4.6 Article

Enriched photocatalytic and photoelectrochemical activities of a 2D/0D g-C3N4/CeO2 nanostructure

Related references

Note: Only part of the references are listed.
Article Engineering, Chemical

Construction of Z-scheme heterojunction based on BiOBr-nanoflakes embedded sulfonic-acid-functionalized g-C3N4 for enhanced photocatalytic removal of hazardous pollutants in aqueous media

Harikrishnan Venkatesvaran et al.

Summary: In this study, nano-flake-like bismuth oxybromide embedded sulfonic acid-functionalized graphitic carbon nitride (BiOBr-NFs/g-C3N4-SAF) was successfully prepared through surface modification and heterojunction formation. The photocatalyst exhibited excellent catalytic activity for both photooxidation and photoreduction reactions, with remarkable performance in the degradation of Cr(VI) and RhB.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2023)

Article Engineering, Chemical

A novel adsorptive and photocatalytic system for dye degradation using ZIF-8 derived carbon (ZIF-C)-modified graphene oxide nanosheets

Mengjie Qiu et al.

Summary: By incorporating ZIF-8 and graphene oxide (GO) into cellulose-based carbon aerogel (CCA), the adsorption and photocatalytic efficiency can be enhanced. The ZIF-GO/CCA exhibits a high specific surface area and superior photocatalytic activity, and it is also recyclable.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2023)

Article Chemistry, Physical

Effect of Pd-Doping Concentrations on the Photocatalytic, Photoelectrochemical, and Photoantibacterial Properties of CeO2

Shaidatul Najihah Matussin et al.

Summary: CeO2 and Pd-CeO2 NPs were synthesized using the microwave-assisted synthesis method. It was found that Pd-CeO2 NPs exhibited enhanced photocatalytic and photoantibacterial activities under visible light irradiation.

CATALYSTS (2023)

Article Materials Science, Ceramics

3D/2D ZnIn2S4/BiFeO3 as S-scheme heterojunction photocatalyst for boosted visible-light hydrogen evolution

Dafeng Zhang et al.

Summary: A ZnIn2S4/BiFeO3 heterojunction photocatalyst with a 3D/2D structure was designed and prepared, and a typical 3D/2D structure with intimate interface was obtained, providing more active sites and boosting the migration of photogenerated charges. The optimal mass ratio of BiFeO3 in ZnIn2S4/BiFeO3 was determined to be 10%, which achieved a 10.5-fold increase in H-2 evolution rate compared to pure ZnIn2S4. The ZnIn2S4/BiFeO3 composite exhibited excellent recyclability and structural stability based on cycling experiment, and a S-scheme heterojunction mechanism was revealed.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2023)

Article Chemistry, Physical

Achieving improved full-spectrum responsive 0D/3D CuWO4/BiOBr:Yb3+, Er3+ photocatalyst with synergetic effects of up-conversion, photothermal effect and direct Z-scheme heterojunction

Xintong Yao et al.

Summary: This study designed and synthesized a full-spectrum responsive CuWO4/BiOBr:Yb3+,Er3+ composite material to solve the problem of photocatalysts by increasing the efficiency of light energy conversion. The best degradation performance was achieved by 5% CuWO4/BiOBr:Yb3+,Er3+ under visible and near-infrared light, with tetracycline removal rates of 93.9% in 60 min and 69.4% in 12 h, respectively, which was 5.2 and 3.3 times higher than that of BiOBr:Yb3+,Er3+. The improved photoactivity was attributed to the up-conversion effect, photothermal effect, and direct Z-scheme heterojunction. The photocatalyst also exhibited excellent photostability in cycle degradation experiments, offering a promising technique for designing and synthesizing full-spectrum photocatalysts.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

Article Chemistry, Multidisciplinary

Oxidative desulfurization of dibenzothiophene over highly dispersed Mo-doped graphitic carbon nitride

Diogo A. F. Goncalves et al.

Summary: In this study, Mo-doped graphitic carbon nitride was successfully prepared and exhibited exceptional catalytic activity in the oxidative desulfurization reaction. The catalytic properties of Mo/g-C3N4 were influenced by catalyst dosage, O/S ratio, and temperature. Kinetic studies showed a pseudo-first-order reaction with a low apparent activation energy for DBT oxidation. Additionally, the Mo/g-C3N4 catalyst exhibited poor stability as catalytically active Mo species were leached from the catalyst structure, leading to catalyst deactivation.

CHEMICAL PAPERS (2022)

Article Chemistry, Multidisciplinary

Preparation of graphitic carbon nitride g-C3N4-HMCM-22 composite catalysts and enhanced para-selectivity in m-xylene isomerization

Zonghui Liu et al.

Summary: A series of novel g-C3N4-HMCM-22 composite catalysts were successfully prepared and characterized. The introduction of g-C3N4 was found to improve the selectivity in m-xylene isomerization, with the G1H1 composite catalyst showing the highest selectivity. The study suggests that increasing the number of Lewis acid sites and inhibiting the external Bronsted acid sites of HMCM-22 are crucial for improving the selectivity.

CHEMICAL PAPERS (2022)

Article Chemistry, Multidisciplinary

Enhanced visible light photocatalytic CO2 reduction over direct Z-scheme heterojunction Cu/P co-doped g-C3N4@TiO2 photocatalyst

Mohammad Hasan Foghani et al.

Summary: The study demonstrates that phosphorus and copper co-doped g-C3N4/TiO2 heterostructures exhibit enhanced photocatalytic activity and production yield in CO2 reduction, by extending light absorption range, lowering band gap energy, and suppressing charge carriers' recombination. Additionally, they show excellent stability and recyclability in the reaction process.

CHEMICAL PAPERS (2022)

Article Engineering, Chemical

S-scheme g-C3N4/ZnO heterojunction photocatalyst with enhanced photodegradation of azo dye

Ju-Ting Lee et al.

Summary: This study successfully addressed the limitations of g-C3N4, including its low specific surface area and high charge recombination rate, by developing a g-C3N4/ZnO S-scheme heterojunction photocatalyst. The optimized catalyst exhibited excellent decolorization performance for dye degradation.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2022)

Article Chemistry, Multidisciplinary

Iron oxide clusters on g-C3N4 promote the electron-hole separation in photo-Fenton reaction for efficient degradation of wastewater

Yu Fan et al.

Summary: By integrating trinuclear iron clusters onto graphitic carbon nitride nanosheets, the efficiency of photo-Fenton synergistic catalytic degradation of pollutants can be improved, and it can still function effectively under high salinity conditions.

CHEMICAL PAPERS (2022)

Article Engineering, Chemical

Synthesis of O-doped C3N4 decorated with C3N4 quantum dots: Construction of a homo junction photocatalyst for the enhanced photocatalytic degradation of tetracycline

Yanpeng Liu et al.

Summary: This study successfully constructed a homo junction photocatalyst through energy band engineering, effectively adjusting the internal electric field intensity and improving the separation efficiency of photoexcited charge carriers, consequently significantly enhancing the photocatalytic performance.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2022)

Article Engineering, Chemical

Low-frequency acoustic irradiation coupled photocatalytic degradation of dye pollutant using LaNi0.5Co0.5O3/g-C3N4 nanocatalyst

Madappa C. Maridevaru et al.

Summary: Sonophotocatalysis is an effective energy transfer approach for wastewater treatment. The study fabricates a series of LaNi0.5Co0.5O3/g-C3N4 Z-scheme catalysts with varying amounts of g-C3N4, showcasing improved catalytic activity through enhanced visible light absorption and separation of photogenerated electron-hole pairs. The nanohybrids demonstrated optimal degradation of Congo Red dye, highlighting the potential of LaNi0.5Co0.5O3/g-C3N4 as an efficient catalyst for environmental remediation.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2022)

Review Environmental Sciences

Simultaneous removal of organics and heavy metals from industrial wastewater: A review

Timothy O. Ajiboye et al.

Summary: The co-existence of heavy metals and organics in industrial effluents poses potential health risks and ecological harm, necessitating the simultaneous removal of these pollutants. Technologies such as adsorption, ion exchange, photo-catalysis, and coagulation have been used for this purpose, with their success dependent on water matrices and treatment media. This review critically examines the advantages, limitations, and mathematical modeling of these technologies for concurrent removal of organics and heavy metals in contaminated systems.

CHEMOSPHERE (2021)

Article Engineering, Environmental

Near-infrared-activated Z-scheme NaYF4:Yb/Tm@Ag3PO4/Ag@g-C3N4 photocatalyst for enhanced H2 evolution under simulated solar light irradiation

G. Murali et al.

Summary: The study introduces a synthesis strategy to produce NaYF4:Yb/Tm@Ag3PO4/Ag@g-C3N4 architectures responsive to full-spectrum solar light, which exhibit enhanced photocatalytic H2 evolution rate compared to other photocatalysts. The unique synthesis approach and highlighted photocatalytic mechanisms have implications for designing highly efficient UC-based broadband photocatalysts for harvesting full-spectrum solar energy.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Electrical & Electronic

Z-scheme g-C3N4/Fe2O3 for efficient photo-oxidation of benzylamine under mild conditions

Yefeng Chen et al.

Summary: This study synthesized a Z-scheme carbon nitride (CM)-Fe2O3 heterojunction photocatalyst with efficient photocatalytic activity in the selective oxidation of benzylamine to N-benzylidene benzylamine. The catalyst showed high selectivity and conversion rate under ambient air and room temperature, with a turnover frequency value superior to previous heterogeneous photocatalysts. The enhanced absorption of visible light and improved carrier separation and migration rate, along with a Z-scheme mechanism, contributed to the excellent catalytic activity of the modified CM material for promoting the photocatalytic conversion of solar-driven organics.

SEMICONDUCTOR SCIENCE AND TECHNOLOGY (2021)

Article Chemistry, Physical

Enhanced charges separation to improve hydrogen production efficiency by organic piezoelectric film polarization

Dafeng Zhang et al.

Summary: The study demonstrated the potential of using piezoelectric materials in improving photoinduced charges separation and synthesized flexible composite films with enhanced performance. The experimental results showed that the polarization field generated by piezoelectric materials effectively improved charge separation, leading to improved photocatalytic H-2 evolution performance, providing an efficient strategy to remarkably enhance photocatalysts activity.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Materials Science, Multidisciplinary

A novel Z-scheme CeO2/g-C3N4 heterojunction photocatalyst for degradation of Bisphenol A and hydrogen evolution and insight of the photocatalysis mechanism

Wei Zhao et al.

Summary: CeO2/g-C3N4 heterojunction photocatalyst exhibited high catalytic performance for photocatalytic hydrogen generation and photocatalytic oxidation of BPA under visible light irradiation. The enhanced catalytic activity was attributed to effective interfacial charge migration and separation. The heterojunction photocatalyst may follow a more suitable Z-scheme charge transfer mechanism, as confirmed by experimental and theoretical analysis.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Multidisciplinary Sciences

Molybdenum impregnated g-C3N4 nanotubes as potentially active photocatalyst for renewable energy applications

Naseer Iqbal et al.

Summary: Molybdenum impregnated g-C3N4 nanotubes, fabricated through a thermal/hydrothermal process, exhibit enhanced photoelectrochemical properties for solar-driven water-splitting reactions. The nanotubes show nanocrystalline triazine-based g-C3N4 morphology with high sp(2)-hybridized nitrogen content and metallic/oxidized Mo nanoparticles impregnated. The composite material displays high photocurrent efficiency and low charge transfer resistance, making it a promising photocatalytic material for viable solar-driven water splitting.

SCIENTIFIC REPORTS (2021)

Review Chemistry, Physical

The nonmetal modulation of composition and morphology of g-C3N4-based photocatalysts

Fang He et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2020)

Review Chemistry, Physical

Carbon-based photocatalysts for enhanced photocatalytic reduction of CO2 to solar fuels

Mufeedah Muringa Kandy

SUSTAINABLE ENERGY & FUELS (2020)

Review Chemistry, Multidisciplinary

Dye-sensitized graphitic carbon nitride (g-C3N4) for photocatalysis: a brief review

Nuonuo Zhang et al.

CHEMICAL PAPERS (2020)

Article Chemistry, Multidisciplinary

Enhanced Visible-Light-Induced Photoactivity of Type-II CeO2/g-C3N4 Nanosheet toward Organic Pollutants Degradation

Ran Ma et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Article Materials Science, Multidisciplinary

Synthesis of g-C3N4/N-doped CeO2 composite for photocatalytic degradation of an herbicide

Mohan Kumar Kesarla et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

Article Chemistry, Physical

Synthesis, Structure and Electronic Properties of Graphitic Carbon Nitride Films

Theo Suter et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2018)

Article Chemistry, Inorganic & Nuclear

Controllable synthesis of CeO2/g-C3N4 composites and their applications in the environment

Xiaojie She et al.

DALTON TRANSACTIONS (2015)

Article Engineering, Environmental

Synergistic collaboration of g-C3N4/SnO2 composites for enhanced visible-light photocatalytic activity

Yipeng Zang et al.

CHEMICAL ENGINEERING JOURNAL (2014)