☆ 4.7 Article

Identification of the error excitation in gear systems: A mediator algorithm between simulation and experiment

JOURNAL OF SOUND AND VIBRATION (2024)

Related references

Note: Only part of the references are listed.

Article Engineering, Mechanical

Coupling mechanism between systematic elastic deformation and gear surface damage

Yifan Huangfu et al.

Summary: This paper develops a deformable body dynamic model to obtain systematic elastic deformation and uses a hybrid finite element-analytical contact model to obtain load distribution under non-ideal meshing conditions. A generalized surface damage model is developed based on the transient elastohydrodynamic lubrication theory, considering the concurrent effects of surface wear and pitting. The proposed multi-physics model bridges macroscopic deformation and microscopic behaviors and can be used for tooth fault prognosis, physics-based condition monitoring, and configuration design.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

Add to Collection

Article Engineering, Mechanical

Nonlinear dynamic characteristics of a spur gear pair considering extended tooth contact and coupling effect between gear neighboring teeth

Zhengfa Li et al.

Summary: This paper establishes a dynamic model of spur gear pair considering the extended tooth contact, coupling effect between gear neighboring teeth, and some time-varying parameters. The study reveals the impact of the extended tooth contact and coupling effect on the bifurcation characteristics of the gear system. The results show that the coupling effect between neighboring teeth intensifies the system bifurcation and chaotic motion, while extended tooth contact enhances this effect. However, more extended tooth contact decreases the parameter range of system bifurcation.

NONLINEAR DYNAMICS (2023)

Add to Collection

Article Engineering, Multidisciplinary

Improved analytical model for mesh stiffness calculation of cracked helical gear considering interactions between neighboring teeth

JieYu Ning et al.

Summary: An improved mesh stiffness calculation method for helical gear with spatial crack is proposed in this study to consider the coupling effects between neighboring loaded teeth, improving the accuracy and applicability of the calculation. The load distribution law for the engaged cracked tooth along the tooth width and profile can be obtained. The results show that the mesh stiffness of the multi-tooth engagement calculation using this model can be further improved compared with traditional methods.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2023)

Add to Collection

Article Engineering, Mechanical

Dynamic modelling of the gear system under non-stationary conditions using the iterative convergence of the tooth mesh stiffness

Song Xue et al.

Summary: This paper presents a new gear dynamic model that considers the coupling between the external load and the internal gear excitation, which can improve the accuracy of gear dynamic modeling and fault diagnostics.

ENGINEERING FAILURE ANALYSIS (2022)

Add to Collection

Article Engineering, Mechanical

A tribo-dynamic based pitting evolution model of planetary gear sets: A topographical updating approach

Yifan Huangfu et al.

Summary: A dynamic pitting evolution model of planetary gear sets is developed in this study, which utilizes a fast dynamic load distribution algorithm, mixed elastohydrodynamic lubrication theory, and contact fatigue model to predict the changes in pitting topography. The effectiveness of the model is demonstrated through two experimental examples.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Add to Collection

Article Engineering, Mechanical

Use of transmission error for a quantitative estimation of root-crack severity in gears

Zhan Yie Chin et al.

Summary: Gear transmission error (TE) has been recognized as an effective diagnostic tool for condition monitoring, particularly in assessing gear wear severity. However, there has been a lack of accurate and reliable TE-based methods for estimating crack size in crack diagnostics. This paper proposes a new methodology that overcomes the challenges of dynamic TE effects and the separation of profile error and compliance-related tooth deflections, achieving automated identification of the cracked tooth and crack-depth estimation using different speeds and loads.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Engineering, Mechanical

A novel similarity-based status characterization methodology for gear surface wear propagation monitoring

Ke Feng et al.

Summary: The gearbox is a crucial component in rotating machinery. Surface wear is inevitable and can lead to catastrophic failures. This paper presents a novel method for monitoring gear wear, which evaluates gear tooth contact characteristics at different wear severities and is significant for gear system health management.

TRIBOLOGY INTERNATIONAL (2022)

Add to Collection

Article Engineering, Multidisciplinary

A new autocorrelation-based strategy for multiple fault feature extraction from gearbox vibration signals

Xiuzhi He et al.

Summary: Gearboxes play a crucial role in rotating machines, and diagnosing faults in them is essential for cost reduction and preventing casualties and property losses. Due to the presence of heavy Gaussian and non-Gaussian background noises, the multi-fault diagnosis of gearboxes becomes challenging. The proposed LEASgram method, utilizing the CFI indicator for multi-fault detection, demonstrates significant capability in fault identification and separation.

MEASUREMENT (2021)

Add to Collection

Article Engineering, Mechanical

Use of cyclostationary properties of vibration signals to identify gear wear mechanisms and track wear evolution

Ke Feng et al.

Summary: A vibration-based wear mechanism identification method is proposed in this paper, which tracks the evolution of fatigue pitting and abrasive wear through the gearmesh-modulated properties of vibration signals. The effectiveness of this method in identifying and tracking fatigue pitting and abrasive wear has been validated in lubricated and dry tests.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Add to Collection

Article Engineering, Mechanical

Transmission error investigation of gearbox using rigid-flexible coupling dynamic model: Theoretical analysis and experiments

Tiantang Duan et al.

Summary: In this study, a system-level investigation of gearbox transmission error (TE) was conducted by proposing a rigid-flexible coupling dynamic model. The results showed that TE increases with load, but decreases when considering housing flexibility. Properly decreasing the stiffness of the housing and increasing the inner radius of the hollow shaft can reduce system TE.

MECHANISM AND MACHINE THEORY (2021)

Add to Collection

Article Engineering, Mechanical

Generation mechanism and evolution of five-state meshing behavior of a spur gear system considering gear-tooth time-varying contact characteristics

Jian-fei Shi et al.

Summary: This study elaborates on the characteristics and evolution process of a gear system with five-state meshing behavior by establishing a new nonlinear dynamic model, revealing the generation mechanism and influencing factors of multi-state meshing behavior. The results show the impact of parameter changes on the evolution of five-state meshing behavior, particularly in reducing the number of teeth disengagement through grazing bifurcation, and inspiring chaotic behavior for the system's multi-state meshing vibration.

NONLINEAR DYNAMICS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Flexible dynamic modeling and analysis of drive train for Offshore Floating Wind Turbine

Zhanwei Li et al.

RENEWABLE ENERGY (2020)

Add to Collection

Article Engineering, Mechanical

A non-contact high precision measuring method for the radial runout of cylindrical gear tooth profile

Yong-Chen Pei et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Add to Collection

Article Engineering, Mechanical

Meshing and dynamic characteristics analysis of spalled gear systems: A theoretical and experimental study

Yifan Huangfu et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Add to Collection

Article Engineering, Mechanical

Calculation of time-varying backlash for an involute spur gear

Jian-Fei Shi et al.

MECHANISM AND MACHINE THEORY (2020)

Add to Collection

Article Engineering, Mechanical

Effects of tooth modifications on the dynamic characteristics of thin-rimmed gears under surface wear

Yifan Huangfu et al.

MECHANISM AND MACHINE THEORY (2020)

Add to Collection

Article Engineering, Mechanical

Prediction of Surface Wear of Involute Gears Based on a Modified Fractal Method

G. Li et al.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2019)

Add to Collection

Article Engineering, Mechanical

Dynamical modeling and experimental validation for tooth pitting and spalling in spur gears

Yang Luo et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Add to Collection

Article Engineering, Mechanical

Crack detection for spur gears with asymmetric teeth based on the dynamic transmission error

Oguz Dogan et al.

MECHANISM AND MACHINE THEORY (2019)

Add to Collection

Article Engineering, Mechanical

Effects of oil film stiffness and damping on spur gear dynamics

Zeliang Xiao et al.

NONLINEAR DYNAMICS (2019)

Add to Collection

Article Engineering, Mechanical

Static and Dynamic Transmission Error Measurements of Helical Gear Pairs With Various Tooth Modifications

M. Benatar et al.

JOURNAL OF MECHANICAL DESIGN (2019)

Add to Collection

Article Engineering, Mechanical

A shape-independent approach to modelling gear tooth spalls for time varying mesh stiffness evaluation of a spur gear pair

Yang Luo et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Add to Collection

Article Engineering, Mechanical

Quasi-static analysis based on generalized loaded static transmission error and dynamic investigation of wide-faced cylindrical geared rotor systems

Bing Yuan et al.

MECHANISM AND MACHINE THEORY (2019)

Add to Collection

Article Engineering, Multidisciplinary

Investigation on meshing and dynamic characteristics of spur gears with tip relief under wear fault

Huangfu YiFan et al.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2019)

Add to Collection

Article Engineering, Mechanical

Calculation of mesh stiffness of spur gears considering complex foundation types and crack propagation paths

Kangkang Chen et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Add to Collection

Article Engineering, Mechanical

Modeling and dynamic response of parallel shaft gear transmission in non-inertial system

Aiqiang Zhang et al.

NONLINEAR DYNAMICS (2019)

Add to Collection

Article Engineering, Multidisciplinary

Stiffness and damping models for the oil film in line contact elastohydrodynamic lubrication and applications in the gear drive

Changjiang Zhou et al.

APPLIED MATHEMATICAL MODELLING (2018)

Add to Collection

Article Automation & Control Systems

Coupled Dynamic Characteristics of Wind Turbine Gearbox Driven by Ring Gear Considering Gravity

Aiqiang Zhang et al.

JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME (2018)

Add to Collection

Article Engineering, Mechanical

Improved analytical models for mesh stiffness and load sharing ratio of spur gears considering structure coupling effect

Chongyang Xie et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

Add to Collection

Article Engineering, Mechanical

A probability distribution model of tooth pits for evaluating time-varying mesh stiffness of pitting gears

Yaguo Lei et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

Add to Collection

Review Engineering, Mechanical

Dynamic modeling of gearbox faults: A review

Xihui Liang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

Add to Collection

Article Engineering, Mechanical

Propagation path and failure behavior analysis of cracked gears under different initial angles

Yunxia Chen et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

Add to Collection

Article Engineering, Mechanical

A study of nonlinear excitation modeling of helical gears with Modification: Theoretical analysis and experiments

Jing Wei et al.

MECHANISM AND MACHINE THEORY (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Resultant vibration signal model based fault diagnosis of a single stage planetary gear train with an incipient tooth crack on the sun gear

Xianzeng Liu et al.

RENEWABLE ENERGY (2018)

Add to Collection

Article Acoustics

Dynamic investigation of a locomotive with effect of gear transmissions under tractive conditions

Zaigang Chen et al.

JOURNAL OF SOUND AND VIBRATION (2017)

Add to Collection

Article Engineering, Mechanical

Effects of tooth profile modification on dynamic responses of a high speed gear-rotor-bearing system

Zehua Hu et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2016)

Add to Collection

Review Engineering, Mechanical

Review on dynamics of cracked gear systems

Hui Ma et al.

ENGINEERING FAILURE ANALYSIS (2015)

Add to Collection

Article Engineering, Mechanical

Time-varying mesh stiffness calculation of cracked spur gears

Hui Ma et al.

ENGINEERING FAILURE ANALYSIS (2014)

Add to Collection

Article Engineering, Mechanical

Dynamics analysis of a crowned gear transmission system with impact damping: Based on experimental transmission error

Chen Siyu et al.

MECHANISM AND MACHINE THEORY (2014)

Add to Collection

Article Engineering, Mechanical

Mesh stiffness calculation of a spur gear pair with tooth profile modification and tooth root crack

Zaigang Chen et al.

MECHANISM AND MACHINE THEORY (2013)

Add to Collection

Article Engineering, Mechanical

Cyclic spectral analysis in practice

Jerome Antoni

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2007)

Add to Collection

Article Engineering, Mechanical

Assessing the role of plastic deformation in gear-health monitoring by precision measurement of failed gears

W. D. Mark et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2007)

Add to Collection

© Peeref 2019-2024. All rights reserved.