4.7 Article

Piezoelectric responses of PVDF-KBT electrospun nanocomposite fibres via nanoscale mapping

Related references

Note: Only part of the references are listed.
Article Materials Science, Ceramics

Fabrication and Characterization of High Performance PVDF-based flexible piezoelectric nanogenerators using PMN-xPT (x:30, 32.5, and 35) particles

Levent Parali et al.

Summary: Flexible piezoelectric nanogenerators based on PVDF and PMN-PT particles were fabricated. The incorporation of PMN-PT particles into PVDF resulted in a homogenous and continuous fiber-shaped composite structure with good interfacial interaction. The nanogenerator with 30%PVDF/PMN-35PT exhibited 3 times higher electrical power efficiency compared to pure PVDF nanogenerator under the same resistance load. This approach shows promise for high-performance flexible piezoelectric nanogenerator applications in biomechanical energy harvesting.

CERAMICS INTERNATIONAL (2023)

Article Materials Science, Ceramics

Flexible three-dimensional interconnected PZT skeleton based piezoelectric nanogenerator for energy harvesting

Xiujuan Lin et al.

Summary: In this study, a PZT ceramic skeleton with a three-dimensional network structure was fabricated via freeze casting technique. PZT/PDMS composites were prepared by introducing PDMS to the aligned pores of both green and sintered PZT skeletons. The PENG composed of sintered PZT skeleton exhibited superior electrical output performance compared to the green one, and this work provides a reference for the further development of PENG in the prospective market.

CERAMICS INTERNATIONAL (2023)

Article Engineering, Electrical & Electronic

Highly sensitive, flexible and wearable piezoelectric motion sensor based on PT promoted β-phase PVDF

Jing Li et al.

Summary: In this study, a highly sensitive piezoelectric sensor was designed, which can stably record human joint movement and breathing, showing great potential for online movement monitoring of personal health.

SENSORS AND ACTUATORS A-PHYSICAL (2022)

Article Chemistry, Physical

Lead-Free Transparent Flexible Piezoelectric Nanogenerator for Self-Powered Wearable Electronic Sensors and Energy Harvesting through Rainwater

Sushmitha Veeralingam et al.

Summary: In this study, a new high-performance, flexible, biocompatible, lead-free piezoelectric nanogenerator has been reported. The device achieves stable high output voltage and current density, with a fast response and high energy conversion efficiency. The versatility of the nanogenerator is also demonstrated through various applications.

ACS APPLIED ENERGY MATERIALS (2022)

Review Materials Science, Multidisciplinary

Recent advances in flexible PVDF based piezoelectric polymer devices for energy harvesting applications

Sunija Sukumaran et al.

Summary: Energy harvesting using piezoelectric materials, such as PVDF, is a promising avenue for sustainable power sources. Recent research has focused on improving performance through processing methods, materials, and filler loading, as well as designing new structures to enhance piezoelectricity and overall device output. Electronic circuits play a crucial role in efficiently collecting developed charge, and advancements are being made in flexible, biomedical, and hybrid generators based on PVDF polymers.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2021)

Review Materials Science, Ceramics

A critical review on lead-free hybrid materials for next generation piezoelectric energy harvesting and conversion

Swagata Banerjee et al.

Summary: This article provides a comprehensive review of lead-free hybrid nano materials based piezoelectric fillers, focusing on the shift from lead based to lead free piezoelectric materials. It discusses the categorization of piezoelectric materials, the effects of doping, and the wide range of applications in different fields. The future prospects of piezoelectricity and materials in meeting technological demands are also addressed.

CERAMICS INTERNATIONAL (2021)

Article Polymer Science

Holistic investigation of the electrospinning parameters for high percentage of β- phase in PVDF nanofibers

Rahul Kumar Singh et al.

Summary: PVDF is a piezoelectric polymer with five phases, with the beta-phase contributing the most to its piezoelectricity. Researchers commonly use electrospinning to develop PVDF nanofibers-based sensors, with spinning distance found to have the most significant impact on the percentage of beta-phase. Other important parameters affecting the beta-phase percentage include the electric field, drum speed, and solution flow rate. By optimizing these parameters and developing sensors on a flexible substrate, the study achieved the highest voltage output from sensors made with 1 hour of electrospinning. This systematic study can be applied to optimize nanofiber properties in any electrospinning set-up.

POLYMER (2021)

Article Chemistry, Physical

Multifunctional lead-free K0.5Bi0.5TiO3-based ceramic reinforced PVDF matrix composites

Sushmita Dwivedi et al.

Summary: This study aims to experimentally verify proposed models for the behavior of polymer-ceramic composites and design a new composite material with excellent piezoelectric performance. By adding ceramic fillers, the thermodynamic stability of the composite was improved, leading to enhanced dielectric and piezoelectric properties.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Materials Science, Ceramics

Full characterization for material constants of a promising KNN-based lead-free piezoelectric ceramic

Liao Qiao et al.

CERAMICS INTERNATIONAL (2020)

Article Chemistry, Multidisciplinary

On the Nanoscale Mapping of the Mechanical and Piezoelectric Properties of Poly (L-Lactic Acid) Electrospun Nanofibers

Nguyen Thai Cuong et al.

APPLIED SCIENCES-BASEL (2020)

Review Chemistry, Analytical

Piezoelectric Energy Harvesting Solutions: A Review

Corina Covaci et al.

SENSORS (2020)

Article Materials Science, Multidisciplinary

Significantly improved dielectric and piezoelectric properties of BiAlO3 modified potassium bismuth titanate lead-free ceramics

Manish Badole et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2020)

Article Materials Science, Ceramics

Bi0.5K0.5TiO3-CaTiO3 ceramics: Appearance of the pseudocubic structure and ferroelectric-relaxor transition characters

Yongxing Wei et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)

Review Chemistry, Physical

Strategies to achieve high performance piezoelectric nanogenerators

Dengwei Hu et al.

NANO ENERGY (2019)

Review Chemistry, Multidisciplinary

Flexible Nanogenerators for Energy Harvesting and Self-Powered Electronics

Feng Ru Fan et al.

ADVANCED MATERIALS (2016)

Article Physics, Applied

High β phase content in PVDF/CoFe2O4 nanocomposites induced by DC magnetic fields

Shenglin Jiang et al.

APPLIED PHYSICS LETTERS (2016)

Article Materials Science, Ceramics

Preparation and characterization of K0.5Bi0.5TiO3 particles synthesized by a stirring hydrothermal method

Imen Krad et al.

CERAMICS INTERNATIONAL (2016)

Review Chemistry, Multidisciplinary

Piezoelectric and ferroelectric materials and structures for energy harvesting applications

C. R. Bowen et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Proceedings Paper Physics, Applied

Effect of annealing process on the phase formation in Poly(vinylidene fluoride) Thin Films

Ibtisam Yahya Abdullah et al.

2014 UKM FST POSTGRADUATE COLLOQUIUM: PROCEEDINGS OF THE UNIVERSITI KEBANGSAAN MALAYSIA, FACULTY OF SCIENCE AND TECHNOLOGY 2014 POSTGRADUATE COLLOQUIUM (2014)

Article Physics, Condensed Matter

PVDF Phase Formation and Its Influence on Electrical and Structural Properties of PZT-PVDF Composites

T. Greeshma et al.

FERROELECTRICS LETTERS SECTION (2013)

Article Instruments & Instrumentation

Phase transition in poly(vinylidene fluoride) investigated with micro-Raman spectroscopy

CJL Constantino et al.

APPLIED SPECTROSCOPY (2005)