Related references
Note: Only part of the references are listed.
Article
Nanoscience & Nanotechnology
Liangren Chen et al.
Summary: In this study, a flexible and transparent sensor with interlocked square column arrays containing Ag nanoparticles (AgNPs), citric acid (CA), and poly(vinyl alcohol) (PVA) was designed, inspired by the interlocked biological geometry of human skin. This sensor exhibited multisensory capabilities for pressure, temperature, and humidity. The interlocked AgNPs/CA/PVA sensor demonstrated high sensitivity, low detection limit, fast response, and outstanding stability as a flexible pressure sensor. Additionally, it also acted as a temperature and humidity sensor with high resolution and real-time detection capability.
ACS APPLIED MATERIALS & INTERFACES
(2023)
Article
Chemistry, Multidisciplinary
Huiyun Xiao et al.
Summary: A dual-mode sensor with two electrodes and tubular mechanically heterogeneous structure is reported, enabling simultaneous sensing of strain and temperature without cross-talk. The sensor structure consists of a thermocouple coiled around an elastic strain-to-magnetic induction conversion unit, revealing a giant magnetoelastic effect, and accommodating a magnetic amorphous wire. The dual-mode sensor exhibits interference-free temperature sensing performance with high coefficient and low strain and temperature detection limits. The use of these sensors in smart textiles to monitor continuously breathing, body movement, body temperature, and ambient temperature is demonstrated. The developed multifunctional wearable sensor is needed for applications in early disease prevention, health monitoring, and interactive electronics as well as for smart prosthetics and intelligent soft robotics.
ADVANCED FUNCTIONAL MATERIALS
(2023)
Article
Chemistry, Physical
Jun Ruan et al.
Summary: By inkjet printing high-refractive-index nanoparticles on the designated position of lasing microfiber arrays, the effective refractive index of the microcavities can be regulated, allowing for a simple encoding process to be conducted within a short period of time. Additionally, encapsulating the encoded microfiber arrays in polydimethylsiloxane reduces scattering loss and environmental interference, leading to the realization of a printable encryption chip.
Article
Chemistry, Multidisciplinary
Rui Wang et al.
Summary: This study demonstrates a flexible magnetoelectrical clothing generator that can generate electricity through arm swinging. Continuous magnetic yarns produced by a particle flow spinning method can be woven into fabrics at a low cost. The fabrics and conductive wires integrated into the armpit parts of the clothing can provide stable voltage and current output.
ADVANCED FUNCTIONAL MATERIALS
(2022)
Article
Multidisciplinary Sciences
Xiao-Chong Yu et al.
Summary: An ultrasensitive optofluidic biosensor based on microbubble cavity with interface whispering gallery modes is reported, which has a low detection limit and small sample consumption, enabling the detection of single DNA.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
(2022)
Article
Nanoscience & Nanotechnology
Li Zhang et al.
Summary: This study presents an ultrafast antisolvent deposition method to fabricate single-crystalline CsPbCl3 microplatelets (MPs). The as-grown MPs exhibit uniform morphology, strong emission, and outstanding gain property. Room temperature photoluminescence lasing is realized at 428 nm with low threshold and high net optical gain. These findings contribute to the fundamental understanding and optoelectronic applications of low-dimensional CsPbCl3 perovskite structures.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Article
Multidisciplinary Sciences
Limin Jin et al.
Summary: In this study, a general strategy based on the simultaneous design of electronic and optical states is proposed to achieve dynamically switchable single-mode lasing. By integrating reversely designed nanocrystals with size-mismatched coupled microcavities, a crosstalk-free violet-to-red single-mode behavior is experimentally demonstrated. This research provides insights into the reverse design of luminescent materials and opens up new opportunities for frontier applications.
NATURE COMMUNICATIONS
(2022)
Article
Polymer Science
Yen-Lung Chou et al.
Summary: This study describes the fabrication of an electrospun, U-shaped optical fiber sensor for temperature measurements. The sensor is based on single mode fibers and was fabricated into a U-shaped optical fiber sensor through flame heating. Electrospinning was applied to reduce the sensor's sensitivity to humidity. The results showed that longer electrospinning durations led to thicker sensor layers and higher sensor sensitivity.
Article
Chemistry, Multidisciplinary
Min Chen et al.
Summary: This paper introduces an intelligent health agent based on multifunctional fibers, which can achieve various functions including health monitoring, therapy, protection, and minimally invasive surgery. The future challenges and opportunities in healthcare and medicine are also discussed.
ADVANCED MATERIALS
(2022)
Article
Materials Science, Multidisciplinary
Jun Ruan et al.
Summary: This study proposes a gravity-assisted rotatory drawing method for fabricating multicolor lasing microfibers and weaving them into flexible textiles. Full-color tunable lasing textiles can be achieved by regulating the doped dyes and solution viscosity. Furthermore, nanoparticle patterns are printed on the lasing textile for anticounterfeiting application.
NPG ASIA MATERIALS
(2022)
Article
Materials Science, Multidisciplinary
Chi Pang et al.
Summary: This study presents a method for the fabrication of stable optoplasmonic microcavities by implanting silver nanoparticles and dispersed ions into nanomembrane-formed microtube cavities. The competition and transition between the redshift induced by the refractive index increase and blueshift induced by the formation of plasmonic nanoparticles are investigated. The presence of nanoparticles improves the quality factor of the microcavity modes.
ADVANCED OPTICAL MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Ran Li et al.
Summary: This paper presents a new strategy for ultrasensitive detection based on color-switchable lasing with a cavity-enhanced reduction of LOD, achieving highly sensitive detection of biomarkers. By embedding dye into polystyrene microsphere cavities, it enables in vivo compatible biomarker detection with improved visual distinguishability through color changes.
Article
Multidisciplinary Sciences
Ning Zhou et al.
Summary: This study reports the direct observation of lasing in microfiber-coupled single plasmonic nanoparticles enabled by strong mode coupling. The results show that single-mode laser emission from the nanoparticles can be achieved at room temperature with low threshold and narrow linewidth.
Review
Chemistry, Multidisciplinary
Wenjing Liu et al.
Summary: Optical microresonators have been widely studied for highly sensitive molecular detection and optical precision measurement. The combination of high quality factor and small mode volume in whispering-gallery mode microresonators enhances nonlinear light-matter interaction, enabling label-free molecule detection with ultrahigh sensitivity and specific spectral fingerprinting of molecules. These nonlinear optical sensors show promise for future research and applications in sensing technologies.
Article
Multidisciplinary Sciences
Xiang Shi et al.
Summary: Integrating display technology into textiles opens up exciting possibilities for smart electronic textiles, revolutionizing human-machine interactions and providing real-time communication tools for individuals with voice difficulties. This display textile, with its durable, flexible, and breathable design, offers stable brightness even when bent, stretched, or pressed, making it suitable for practical applications in various fields, including healthcare within the Internet of Things. This innovative approach combining electronic devices with textiles is expected to shape the next generation of electronics.
Article
Chemistry, Analytical
Robert D. Crapnell et al.
Summary: Electrospun nylon 6,6 fibers incorporating polypyrrole (PPy) molecular-imprinted polymers (MIPs) were produced for selective detection of D-glucose using a thermal detection methodology. The maximum incorporation of MIPs was found to be 12.1 wt %, demonstrating a linear working response to glucose samples in artificial sweat solutions.
ANALYTICAL CHEMISTRY
(2021)
Article
Optics
Shun Wang et al.
Summary: The low-cost fiber tip temperature sensor proposed is based on the Michelson interferometer structure and shows good sensitivity and stability. It is characterized by small size, low cost, and suitable for remote sensing applications.
OPTICS AND LASER TECHNOLOGY
(2021)
Article
Optics
Bessem Ben Doudou et al.
Summary: This paper investigates the optical and thermo-optical properties of PVA and PVA/SiO2 nanocomposite films, showing that the refractive index of PVA films increases with molecular weight, decreases with SiO2 concentration, and both have negative thermo-optic coefficients. The results suggest that PVA is a material with tunable refractive indices suitable for optical devices such as optical temperature sensors.
OPTICS COMMUNICATIONS
(2021)
Article
Optics
Zhenyong Dong et al.
Summary: This paper proposes a single core-offset Mach-Zehnder interferometer coated with polyvinyl alcohol for simultaneous measurement of relative humidity and temperature. The experimental results show that the sensor has good repeatability and high sensitivity, with potential applications for RH and temperature measurement.
Article
Multidisciplinary Sciences
Shaoning Zeng et al.
Summary: Incorporating passive radiative cooling structures into personal thermal management technologies can effectively enhance human resilience against intensifying global climate change. The large-scale woven metafabrics exhibit high emissivity and reflectivity due to their unique hierarchical-morphology design, providing ideal mechanical strength and breathability for commercial clothing. The cost-effectiveness and high performance of these metafabrics offer substantial advantages for intelligent garments, smart textiles, and passive radiative cooling applications.
Article
Chemistry, Multidisciplinary
Kun Ge et al.
Summary: A full-color whispering-gallery mode (WGM) laser has been developed by partitioning different light-emitting polymers in a nested microcavity. This laser emits red-green-blue light with high quality factor and narrow linewidth, showing low excitation threshold and wavelength tunability. The research demonstrates a simple method to fabricate a full-color WGM laser, with potential applications in compact lighting devices and white laser sources.
Article
Chemistry, Multidisciplinary
Zhiyi Yuan et al.
Summary: This study presents a novel concept of bioresponsive microlasers by utilizing interfacial energy transfer based on whispering-gallery-mode (WGM) microdroplet cavities. Manipulation of lasing wavelengths was achieved through changes in gain spectrum induced by energy transfer from binding molecular concentrations at the cavity surface. Tunable lasing wavelengths across a broad spectral range were demonstrated by selecting different donor/acceptor pairs, opening up new avenues for biodetection and providing insights into molecular modulation of laser light at the biointerface for the development of smart bio-photonic devices at the molecular level.
Article
Materials Science, Composites
Mufang Li et al.
COMPOSITES SCIENCE AND TECHNOLOGY
(2020)
Article
Engineering, Electrical & Electronic
Zhili Hao et al.
IEEE SENSORS JOURNAL
(2020)
Article
Optics
Yipeng Lun et al.
Article
Chemistry, Multidisciplinary
Hugo M. Doeleman et al.
Article
Nanoscience & Nanotechnology
Junhua Tong et al.
Article
Chemistry, Physical
Hanh Hong Mai et al.
Article
Chemistry, Multidisciplinary
Ruxue Li et al.
Review
Chemistry, Multidisciplinary
Ye Zhang et al.
ADVANCED FUNCTIONAL MATERIALS
(2019)
Article
Optics
N. A. N. Jaharudin et al.
Article
Multidisciplinary Sciences
Taketo Handa et al.
Editorial Material
Multidisciplinary Sciences
Jun Peng et al.
Article
Chemistry, Multidisciplinary
Zhitao Zhang et al.
ADVANCED MATERIALS
(2018)
Article
Chemistry, Multidisciplinary
Lie Wang et al.
ADVANCED FUNCTIONAL MATERIALS
(2018)
Article
Physics, Multidisciplinary
Xin Zhang et al.
Article
Optics
A. E. Shitikov et al.
Article
Chemistry, Multidisciplinary
Yuanchao Lv et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
(2017)
Article
Optics
Shancheng Yang et al.
Article
Optics
V. R. Anand et al.
Article
Optics
Fuxing Gu et al.
LIGHT-SCIENCE & APPLICATIONS
(2017)
Article
Chemistry, Multidisciplinary
Guang-Can Li et al.
Article
Optics
F. Lahoz et al.
Article
Physics, Multidisciplinary
Freek Ruesink et al.
PHYSICAL REVIEW LETTERS
(2015)
Article
Nanoscience & Nanotechnology
Rui Chen et al.
Article
Engineering, Electrical & Electronic
Ana Margarida Rodrigues Pinto et al.
JOURNAL OF LIGHTWAVE TECHNOLOGY
(2012)
Article
Multidisciplinary Sciences
Bumki Min et al.
Article
Optics
Fengnian Xia et al.
Article
Physics, Multidisciplinary
VS Ilchenko et al.
PHYSICAL REVIEW LETTERS
(2004)
Article
Optics
ML Gorodetsky et al.
JOURNAL OF THE OPTICAL SOCIETY OF AMERICA B-OPTICAL PHYSICS
(2000)
