Related references
Note: Only part of the references are listed.Nanocomposite Membranes for PEM-FCs: Effect of LDH Introduction on the Physic-Chemical Performance of Various Polymer Matrices
Muhammad Habib Ur Rehman et al.
POLYMERS (2023)
Ions Dynamics and Diffusion in Self-Healing Chemical Gel Electrolytes for Li-ion Batteries
Eliana Quartarone et al.
CHEMELECTROCHEM (2023)
UV-Cured Semi-Interpenetrating polymer networks of solid electrolytes for rechargeable lithium metal batteries
Zhuolin Rong et al.
CHEMICAL ENGINEERING JOURNAL (2022)
Preparation of matrix-grafted graphene/poly(poly(ethylene glycol) methyl ether methacrylate) nanocomposite gel polymer electrolytes by reversible addition-fragmentation chain transfer polymerization for lithium ion batteries
Mahtab Hamrahjoo et al.
EUROPEAN POLYMER JOURNAL (2022)
UV-cured self-healing gel polymer electrolyte toward safer room temperature lithium metal batteries
Simone Siccardi et al.
ELECTROCHIMICA ACTA (2022)
Improving the Ionic Conductivity of PEGDMA-Based Polymer Electrolytes by Reducing the Interfacial Resistance for LIBs
Lei Jin et al.
POLYMERS (2022)
Electrochemical Performance and Alkaline Stability of Cross-linked Quaternized Polyepichlorohydrin/PvDF Blends for Anion-Exchange Membrane Fuel Cells
Cataldo Simari et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2021)
Autonomous Self-Healing Strategy for Stable Sodium-Ion Battery: A Case Study of Black Phosphorus Anodes
D. Callegari et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
Exploring the Structure-Performance Relationship of Sulfonated Polysulfone Proton Exchange Membrane by a Combined Computational and Experimental Approach
Cataldo Simari et al.
POLYMERS (2021)
UV-Cured Cross-Linked Astounding Conductive Polymer Electrolyte for Safe and High-Performance Li-Ion Batteries
Faiz Ahmed et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
Polysulfone and organo-modified graphene oxide for new hybrid proton exchange membranes: A green alternative for high-efficiency PEMFCs
Cataldo Simari et al.
ELECTROCHIMICA ACTA (2021)
Barrier properties of sulfonated polysulfone/layered double hydroxides nanocomposite membrane for direct methanol fuel cell operating at high methanol concentrations
E. Lufrano et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Sulfonated polyethersulfone/polyetheretherketone blend as high performing and cost-effective electrolyte membrane for direct methanol fuel cells
C. Simari et al.
RENEWABLE ENERGY (2020)
LiDFOB Initiated In Situ Polymerization of Novel Eutectic Solution Enables Room-Temperature Solid Lithium Metal Batteries
Han Wu et al.
ADVANCED SCIENCE (2020)
An in-situ polymerized solid polymer electrolyte enables excellent interfacial compatibility in lithium batteries
Suqi Huang et al.
ELECTROCHIMICA ACTA (2019)
Preparation and characterization studies of PMMA-PEO-blend solid polymer electrolytes with SiO2 filler and plasticizer for lithium ion battery
Y. L. Yap et al.
IONICS (2019)
Understanding the Effect of UV-Induced Cross-Linking on the Physicochemical Properties of Highly Performing PEO/LiTFSI-Based Polymer Electrolytes
Marisa Falco et al.
LANGMUIR (2019)
Enhanced safety and galvanostatic performance of high voltage lithium batteries by using ionic liquids
Akiko Tsurumaki et al.
ELECTROCHIMICA ACTA (2019)
A Novel Li+-Nafion-Sulfonated Graphene Oxide Membrane as Single Lithium-Ion Conducting Polymer Electrolyte for Lithium Batteries
Isabella Nicotera et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2019)
UV-cured polymer electrolyte for LiNi0.85Co0.05Al0.1O2//Li solid state battery working at ambient temperature
Zhenyao Wei et al.
ENERGY STORAGE MATERIALS (2019)
Nanocomposite electrolytes for lithium batteries with reduced flammability
Apostolos Enotiadis et al.
ELECTROCHIMICA ACTA (2018)
A superior composite gel polymer electrolyte of Li7La3Zr2O12- poly (vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) for rechargeable solid-state lithium ion batteries
Y. F. Liang et al.
MATERIALS RESEARCH BULLETIN (2018)
A novel polymer electrolyte membrane for application in solid state lithium metal battery
Berhanu W. Zewde et al.
SOLID STATE IONICS (2018)
Influence of membrane-type and flow field design on methanol crossover on a single-cell DMFC: An experimental and multi-physics modeling study
Nicolo S. Vasile et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
NMR investigation on nanocomposite membranes based on organosilica layered materials bearing different functional groups for PEMFCs
Isabella Nicotera et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Flexible and free-standing LiFePO4/TPU/SP cathode membrane prepared via phase separation process for lithium ion batteries
Jun-Jie Bao et al.
JOURNAL OF MEMBRANE SCIENCE (2017)
A facile approach to fabricating organosilica layered material with sulfonic groups as an efficient filler for polymer electrolyte nanocomposites
Apostolos Enotiadis et al.
NEW JOURNAL OF CHEMISTRY (2017)
Two Players Make a Formidable Combination: In Situ Generated Poly(acrylic anhydride-2-methyl-acrylic acid-2-oxirane-ethyl ester-methyl methacrylate) Cross-Linking Gel Polymer Electrolyte toward 5 V High-Voltage Batteries
Yue Ma et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Preparation and performance of a novel gel polymer electrolyte based on poly( vinylidene fluoride)/graphene separator for lithium ion battery
Jiuqing Liu et al.
ELECTROCHIMICA ACTA (2017)
Highly Conductive, Sulfonated, UV-Cross-Linked Separators for Li-S Batteries
Lin Ma et al.
CHEMISTRY OF MATERIALS (2016)
Clay-Carbon Nanotubes Hybrid Materials for Nanocomposite Membranes: Advantages of Branched Structure for Proton Transport under Low Humidity Conditions in PEMFCs
Cataldo Simari et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2016)
Cure-on-command technology: A review of the current state of the art
Ali Javadi et al.
PROGRESS IN ORGANIC COATINGS (2016)
A promising PEO/LAGP. hybrid electrolyte prepared by a simple method for all-solid-state lithium batteries
Yanran Zhao et al.
SOLID STATE IONICS (2016)
A triPEG-boron based electrolyte membrane for wide temperature lithium ion batteries
Junyi Xu et al.
RSC ADVANCES (2016)
Preparation and characterization of PEO-PMMA polymer composite electrolytes doped with nano-Al2O3
Bo Liang et al.
ELECTROCHIMICA ACTA (2015)
An NMR study on the molecular dynamic and exchange effects in composite Nafion/sulfated titania membranes for PEMFCs
Isabella Nicotera et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Multiscale Lithium and Counterion Transport in an Electrospun Polymer-Gel Electrolyte
Bryce E. Kidd et al.
MACROMOLECULES (2015)
Poly(ethylene oxide)-based electrolytes for lithium-ion batteries
Zhigang Xue et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Multifunctional Luminescent Down-Shifting Fluoropolymer Coatings: A Straightforward Strategy to Improve the UV-Light Harvesting Ability and Long-Term Outdoor Stability of Organic Dye-Sensitized Solar Cells
Gianmarco Griffini et al.
ADVANCED ENERGY MATERIALS (2015)
Photopolymer Materials and Processes for Advanced Technologies
James V. Crivello et al.
CHEMISTRY OF MATERIALS (2014)
Lithium bis(fluorosulfonyl)imide/poly(ethylene oxide) polymer electrolyte
Heng Zhang et al.
ELECTROCHIMICA ACTA (2014)
Organo-Modified Montmorillonite Enhanced Chemiluminescence via Inactivation of Halide Counterions in a Micellar Solution
Shuang Chen et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2014)
Visible light initiating systems for photopolymerization: status, development and challenges
Jianzhong Shao et al.
POLYMER CHEMISTRY (2014)
A Composite Gel Polymer Electrolyte with High Performance Based on Poly(Vinylidene Fluoride) and Polyborate for Lithium Ion Batteries
Yusong Zhu et al.
ADVANCED ENERGY MATERIALS (2014)
Rheological characterizations of ionic liquid-based gel polymer electrolytes and fumed silica-based composite polymer electrolytes
S. Ramesh et al.
CERAMICS INTERNATIONAL (2012)
Evaluation of smectite clays as nanofillers for the synthesis of nanocomposite polymer electrolytes for fuel cell applications
Isabella Nicotera et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
Mechanism of ion transport in PEO/LiTFSI complexes: Effect of temperature, molecular weight and end groups
D. Devaux et al.
SOLID STATE IONICS (2012)
Functionalized PEG hydrogels through reactive dip-coating for the formation of immunoactive barriers
Patrick S. Hume et al.
BIOMATERIALS (2011)
Microfibrillated cellulose as reinforcement for Li-ion battery polymer electrolytes with excellent mechanical stability
A. Chiappone et al.
JOURNAL OF POWER SOURCES (2011)
Methacrylic-based solid polymer electrolyte membranes for lithium-based batteries by a rapid UV-curing process
Jijeesh R. Nair et al.
REACTIVE & FUNCTIONAL POLYMERS (2011)
The modification of Na-montmorillonite by salts of fatty acids: An easy intercalation process
Nihal Sarier et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2010)
Photoinitiated polymerization of PEG-diacrylate with lithium phenyl-2,4,6-trimethylbenzoylphosphinate: polymerization rate and cytocompatibility
Benjamin D. Fairbanks et al.
BIOMATERIALS (2009)
Fatigue properties of highly oriented polypropylene tapes and all-polypropylene composites
N. -M. Barkoula et al.
POLYMERS & POLYMER COMPOSITES (2008)
Investigation of ionic conduction and mechanical properties of PMMA-PVdF blend-based polymer electrolytes
I Nicotera et al.
SOLID STATE IONICS (2006)
Review on gel polymer electrolytes for lithium batteries
AM Stephan
EUROPEAN POLYMER JOURNAL (2006)
Some physicochemical properties of PAN-based electrolytes: solution and gel microstructures
I Nicotera et al.
SOLID STATE IONICS (2004)
Temperature dependence of lithium ion solvation in ethylene carbonate-LiClO4 solutions
M Castriota et al.
JOURNAL OF CHEMICAL PHYSICS (2003)
Diffusion:: a comparison between liquid and solid polymer LiTFSI electrolytes
G Orädd et al.
SOLID STATE IONICS (2002)
Share Paper
