☆ 4.6 Article

Tunable optical and structural characteristics with improved electrical properties of (PVA-GO-CuO) eco-friendly-polymer nanocomposites and their DFT study

DIAMOND AND RELATED MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Polymer Science

Investigation of some physical properties of Rochelle salt/polymer composite for flexible electronic applications

Eman O. Taha et al.

Summary: This research investigates the properties of Rochelle salt-doped polyvinyl alcohol composite, including structural, optical, electrical, and mechanical properties. The results show that doping RS changes the crystalline nature of PVA and confirms the interaction and miscibility between PVA and RS. The optical, electrical, and mechanical properties of the RS-doped PVA composites are greatly influenced by the RS concentrations.

POLYMER BULLETIN (2023)

Add to Collection

Article Optics

Oxygen vacancy driven luminescence, ferromagnetic and electronic structure properties of Eu doped CeO2 nanoparticles

N. S. Leel et al.

Summary: Nanoparticles of CeO2 and rare-earth cation Eu-doped Ceria Ce1-xEuxO2 (x = 0.03, 0.05, and 0.07) were prepared by chemical co-precipitation route and investigated for their various properties. The doped nanoparticles showed strain and phase maintained structures, with crystallite sizes between 13 and 26 nm. X-ray Photoelectron Spectroscopy analyses confirmed the replacement of Ce with Eu in different oxidation states, as well as the correlation between oxygen vacancies and Eu doping concentration. The formation of complexes involving host and doped cations, mediated by oxygen vacancies, indicated the presence of F0, F+, and F2+ centres.

JOURNAL OF LUMINESCENCE (2023)

Add to Collection

Article Engineering, Environmental

Enhanced energy storage performance of polymer nanocomposites using hybrid 2D ZnO@MoS2 semiconductive nano-fillers

Fei Wen et al.

Summary: This article presents the fabrication of hybrid semiconductive nanofillers using MoS2 two-dimensional nanosheets and ZnO zero-dimensional nanoparticles in different ratios, and the preparation of P(VDFCTFE-DB)/ZnO@MoS2 composites. The composites with hybrid fillers exhibit optimized discharged energy density and efficiency, showing significant impact on the polymer matrix.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Materials Science, Composites

Improving the damping properties of carbon fiber reinforced polymer composites by interfacial sliding of oriented multilayer graphene oxide

Luyang Gong et al.

Summary: This paper investigates the effect of two-dimensional multilayer graphene oxide (GO) on the damping properties of carbon fiber reinforced polymer (CFRP) composites, and demonstrates that the deposition of GO on the surface of carbon fibers can significantly enhance the damping properties of CFRPs.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Recent advances in polymers and polymer composites for food packaging

Mingyue Zhang et al.

Summary: Food packaging plays a crucial role in ensuring food safety. This review summarizes recent advances in polymer and polymer composites used in food packaging, including research progress on biodegradable polymers and the applications of polymer composites in improved, active, and intelligent packaging.

MATERIALS TODAY (2022)

Add to Collection

Article Polymer Science

3D Printing and Shaping Polymers, Composites, and Nanocomposites: A Review

M. N. M. Azlin et al.

Summary: Sustainable technologies, such as 3D printing, have gained significant attention from researchers and investors. The development of technology has changed the methods for product development, and 3D printing technology has made tremendous progress.

POLYMERS (2022)

Add to Collection

Article Biochemistry & Molecular Biology

The Functional and Application Possibilities of Starch/Chitosan Polymer Composites Modified by Graphene Oxide

Magdalena Krystyjan et al.

Summary: This study investigates the functional properties and degradation rate of bionanocomposites made of starch/chitosan/graphene oxide (GO) using a green synthesis method. It also explores the toxicity and effects on pathogenic microflora during storage of meat food products. The results indicate that the composites have weak barrier properties but are similar to biological systems. Chitosan-containing composites demonstrate good optical properties and high barrier performance, making them suitable for packaging applications. Additionally, the starch and chitosan films show relatively high biodegradability, lack toxicity, and provide a high barrier against many microorganisms, suggesting great potential for use in the food industry.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2022)

Add to Collection

Review Food Science & Technology

Recent advances in biobased and biodegradable polymer nanocomposites, nanoparticles, and natural antioxidants for antibacterial and antioxidant food packaging applications

Italo Rennan Sousa Vieira et al.

Summary: Inorganic nanoparticles and natural antioxidant compounds as emerging trends in the food industry have shown potential in active food packaging applications. By incorporating them into biobased and biodegradable matrices, such as polysaccharides and proteins, these substances offer significant antimicrobial, antioxidant, UV blocking, oxygen scavenging, and water vapor permeability effects with low environmental impact. However, there are concerns about the migration and toxicological potential of metal NPs in food contact packaging.

COMPREHENSIVE REVIEWS IN FOOD SCIENCE AND FOOD SAFETY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Exploration of spectroscopic, surface morphological, structural, electrical, optical and mechanical properties of biocompatible PVA-GO PNCs

S. B. Dangi et al.

Summary: This study focuses on the preparation of PVA-GO nanocomposite films using a simple solution mixing technique and explores their spectroscopic, structural, optical, electrical, and mechanical properties. Various analytical techniques were employed to investigate the effects of GO on the composite materials, revealing an enhancement in properties due to the presence of nanofillers.

DIAMOND AND RELATED MATERIALS (2022)

Add to Collection

Review Chemistry, Analytical

Graphene-Based Polymer Composites for Flexible Electronic Applications

Ana M. Diez-Pascual et al.

Summary: Graphene-based nanomaterials have gained significant interest in the field of flexible electronics due to their exceptional electrical, mechanical, and optoelectronic properties, as well as their potential for surface modification. Their flexibility and processability make them highly suitable for electronic devices that require bending, folding, and stretching, which cannot be achieved by conventional electronics.

MICROMACHINES (2022)

Add to Collection

Review Engineering, Multidisciplinary

Material Design for Enhancing Properties of 3D Printed Polymer Composites for Target Applications

Vinita V. Shinde et al.

Summary: This article introduces different materials used for 3D printing of polymer composites to enhance their mechanical properties and prolong their lifespan. It also discusses the use of polymer materials for 3D printing flexible energy-storage devices and as a platform for bioengineering and earth science applications.

TECHNOLOGIES (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Structural Changes from Conventional SrSnO3 to Ruddlesden-Popper Sr2SnO4 Perovskites and Its Implication on Photoluminescence and Optoelectronic Properties

Santosh Kumar Gupta et al.

Summary: This study investigates the symmetrical changes in perovskite structures and their effects on the photoluminescence of Eu3+. The results show that the Ruddlesden-Popper perovskite structure is more distorted compared to the conventional perovskite structure, resulting in different emission spectra of Eu3+. Moreover, the Ruddlesden-Popper perovskite structure has higher defect and oxygen vacancy concentrations, leading to better charge transfer and capacitance performance.

ACS APPLIED ELECTRONIC MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of Sm doping on structural, ferroelectric, electrical, optical and magnetic properties of BaTiO3

Anju Kumari et al.

Summary: In this study, the properties of Sm-doped BaTiO3 ceramics were investigated, revealing enhanced spontaneous polarization, high dielectric constant, and semiconductor nature for the Sm-BTO samples, which can be utilized in visible range photon harvesting devices. The magnetic measurements also suggested ferromagnetic ordering at room temperature. Overall, the findings indicate that the properties of BTO ferroelectric ceramic can be modulated through Sm doping.

VACUUM (2021)

Add to Collection

Review Environmental Sciences

Chitin and Chitosan Based Composites for Energy and Environmental Applications: A Review

Sherin Peter et al.

Summary: Chitin and chitosan are abundant natural biopolymers with unique properties, such as low density, high porosity, renewability, and biodegradability. They have the potential to be successful alternatives for energy and environmental applications, but their poor mechanical and thermal properties limit their widespread use.

WASTE AND BIOMASS VALORIZATION (2021)

Add to Collection

Review Mechanics

Polymer composite materials: A comprehensive review

Rachid Hsissou et al.

Summary: In this review, advanced composite materials based on thermoplastic polymers, elastomer polymers, and thermosetting polymers were comprehensively developed and investigated, with a focus on the synthesis of various macromolecular matrices. These composite materials exhibited excellent mechanical performances, high thermal resistance, good fire behavior, high impact resistance, best abrasion resistance, exceptional electric insulation, and good rigidity, making them a promising material for various applications. Additionally, detailed examination and discussion of composite materials formulation were provided in this review.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Optical and electrical properties of biocompatible and novel (CS-GO) polymer nanocomposites

Vimala Dhayal et al.

Summary: This paper aims to provide information on the optical and electrical characteristics of CS-GO PNCs, and the variation of GO nano-filler has a direct impact on the properties of the nanocomposites. The optical band gap of the nanocomposite decreases with increasing wt% of GO, while electrical properties such as dielectric constant, dissipation factor, and electrical conductivity increase.

OPTICAL AND QUANTUM ELECTRONICS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Rational design of two-dimensional nanofillers for polymer nanocomposites toward multifunctional applications

Xi Shen et al.

Summary: Nanocomposites of 2D nanostructured fillers embedded in a polymer matrix offer ample opportunities for designing multifunctional materials with exceptional properties. Rational assembly of various 2D materials with controlled structures enables the creation of composites with tailored properties for novel applications. Advanced synthesis and assembly techniques, along with multiscale structural characteristics, are key for developing composites with multifunctional properties across different scales for emerging applications.

PROGRESS IN MATERIALS SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of La doping on structure, AC conductivity and impedance spectroscopy of Ba2SnO4 Ruddlesden Popper oxide

Upendra Kumar et al.

Summary: Several compositions of (Ba1-xLax)(2)SnO4 have been prepared via solid-state ceramic route, with the solubility limit of La at Ba-site reconfirmed. The samples exhibit Arrhenius type charge transport and invariant conduction mechanism. Impedance spectroscopy studies reveal the major contribution of grain in the conduction and relaxation processes.

MATERIALS CHEMISTRY AND PHYSICS (2021)

Add to Collection

Review Polymer Science

Durability of Biodegradable Polymer Nanocomposites

Tatjana Glaskova-Kuzmina et al.

Summary: Biodegradable polymers (BP) are considered the materials of the future, with excellent properties comparable to commodity plastics. The lack of data on the durability of biodegradable polymer nanocomposites (BPN) has prompted a review summarizing recent literature data on environmental aging of BPN. Incorporating nanofillers into BP can improve durability, but poor dispersion may lead to faster degradation. Selected models describing the durability performance of BPN can be used to design materials with tailored degradation properties and durability.

POLYMERS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Recent developments for antimicrobial applications of graphene-based polymeric composites: A review

Nabira Fatima et al.

Summary: Graphene-based polymeric composites exhibit excellent antimicrobial properties through physical and chemical damages, with applications in wound bandages, antimicrobial coatings, drug delivery, food packaging, hydrogel formation, and water disinfection. This review provides valuable insights and may stimulate further developments in the promising field of graphene-based materials.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2021)

Add to Collection

Article Polymer Science

Eco-friendly polymer nanocomposites designed for self-healing applications

Liberata Guadagno et al.

Summary: The study investigated fully biodegradable self-healing nanocomposites prepared by mixing carbon nanotubes-based carboxyl methyl cellulose with a commercial biodegradable polymer. Results showed temperature-dependent behavior in recovery of Storage Modulus, with improved mechanical properties due to the presence of CNTs-based CMC, and maximum healing efficiency observed between 30 and 80 degrees Celsius.

POLYMER (2021)

Add to Collection

Review Polymer Science

Fabrication, Functionalization, and Application of Carbon Nanotube-Reinforced Polymer Composite: An Overview

Norizan Mohd Nurazzi et al.

Summary: This article introduces the current research status and application prospects of a novel class of nanomaterials composed of carbon nanotubes, emphasizing the potential uses of CNT-reinforced polymer composites in multiple fields. The article also reviews the research on CNT-reinforced polymer composites under current covalent and non-covalent functionalization, and discusses the mechanisms related to mechanical, thermal, and electrical performance.

POLYMERS (2021)

Add to Collection

Review Chemistry, Physical

Fabrication, mechanisms and perspectives of conductive polymer composites with multiple interfaces for electromagnetic interference shielding: A review

Ming Wang et al.

Summary: This paper discusses the importance of EMI shielding materials in modern society, the drawbacks of metal-based materials, and the advantages of conductive polymer composites. The focus is on how CPC with multiple interfaces can enhance EMI shielding effectiveness.

CARBON (2021)

Add to Collection

Article Nanoscience & Nanotechnology

MoS2: Advanced nanofiller for reinforcing polymer matrix

A. S. Sethulekshmi et al.

Summary: The discovery and application of graphene has expanded the research on other 2D materials, with molybdenum disulfide (MoS2) being an important material with excellent properties. MoS2 nanocomposites are gaining research interest due to their outstanding reinforcement ability, showing promising future applications.

PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES (2021)

Add to Collection

Article Materials Science, Ceramics

Engineering the optical properties of Cu doped CeO2 NCs for application in white LED

Kavita Kumari et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Review Nanoscience & Nanotechnology

Polymer Matrix Nanocomposites with 1D Ceramic Nanofillers for Energy Storage Capacitor Applications

Haibo Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Structure, microstructure, optical and photocatalytic properties of Mn-doped ZnO nanoparticles

S. D. Senol et al.

MATERIALS RESEARCH EXPRESS (2020)

Add to Collection

Article Spectroscopy

Tailoring the structural, electronic structure and optical properties of Fe: SnO2 nanoparticles

Shalendra Kumar et al.

JOURNAL OF ELECTRON SPECTROSCOPY AND RELATED PHENOMENA (2020)

Add to Collection

Article Materials Science, Composites

Structural, optical, and surface morphological studies of ethyl cellulose/graphene oxide nanocomposites

Kamal Kumar Khichar et al.

POLYMER COMPOSITES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Spectroscopic studies, molecular structure optimization and investigation of structural and electrical properties of novel and biodegradable Chitosan-GO polymer nanocomposites

Vimala Dhayal et al.

JOURNAL OF MATERIALS SCIENCE (2020)

Add to Collection

Article Engineering, Chemical

Synthesis and physical properties of nanopowder and electrical properties of bulk samples of ZnFe2-xNixO4 (x: 0, 0.05, 0.10)

Harshpreet Cheema et al.

ADVANCED POWDER TECHNOLOGY (2020)

Add to Collection

Article Multidisciplinary Sciences

Delving into the properties of polymer nanocomposites with distinctive nano-particle quantities, for the enhancement of optoelectronic devices

Nafeesah Yaqub et al.

HELIYON (2020)

Add to Collection

Article Materials Science, Biomaterials

Biocompatible chitosan-based composites with properties suitable for hyperthermia therapy

Ana Barra et al.

JOURNAL OF MATERIALS CHEMISTRY B (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Band gap engineering, electronic state and local atomic structure of Ni doped CeO2 nanoparticles

Kavita Kumari et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)

Add to Collection

Article Spectroscopy

Investigation of local geometrical structure, electronic state and magnetic properties of PLD grown Ni doped SnO2 thin films

Mayuri Sharma et al.

JOURNAL OF ELECTRON SPECTROSCOPY AND RELATED PHENOMENA (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Role of Fe-Doping on Structural, Optical and Magnetic Properties of SnO2 Nanoparticles

Mayuri Sharma et al.

JOURNAL OF ELECTRONIC MATERIALS (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Novel of (polymer blend-Fe3O4) magnetic nanocomposites: preparation and characterization for thermal energy storage and release, gamma ray shielding, antibacterial activity and humidity sensors applications

Ahmed Hashim et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)

Add to Collection

Article Materials Science, Ceramics

Structural, magnetic and dielectric properties of Cr substituted yttrium iron garnets

Aakansha et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2018)

Add to Collection

Article Electrochemistry

Effect of Graphene Oxide Thin Film on Growth and Electrochemical Performance of Hierarchical Zinc Sulfide Nanoweb for Supercapacitor Applications

Muhammad F. Iqbal et al.

CHEMELECTROCHEM (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Strain and grain size of TiO2 nanoparticles from TEM, Raman spectroscopy and XRD: The revisiting of the Williamson-Hall plot method

Pierre M. Kibasomba et al.

RESULTS IN PHYSICS (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Hybrid Solid Polymer Electrolytes with Two-Dimensional Inorganic Nanofillers

Stephanie Chua et al.

CHEMISTRY-A EUROPEAN JOURNAL (2018)

Add to Collection

Article Polymer Science

A novel polymer composite with a small optical band gap: New approaches for photonics and optoelectronics

Shujahadeen B. Aziz et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2017)

Add to Collection

Article Optics

Optical and electrical characterization of ZnO/CuO heterojunction solar cells

Sajad Hussain et al.

OPTIK (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Corrosion study of the graphene oxide and reduced graphene oxide-based epoxy coatings

Faizan Ali Ghauri et al.

MATERIALS RESEARCH EXPRESS (2017)

Add to Collection

Article Chemistry, Physical

Anatase TiO2 nanocrystals anchored at inside of SBA-15 mesopores and their optical behavior

M. M. Araujo et al.

APPLIED SURFACE SCIENCE (2016)

Add to Collection

Review Polymer Science

Biodegradable polymer nanocomposites: An overview

Sarang S. Bari et al.

POLYMER REVIEWS (2016)

Add to Collection

Article Engineering, Environmental

Synthesis, structural refinement and optical behavior of CaTiO3 powders:: A comparative study of processing in different furnaces

L. S. Cavalcante et al.

CHEMICAL ENGINEERING JOURNAL (2008)

Add to Collection

Article Chemistry, Multidisciplinary

6-31G*basis set for third-row atoms

VA Rassolov et al.

JOURNAL OF COMPUTATIONAL CHEMISTRY (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.