☆ 4.7 Article

Low-temperature fabrication of Si3N4 ceramics with high thermal conductivities using a single Mg2Si sintering additive

CERAMICS INTERNATIONAL (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Fabrication and characterization of highly thermal conductive Si3N4/diamond composite materials

Dandan Wu et al.

Summary: A novel composite material using Si3N4 as the substrate and diamond particles as reinforcement was developed to enhance thermal conductivity and mechanical properties. The Ti coating on diamond particles promoted the formation of a strong bond at the diamond-Si3N4 interface, preventing graphitization. A sandwiched structure with alternating Si3N4 and Si3N4/Ti-coated diamond layers was designed to enable directional heat conduction. The fabricated Si3N4/diamond composites showed a significant increase in thermal conductivity, making them suitable for high-performance electronic devices.

MATERIALS & DESIGN (2023)

Add to Collection

Article Physics, Condensed Matter

Intrinsic electron mobility and lattice thermal conductivity of β-Si3N4 from first-principles

Yuan Li et al.

Summary: Silicon nitride based materials have been investigated for their potential applications in high-power electronics and next-generation gate dielectrics. This study focuses on the crucial characteristics of electron mobility and lattice thermal conductivity of %-Si3N4 using first-principles calculations. The predicted electron mobility and averaged lattice thermal conductivity at 300 K are 228.4 cm2/Vs and 325.06 W/m center dot K, respectively, showing good agreement with literature data. The results reveal the strong temperature dependence of electron mobility and the dominant scattering mechanisms at different carrier concentrations, as well as the limitations imposed by nanoscale grain sizes on thermal transport properties.

SOLID STATE COMMUNICATIONS (2023)

Add to Collection

Article Materials Science, Ceramics

Improved thermal conductivity of β-Si3N4 ceramics through the modification of the liquid phase by using GdH2 as a sintering additive

Weide Wang et al.

Summary: The addition of GdH2 increases the N/O ratio in the liquid phase, enhancing thermal conductivity while reducing flexural strength at high temperatures. This is mainly due to the exaggerated bimodal microstructure resulting from the substitution of Gd2O3 by GdH2.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Ceramics

Novel silicothermic reduction method to obtain Si3N4 ceramics with enhanced thermal conductivity and fracture toughness

Weide Wang et al.

Summary: The development of bimodal microstructure is crucial for the thermal conductivity and fracture toughness of Si3N4 ceramics. The combination of SRT and GPS was used to promote the development of bimodal microstructure, resulting in improved performance of the ceramic materials.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Ceramics

Microstructure and thermal conductivity of gas-pressure-sintered Si3N4 ceramic: the effects of Y2O3 additive content

Yinsheng Li et al.

Summary: The Y2O3 content in Si3N4 ceramics affects the microstructure and thermal conductivity, with higher Y2O3 content leading to changes in liquid phase behavior and grain size distribution. The microstructure significantly influences the thermal conductivity of the ceramics.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Ceramics

Thermal conductivity and mechanical properties of Si3N4 ceramics with binary fluoride sintering additives

Shengjun Liao et al.

Summary: In this study, silicon nitride ceramics were fabricated using different sintering additives, with samples doped with binary fluorides showing superior thermal conductivity and mechanical properties. The addition of YF3 reduced the grain growth exponent and activation energy, leading to improved properties in the Si3N4 ceramics.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Chemistry, Physical

Enhanced thermal conductivity in Si3N4 ceramics prepared by using ZrH2 as an oxygen getter

Weide Wang et al.

Summary: This study reports the two-step sintering process of Si3N4 doped with MgO and ZrH2, which improved thermal conductivity and microstructure of the material. The use of ZrH2 contributed to effective oxygen removal and densification of the Si3N4 ceramics.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Materials Science, Ceramics

YB2C2 : A new additive for fabricating Si3N4 ceramics with superior mechanical properties and medium thermal conductivity

Hanqin Liang et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Ceramics

Cost effective preparation of Si3N4 ceramics with improved thermal conductivity and mechanical properties

Yusen Duan et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Add to Collection

Article Materials Science, Ceramics

Effect of in-situ formed Y2O3 by metal hydride reduction reaction on thermal conductivity of β-Si3N4 ceramics

Weide Wang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Add to Collection

Article Computer Science, Information Systems

Automotive Power Module Packaging: Current Status and Future Trends

Yuhang Yang et al.

IEEE ACCESS (2020)

Add to Collection

Article Materials Science, Ceramics

Effect of MgF2 addition on mechanical properties and thermal conductivity of silicon nitride ceramics

Chunping Yang et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Materials Science, Ceramics

Low-temperature densification by plasma activated sintering of Mg2Si-added Si3N4

Jie Luo et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Materials Science, Ceramics

Enhanced thermal conductivity in Si3N4 ceramic with the addition of Y2Si4N6C

Yinsheng Li et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2018)

Add to Collection

Article Materials Science, Ceramics

Mechanical properties and thermal conductivity of Si3N4 ceramics with YF3 and MgO as sintering additives

Hanqin Liang et al.

CERAMICS INTERNATIONAL (2016)

Add to Collection

Review Materials Science, Multidisciplinary

Processing and Characterization of Aluminum Nitride Ceramics for High Thermal Conductivity

Hyun Min Lee et al.

ADVANCED ENGINEERING MATERIALS (2014)

Add to Collection

Article Materials Science, Ceramics

Fracture Resistance Behavior of High-Thermal-Conductivity Silicon Nitride Ceramics

You Zhou et al.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2014)

Add to Collection

Article Materials Science, Ceramics

High Thermal Conductivity Silicon Nitride Ceramics

Kiyoshi Hirao et al.

JOURNAL OF THE KOREAN CERAMIC SOCIETY (2012)

Add to Collection

Article Chemistry, Multidisciplinary

A Tough Silicon Nitride Ceramic with High Thermal Conductivity

You Zhou et al.

ADVANCED MATERIALS (2011)

Add to Collection

Review Materials Science, Ceramics

Thermodynamics and phase stability in the Si-O system

SM Schnurre et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2004)

Add to Collection

Article Materials Science, Ceramics

Effect of lattice impurities on the thermal conductivity of beta-Si3N4

H Yokota et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2003)

Add to Collection

Article Materials Science, Multidisciplinary

Molecular dynamics calculation of the ideal thermal conductivity of single-crystal α- and β-Si3N4 -: art. no. 134110

N Hirosaki et al.

PHYSICAL REVIEW B (2002)

Add to Collection

Article Materials Science, Ceramics

MgSiN2 addition as a means of increasing the thermal conductivity of β-silicon nitride

H Hayashi et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.