☆ 4.6 Article

High-performance poly(methylsilane arylether arylacetylene) resins with low curing temperatures and weak secondary relaxations

JOURNAL OF APPLIED POLYMER SCIENCE (2023)

Related references

Note: Only part of the references are listed.

Article Polymer Science

Synthesis and properties of poly(silylene bis(ethynylphenoxy)diphenylsulfone)

Chuan Li et al.

Summary: Poly(silylene arylacetylene) resins with good mechanical properties and excellent heat resistance were synthesized and their structures and properties were characterized. The study found that the substituents on the main chain of the resin had slight effects on its thermal properties but significantly affected its processing and mechanical properties. Among them, the resin with phenyl substituent showed the best processability and mechanical performance.

POLYMER BULLETIN (2023)

Add to Collection

Article Polymer Science

Novel liquid phthalonitrile monomers towards high performance resin

Muyao Gao et al.

Summary: Phthalonitrile resins are high temperature resistant polymers with potential applications in harsh environments. Liquid phthalonitrile monomers containing flexible siloxane segments were designed to solve the problem of short processing windows caused by high melting points. The monomers demonstrated good thermal stability and high fluidity, allowing for processing at room temperature. Blending liquid and powdered monomers improved both processibility and temperature resistance of the cured resin.

EUROPEAN POLYMER JOURNAL (2023)

Add to Collection

Article Polymer Science

Thermal, mechanical and dielectric property enhancement of benzoxazine-containing phthalonitrile resin: The effect of functional oligomeric polyphenyl ether

Jiajia Ye et al.

Summary: Two oligomeric polyphenyl ethers (PPE) with different functional groups were added into benzoxazine-containing phthalonitrile resin to enhance the dielectric properties. The polymerization mechanism and comprehensive properties of the two systems were investigated. It was found that both hydroxyl-terminated PPE (PH) and allyl-terminated PPE (PA) effectively promoted the curing of phthalonitrile resin, but PH showed higher activity. PH could not chemically bond with the crosslinking network, while the allyl groups in PA improved thermal resistance and dimensional stability. PA system exhibited better dielectric properties, with Poly(MBP-30PA) showing the lowest dielectric constant of 2.88 at 1 MHz. The mechanical strength of the glass fiber reinforced composites was also enhanced in G(MBP-20PA).

POLYMER (2023)

Add to Collection

Article Polymer Science

Reducing the melting point and curing temperature of aromatic cyano-based resins simultaneously through a Bronsted acid-base synergistic strategy

Jianghuai Hu et al.

Summary: This study successfully reduced the melting points and curing temperatures of aromatic cyano-based resins through a Brunsted acid-base synergistic strategy. The blends showed a significant decrease in melting points and peak exothermic temperatures compared to their intrinsic components. Furthermore, the cured products demonstrated outstanding thermal and mechanical properties.

POLYMER (2022)

Add to Collection

Article Polymer Science

The curing reaction of phthalonitrile promoted by sulfhydryl groups with high curing activity

Yu Pu et al.

Summary: The thiophenol derivative MPD was synthesized to promote the curing reaction of phthalonitrile monomer 3BOCN. The study found that sulfhydryl groups have a high curing efficiency and lead to the formation of specific structures during the curing process. The cured resins show excellent thermal stability and high Tg.

POLYMER (2022)

Add to Collection

Article Materials Science, Characterization & Testing

Understanding the curing behaviors and properties of phthalonitrile containing benzoxazine with a new type of aniline curing agent

Xiaoqian Xu et al.

Summary: A promoted polymerization method for a phthalonitrile-based polymer was designed and its curing processes and behaviors were investigated. The results showed that this method could reduce the prepolymerization temperature, increase the polymerization rate and crosslinking degree, and form specific aromatic heterocyclic structures. The polymer exhibited outstanding thermal and mechanical properties.

POLYMER TESTING (2022)

Add to Collection

Article Polymer Science

Perfluorocyclobutyl aryl ether-based poly(silylene arylacetylene)s with a low dielectric constant for advanced wave-transparent composites

Changjun Gong et al.

Summary: This study successfully synthesized novel matrix materials with excellent mechanical properties, low dielectric constant, and high thermal stability, which are suitable for the aerospace industry. Among them, cured PSFCB-P displayed the best comprehensive performance. Quartz fiber cloth/PSFCB-P composites exhibited good dielectric properties and high mechanical properties in the high-frequency range.

EUROPEAN POLYMER JOURNAL (2022)

Add to Collection

Article Polymer Science

Study on aromatic nitrile-based resins containing both phthalonitrile and dicyanoimidazole groups

Wenjie Yang et al.

Summary: A novel class of autocatalytic aromatic nitrile-based resins PNDCI was designed and synthesized, which showed improved curing reactivity and thermal properties. The cured products of PNDCIs exhibited outstanding thermal stability and thermomechanical properties.

POLYMER (2022)

Add to Collection

Article Polymer Science

Ultra-high Tg and ultra-low CTE polyimide films based on tunable interchain crosslinking

Long Jiao et al.

REACTIVE & FUNCTIONAL POLYMERS (2022)

Add to Collection

Article Polymer Science

Fast curing phthalonitrile modified novolac resin: Synthesis, curing study and preparation of carbon and glass fibric composites

Daria I. Poliakova et al.

REACTIVE & FUNCTIONAL POLYMERS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Easy processable tris-phthalonitrile based resins and carbon fabric reinforced composites fabricated by vacuum infusion

M. V. Yakovlev et al.

Summary: Easy-processable phthalonitrile resins were prepared using novel viscosity reducing comonomer CPN. Different curing agents, aromatic diamine DDS and 4-(4-aminophenoxy) phthalonitrile APN, were used to study their effects on material properties. Carbon fabric composites with APN-cured matrix showed high compression strength and thermal aging sustainability, but post-curing at 375 degrees C resulted in decreased mechanical properties.

MATERIALS TODAY COMMUNICATIONS (2022)

Add to Collection

Article Polymer Science

Effect of the linking positions on the benzene ring on properties of poly(silane arylether arylacetylene)s

Jixian Li et al.

Summary: In this study, three aromatic diynes with different linking positions on the benzene ring were used to prepare PSEA resins. The effects of linking positions on the properties of PSEA resins were investigated. The results showed that the linking position affected the crystallinity, processability, density, water uptake, mechanical properties, and heat resistance of the resins.

JOURNAL OF POLYMER SCIENCE (2022)

Add to Collection

Article Polymer Science

Curing reaction and properties of a kind of fluorinated phthalonitrile containing benzoxazine

Dengxun Ren et al.

Summary: Introduction of fluorinated substituents in molecular chains is an efficient method to prepare materials with decreased dielectric constant and loss, as demonstrated in the synthesis of a kind of fluorinated phthalonitrile containing benzoxazine. The cured BPAF-ph showed double-stage curing reaction behaviors and good processability, with structures and properties being influenced by different post curing procedures. The glass fiber reinforced BPAF-ph composites exhibited promising properties in terms of thermal and mechanical stability.

EUROPEAN POLYMER JOURNAL (2021)

Add to Collection

Article Polymer Science

Effects of side alkoxy groups on the arylacetylene unit on properties of Poly (silylene arylacetylene)s

Jixian Li et al.

Summary: The research focused on the effects of different side alkoxy groups on poly(dimethylsilylene arylacetylene)s resins, with results showing that processability improved with longer side alkoxy groups, but flexural properties and heat resistance decreased.

EUROPEAN POLYMER JOURNAL (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Effects of pendant side groups on the properties of the silicon-containing arylacetylene resins with 2,5-diphenyl-[1,3,4]-oxadiazole moieties

Manping Ma et al.

Summary: The introduction of side aromatic groups in silicon-containing arylacetylene resins can effectively improve the processability of the resins, reduce crystallinities, while maintaining high modulus and good heat resistance.

RSC ADVANCES (2021)

Add to Collection

Article Chemistry, Applied

Tri-functional phthalonitrile monomer as stiffness increasing additive for easy processable high performance resins

M. V. Yakovlev et al.

REACTIVE & FUNCTIONAL POLYMERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Synthesis and Properties of a Silicon-Containing Arylacetylene Resin with 2,6-Diphenoxypyridine Unit

Manping Ma et al.

CHEMISTRYSELECT (2020)

Add to Collection

Article Polymer Science

Dendritic poly(silylene arylacetylene) resins based on 1,3,5-triethynylbenzene

Jiawei Luo et al.

EUROPEAN POLYMER JOURNAL (2020)

Add to Collection

Article Chemistry, Multidisciplinary

High-temperature phthalonitrile matrix containing silane fragments

Vladimir E. Terekhov et al.

MENDELEEV COMMUNICATIONS (2020)

Add to Collection

Article Polymer Science

Molecular design of interpenetrating fluorinated polyimide network with enhanced high performance for heat-resistant matrix

Dianrui Zhou et al.

POLYMER (2019)

Add to Collection

Article Polymer Science

Recyclable Cu(II)-Coordination Crosslinked Poly(benzimidazolyl pyridine)s as High-Performance Polymers

Cheng Wang et al.

MACROMOLECULAR RAPID COMMUNICATIONS (2018)

Add to Collection

Article Polymer Science

Processable, high T-g polyimides from unsymmetrical diamines containing 4-phenoxy aniline and benzimidazole moieties

Lala Rukh Sidra et al.

POLYMER (2018)

Add to Collection

Article Polymer Science

Processable poly(benzoxazole imide)s derived from asymmetric benzoxazole diamines containing 4-phenoxy aniline: synthesis, properties and the isomeric effect

Lala Rukh Sidra et al.

POLYMER CHEMISTRY (2018)

Add to Collection

Article Polymer Science

Effective Reduction of Volumetric Thermal Expansion of Aromatic Polyimide Films by Incorporating Interchain Crosslinking

Shinji Ando et al.

POLYMERS (2018)

Add to Collection

Article Polymer Science

Synthesis and properties of poly(dimethylsilylene-ethynylene-phenoxyphenoxyphenylene-ethynylene)

Huigao Chen et al.

HIGH PERFORMANCE POLYMERS (2017)

Add to Collection

Article Thermodynamics

Effect of neutral nickel catalyst on cure process of silicon-containing polyarylacetylene

Y. Shen et al.

THERMOCHIMICA ACTA (2014)

Add to Collection

Article Polymer Science

Poly(arylene benzimidazole)s as novel high-performance polymers

Guanjun Chang et al.

POLYMER JOURNAL (2013)

Add to Collection

Article Polymer Science

Novel soluble and optically active polyimides containing axially asymmetric 9,9′-spirobifluorene units: Synthesis, thermal, optical and chiral properties

Zuolin Wu et al.

POLYMER (2012)

Add to Collection

Article Polymer Science

Thermal stability of the copolymers of silicon-containing arylacetylene resin and acetylene-functional benzoxazine

Jian Zhang et al.

POLYMER DEGRADATION AND STABILITY (2011)

Add to Collection

Article Polymer Science

Synthesis and Properties of Novel Melt Processable Isomeric Polythioetherimides

Ying Han et al.

HIGH PERFORMANCE POLYMERS (2010)

Add to Collection

Article Polymer Science

Curing conditions of polyarylacetylene prepolymers to obtain thermally resistant materials

Wei-Chieh Tseng et al.

POLYMER DEGRADATION AND STABILITY (2009)

Add to Collection

Article Engineering, Manufacturing

Influence of fibre surface oxidation-reduction followed by silsesquioxane coating treatment on interfacial mechanical properties of carbon fibre/polyarylacetylene composites

Xuezhong Zhang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)

Add to Collection

© Peeref 2019-2024. All rights reserved.