIONAL MECHANICS (2015)

Add to Collection

Article Engineering, Multidisciplinary

Phase field modeling of fracture in multi-physics problems. Part II. Coupled brittle-to-ductile failure criteria and crack propagation in thermo-elastic-plastic solids

C. Miehe et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2015)

Add to Collection

Article Engineering, Multidisciplinary

Phase field modeling of fracture in multi-physics problems. Part I. Balance of crack surface and failure criteria for brittle crack propagation in thermo-elastic solids

Christian Miehe et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Phase field modeling of fracture in rubbery polymers. Part I: Finite elasticity coupled with brittle failure

Christian Miehe et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2014)

Add to Collection

Article Engineering, Multidisciplinary

A strong discontinuity approach on multiple levels to model solids at failure

Christian Linder et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2013)

Add to Collection

Article Engineering, Multidisciplinary

A marching cubes based failure surface propagation concept for three-dimensional finite elements with non-planar embedded strong discontinuities of higher-order kinematics

Christian Linder et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2013)

Add to Collection

Article Engineering, Multidisciplinary

A phase-field model for cohesive fracture

Clemens V. Verhoosel et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2013)

Add to Collection

Article Engineering, Mechanical

Numerical Method for Mixed-Mode I-II Crack Propagation in Concrete

ZhiMin Wu et al.

JOURNAL OF ENGINEERING MECHANICS (2013)

Add to Collection

Article Engineering, Multidisciplinary

A phase-field description of dynamic brittle fracture

Michael J. Borden et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2012)

Add to Collection

Article Engineering, Multidisciplinary

Three-dimensional finite elements with embedded strong discontinuities to model material failure in the infinitesimal range

F. Armero et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2012)

Add to Collection

Article Engineering, Multidisciplinary

Blossom-Quad: A non-uniform quadrilateral mesh generator using a minimum-cost perfect-matching algorithm

J. -F. Remacle et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2012)

Add to Collection

Article Materials Science, Multidisciplinary

A time-discrete model for dynamic fracture based on crack regularization

Blaise Bourdin et al.

INTERNATIONAL JOURNAL OF FRACTURE (2011)

Add to Collection

Article Engineering, Multidisciplinary

A phase field model for rate-independent crack propagation: Robust algorithmic implementation based on operator splits

Christian Miehe et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2010)

Add to Collection

Article Engineering, Multidisciplinary

Thermodynamically consistent phase-field models of fracture: Variational principles and multi-field FE implementations

C. Miehe et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Regularized formulation of the variational brittle fracture with unilateral contact: Numerical experiments

Hanen Amor et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2009)

Add to Collection

Article Engineering, Multidisciplinary

New finite elements with embedded strong discontinuities in the finite deformation range

F. Armero et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2008)

Add to Collection

Article Engineering, Multidisciplinary

The variational approach to fracture

Blaise Bourdin et al.

JOURNAL OF ELASTICITY (2008)

Add to Collection

Article Engineering, Multidisciplinary

Finite elements with embedded strong discontinuities for the modeling of failure in solids

C. Linder et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2007)

Add to Collection

Article Computer Science, Software Engineering

Flexible complementarity solvers for large-scale applications

SJ Benson et al.

OPTIMIZATION METHODS & SOFTWARE (2006)

Add to Collection

Article Engineering, Multidisciplinary

A new method for modelling cohesive cracks using finite elements

GN Wells et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2001)

Add to Collection

Article Materials Science, Multidisciplinary

Numerical experiments in revisited brittle fracture

B Bourdin et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.