☆ 4.7 Article

Numerical and experimental study on powder deposition mechanism of plasma sprayed YSZ-NiCoCrAlY coating

POWDER TECHNOLOGY (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Coatings & Films

Importance of Measurement and Evaluation Procedure of Particle State in Atmospheric Plasma Spraying

Uros Hudomalj et al.

Summary: This paper explores the importance of measuring in-flight particle state parameters for the evaluation of atmospheric plasma-sprayed coatings. The study emphasizes the significance of the measurement procedure and subsequent data processing in process control applications. Experimental results reveal the need for an appropriate choice of the measurement procedure and demonstrate the possibility of acquiring information about particle state parameters during the coating run. Additionally, the paper shows how different data processing methods impact the evaluation of the acquired particle state parameters.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2023)

Add to Collection

Article Materials Science, Coatings & Films

Simulating Ar/He Plasma Sprays of Metal Particles

Alexander L. L. Brown et al.

Summary: A simulation technique has been developed and characterized for an argon/helium plasma spray with metal particles of 10-100 microns. The study focuses on the behavior of six metals under characteristic flow conditions and the thermal properties of the metals. Injection boundary conditions are determined based on measured nozzle parameters. The model provides a reasonable approximation of nozzle dynamics at low power settings, and uncertainties in the modeling characteristics of the nozzle are evaluated.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Process-Gas Composition on In-Flight and Deposition Characteristics of Atmospheric Plasma-Sprayed Ni Particles

Hansol Kwon et al.

Summary: By simulating and conducting experiments, it was found that the composition of the process gas has a significant impact on the characteristics of the arc plasma and in-flight particles, which in turn affects the coating quality.

METALS AND MATERIALS INTERNATIONAL (2023)

Add to Collection

Article Engineering, Civil

Microstructure, mechanical and thermal properties of YSZ thermal barrier coatings deposited by axial suspension plasma spraying

Olena Poliarus et al.

Summary: Yttrium-stabilized zirconia (YSZ) thermal barrier coatings (TBCs) are essential in turbine propulsion systems. The application of YSZ coatings deposited with atmospheric plasma spraying (APS) is limited due to their inability to withstand frequent thermomechanical loading. However, modifying the plasma spraying process by using nano-structured suspension instead of micrometric powders offers the highest improvement in properties and requires minimal changes in industry procedures.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Numerical and Experimental Study on the Deposition Mechanisms of Plasma Spraying on 7075 Aluminum Alloy

Yu Gu et al.

Summary: The deposition mechanisms of Cr2O3, Al2O3, and Al2O3-40%TiO2 spray coatings onto aluminum alloy substrates were analyzed in this study. The coating morphology, temperature, and stress fields were investigated. It was observed that the sputtering phenomenon and stress within the coating gradually disappeared when the substrate temperature and stress reached a certain level. The thermal effects of the Al2O3 coating were found to be the largest among the investigated materials, while the Cr2O3 and Al2O3-40%TiO2 coatings had relatively smaller thermal effects. The multiparticle deposition model accurately represented the deposition processes.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Oxidation Behaviors of the NiCrAlY Bond Coats in the Thermal Barrier Coatings under External Loads

Chunyu Cheng et al.

Summary: The oxidation behaviors of the NiCrAlY bond coats in the thermal barrier coatings (TBCs) under external loads were investigated through uniaxial tensile and compressive experiments in air at 900 degrees C for 100 h. The experimental results were explained by first-principles simulation. The oxidation rate of the NiCrAlY bond coat was accelerated by external stresses. Different thicknesses of thermally grown oxide (TGO) layers were observed in the NiCrAlY bond coat under different types of stress.

COATINGS (2023)

Add to Collection

Article Engineering, Chemical

Improving the flowability of fine WC-12Co powder using atmospheric pressure nitrogen microwave plasma torch treatment

Geon Woo Yang et al.

Summary: In this study, a nitrogen microwave plasma torch was used to improve the flowability of WC-12Co powder, achieving a significant improvement in flowability and making it suitable for continuous treatment and mass production of plasma spray powders.

POWDER TECHNOLOGY (2023)

Add to Collection

Article Engineering, Manufacturing

Mechanism study on the influence of combustion models and spray gun geometric parameters on high-velocity oxygen-fuel (HVOF) thermal spraying

Xiaoyu Zhao et al.

Summary: HVOF thermal spraying technology has unique advantages for spraying WC-12Co ceramic powder. It is vital to quantitatively reveal the reaction mechanism of combustion components, which optimizes the thermal spraying process and improves the coating quality. The EDC model in the numerical model of HVOF thermal spraying reveals the chemical reaction mechanism of combustion in detail and quantitatively displays the exothermic phenomenon during the spraying process.

JOURNAL OF MANUFACTURING PROCESSES (2023)

Add to Collection

Article Materials Science, Ceramics

Relationship between microstructure and bonding strength of yttria-stabilized zirconia thermal barrier coatings

Can Chen et al.

Summary: Yttria-stabilized zirconia coatings were prepared by atmospheric plasma spraying, and their bonding strength was determined by the proportion of columnar grains and porosity. Higher proportion of columnar grains leads to higher bonding strength, while the presence of small grains reduces bonding strength. Additionally, both holes and cracks in pores linearly affect bonding strength, with holes having the greatest impact.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Thermodynamics

Investigating the in-flight droplets' atomization in suspension plasma-sprayed coating

E. Dalir et al.

Summary: A three-dimensional unsteady numerical model is used to study the atomization of droplets/particles in flight during suspension plasma spraying (SPS). The model incorporates electromagnetic fields, two-way coupled Eulerian-Lagrangian technique, and Kelvin-Helmholtz Rayleigh-Taylor breakup model to simulate droplets' interactions and atomization. The coefficients of the KHRT breakup model are modified for suspension atomization in the SPS process, with nine case studies conducted to investigate the effect of instabilities and liquid core length on atomization. The results show good agreement with existing data.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Add to Collection

Article Materials Science, Multidisciplinary

High-entropy (Y0.2 Gd0.2 Dy0.2 Er0.2 Yb0.2 )2Hf2O7 ceramic: A promising thermal barrier coating material

Longkang Cong et al.

Summary: In this study, a novel high entropy hafnate (Y0.2Gd0.2Dy0.2Er0.2Yb0.2)(2)Hf2O7 was synthesized and characterized for potential use as a thermal barrier coating (TBC) material in gas turbines. The (Y0.2Gd0.2Dy0.2Er0.2Yb0.2)(2)Hf2O7 demonstrated excellent phase stability, chemical compatibility with Al2O3, and lower thermal conductivity compared to other TBC materials. These results suggest that (Y0.2Gd0.2Dy0.2Er0.2Yb0.2)(2)Hf2O7 is a promising candidate for the next generation TBC materials.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Ceramics

Effect of spraying ceramic powder pore structure on thermophysical properties of plasma-sprayed thermal barrier coatings

Ming Yang et al.

Summary: The study investigated the constrained effects of pores on the ceramic top coating of plasma-sprayed lamellar TBCs, showing that the performance and thermal insulation of the coating can be improved by optimizing the powder cooling method.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Materials Science, Coatings & Films

Numerical simulation and parameter sensitivity analysis of multi-particle deposition behavior in HVAF spraying

Xing Gao et al.

Summary: By establishing a particle deposition model and a polycrystalline structure model, the evolution of temperature, strain, and stress fields during particle deposition process was revealed, and the formation mechanism of pore defects was analyzed. The results show that the strain of small particles is larger, while the core strain of large particles is smaller, and the edge strain is significant.

SURFACE & COATINGS TECHNOLOGY (2022)

Add to Collection

Article Engineering, Mechanical

Effect of substrate temperature on the surface and interface properties of NiTi atmospheric plasma sprayed coating

Rakesh Roshan et al.

Summary: Atmospheric plasma spraying is an economical coating process that can be used to apply different high-temperature materials on a substrate to modify its surface properties. NiTi alloy, with its shape memory effect and superelasticity, has gained attention for its ability to protect structural materials from catastrophic failure. This study used APS techniques to coat mild steel at different preheating temperatures and found that NiTi splat formation resulted in better surface bonding and a denser coating.

SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Thermal Barrier Coatings-A State of the Art Review

Jayant Gopal Thakare et al.

Summary: Thermal barrier coatings have advanced significantly since their initial development, and are now widely used in various engineering fields. The focus is on improving the life of the underlying substrate through new materials and deposition techniques. There is high potential for further advancement in thermal barrier coatings, with continuous efforts being made to produce improved and durable coatings.

METALS AND MATERIALS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Coatings & Films

Elevated Temperature Erosion of Plasma Sprayed Thermal Barrier Coating

Bharti Malvi et al.

Summary: This study evaluates the erosion response of yttria-stabilized zirconia (YSZ) thermal barrier coatings under different erosion conditions, showing a brittle erosion response at high temperatures. Generally, the erosion rate of the thermal barrier coating is temperature-independent, but increases with temperature under oblique impact at high velocities.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2021)

Add to Collection

Article Engineering, Manufacturing

A feature-based model for optimizing HVOF process by combining numerical simulation with experimental verification

Jiangzhuo Ren et al.

Summary: The paper introduces an optimization model for high velocity oxygen-fuel (HVOF) thermal spraying technology, using sophisticated numerical simulation methods to analyze flame/particle behaviors. A multidisciplinary theoretical framework has been developed to establish a model covering numerical modeling, analysis, and parameter optimization.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Hot Corrosion Behavior of Micro- and Nanostructured Thermal Barrier Coatings: Conventional Bilayer and Compositionally Graded Layer YSZ

Arezoo Sezavar et al.

Summary: The study examined the hot corrosion behavior of conventional bilayer and compositionally graded layer TBCs in two different micro- and nanostructures. Results showed that the nanostructured bilayer TBC had 2.5 times improved hot corrosion resistance compared to the micro one, and compositionally graded layer TBCs exhibited superior corrosion resistance. Additionally, a combination of compositionally graded layer and nanostructured TBCs resulted in higher corrosion resistance.

OXIDATION OF METALS (2021)

Add to Collection

Article Materials Science, Coatings & Films

Coupled Eulerian-Lagrangian (CEL) simulation of multiple particle impact during Metal Cold Spray process for coating porosity prediction

Xu Song et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Swirling Effects in Atmospheric Plasma Spraying Process: Experiments and Simulation

Israel Martinez-Villegas et al.

COATINGS (2020)

Add to Collection

Article Materials Science, Ceramics

Evolution mechanism of the microstructure and mechanical properties of plasma-sprayed yttria-stabilized hafnia thermal barrier coating at 1400 °C

Chun Li et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Coatings & Films

Deposition and oxidation behavior of atmospheric laminar plasma sprayed Mo coatings from 200 mm to 400 mm under 20 kW: Numerical and experimental analyses

Hui-Yu Zhang et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Physical

Isothermal oxidation and TGO growth behavior of NiCoCrAlY-YSZ thermal barrier coatings on a Ni-based superalloy

Jiaqi Shi et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Materials Science, Ceramics

Investigation of the bond coat interface topography effect on lifetime, microstructure and mechanical properties of air-plasma sprayed thermal barrier coatings

Joao P. Martins et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Add to Collection

Article Materials Science, Coatings & Films

Effects of Interface Bonding on the Residual Stresses in Cold-Sprayed Al-6061: A Numerical Investigation

Enqiang Lin et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Physical

Mechanical properties and thermal cycling behavior of Ta2O5 doped La2Ce2O7 thermal barrier coatings prepared by atmospheric plasma spraying

Hao Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Materials Science, Coatings & Films

Modeling the Evolution of Residual Stresses in Thermally Sprayed YSZ Coating on Stainless Steel Substrate

Ahmed Fardan et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2019)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Thermal Cyclic Fatigue Behavior of Nanostructured YSZ/NiCrAlY Compositionally Graded Thermal Barrier Coatings

Arezoo Sezavar et al.

OXIDATION OF METALS (2019)

Add to Collection

Article Materials Science, Coatings & Films

Oxidation behavior of a nanostructured compositionally graded layer (CGL) thermal barrier coating (TBC) deposited on IN-738LC

Arezoo Sezavar et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Physical

On the design and feasibility of tantalum-base superalloys

E. J. Pickering et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

YSZ/NiCrAlY interface oxidation of APS thermal barrier coatings

Yao Hu et al.

CORROSION SCIENCE (2018)

Add to Collection

Article Engineering, Chemical

Effects of treatment process and nano-additives on the microstructure and properties of Al2O3-TiO2 nanocomposite powders used for plasma spraying

Yong Yang et al.

POWDER TECHNOLOGY (2018)

Add to Collection

Article Acoustics

Effect of substrate preheating treatment on the microstructure and ultrasonic cavitation erosion behavior of plasma-sprayed YSZ coatings

Wen Deng et al.

ULTRASONICS SONOCHEMISTRY (2018)

Add to Collection

Article Thermodynamics

Study on thermal resistance performance of 8YSZ thermal barrier coatings

Yuzhang Wang et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2017)

Add to Collection

Article Materials Science, Coatings & Films

Effect of Particle Size on the Micro-cracking of Plasma-Sprayed YSZ Coatings During Thermal Cycle Testing

Jibo Huang et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2017)

Add to Collection

Article Chemistry, Physical

Numerical analysis of particle impacting and bonding processes during high velocity oxygen fuel spraying process

Jiajing Pan et al.

APPLIED SURFACE SCIENCE (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Processing Parameters on Plasma Jet and In-flight Particles Characters in Supersonic Plasma Spraying

Pei Wei et al.

HIGH TEMPERATURE MATERIALS AND PROCESSES (2016)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Development of a new TBC system for more efficient gas turbine engine application

Satish Tailor et al.

MATERIALS TODAY-PROCEEDINGS (2016)

Add to Collection

Article Engineering, Manufacturing

Empirical modeling for processing parameters' effects on coating properties in plasma spraying process

Zhenhua Wu

JOURNAL OF MANUFACTURING PROCESSES (2015)

Add to Collection

Article Materials Science, Coatings & Films

Influence of Topcoat-Bondcoat Interface Roughness on Stresses and Lifetime in Thermal Barrier Coatings

M. Gupta et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2014)

Add to Collection

Article Materials Science, Coatings & Films

Thermal Shock Resistance of APS 8YSZ Thermal Barrier Coatings on Titanium Alloy

Shuibing Zeng et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2012)

Add to Collection

Article Materials Science, Coatings & Films

Simulation of PYSZ particle impact and solidification in atmospheric plasma spraying coating process

K. Bobzin et al.

SURFACE & COATINGS TECHNOLOGY (2010)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of residual stress on the performance of plasma sprayed functionally graded ZrO2/NiCoCrAlY coatings

KA Khor et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.