Related references
Note: Only part of the references are listed.
Article
Chemistry, Physical
Mingjie Cai et al.
Summary: In this study, an integrative S-scheme heterojunction photocatalyst composed of Cd0.5Zn0.5S nanoparticles and BiOCl microflowers was developed for efficient degradation of PPCPs. The Cd0.5Zn0.5S/BiOCl showed significantly enhanced photo-activity and stability compared to pristine Cd0.5Zn0.5S or BiOCl, and it also demonstrated good resistance to various contaminants. The ability of Cd0.5Zn0.5S/BiOCl for PPCPs de-toxicity was verified through the evaluation of toxicity of norfloxacin and its degradation intermediate.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2023)
Article
Chemistry, Physical
Tongfei Xu et al.
Summary: In this work, Fe-doped flower-like In2S3/Fe3S4 hetero-microspheres (Fe-In2S3/Fe3S4 HMSs) were prepared through a facile one-pot solvothermal reaction and demonstrated as efficient S-scheme photocatalysts for visible-light-driven CO2 photoreduction. The doping of Fe reduced the bandgap of In2S3, extended the optical response to the visible-light region, increased the densities of donors and sulfur vacancies, and elevated the Fermi level. The enhanced interfacial electric field resulted in promoted carrier transfer in the S-scheme pathway. Fe-doped In2S3 also reduced the formation energy of the *CO intermediate, which favored the CO evolution at the surface.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2023)
Article
Chemistry, Physical
Ke Yan et al.
Summary: Photothermal catalysis using solar energy is a sustainable strategy for converting CO2 to valuable chemicals. In this work, a Bi2S3(a In2S3 heterostructure catalyst is fabricated to efficiently convert CO2 to C2H4 using photoexcited charge carriers and elevated temperature. The catalyst has unique active sites consisting of Bi and In atoms coupled with sulfur vacancies, enabling selective C2H4 production. The integration of these active sites and the photothermal effect results in high conversion rates and selectivity for CO2 under simulated sunlight. This work provides guidance for the development of efficient photothermal catalysts for CO2 conversion using solar energy.
Article
Engineering, Environmental
Soumya Ranjan Mishra et al.
Summary: A glycerol-mediated novel CdSnS2 atom cluster was fabricated using one-pot co-precipitation to address concerns about environmental harm from hazardous organic compounds. The synthesized catalyst showed excellent adsorption and Fenton-like degradation performance on organic compounds such as rose Bengal and methylene blue. The structural and morphological characterization of the material was conducted using various techniques including XRD, SEM, EDAX, FTIR, XPS, TEM, N-2 adsorption, and UV/vis spectrophotometry.
ENVIRONMENTAL SCIENCE-WATER RESEARCH & TECHNOLOGY
(2023)
Article
Chemistry, Physical
Xiaoyu He et al.
Summary: In this work, a new two-dimensional Fe/Ti-BPDC MOF photocatalyst with atomically dispersed Fe sites was synthesized using a dual-benefit design strategy. This catalyst exhibited excellent catalytic performance in visible-light-driven CO2 conversion to HCOOH, achieving a high yield of 703.9 μmol g-1 h-1 with a selectivity greater than 99.7%. The catalyst achieved "dual-optimization" by sustaining the supply of photogenerated electrons and effectively activating CO2. It provided a high proportion of effective photogenerated electrons through a unique electron transfer mechanism and facilitated fast CO2 activation through strong O/Fe affinity.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2023)
Review
Biotechnology & Applied Microbiology
Likun Luan et al.
Summary: Activation and conversion of CO2 into high-value-added products have become a promising approach to address environmental issues. This review comprehensively discusses the integration of enzymatic-electrocatalysis and microbial-electrocatalysis technologies for CO2 reduction, focusing on the electron transfer routes and the compatibility of electrode materials. The combination of solar energy-driven photo-electrochemical techniques with biocatalysis is also explored. The significant findings and future prospects of green and sustainable bioelectrocatalysis for CO2 reduction are highlighted, providing a blueprint for the production of valuable products from CO2 under efficient and mild conditions.
BIOTECHNOLOGY ADVANCES
(2023)
Article
Environmental Sciences
Abdulrahman G. Alhamzani et al.
Summary: Due to the excessive use of fossil fuels, CO2 emissions into the environment are increasing. An efficient method of converting CO2 to useful carbonaceous products in the presence of light is one way to address the issues associated with energy and environmental remediation. In2S3/WS2 heterostructure has been fabricated using the efficient hydrothermal method, exhibiting enhanced photocatalytic activity compared to pristine In2S3 and WS2. The synthesized InS/WS heterostructure also showed high efficiency in degrading parabens under visible radiation.
Review
Environmental Sciences
Ke Guo et al.
Summary: This review discusses the recent breakthroughs in photocatalytic CO2 reduction, focusing on the use of metal-organic frameworks (MOFs) as new catalysts. Various techniques for modifying MOFs and integrating them with other materials have been explored and summarized. The challenges and future prospects of MOFs as photocatalysts for CO2 reduction are also discussed.
JOURNAL OF ENVIRONMENTAL SCIENCES
(2023)
Article
Green & Sustainable Science & Technology
Yuan Lin et al.
Summary: In this study, WO3 nanofibers were modified by in situ growth of freestanding Ni(OH)(2-x) nanosheets with oxygen vacancies, which facilitated charge separation and CO2 reduction. The introduction of Ni(OH)(2-x) induced a built-in electric field at the interface, driving the photogenerated electrons to Ni(OH)(2-x) and achieving spatial charge separation. Additionally, CO2 adsorbed on Ni(OH)(2-x) exhibited apparent molecular activation.
ADVANCED SUSTAINABLE SYSTEMS
(2023)
Article
Chemistry, Physical
A. Naveen Kumar et al.
Summary: La10Si6O27:Tb3+ (1-9 mol%) materials were synthesized and characterized for their photoluminescent, electrochemical, and photocatalytic properties. Even with Tb3+ doping, the materials maintained crystalline and single phases. PL analysis showed tunable emission and maximum intensity at optimized concentration. The La10Si6O27:Tb3+ (9 mol%) electrode demonstrated sensing properties for paracetamol and penegra with an average specific capacitance of 262 Fg(-1). Additionally, the La10Si6O27:Tb3+ (5 mol%) material exhibited photocatalytic activity for the degradation of direct green dyes.
APPLIED SURFACE SCIENCE ADVANCES
(2023)
Article
Chemistry, Physical
Jiafang Liu et al.
Summary: Defect engineering is an effective method to regulate the electronic structure of catalysts in photocatalytic energy conversion. This study successfully synthesized a novel dual-defective In2S3/Zn0.3Cd0.7S (IS/ZCS) heterojunction structure, which exhibited remarkable photocatalytic performance in CO2 reduction and 4-chlorobenzyl alcohol oxidation. The enhanced activity was attributed to the dual-defective structure and Z-scheme transfer mode, providing more active sites and improving the utilization of photogenerated charge carriers.
APPLIED SURFACE SCIENCE
(2023)
Review
Chemistry, Physical
Quanlong Xu et al.
Summary: This review summarizes the recent advances in g-C3N4-based photocatalysts for CO2 reduction. The thermodynamics and dynamics of the CO2 reduction process are discussed, and the modification strategies to enhance the performance of the catalysts are detailed. The intrinsic factors affecting CO2 reduction activity and selectivity are analyzed and the challenges and prospects for future development in this field are presented.
Article
Physics, Multidisciplinary
Indah Raya et al.
Summary: This work investigated the role of microalloying process on the properties of Fe-P-C-based amorphous system. The simultaneous microalloying of Ni and Co was found to enhance the glass forming ability, while FeCoNiCuPC amorphous alloy exhibited the best anelastic/viscoplastic behavior. However, the addition of Cu to improve plasticity led to decreased magnetic properties.
Article
Green & Sustainable Science & Technology
Zuming He et al.
Summary: Semiconductor photocatalytic technology is effective for addressing environmental issues. This study presents a low-cost and environmentally friendly catalyst, namely Z-scheme In2S3/Bi2WO6 core-shell composites. The composites exhibit significantly improved photocatalytic degradation of tetracycline hydrochloride under visible light irradiation. The proposed Z-scheme photocatalytic mechanism and degradation paths offer new approaches for the preparation of core-shell composites with broad applications in environmental remediation.
JOURNAL OF CLEANER PRODUCTION
(2022)
Article
Chemistry, Physical
Jianbo Wang et al.
Summary: The heterojunction photocatalyst composed of nitrogen-deficient carbon nitride and nanosphere ball-flower Indium sulfide exhibits excellent performance in the photocatalytic reduction of CO2, achieving a yield 1.7 times higher than normal carbon nitride. The catalyst also demonstrates good stability after multiple cycles.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2022)
Article
Engineering, Chemical
Xuefang Hu et al.
Summary: This study utilizes molecular dynamics simulation to analyze the behavior of water/Fe3O4 nanofluid in Cu and Pt wall type microchannels. The results indicate that the atomic stability of the system increases by changing the MC type.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS
(2022)
Article
Environmental Sciences
Sushu Zhang et al.
Summary: This review introduces the unique photocatalytic performance of metal sulfide photocatalysts in solar-to-fuel conversion and environmental purification, and discusses strategies to improve their photocatalytic activity and photostability.
Article
Chemistry, Inorganic & Nuclear
Ramachandra Naik et al.
Summary: A promising nanostructure of pure and Ni3+ doped ZnO was prepared using aloe vera gel-assisted solution combustion technique. The electrochemical properties of the doped ZnO were enhanced, exhibiting a significant electrocatalytic effect on the oxidation of ascorbic acid. The doped ZnO also showed potential for the degradation of textile dye pollutants.
INORGANIC CHEMISTRY COMMUNICATIONS
(2022)
Review
Chemistry, Multidisciplinary
Vatika Soni et al.
Summary: Solar illumination is a promising energy source for reducing global warming and cleaning polluted water. Indium sulfide (In2S3) has suitable bandgap for visible light harnessing, but its large-scale application is limited. Improving the performance of In2S3 through synthesis, morphological manipulations, heterojunctions, and doping, can enhance pollutant removal and hydrogen production.
ENVIRONMENTAL CHEMISTRY LETTERS
(2021)
Article
Chemistry, Inorganic & Nuclear
Vijaya V. Shanbhag et al.
Summary: Through the low temperature self-ignited solution combustion synthesis (SCS) method, CaTiO3:Dy3+ and CTDL@SiO2 as well as CaTiO3:Sm3+ and CTSL@SiO2 core-shell nanoparticles were successfully synthesized, showing enhanced electrochemical and photocatalytic properties.
INORGANIC CHEMISTRY COMMUNICATIONS
(2021)
Article
Nanoscience & Nanotechnology
Xin Li et al.
Summary: Efficient electron transmission is crucial in the process of CO2 photoreduction. A multi-interface-contacted In2S3/Au/reduced graphene oxide (rGO) photocatalyst with the fluorescence resonance energy transfer (FRET) mechanism was successfully prepared, showing excellent photoreduction performance. Photoelectrochemical analysis indicated improved carrier transmission efficiency within the catalyst.
ACS APPLIED MATERIALS & INTERFACES
(2021)
Article
Chemistry, Physical
Jun Tan et al.
Summary: A hybrid photocatalyst consisting of MnS and In2S3 nanosheets with hierarchical structures and p-n heterojunctions was successfully prepared using Mn2+-loaded MIL-68(In) submicro-rods as templates, showing a 4-fold higher photocatalytic activity toward CO2 reduction.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2021)
Article
Chemistry, Multidisciplinary
Shuangchao Zhao et al.
Summary: The study developed a hollow In2S3/polymeric carbon nitride heterojunction which showed significantly enhanced photocatalytic activity and proposed a possible photocatalytic mechanism for CO2 reduction.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING
(2021)
Article
Engineering, Chemical
Qingqing Hou et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
(2020)
Review
Chemistry, Physical
Jingjing Zhang et al.
JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY C-PHOTOCHEMISTRY REVIEWS
(2019)
Article
Chemistry, Multidisciplinary
Yanan Wang et al.
JOURNAL OF CO2 UTILIZATION
(2019)
Article
Nanoscience & Nanotechnology
S. Ashwini et al.
JOURNAL OF SCIENCE-ADVANCED MATERIALS AND DEVICES
(2019)
Article
Chemistry, Physical
Yuting Xiao et al.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2018)
Article
Nanoscience & Nanotechnology
K. M. Girish et al.
JOURNAL OF SCIENCE-ADVANCED MATERIALS AND DEVICES
(2018)
Article
Chemistry, Multidisciplinary
Sibo Wang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
(2017)
Article
Chemistry, Applied
Ramachandra Naik et al.
Review
Chemistry, Multidisciplinary
Xiaoxia Chang et al.
ENERGY & ENVIRONMENTAL SCIENCE
(2016)
Article
Chemistry, Physical
Wenwen Gao et al.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2015)
Review
Chemistry, Multidisciplinary
Yi Ma et al.
Review
Chemistry, Analytical
Jindui Hong et al.
ANALYTICAL METHODS
(2013)
