☆ 4.7 Article

Numerical simulation of heat and mass transient behavior during WAAM overlapping deposition with external deflection magnetic field

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2024)

Related references

Note: Only part of the references are listed.

Article Automation & Control Systems

Comparative investigation of wire arc additive manufacturing of Al-5%Mg alloy with and without external alternating magnetic field

Wenyong Zhao et al.

Summary: In this investigation, an external longitudinal alternating magnetic field is introduced into the wire arc additive manufacturing system to optimize the fabrication quality of aluminum alloy. The study comprehensively examines the effects of the external magnetic field on the arc behavior, metal transfer, deposit morphology, microstructure, and mechanical properties of the WAAM process. The results show that the excitation current and frequency have significant influences on the process parameters and can improve the surface accuracy and microstructure uniformity of thin-wall parts.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

Add to Collection

Article Engineering, Manufacturing

Microstructure evolution and parameters optimization of follow-up hammering-assisted hybrid wire arc additive manufacturing

Xiaochen Xiong et al.

Summary: In this study, a follow-up hammering-assisted hybrid wire arc additive manufacturing process was proposed to improve the microstructure of deposited weld bead. The results showed that the process could significantly refine the grain size, enhance the strength and hardness of the deposited layers, and improve anisotropy, although it led to a slight reduction in ductility.

JOURNAL OF MANUFACTURING PROCESSES (2022)

Add to Collection

Article Engineering, Manufacturing

Investigation on metal transfer and deposition in micro-plasma arc freeform fabrication controlled by local alternating magnetic field

Yuanyuan Qu et al.

Summary: This study uses a local alternating magnetic field (LAMF) to dynamically control metal transfer, addressing the issues of poor stability, forming accuracy, and limited application range in wire-arc additive manufacturing technology, successfully fabricating metal parts with high forming accuracy.

JOURNAL OF MANUFACTURING PROCESSES (2022)

Add to Collection

Article Engineering, Manufacturing

Metal transfer behavior during CMT-based Wire Arc Additive Manufacturing of Ti-6Al-4V alloy

Siyu Zhou et al.

Summary: CMT-Wire Arc Additive Manufacturing (CMT-WAAM) is a manufacturing method with low heat input and high production efficiency, but the surface geometric accuracy of the fabricated sample, especially for titanium alloy deposition, is inferior. This study analyzed the metal transfer behavior of titanium alloys during CMTWAAM using a high-speed camera to optimize the process parameters. The results showed that a hybrid metal transfer mode occurred in the CMT + P mode, and the impact of I-p1 on droplet diameter was more significant. Additionally, noticeable oxide skin was observed on the surface of the flowing molten pool in the CMT mode. Compared with the CMT mode, new spatter types were generated in the CMT + P mode.

JOURNAL OF MANUFACTURING PROCESSES (2022)

Add to Collection

Article Thermodynamics

Numerical analysis of internal flow of molten pool in pulsed gas tungsten arc welding using a fully coupled model with free surface

Daqing Wang et al.

Summary: This paper introduces a new model to analyze the interaction of arc plasma and internal flow of molten pool in pulsed gas tungsten arc welding. By considering the range of pulsed current and oscillation frequency, and validating the model through experiments, it demonstrates the potential of multiphysics-based simulation methodology.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of ultrasonic peening treatment layer by layer on microstructure of components fabricated by wire and arc additive manufacturing

Yinbao Tian et al.

Summary: Ultrasonic peening treatment layer by layer was used during wire and arc additive manufacturing process of Al alloy to improve the coarse grains. This treatment led to the formation of matrix and transition layer in an Al alloy component, compressing pores and reducing pore diameter, while promoting the formation of equiaxed grain area.

MATERIALS LETTERS (2021)

Add to Collection

Article Engineering, Manufacturing

Molten pool behaviors and forming appearance of robotic GMAW on complex surface with various welding positions

Zeqi Hu et al.

Summary: In the study of robotic GMAW on complex surfaces, the behaviors of molten pool and forming appearance were investigated by developing a computational fluid dynamics model and conducting deposition experiments. It was found that gravity had varying effects on the flow field and forming appearance at different welding positions, with the influence increasing with welding current and surface geometry angles. The findings provide insights into the molten metal forming mechanism on complex surfaces and suggest ways to improve forming appearance.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection

Article Engineering, Manufacturing

Effect of magnetic Field on the microstructure and mechanical properties of inconel 625 superalloy fabricated by wire arc additive manufacturing

Yangfan Wang et al.

Summary: The application of magnetic field during CMT-WAAM process helps to refine the dendritic crystals, suppress segregation, and effectively improve the mechanical properties of Inconel 625 alloy, including hardness, yield strength, ultimate tensile strength, and elongation.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Numerical simulation of coupled arc-droplet-weld pool behaviors during compound magnetic field assisted gas metal arc welding

Lin Wang et al.

Summary: A compound external magnetic field can prevent weld bead defects by controlling metal transfer and arc behaviors, resulting in a more uniform temperature distribution and increased liquid metal flow speed under the action of EMF.

AIP ADVANCES (2021)

Add to Collection

Article Engineering, Mechanical

Investigation of the effect of torch tilt and external magnetic field on arc during overlapping deposition of wire arc additive manufacturing

Xiangman Zhou et al.

Summary: This paper aims to adjust the unsymmetrical arc shape and plasma flow in wire arc additive manufacturing (WAAM) by proposing welding torch tilt deposition and external parallel magnetic field-assisted deposition. The simulations show that certain angles and magnetic flux densities can effectively balance the electric arc and shielding gas. This study provides a theoretical basis and reference for optimizing WAAM process parameters.

RAPID PROTOTYPING JOURNAL (2021)

Add to Collection

Article Thermodynamics

Influence of arc interactions on heat and mass transfer during a two-arc hybrid welding

Ji Chen et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Thermodynamics

Coupled mechanisms of arc, weld pool and weld microstructures in high speed tandem TIG welding

Dongsheng Wu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Thermodynamics

Elucidation of the weld pool convection and keyhole formation mechanism in the keyhole plasma arc welding

Dongsheng Wu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Add to Collection

Article Engineering, Manufacturing

A unified model for coupling mesoscopic dynamics of keyhole, metal vapor, arc plasma, and weld pool in laser-arc hybrid welding

Xin Chen et al.

JOURNAL OF MANUFACTURING PROCESSES (2019)

Add to Collection

Article Physics, Multidisciplinary

Numerical Study on Arc Plasma Behaviors in GMAW with Applied Axial Magnetic Field

Lei Xiao et al.

JOURNAL OF THE PHYSICAL SOCIETY OF JAPAN (2019)

Add to Collection

Article Engineering, Mechanical

Process stability for GTAW-based additive manufacturing

Xiaolong Wang et al.

RAPID PROTOTYPING JOURNAL (2019)

Add to Collection

Editorial Material Engineering, Multidisciplinary

Editorial for Additive Manufacturing

Bingheng Lu

ENGINEERING (2019)

Add to Collection

Article Thermodynamics

Investigation of heat transfer and fluid flow in high current GTA welding by a unified model

Xinxin Wang et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)

Add to Collection

Article Automation & Control Systems

Effect of in-process active cooling on forming quality and efficiency of tandem GMAW-based additive manufacturing

Junbiao Shi et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

Add to Collection

Article Thermodynamics

Numerical analysis of heat transfer and fluid flow in multilayer deposition of PAW-based wire and arc additive manufacturing

Xingwang Bai et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection

Article Thermodynamics

Study of mass transport in cold wire deposition for Wire Arc Additive Manufacturing

Fatemeh Hejripour et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection

Article Thermodynamics

Three-dimensional numerical simulation of arc and metal transport in arc welding based additive manufacturing

Xiangman Zhou et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

Add to Collection

Article Engineering, Industrial

Numerical analysis of undercut defect mechanism in high speed gas tungsten arc welding

Xiangmeng Meng et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)

Add to Collection

Article Thermodynamics

Numerical analysis of the coupled arc-weld pool-keyhole behaviors in stationary plasma arc welding

Xiaoxia Jian et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A multi-bead overlapping model for robotic wire and arc additive manufacturing (WAAM)

Donghong Ding et al.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2015)

Add to Collection

Article Automation & Control Systems

Impacts of external longitudinal magnetic field on arc plasma and droplet during short-circuit GMAW

Yun Long Chang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Modeling of bead section profile and overlapping beads with experimental validation for robotic GMAW-based rapid manufacturing

Jun Xiong et al.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of droplets in gas-metal arc welding: new modelling approach, and application to welding of aluminium

A. B. Murphy

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2013)

Add to Collection

Proceedings Paper Chemistry, Physical

Electromagnetically confined weld-based additive manufacturing

X. W. Bai et al.

PROCEEDINGS OF THE SEVENTEENTH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM) (2013)

Add to Collection

Article Engineering, Manufacturing

Modeling Three-Dimensional Plasma Arc in Gas Tungsten Arc Welding

G. Xu et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2012)

Add to Collection

Article Thermodynamics

Modeling of the transport phenomena in GMAW using argon-helium mixtures. Part I - The arc

Z. H. Rao et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)

Add to Collection

Article Thermodynamics

Modeling of the transport phenomena in GMAW using argon-helium mixtures. Part II - The metal

Z. H. Rao et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)

Add to Collection

Article Physics, Applied

Three-dimensional modeling of transport phenomena and their effect on the formation of ripples in gas metal arc welding

Z. H. Rao et al.

JOURNAL OF APPLIED PHYSICS (2010)

Add to Collection

Article Thermodynamics

Three-dimensional modeling of arc plasma and metal transfer in gas metal arc welding

G. Xu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)

Add to Collection

Article Thermodynamics

Modeling of transport phenomena in hybrid laser-MIG keyhole welding

J. Zhou et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2008)

Add to Collection

Article Physics, Applied

Three-dimensional modeling of the plasma arc in arc welding

G. Xu et al.

JOURNAL OF APPLIED PHYSICS (2008)

Add to Collection

Article Thermodynamics

Heat and mass transfer in gas metal arc welding. Part I: The arc

J. Hu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2007)

Add to Collection

Article Thermodynamics

Heat and mass transfer in gas metal arc welding. Part II: The metal

J. Hu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2007)

Add to Collection

© Peeref 2019-2024. All rights reserved.