☆ 4.6 Article

Understanding of chemical looping with autothermal operation

CURRENT OPINION IN CHEMICAL ENGINEERING (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Applied

Recent progress in the development of synthetic oxygen carriers for chemical looping combustion applications

Amr Abdalla et al.

Summary: Continuing increase in atmospheric CO2 concentrations has had significant negative impacts on the environment, prompting research efforts to find alternative energy sources to replace fossil fuels. Chemical looping combustion (CLC) has emerged as a promising technology for CO2 capture, and the development of efficient oxygen carriers is crucial for its success. This work provides a comprehensive overview of the advancements in synthetic metal oxide-based oxygen carriers over the past seven years, along with key performance indicators used for evaluation. The review focuses on the development of oxygen carriers such as Ni, Cu, Fe, Mn, Co-based metal oxides, and outlines the challenges, research needs, and opportunities for future progress in this field.

CATALYSIS TODAY (2023)

Add to Collection

Article Energy & Fuels

Development of new Mn-based oxygen carriers using MgO and SiO2 as supports for Chemical Looping with Oxygen Uncoupling (CLOU)

Inaki Adanez-Rubio et al.

Summary: Chemical Looping with Oxygen Uncoupling (CLOU) is a technology that separates the oxygen for fuel combustion using an oxygen carrier in a fuel reactor. This study investigates the behavior of Mn/Mg/Si system as oxygen carriers for CLOU. The most reactive oxygen carriers without Si in the structure were found to be M24Mg76 and M48Mg51. These carriers showed good reactivity and mechanical stability in a batch fluidized bed reactor.

FUEL (2023)

Add to Collection

Article Chemistry, Applied

Developing magnetic, durable, agglomeration resistant and reactive copper-based oxygen carrier particles by promoting a kaolin-reinforced, manganese-iron mixed oxide support

Amirhossein Filsouf et al.

Summary: Chemical looping with oxygen uncoupling (CLOU) process utilizes two interconnected fluidized bed reactors, where Cu-based oxygen carriers containing a kaolin-reinforced MnFe mixed oxide as a magnetic support were prepared to improve their properties. The effects of kaolin concentration and calcination temperature on the carriers' magnetic permeability, crushing strength, attrition, agglomeration resistance, and reactivity were studied. Two oxygen carriers containing 28.5 wt% CuO-5 wt% kaolin and 30 wt% CuO-7.5 wt% kaolin, respectively, both calcined at 1100 degrees C, showed improved mechanical resistance and maintained their magnetic properties and reactivity.

FUEL PROCESSING TECHNOLOGY (2023)

Add to Collection

Article Engineering, Environmental

Enhanced stability of iron-nickel oxygen carriers in biomass chemical looping gasification by core-shell structure

Shuang Liang et al.

Summary: This study investigates the application of core-shell structure oxygen carriers in biomass tar gasification and demonstrates their high-efficiency and clean characteristics. Under suitable conditions, the oxygen carriers significantly increase gas yield and carbon conversion efficiency. Moreover, they maintain stable performance even after cyclic experiments, indicating their potential as promising materials for chemical looping gasification.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Energy & Fuels

CuO/ZrO2 modified by WO3 oxygen carriers for chemical looping with oxygen uncoupling

Amr Abdalla et al.

Summary: Modifying CuO/ZrO2 oxygen carriers by adding WO3 can significantly increase the oxygen capacity, promote the formation of Cu-W intermediate phases, and enhance the redox characteristics of the oxygen carriers. Samples synthesized via coimpregnation method show higher oxygen release capacity, with higher Cu/W ratio and larger crystallite structure.

FUEL (2022)

Add to Collection

Review Thermodynamics

Chemical Looping Combustion and Gasification of Fuels. A Review of Studies and New Process Solutions

G. A. Ryabov

Summary: This article analyzes the current status and research and development of CO2 in chemical looping combustion and gasification of fuels. The effectiveness of high-temperature chemical looping combustion and gasification technology using metal oxides as oxygen carriers is demonstrated. Data on the application of various metal oxides, with special attention to the use of natural ores as oxygen carriers, are reviewed and analyzed. The design and operation features of chemical looping combustion plants are examined, along with the fluid dynamics of interconnected reactors.

THERMAL ENGINEERING (2022)

Add to Collection

Article Energy & Fuels

Novel magnetic manganese-iron materials for separation of solids used in high-temperature processes: Application to oxygen carriers for chemical looping combustion

Alberto Abad et al.

Summary: Different chemical looping processes using metal oxide based material as oxygen carrier allow for the combustion or gasification of solid fuels and capture of CO2, improving efficiency. The challenge lies in separating the oxygen carrier from the ash, which requires the recovery of synthetic oxygen carriers. This study focuses on designing low reactive Mn-Fe based materials with magnetic properties as support material for highly reactive phases, exhibiting suitable mechanical and magnetic characteristics for solid separation.

FUEL (2022)

Add to Collection

Article Engineering, Environmental

Co-precipitated Cu-Mn mixed metal oxides as oxygen carriers for chemical looping processes

Clemens F. Patzschke et al.

Summary: The study found that copper manganese spinel oxides are promising oxygen carriers for the CLOU and CLAS processes due to their high O-2 release capacity and fast release kinetics. Material properties of oxygen carriers can be improved by adjusting Cu:Mn ratios and synthesis conditions to optimize performance. After extended cycling tests, the oxygen carriers showed excellent stability and high resistance to attrition.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Review Environmental Sciences

A brief review for chemical looping combustion as a promising CO2 capture technology: Fundamentals and progress

Siddig Abuelgasim et al.

Summary: Chemical looping combustion (CLC) is a promising CO2 capture technology that utilizes metal particles to transport oxygen and avoid nitrogen in combustion exhaust. Oxygen carrier is a key parameter in CLC, and tests have shown its feasibility worldwide.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Add to Collection

Article Energy & Fuels

Investigation of CuO-Fe2O3 Oxygen Carriers with Different Supports in Chemical Looping Combustion

Shouxi Jiang et al.

Summary: The study investigated Cu-Fe bimetallic oxygen carriers (OCs) supported by SiO2, Al2O3, or hematite in a fluidized-bed reactor. It was found that CuFe-He and CuFe-Al OCs performed better than CuFe-Si OC, with the latter leading to deactivation due to irreversible interaction. Hematite was identified as an excellent support candidate for manufacturing Cu-Fe OCs. Additionally, maintaining a high O/C ratio and increasing reaction temperature above 850 degrees C promoted coal conversion efficiency in chemical looping combustion.

ENERGY & FUELS (2021)

Add to Collection

Article Thermodynamics

Thermodynamic evaluation and modelling of an auto-thermal hybrid system of chemical looping combustion and air separation for power generation coupling with CO2 cycles

Xudong Wang et al.

Summary: By combining various chemical looping technologies, high-efficiency power production and CO2 separation can be achieved. Modeling and simulation under fundamental conditions, followed by thermodynamic evaluations under different conditions, ultimately led to the establishment of a neural network model for predicting power output.

ENERGY (2021)

Add to Collection

Article Energy & Fuels

Spatial evolution characteristics of active components of copper-iron based oxygen carrier in chemical looping combustion

Fang Liu et al.

Summary: The reactivity of oxygen carriers in chemical looping technology is crucial, and understanding the spatial evolution of active components and lattice oxygen migration during reduction reaction is essential. Experimental and theoretical studies in this research have shown that as the reduction reaction progresses, lattice oxygen is gradually depleted, leading to an increase in Cu-0 and Fe2+ content.

FUEL (2021)

Add to Collection

Article Energy & Fuels

Investigation of reactivities of bimetallic Cu-Fe oxygen carriers with coal in high temperature in-situ gasification chemical-looping combustion (iG-CLC) and chemical-looping with oxygen uncoupling (CLOU) using a fixed bed reactor

Ping Wang et al.

Summary: The study reveals that Fe40Cu20 and Fe20Cu40 oxygen carriers exhibit different performances under varying conditions, with Fe20Cu40 showing better results in CLOU compared to Fe40Cu20 in iG-CLC.

FUEL (2021)

Add to Collection

Article Engineering, Environmental

Enhanced and environment-friendly chemical looping gasification of crop straw using red mud as a sinter-resistant oxygen carrier

Xuehua Shen et al.

Summary: Red mud as a sinter-resistant oxygen carrier can enhance the syngas yields from crop straw gasification and reduce the emission of air pollutants. The alkaline components in red mud contribute to the mitigation of environmental pollution.

WASTE MANAGEMENT (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Preventing Agglomeration of CuO-Based Oxygen Carriers for Chemical Looping Applications

Qasim Imtiaz et al.

Summary: Chemical looping combustion (CLC) is a promising alternative to conventional fossil fuel conversion processes, with CuO being a promising oxygen carrier candidate. However, the structural instability of CuO at typical operating temperatures presents a major challenge for CLC implementation.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Article Engineering, Chemical

Tuning Metal-Support Interactions on Ni/Al2O3 Catalysts to Improve Catalytic Activity and Stability for Dry Reforming of Methane

Lulu He et al.

Summary: Increasing the calcination temperature of nickel-based catalysts on alumina leads to the formation of nickel-alumina spinel, enhancing metal-support interaction and reducing temperature. It also decreases nickel nanoparticle size and increases effective dispersion due to the formation of nickel aluminate. The catalyst calcined at 750 degrees C shows the highest conversion rates in methane dry reforming and excellent stability in a 200 h test.

PROCESSES (2021)

Add to Collection

Article Engineering, Environmental

Kinetics of solid reactions with gas intermediates in chemical looping combustion

Jimin Zeng et al.

Summary: The study focused on the reactions between solid fuel and gas intermediates in a chemical looping combustion (CLC) reactor, identifying carbon gasification as a control step and determining that the diffusional resistance of 45-75 μm char particles can be ignored.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Energy & Fuels

Syngas Production in a 1.5 kWth Biomass Chemical Looping Gasification Unit Using Fe and Mn Ores as the Oxygen Carrier

Oscar Condori et al.

Summary: Biomass chemical looping gasification (BCLG) utilizes lattice oxygen from an oxygen carrier for high-quality syngas production without CO2 emissions. The main operating variables investigated in this study were the oxygen/biomass ratio (lambda), gasification temperature, and steam/biomass ratio (S/B). The results showed that the lambda significantly affected the process performance and syngas quality, while the temperature and S/B ratio had a minor impact.

ENERGY & FUELS (2021)

Add to Collection

Article Chemistry, Applied

Development of a magnetic Cu-based oxygen carrier for the chemical looping with oxygen uncoupling (CLOU) process

Inaki Adanez-Rubio et al.

Summary: This study investigated the influence of CuO fraction, preparation method, and calcination conditions on the performance of oxygen carriers for the CLOU process. Three oxygen carriers with good Cu activity, reactivity, and magnetism were selected for evaluation in a batch fluidized bed reactor. Both oxygen carriers exhibited high reactivity for gaseous oxygen release, sustained reactivity and magnetism with redox cycles, as well as low attrition rates and no agglomeration problems.

FUEL PROCESSING TECHNOLOGY (2021)

Add to Collection

Article Energy & Fuels

A particle-scale reduction model of copper iron manganese oxide with CO for chemical looping combustion

William Benincosa et al.

APPLIED ENERGY (2020)

Add to Collection

Article Engineering, Environmental

Auto-thermal operation and optimization of coal-fueled separated gasification chemical looping combustion in a pilot-scale unit

Xudong Wang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Engineering, Chemical

Bench scale analysis of the physical attrition properties for copper-ferri-aluminate oxygen carriers during chemical looping combustion

Jarrett Riley et al.

POWDER TECHNOLOGY (2020)

Add to Collection

Review Energy & Fuels

Chemical Looping Combustion: Status and Development Challenges

Anders Lyngfelt

ENERGY & FUELS (2020)

Add to Collection

Article Energy & Fuels

Effect of calcination/carbonation and oxidation/reduction on attrition of binary solid species in sorption-enhanced chemical looping reforming

Jun Young Kim et al.

FUEL (2020)

Add to Collection

Article Chemistry, Applied

The use of a low-cost oxygen carrier prepared from red mud and copper ore for in situ gasification chemical looping combustion of coal

Yanan Wang et al.

FUEL PROCESSING TECHNOLOGY (2020)

Add to Collection

Article Energy & Fuels

Oxidation kinetic modelling of Fe-based oxygen carriers for chemical looping applications: Impact of the topochemical effect

Yu-Yen Chen et al.

APPLIED ENERGY (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Operation of a 50-kWth chemical looping combustion test facility under autothermal conditions

Samuel Bayham et al.

INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL (2019)

Add to Collection

Article Energy & Fuels

50-kWth methane/air chemical looping combustion tests with commercially prepared CuO-Fe2O3-alumina oxygen carrier with two different techniques

Ranjani Siriwardane et al.

APPLIED ENERGY (2018)

Add to Collection

Article Engineering, Chemical

Bauxite-modified oxygen carrier for chemical looping combustion: A possible solution to the heat of combustion compensation

Liang Kong et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2018)

Add to Collection

Article Energy & Fuels

CLOU process performance with a Cu-Mn oxygen carrier in the combustion of different types of coal with CO2 capture

Inaki Adanez-Rubio et al.

FUEL (2018)

Add to Collection

Review Thermodynamics

Chemical looping combustion of solid fuels

J. Adanez et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2018)

Add to Collection

Article Chemistry, Applied

Evaluation of multi-functional iron-based carrier from bauxite residual for H2-rich syngas production via chemical-looping gasification

Liangyong Chen et al.

FUEL PROCESSING TECHNOLOGY (2017)

Add to Collection

Article Engineering, Environmental

The investigations of hematite-CuO oxygen carrier in chemical looping combustion

Shouxi Jiang et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Add to Collection

Article Energy & Fuels

Chemical-Looping Combustion of Hard Coal: Autothermal Operation of a 1 MWth Pilot Plant

Peter Ohlemueller et al.

JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2016)

Add to Collection

Article Chemistry, Physical

Continuous regime of chemical-looping combustion (CLC) and chemical-looping with oxygen uncoupling (CLOU) reactivity of CuO oxygen carriers

Zhiquan Zhou et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2015)

Add to Collection

Article Energy & Fuels

Chemical-looping auto-thermal reforming of biomass using Cu-based oxygen carrier

Haibo Zhao et al.

APPLIED ENERGY (2015)

Add to Collection

Article Energy & Fuels

Fluidized bed testing of commercially prepared MgO-promoted hematite and CuO-Fe2O3 mixed metal oxide oxygen carriers for methane and coal chemical looping combustion

Ranjani Siriwardane et al.

APPLIED ENERGY (2015)

Add to Collection

Article Energy & Fuels

Synergetic effects of mixed copper-iron oxides oxygen carriers in chemical looping combustion

Ranjani Siriwardane et al.

FUEL (2013)

Add to Collection

Article Chemistry, Physical

Spinel CuFe2O4:: a precursor for copper catalyst with high thermal stability and activity

S Kameoka et al.

CATALYSIS LETTERS (2005)

Add to Collection

Article Energy & Fuels

Comparison of iron-, nickel-, copper- and manganese-based oxygen carriers for chemical-looping combustion

P Cho et al.

FUEL (2004)

Add to Collection

Article Materials Science, Multidisciplinary

Thermodynamics and crystal chemistry of the hematite-corundum solid solution and the FeAlO3 phase

J Majzlan et al.

PHYSICS AND CHEMISTRY OF MINERALS (2002)

Add to Collection

Article Engineering, Chemical

A fluidized-bed combustion process with inherent CO2 separation;: application of chemical-looping combustion

A Lyngfelt et al.

CHEMICAL ENGINEERING SCIENCE (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.