☆ 4.6 Review

Modification effects of nanosilica on asphalt binders: A review

NANOTECHNOLOGY REVIEWS (2023)

Related references

Note: Only part of the references are listed.

Article Polymer Science

Study on preparation and performance of advanced nano-modified epoxy asphalt

Danlei Wang et al.

Summary: This study aims to improve the mechanical properties of epoxy asphalt (EA) by using graphene oxide nanosheets (GOs) and multiwalled carbon nanotubes (CNTs). The results show that the tensile properties of EA are significantly improved when 0.01 wt% CNTs and 0.02 wt% GOs are added, with a 21% increase in fracture toughness.

JOURNAL OF APPLIED POLYMER SCIENCE (2023)

Add to Collection

Review Green & Sustainable Science & Technology

Fatigue and intermediate-temperature cracking performance of rejuvenated recycled asphalt binders and mixtures: A review

Mohsen Alae et al.

Summary: Incorporating reclaimed asphalt pavement (RAP) with a rejuvenator can improve the fatigue performance of the mixture. However, the effectiveness of rejuvenators in enhancing fatigue resistance varies due to different types and dosages of rejuvenators, RAP sources and percentages, and testing methods. A comprehensive literature review and laboratory study are conducted to understand the rejuvenation mechanism and evaluate the impact of rejuvenators on RAP binder and mixture. It is found that polymer modification can significantly improve the fatigue performance of rejuvenated RAP materials, but a consistent indicator for determining fatigue resistance is lacking.

JOURNAL OF CLEANER PRODUCTION (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Investigation of Aging Resistance of Organic Layered Double Hydroxide/Antioxidant Composite-Modified Asphalt

Song Xu et al.

Summary: Two organic layered double hydroxides (OLDHs) intercalated by UV absorbents of para-aminobenzoic acid (PABA) and cinnamic acid (CA) were synthesized and used to modify asphalt in combination with antioxidants. The modified asphalt showed enhanced anti-UV aging performance and improved thermal-oxidation and photo-oxidation aging resistance. The combination of 1076/PABA-LDHs and 1010/CA-LDHs had better improvement effects on the aging properties of asphalt compared to other combinations.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2023)

Add to Collection

Article Construction & Building Technology

Investigation of the Effect of Combined Nanosilica and Iranian Natural Binder on the Rheological Behavior of Mastics and Performance of Asphalt Mixtures

Rezvan Babagoli et al.

Summary: The aim of this study was to evaluate the impact of nanosilica (NS) and gilsonite on the behavior of asphalt binders and stone matrix asphalt (SMA) samples. The results showed that gilsonite and NS enhanced the rutting and fatigue resistances of asphalt binders, while NS improved the low-temperature resistance and storage stability. Additionally, gilsonite and NS improved the performance characteristics of mixtures in terms of permanent deformation resistance, ITS, MR, fracture energy, and intermediate-temperature properties.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Preparation and properties of nano-SiO2 modified microcapsules for asphalt pavement

Xiaoping Ji et al.

Summary: This study presents nano-SiO2 modified microcapsules prepared by in-situ polymerization to improve their performance. The optimal preparation parameters were determined, and the properties of the prepared microcapsules were evaluated. The results showed that the addition of nano-SiO2 can obviously improve the performance of microcapsules.

MATERIALS & DESIGN (2023)

Add to Collection

Article Construction & Building Technology

Preparation and performance evaluation of different bitumens modified by antioxidant/PABA-LDHs composites

Song Xu et al.

Summary: The PABA-LDHs were prepared by intercalating para-aminobenzoic acid into the layers of LDHs through anion exchange, which effectively improved the aging resistance of bitumen by reflecting and absorbing UV rays and blocking oxygen. The composite modification of PABA-LDHs with 1076 and 1010 further enhanced the thermal and photo-oxidative aging resistance of bitumen, exhibiting a complementary effect. Furthermore, 1076/PABA-LDHs modified bitumen showed superior anti-aging property compared to 1010/PABA-LDHs modified bitumen.

CONSTRUCTION AND BUILDING MATERIALS (2023)

Add to Collection

Article Construction & Building Technology

Multi-scale analysis of moisture diffusion and distribution in different types of asphalt mixtures

Xinxing Zhou et al.

Summary: This research focuses on studying the impact of moisture diffusion and distribution in asphalt mixtures, especially under heavy traffic conditions. Experimental results show that the moisture diffusion path is three-dimensional curves, moisture distribution is related to air voids or mixture types, and the durability of asphalt mixtures is significantly affected under heavy traffic conditions.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2022)

Add to Collection

Article Construction & Building Technology

Influence of nanosilica particles on the high-temperature performance of waste denim fibre-modified bitumen

Abdulnaser M. Al-Sabaeei et al.

Summary: In this study, nanosilica and waste denim fiber were used to improve the rutting performance of bitumen. The addition of nanosilica to waste denim fiber-modified bitumen improved its conventional characteristics and rutting resistance parameters.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2022)

Add to Collection

Article Construction & Building Technology

Evaluating the effects of styrene-butadiene rubber (SBR) and polyphosphoric acid (PPA) on asphalt adhesion performance

Yajin Han et al.

Summary: This paper evaluates the influences of SBR, PPA, and SBR&PPA on the adhesion performance of base asphalt. The results show that the dosages of SBR and PPA have a significant impact on the adhesion performance of the asphalt binder and its mixture. At the nanoscale, PPA and SBR modifiers can improve the adhesion force of base asphalt. At the asphalt scale, both modifiers enhance the surface free energy of base asphalt. At the asphalt-aggregate and mixture scales, the SBR modifier significantly enhances the pull-off strength and dry tensile strength of the asphalt. Considering the moisture damage resistance, the asphalt modified with 1.5% SBR&2% PPA is recommended.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Environmental and economic assessment of collective recycling waste plastic and reclaimed asphalt pavement into pavement construction: A case study in Hong Kong

Linyi Yao et al.

Summary: This study investigates the technical, environmental, and economic feasibility of using waste plastic and reclaimed asphalt pavement (RAP) in road maintenance and rehabilitation. The results show that incorporating Polyethylene Terephthalate (PET) modified asphalt containing RAP could significantly reduce life cycle costs and greenhouse gas emissions. Durability is found to be a key factor in maintaining their advantages throughout the pavement life cycle.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Construction & Building Technology

Performance Evaluation of Stone Matrix Asphalt Mixtures and Low-Temperature Properties of Asphalt Binders Containing Reclaimed Asphalt Pavement Materials Modified with Nanosilica

Seyed Ataollah Saed et al.

Summary: This study evaluated the performance of stone matrix asphalt (SMA) mixtures modified with nanosilica and reclaimed asphalt pavement (RAP) materials. The results showed that nanosilica significantly increased the rutting resistance and resilient modulus of the mixtures, as well as the moisture susceptibility and fracture resistance. However, the effectiveness of nanosilica in improving the tensile strength ratio (TSR) of the mixtures was undermined when used in combination with RAP materials, and the modification of asphalt binders with nanosilica decreased the low-temperature performance, especially in binders containing RAP materials.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2022)

Add to Collection

Article Engineering, Civil

Study Investigating the Influence of Warm-Mix Asphalt Additives on Rutting and Fatigue Performance of Nano-Modified Asphalt Binders

Faheem Sadiq Bhat et al.

Summary: The current study investigates the synergized effect of a nanomaterial and two warm mix additives on different properties of asphalt binders. Results showed that the addition of warm mix additives improved the softening point, rutting, and fatigue performance of the nanomaterial modified asphalt binders.

TRANSPORTATION RESEARCH RECORD (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Numerical study of the aggregate contact effect on the complex modulus of asphalt concrete

Zhifei Tan et al.

Summary: This study investigates the effect of aggregate-to-aggregate contact on the mechanical performance of asphalt concrete (AC) through micromechanical finite element modeling. The results show that considering aggregate contacts results in higher predicted AC dynamic moduli and lower phase angles, improving the agreement between modeling and experimental results. The numerical model developed in this study provides a promising approach for studying the influence of aggregate contacts on the mechanical performance of AC.

MATERIALS & DESIGN (2022)

Add to Collection

Article Construction & Building Technology

Application of nano silica particles to improve high-temperature rheological performance of tyre pyrolysis oil-modified bitumen

Abdulnaser Al-Sabaeei et al.

Summary: The study found that the addition of nano silica particles to tyre pyrolysis oil (TPO)-modified bitumen significantly improved its rutting resistance and upgraded the high-temperature performance grade of the bitumen. Statistical analysis confirmed the significant effects of NS particles on the rutting performance of TPO-modified bitumen within a 95% confidence interval. This enhancement demonstrates the potential for improving the high-temperature performance of TPO-modified bitumen.

ROAD MATERIALS AND PAVEMENT DESIGN (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Asphalt Binder Skincare? Aging Evaluation of an Asphalt Binder Modified by Nano-TiO2

Orlando Lima et al.

Summary: This study investigated the effects of nano-TiO2 on the aging of asphalt binder by modifying a commercial binder. The results showed that incorporating 0.25% nano-TiO2 effectively mitigated binder aging.

NANOMATERIALS (2022)

Add to Collection

Article Engineering, Civil

Evaluation of the cracking and aging susceptibility of asphalt mixtures using viscoelastic properties and master curve parameters

Runhua Zhang et al.

Summary: This study aims to investigate the changes in viscoelastic properties of asphalt mixtures over time, and evaluate the cracking and aging susceptibility of mixtures with different variables in material selection and mixture design. Various laboratory conditioning protocols were used to simulate different aging levels, and complex modulus tests were conducted on aged mixtures to measure viscoelastic properties and construct master curves. The study demonstrates the effectiveness of certain parameters in capturing the effect of aging conditions on asphalt mixture properties.

JOURNAL OF TRAFFIC AND TRANSPORTATION ENGINEERING-ENGLISH EDITION (2022)

Add to Collection

Article Construction & Building Technology

Storage stability and anti-aging performance of SEBS/organ-montmorillonite modified asphalt

Yunbin Ke et al.

Summary: This study investigated the properties of SEBS/OMMT modified asphalt, including physical properties, storage stability at high temperature, rheological properties, anti-aging performance, and micro morphology. The results showed that the addition of OMMT improved the high temperature performance, enhanced compatibility between SEBS and asphalt molecules, and improved the hot storage stability of SEBS modified asphalt. Furthermore, OMMT mitigated the short-term and long-term aging of SEBS modified asphalt.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Evaluating the High-Temperature Properties and Reaction Mechanism of Terminal Blend Rubber/Nano Silica Composite Modified Asphalt Using Activated Rubber

Nonde Lushinga et al.

Summary: This research evaluated the high-temperature properties and reaction mechanism of TB rubber/nano silica composite modified asphalt using microwave activated rubber. The results showed that nano silica had a positive impact on the high temperature rutting resistance, storage stability, and anti-aging properties of TB rubberized asphalt. Nano silica improved the interaction and compatibility between CR particles and bitumen and enhanced the overall rheological properties of the binders. Therefore, further exploration and application of this composite modified asphalt are recommended.

NANOMATERIALS (2022)

Add to Collection

Article Construction & Building Technology

Pure mode I fracture resistance of hot mix asphalt (HMA) containing nano-SiO2 under freeze-thaw damage (FTD)

Mohammad Zarei et al.

Summary: In this study, the effect of Nano-SiO2 on the occurrence of low and intermediate temperature cracks under freeze-thaw damage conditions in asphalt mixtures was investigated experimentally. The results showed that adding Nano-SiO2 increased the brittleness and fracture energy of the mixtures, improving their long-term performance.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Construction & Building Technology

Pavement performance and modification mechanisms of asphalt binder with nano-Al2O3

Zhiyuan Ji et al.

Summary: This study investigates the feasibility and mechanisms of using nano-Al2O3 for asphalt modification. The results show that nano-Al2O3 improves the aging resistance, high temperature performance, and bonding performance of asphalt, with insignificant adverse effects on low temperature performance. The modification of base asphalt binder with nano-Al2O3 is found to be a physical blending process that inhibits the growth of sulfoxide groups and increases the molecular weight of asphalt binder.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Penetration mechanism of the emulsion-based rejuvenator in damaged porous asphalt mixture: Microstructure characterization and 3D reconstruction

Jiwang Jiang et al.

Summary: This study investigates the penetration behavior of surface treatment (ST) emulsions in damaged porous asphalt (PA) using X-ray CT scanning and image analysis. The results show that ST emulsions have a gradient distribution in damaged PA, with a maximum penetration depth of about 20 mm. Among the three ST conditions, the PA specimen treated with the ST emulsion that has the best coating efficiency and thickest coating film exhibits the best performance recovery.

MATERIALS & DESIGN (2022)

Add to Collection

Review Construction & Building Technology

A comprehensive review on the usage of nanomaterials in asphalt mixes

Khumber Debbarma et al.

Summary: Nanomaterials hold promise for asphalt modification, but face challenges in practical application, requiring further research to fill existing gaps.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Construction & Building Technology

Meso-structure image pre-selection method for two-dimensional finite element modeling in beam bending simulation of asphalt mixture

Yanjing Zhao et al.

Summary: This study utilized X-ray CT scanning technology to obtain internal mesostructure images of asphalt mixtures, constructed 2D FE models, proposed a crack position prediction method based on image processing technology, significantly reducing model quantity and improving calculation efficiency.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article

Evaluation of Strength and Water Susceptibility Performance of Polypropylene Fiber–Reinforced and Silica Fume–Modified Hot Mix Asphalt

Nitin Tiwari et al.

Advances in Civil Engineering Materials (2021)

Add to Collection

Article Construction & Building Technology

Rutting resistance, fatigue properties and temperature susceptibility of nano clay modified asphalt rubber binder

Amir Amini et al.

Summary: The study demonstrates that adding nanoclay improves the performance of asphalt rubber binder, reducing permanent strain and enhancing rutting resistance. A polymer network in ARB at low strain increases fatigue life, but may lead to network destruction at high strain.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Investigation of anti-aging mechanism of multi-dimensional nanomaterials modified asphalt by FTIR, NMR and GPC

Shuai Zhang et al.

Summary: This study aimed to improve the anti-aging properties of asphalt by adding multi-dimensional nanomaterials. The experiments showed that MDN can decrease the increase of softening point, viscosity aging index, and complex modulus aging index of asphalt, while increasing retained penetration and phase angle aging index.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Laboratory study on the suitability of nano-silica as a modifier for asphalt binders

Mayank Sukhija et al.

Summary: This paper reports laboratory investigations on the effect of nanosilica (NS) on the physical, morphological, and rheological properties of asphalt binder. The study found that NS modification improves rutting characteristics but reduces fatigue resistance, with the extent of improvement being binder dependent. Overall, NS modification is more beneficial for locations with high pavement temperatures and heavy vehicular loading conditions.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Rheological behavior of asphalt binders and fatigue resistance of SMA mixtures modified with nano-silica containing RAP materials under the effect of mixture conditioning

Neda Kamboozia et al.

Summary: The study showed that modifying asphalt binders with nano-silica improved temperature susceptibility, rutting resistance, and fatigue life of the pavement, but had a negative impact on low-temperature performance.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

An Improved Asphalt Penetration Test Method

Zhoujing Ye et al.

Summary: This study used a high-speed camera and Finite Element Method to quantify the entire penetration process of asphalt binders, revealing the presence of stress relaxation and creep during penetration. The improved test method and data interpretation procedure may better characterize the properties of asphalt binder, potentially expanding the applications of traditional penetration tests.

MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Aging Resistance of Silica Fume/Styrene-Butadiene-Styrene Composite-Modified Asphalt

Jingrong Zhu et al.

Summary: The study found that adding 6% silica fume to composite-modified asphalt can significantly improve the aging resistance and low-temperature crack resistance of the asphalt.

MATERIALS (2021)

Add to Collection

Review Construction & Building Technology

A review of phase structure of SBS modified asphalt: Affecting factors, analytical methods, phase models and improvements

Mingyuan Chen et al.

Summary: This article reviews the changes in phase structure of SBSMA, analyzes the influencing factors, summarizes the phase structure analysis methods, and finally concludes the phase structure stability of SBSMA mixed with other materials.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Advanced method for measuring asphalt viscosity: Rotational plate viscosity method and its application to asphalt construction temperature prediction

Haoyuan Luo et al.

Summary: A new viscosity measurement method named rotational plate viscosity (RPV) testing was proposed in this study to address the issues observed in traditional methods when used with various modified asphalts. This new method utilizes a Dynamic Shear Rheometer (DSR) with a fixed shear rate to measure the viscosity-temperature curve of modified asphalts, offering convenience and improved accuracy in testing.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Development of magnesium oxychloride cement with enhanced water resistance by adding silica fume and hybrid fly ash-silica fume

Yingying Guo et al.

Summary: By adding silica fume and fly ash, the microstructure of MOC was optimized, increasing density and compressive strength, thus improving water resistance.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Construction & Building Technology

Correlating the Asphalt-Binder BBR Test Data to the HMA (ML-OT) Fracture Properties

Lubinda F. Walubita et al.

Summary: The study indicates that the low-temperature rheological properties of asphalt-binders, particularly stiffness, have promising potential in predicting the fracture properties of hot-mix asphalt. Laboratory tests show a correlation with a coefficient of determination exceeding 60%.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Study on adaptability of rheological index of nano-PUA-modified asphalt based on geometric parameters of parallel plate

Xiaolong Sun et al.

Summary: The study found that the higher the content of nano-PUA modifier, the better the high-temperature performance of the modified asphalt. It was also concluded that using the 25 mm parallel plate for rheological testing was more suitable for evaluating the rheological performance of PUA-modified asphalt.

NANOTECHNOLOGY REVIEWS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Combined effects of nano-silica and silica fume on the mechanical behavior of recycled aggregate concrete

Tang Yunchao et al.

Summary: The combination of silica fume and nano-silica as additives improves the performance of recycled aggregate concrete in both early and later stages. These additives exhibit good pozzolanic activity, enhancing the secondary hydration reaction with calcium hydroxide to improve the properties of the interface transition zone.

NANOTECHNOLOGY REVIEWS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Effect of nano-silica as cementitious materials- reducing admixtures on the workability, mechanical properties and durability of concrete

Changjiang Liu et al.

Summary: Nano-silica, as a reinforcement for cement-based composite materials, improves the compressive and tensile strength of concrete, and enhances its durability. Additionally, the use of nano-silica promotes hydration reactions, resulting in a denser internal structure for concrete.

NANOTECHNOLOGY REVIEWS (2021)

Add to Collection

Review Nanoscience & Nanotechnology

Review on structural damage rehabilitation and performance assessment of asphalt pavements

Hua-Ping Wang et al.

Summary: This study explores the damage propagation principle, distress rehabilitation, structural performance, and damage assessment of asphalt pavements, introducing the latest parameters for describing cracking and rutting and discussing the development trend of damage self-healing, rehabilitation, and structural assessment. It provides scientific guidance for understanding commonly used structural damage rehabilitation measures and performance assessment methods of asphalt pavements.

REVIEWS ON ADVANCED MATERIALS SCIENCE (2021)

Add to Collection

Article Construction & Building Technology

Rheological investigation of asphalt binder modified with nanosilica

Faheem Sadiq Bhat et al.

Summary: The study found that nanosilica as a binder modifier can effectively enhance the fatigue performance and aging resistance of asphalt binders, its addition can enhance rutting potential and have self-healing capability.

INTERNATIONAL JOURNAL OF PAVEMENT RESEARCH AND TECHNOLOGY (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Mesoporous silica nanoparticles functionalized with folic acid for targeted release Cis-Pt to glioblastoma cells

Emma Ortiz-Islas et al.

Summary: This study reported the preparation, characterization, and drug release study of mesoporous silica nanoparticles functionalized with folic acid for targeted release of Cis-Pt to kill glioblastoma cancer cells. The MNPSiO2 showed high surface area, large pore size, and proper functionalization, with Higuchi model fitting better to the experimental results. The MNPSiO2-FA were highly biocompatible and enhanced the cytotoxic effect of Cis-Pt.

REVIEWS ON ADVANCED MATERIALS SCIENCE (2021)

Add to Collection

Review Nanoscience & Nanotechnology

Nanotechnology-based materials as emerging trends for dental applications

Tejas Barot et al.

Summary: Nanomaterials have unique and superior properties that make them highly advanced and vital for rapid diagnosis and treatment in the health sector, particularly in dentistry. By incorporating nanoparticles into dental restorative materials, they can be useful for preventing and managing dental caries, potentially revolutionizing oral health.

REVIEWS ON ADVANCED MATERIALS SCIENCE (2021)

Add to Collection

Article Construction & Building Technology

Predicted performance of hot mix asphalt modified with nano-montmorillonite and nano-silicon dioxide based on Egyptian conditions

Helal Ezzat et al.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2020)

Add to Collection

Article Construction & Building Technology

Effect of nanosilica morphology on modification of asphalt binder

Ali Reza Moeini et al.

ROAD MATERIALS AND PAVEMENT DESIGN (2020)

Add to Collection

Article Construction & Building Technology

Rheological properties and micro-characteristics of polyurethane composite modified asphalt

Xin Jin et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Characterizing the SBS polymer degradation within high content polymer modified asphalt using ATR-FTIR

Chuanqi Yan et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Thermal Property Evaluation of Porous Asphalt Concrete Based on Heterogeneous Meso-Structure Finite Element Simulation

Yanjing Zhao et al.

APPLIED SCIENCES-BASEL (2020)

Add to Collection

Article Construction & Building Technology

Experimental investigation of the fatigue phenomenon in nano silica-modified warm mix asphalt containing recycled asphalt considering self-healing behavior

Saber Kie Badroodi et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Evaluating Fatigue-Damage of Asphalt Binder and Mastic Modified with Nano-Silica and Synthesized Polyurethane Using VECD Method

Mana Motamedi et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2020)

Add to Collection

Article Construction & Building Technology

Analysis of interfacial adhesion properties of nano-silica modified asphalt mixtures using molecular dynamics simulation

Zhengwu Long et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

High and Low Temperature Performance and Fatigue Properties of Silica Fume/SBS Compound Modified Asphalt

Xuewen Zheng et al.

MATERIALS (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Sustainable Urban Street Comprising Permeable Pavement and Bioretention Facilities: A Practice

Yiqing Dai et al.

SUSTAINABILITY (2020)

Add to Collection

Article Energy & Fuels

Experimental investigation of the effect of asphalt binder modified with nanosilica on the rutting, fatigue and performance grade

Gholamali Shafabakhsh et al.

PETROLEUM SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Construction & Building Technology

Correlation of DSR Results and FTIR's Carbonyl and Sulfoxide Indexes: Effect of Aging Temperature on Asphalt Rheology

Dongdong Ge et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2019)

Add to Collection

Article Construction & Building Technology

Laboratory evaluation of nano-silica modification on rutting resistance of asphalt Binder

Seyed Alireza Ghanoon et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Evaluation of Mixing and Compaction Temperatures (MCT) for modified asphalt binders using zero shear viscosity and Cross-Williamson model

Zaynab Qasim et al.

CASE STUDIES IN CONSTRUCTION MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Effects of nano-silica and rock asphalt on rheological properties of modified bitumen

Xingang Shi et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Differences in asphalt binder variability quantified through traditional and advanced laboratory testing

Allex E. Alvarez et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Predicting rutting performance of carbon nano tube (CNT) asphalt binders using regression models and neural networks

Hasan Ziari et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Improving aging resistance and fatigue performance of asphalt binders using inorganic nanoparticles

Hossein Nazari et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Effect of nanosilica particles on polypropylene polymer modified asphalt mixture performance

Nura Bala et al.

CASE STUDIES IN CONSTRUCTION MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Comparative Study of the Effects of Nanosilica and Zyco-Soil Nanomaterials on the Properties of Asphalt Concrete

Hasan Taherkhani et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2017)

Add to Collection

Article Construction & Building Technology

Effect of nano silica and pretreated rubber on the properties of terminal blend crumb rubber modified asphalt

Lili Han et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Construction & Building Technology

Examination of hot mix asphalt and binder performance modified with nano silica

Mehmet Saltan et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Review Construction & Building Technology

Developments of nano materials and technologies on asphalt materials - A review

Ruoyu Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Construction & Building Technology

Physiochemical, Rheological, and Oxidative Aging Characteristics of Asphalt Binder in the Presence of Mesoporous Silica Nanoparticles

Ellie H. Fini et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2016)

Add to Collection

Article Construction & Building Technology

Use of the MSCR test to characterize the asphalt binder properties relative to HMA rutting performance - A laboratory study

Jun Zhang et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Add to Collection

Article Construction & Building Technology

Experimental investigation of effect of Nano TiO2/SiO2 modified bitumen on the rutting and fatigue performance of asphalt mixtures containing steel slag aggregates

G. H. Shafabakhsh et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Add to Collection

Article Construction & Building Technology

High temperature performance evaluation of bio-oil modified asphalt binders using the DSR and MSCR tests

Xu Yang et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Add to Collection

Article Construction & Building Technology

Performance evaluation of nano-modified asphalt concrete

Sebnem Sargin Karahancer et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Add to Collection

Article Construction & Building Technology

The effects of moisture susceptibility and ageing conditions on nano-silica/polymer-modified asphalt mixtures

Nur Izzi Md Yusoff et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Add to Collection

Article Construction & Building Technology

Rheological Properties and Chemical Bonding of Asphalt Modified with Nanosilica

Hui Yao et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2013)

Add to Collection

Article Engineering, Civil

Evaluating Effects of Volumetric and Mechanistic Test Variability on Predicted Performance of Asphalt Pavement: Applying the Mechanistic-Empirical Pavement Design Guide

Louay N. Mohammad et al.

TRANSPORTATION RESEARCH RECORD (2012)

Add to Collection

Review Chemistry, Physical

The colloidal structure of bitumen: Consequences on the rheology and on the mechanisms of bitumen modification

Didier Lesueur

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.