☆ 4.7 Article

Quantitative 3D characterization of chromite ore particles

MINERALS ENGINEERING (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Chemical

Particle classification of iron ore sinter green bed mixtures by 3D X-ray microcomputed tomography and machine learning

Kunning Tang et al.

Summary: The iron ore sintering process needs to be optimized to reduce energy consumption and carbon emissions, while producing high-quality sinter for low carbon blast furnace operations. 3D X-ray micro-computed tomography can provide particle-level information of iron ore mixtures, but algorithms are needed to identify and classify particles and establish the relationship between ore sources and sinter quality.

POWDER TECHNOLOGY (2023)

Add to Collection

Article Engineering, Environmental

A forecast on future raw material demand and recycling potential of lithium-ion batteries in electric vehicles

Franziska Maisel et al.

Summary: The study focuses on estimating the future demand for battery metals, such as lithium, cobalt, nickel, and manganese, for the production of electric vehicle battery cathode raw materials. The results indicate that by 2040, the future demand for lithium, cobalt, and nickel for Lithium-Ion Batteries in electric vehicles will exceed current raw material production. The recycling potential for lithium, nickel, and cobalt is more than half of the raw material demand in 2040, indicating the industry's need to scale up resource production and prioritize the recycling of battery metals.

RESOURCES CONSERVATION AND RECYCLING (2023)

Add to Collection

Article Geosciences, Multidisciplinary

3D Quantitative Mineral Characterization of Particles Using X-ray Computed Tomography

Jose Ricardo Assuncao Godinho et al.

Summary: A new method using X-ray computed micro-tomography (CT) is developed to measure and quantify the 3D mineralogical composition of particulate materials. This method standardizes the analysis of particles based on their microstructures without segmenting individual classes or grains. By considering the complexity of the particles and the partial volume effect, mineral abundances can be quantified at the particle level. The method demonstrates potential as a complement to 2D-based methods and as an alternative to traditional phase segmentation analysis of 3D images.

NATURAL RESOURCES RESEARCH (2023)

Add to Collection

Article Geochemistry & Geophysics

Systematic characterization of historical tailings for possible remediation and recovery of critical metals and minerals-The Yxsjoberg case

Jane Mulenshi et al.

Summary: With increasing environmental concerns in mining and demand for critical metals and minerals, historical tailings have become a focus of research. This paper proposes a conceptual framework for generating and structuring relevant information about historical tailings. A case study in Sweden demonstrates the application of this framework for analysis and research.

JOURNAL OF GEOCHEMICAL EXPLORATION (2021)

Add to Collection

Article Engineering, Chemical

Development and experimental validation of a texture-based 3D liberation model

Pratama Istiadi Guntoro et al.

Summary: Predicting mineral liberation through a texture-based 3D liberation model calibrated using experimental data measured in 3D mu CT can explain around 84% of the variance in the experimental liberation data. The generated particle population can be used for particle-based process simulation.

MINERALS ENGINEERING (2021)

Add to Collection

Article Engineering, Chemical

Uncertainties in quantitative mineralogical studies using scanning electron microscope-based image analysis

Rosie Blannin et al.

Summary: Scanning electron microscope-based automated mineralogy studies play a crucial role in geometallurgical investigations, but the reporting of uncertainties in quantitative data is often neglected. Using bootstrap resampling can provide robust estimates of statistical uncertainties for mineralogy and metal deportment in samples, highlighting the importance of adequate sampling statistics in quantitative mineralogical studies.

MINERALS ENGINEERING (2021)

Add to Collection

Article Geochemistry & Geophysics

Spectral Tomography for 3D Element Detection and Mineral Analysis

Jose R. A. Godinho et al.

Summary: This paper introduces a new 3D imaging technique, Spectral Computed Tomography (sp-CT), which can identify heavy elements inside materials to classify mineral phases. By analyzing the energy spectrum, sudden changes in transmission at element-specific K-edge energies can be identified, leading to enhanced mineral phase classification.

MINERALS (2021)

Add to Collection

Article Geochemistry & Geophysics

Mounted Single Particle Characterization for 3D Mineralogical Analysis-MSPaCMAn

Jose R. A. Godinho et al.

Summary: This paper presents a new method for classifying mineral phases in 3D images of particulate materials obtained by X-ray computed micro-tomography, which improves accuracy of phase classification, increases the number of detected phases, and allows measurement of individual particle statistics. The method broadens the applicability of 3D imaging techniques for particle analysis at low particle size to voxel size ratio.

MINERALS (2021)

Add to Collection

Review Multidisciplinary Sciences

X-ray computed tomography

Philip J. Withers et al.

Summary: This article outlines the basic principles, scanning methods, and applications of X-ray computed tomography (CT) in science and engineering. CT can be used for reconstructing 3D images, tracking material structural evolution, and addressing imaging artifact issues.

NATURE REVIEWS METHODS PRIMERS (2021)

Add to Collection

Article Geochemistry & Geophysics

The Robustness of the Gray Level Co-Occurrence Matrices and X-Ray Computed Tomography Method for the Quantification of 3D Mineral Texture

Marcelene Voigt et al.

MINERALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Processing of Complex Materials in the Copper Industry: Challenges and Opportunities Ahead

Gerardo Alvear Flores et al.

JOM (2020)

Add to Collection

Review Geochemistry & Geophysics

SEM-Based Automated Mineralogy and Its Application in Geo- and Material Sciences

Bernhard Schulz et al.

MINERALS (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Simulation-Based Exergy and LCA Analysis of Aluminum Recycling: Linking Predictive Physical Separation and Re-melting Process Models with Specific Alloy Production

J. Hannula et al.

JOURNAL OF SUSTAINABLE METALLURGY (2020)

Add to Collection

Review Geochemistry & Geophysics

X-ray Microcomputed Tomography (μCT) for Mineral Characterization: A Review of Data Analysis Methods

Pratama Istiadi Guntoro et al.

MINERALS (2019)

Add to Collection

Article Geochemistry & Geophysics

Accurate Measurement of Small Features in X-Ray CT Data Volumes, Demonstrated Using Gold Grains

R. A. Ketcham et al.

JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2019)

Add to Collection

Article Engineering, Chemical

Volume quantification in interphase voxels of ore minerals using 3D imaging

J. R. A. Godinho et al.

MINERALS ENGINEERING (2019)

Add to Collection

Article Engineering, Chemical

Experimental analysis of mineral liberation and stereological bias based on X-ray computed tomography and artificial binary particles

Takao Ueda et al.

ADVANCED POWDER TECHNOLOGY (2018)

Add to Collection

Article Engineering, Chemical

Quantifying mineral liberation by particle grade and surface exposure using X-ray microCT

F. Reyes et al.

MINERALS ENGINEERING (2018)

Add to Collection

Article Engineering, Chemical

Calibrated X-ray micro-tomography for mineral ore quantification

F. Reyes et al.

MINERALS ENGINEERING (2017)

Add to Collection

Article Engineering, Chemical

Quantitative analysis of exposed grain surface area for multiphase particles using X-ray microtomography

Y. Wang et al.

POWDER TECHNOLOGY (2017)

Add to Collection

Article Engineering, Chemical

3D image segmentation for analysis of multisize particles in a packed particle bed

Y. Wang et al.

POWDER TECHNOLOGY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Profex: a graphical user interface for the Rietveld refinement program BGMN

Nicola Doebelin et al.

JOURNAL OF APPLIED CRYSTALLOGRAPHY (2015)

Add to Collection

Article Engineering, Chemical

Benchmarking comminution energy consumption for the processing of copper and gold ores

G. R. Ballantyne et al.

MINERALS ENGINEERING (2014)

Add to Collection

Article Engineering, Chemical

Liberation-limited grade/recovery curves from X-ray micro CT analysis of feed material for the evaluation of separation efficiency

Jan D. Miller et al.

INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2009)

Add to Collection

Article Engineering, Chemical

3D characterization of individual multiphase particles in packed particle beds by X-ray microtomography (XMT)

A. R. Videla et al.

INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2007)

Add to Collection

© Peeref 2019-2024. All rights reserved.