☆ 4.6 Article

Role of Particle Size of Al2O3 Reinforcement on the Wear Performance of NiTi-Based Composites

METALS AND MATERIALS INTERNATIONAL (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Electrochemical dealloying of porous NiTi alloy: Porosity evolution, corrosion resistance, and biocompatibility behavior

S. A. Hosseini et al.

Summary: This study investigates the role and mechanism of electrochemical dealloying (ED) to decrease the nickel ion release and improve the biocompatibility of porous NiTi alloy. The results showed that ED treatment can effectively reduce the concentration of released nickel ions and improve cell adhesion and proliferation on the alloy surface by forming titanium oxide clusters and fine porous structures.

INTERMETALLICS (2023)

Add to Collection

Article Materials Science, Ceramics

B4C reinforced NiTi-based composites: Microstructure and wear performance

Omid Velayatipour et al.

Summary: In this study, NiTi-x wt.%B4C (x= 0, 2, and 4) composites were prepared and the effects of boron carbide reinforcement addition on the microstructure and wear behavior were investigated. The results showed that the addition of boron carbide increased the hardness and wear resistance of the composite samples, and changed the wear mechanisms.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2023)

Add to Collection

Article Materials Science, Multidisciplinary

High-Performance Self-Expanding NiTi Stents Manufactured by Laser Powder Bed Fusion

Xiang Li et al.

Summary: This study provides a comprehensive investigation into the performance of LPBF-produced self-expanding NiTi stents, including dimensional accuracy, relative density, surface quality, shape memory, superelasticity, and deployment capability. The results demonstrate that by optimizing laser beam compensation and electrochemical polishing processes, the stents can achieve high quality and meet medical requirements.

METALS AND MATERIALS INTERNATIONAL (2023)

Add to Collection

Article Engineering, Mechanical

Investigating the effect of operating temperature on the tribo-mechanical behavior of cold rolled superelastic nickel titanium alloy

Hyunsuk Choi et al.

Summary: NiTi alloys are important shape memory alloys with excellent mechanical properties. Austenitic NiTi alloys have been investigated for load-bearing applications due to their superelastic behavior and better mechanical properties compared to martensitic SMAs. Reciprocating tests at different temperatures showed lower friction coefficient and wear volume reduction at elevated temperatures. The wear mechanisms on NiTi shifted from abrasive to adhesive with increased temperature, and the counter balls shifted from adhesive to abrasive. Indentation testing revealed increased hardness and decreased Young's modulus at 200 degrees C, resulting in an increased Modell ratio.

WEAR (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of ceramic reinforcement characteristics on the microstructure and wear behavior of NiTi matrix composites

M. Farvizi et al.

Summary: By adding YSZ microparticles with a similar thermal expansion coefficient to NiTi alloy as reinforcement, the wear resistance and mismatch stress in the matrix can be improved. The use of YSZ instead of monoclinic zirconia as reinforcement reduces mismatch stress and increases the fraction of austenitic phase, leading to better shape memory and wear resistance properties.

MATERIALIA (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Fabrication, testing, and microstructural analysis of nitinol-based self-healing metal matrix composite of A356 alloy cast by semi-solid metal processing

Sumit Sharma et al.

Summary: This study analyzes the self-healing behavior of metal-matrix composites and prepares an aluminium-based self-healing metal-matrix composite using semi-solid metal processing technology. Shape memory wire is used to enable the material to recover from plastic strain, and nitinol exhibits a shape memory effect by phase transformation. Microstructural evaluation shows good integration of the reinforcement within the matrix material. Analysis of crack closure demonstrates a positive recovery rate of 44.277% of the deformed surface.

ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES (2023)

Add to Collection

Article Chemistry, Physical

Functionally oriented composite layered materials with martensitic transformations

Petr O. Rusinov et al.

Summary: The studies show that using functionally oriented surface composite materials with thermoelastic martensitic transformations can solve the task of ensuring reliability and expanding functionality of products under multifactorial effects. The authors proposed a technology for layer-by-layer synthesis of these composite materials and suggested thermal and thermomechanical treatment methods to decrease residual stress and improve durability. The tests demonstrated that steels with the composite surface laminate had a lower wear rate and higher cyclic durability.

SURFACE INNOVATIONS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Evolution of Phases and their Influence on Shape Memory Effect by Varying Sintering Parameters of NiTi Alloys

Swadhin Kumar Patel et al.

Summary: NITINOL is a popular and cost-effective shape memory alloy used in various industries. Utilizing powder technology route for manufacturing these SMAs can reduce post-processing, and the uniaxial press and sinter process can yield better density.

METALS AND MATERIALS INTERNATIONAL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructural Characterization and Wear Performance of NiTi-ZrO2 Composites

M. Farvizi et al.

Summary: This study investigated the effects of zirconia microparticles on the microstructure, martensitic transformation, and wear behavior of NiTi-based samples. Results showed that the addition of zirconia can enhance the stability and wear performance of the composite samples.

METALS AND MATERIALS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Stress Aging Induced Precipitates on Corrosion Behavior of NiTi Shape Memory Alloys

A. Radi et al.

Summary: The study found that increasing aging time and stress levels can improve the corrosion resistance of NiTi shape memory alloys, leading to better formation of a protective layer. Homogeneous precipitation of Ni-rich phases during the stress aging process improves the corrosion resistance of the alloy.

METALS AND MATERIALS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructures and Mechanical Properties of Equiatomic NiTi Shape Memory Alloy Undergoing Local Canning Compression and Subsequent Annealing

Dong Sun et al.

Summary: Local canning compression is applied to equiatomic NiTi shape memory alloy with complete B19' martensite, leading to different grain sizes after annealing at 300, 450 and 600 degrees C. The highest elastic limit is achieved under annealing at 300 degrees C, while the highest yield stress and good plasticity are observed under annealing at 450 degrees C. Annealing at 600 degrees C results in a relatively low yield stress but still higher than the as-received NiTi SMA, with high plasticity as well.

METALS AND MATERIALS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of Ta Content on Thermodynamic Properties and Transformation Temperatures of Shape Memory NiTi Alloy

F. Dagdelen et al.

METALS AND MATERIALS INTERNATIONAL (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Graphene Oxide/Silver Nanoparticle Coating Produced by Electrophoretic Deposition Improved the Mechanical and Tribological Properties of NiTi Alloy for Biomedical Applications

Dinesh Rokaya et al.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2019)

Add to Collection

Article Chemistry, Physical

Effect of Ni content and Hf addition on the unlubricated wear performance of Ni-rich NiTi alloys

Fengxiang Zhang et al.

INTERMETALLICS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Thermal mismatch stress relaxation and dislocation transformation of 45%SiCp/Al composites by continuous diode laser heating

Xianjun Kong et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Formation mechanism of Ni2Ti4Ox in NITI shape memory alloy

Wei-Yu Kai et al.

MATERIALIA (2019)

Add to Collection

Article Materials Science, Ceramics

Fabrication of NiTi and NiTi-nano Al2O3 composites by powder metallurgy methods: Comparison of hot isostatic pressing and spark plasma sintering techniques

M. Farvizi et al.

CERAMICS INTERNATIONAL (2018)

Add to Collection

Article Materials Science, Multidisciplinary

High Strain Rate Compression of Martensitic NiTi Shape Memory Alloy at Different Temperatures

Ying Qiu et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)

Add to Collection

Article Engineering, Chemical

Physical and tribological characteristics of porous NiTi SMA fabricated by powder metallurgy

Neeraj Sharma et al.

PARTICULATE SCIENCE AND TECHNOLOGY (2017)

Add to Collection

Article Metallurgy & Metallurgical Engineering

CHALLENGES OF USING ELEMENTAL NICKEL AND TITANIUM POWDERS FOR THE FABRICATION OF MONOLITHIC NiTi PARTS

M. Farvizi

ARCHIVES OF METALLURGY AND MATERIALS (2017)

Add to Collection

Article Materials Science, Composites

Effect of variable particle size reinforcement on mechanical and wear properties of 6061Al-SiCp composite

Adetayo Abdulmumin Adebisi et al.

COMPOSITE INTERFACES (2016)

Add to Collection

Article Chemistry, Physical

Compressive behavior of NiTi-based composites reinforced with alumina nanoparticles

Mohammad Farvizi et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Particle Size of Titanium and Nickel on the Synthesis of NiTi by TE-SHS

Pavel Novak et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2016)

Add to Collection

Article Engineering, Multidisciplinary

Effect of Particle Size on Microstructure and Mechanical Properties of Al-Based Composite Reinforced with 10 Vol.% Mechanically Alloyed Mg-7.4%Al Particles

Anil K. Chaubey et al.

TECHNOLOGIES (2016)

Add to Collection

Article Engineering, Mechanical

Effect of starting materials on the wear performance of NiTi-based composites

M. Farvizi et al.

WEAR (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of Al2O3 Nanopowders on the Wear Behavior of NiTi Shape Memory Alloys

Y. Sahin et al.

JOM (2014)

Add to Collection

Article Chemistry, Physical

Enhanced mechanical properties of spark plasma sintered NiTi composites reinforced with carbon nanotubes

Junho Lee et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of nano Al2O3 addition on mechanical properties and wear behavior of NiTi intermetallic

M. Farvizi et al.

MATERIALS & DESIGN (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Surface characterization and wear behavior of ion implanted NiTi shape memory alloy

Neonila Levintant-Zayonts et al.

VACUUM (2009)

Add to Collection

Article Thermodynamics

Metastable effects on martensitic transformation in SMA - Part VI. The clausius-clapeyron relationship

A. Isalgue et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Combustion synthesis and mechanical properties of dense NiTi-TiC intermetallic-ceramic composites

DE Burkes et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)

Add to Collection

Article Nanoscience & Nanotechnology

Spark plasma sintering of TiNi nano-powder

C Shearwood et al.

SCRIPTA MATERIALIA (2005)

Add to Collection

Article Nanoscience & Nanotechnology

Powder metallurgical fabrication processes for NiTi shape memory alloy parts

M Bram et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of TiN nano-particles on porosity and wear behavior of TiC/TiNi tribo composite

DY Li et al.

JOURNAL OF MATERIALS SCIENCE LETTERS (2001)

Add to Collection

Article Materials Science, Multidisciplinary

Influences of porosity on mechanical and wear performance of pseudoelastic TiNi-matrix composites

HZ Ye et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2001)

Add to Collection

Article Materials Science, Composites

Wear and friction of a new wear-resistant material: TiNi-based composites

HZ Ye et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.