☆ 4.7 Article

Effect of fin design and continuous cycling on thermal performance of PCM-HP hybrid BTMS for high ambient temperature applications

JOURNAL OF ENERGY STORAGE (2023)

Related references

Note: Only part of the references are listed.

Review Engineering, Mechanical

A review of thermal management methods for electric vehicle batteries based on heat pipes and PCM

Vivek Thawkar et al.

Summary: This paper presents a comprehensive review of heat pipe-based battery thermal management systems in electric and hybrid vehicles, including flat heat pipes, oscillating heat pipes, micro-heat pipes, and hybrid (heat pipe + phase change material) systems. The research findings indicate that heat pipe-based hybrid systems outperform other systems. Additionally, the paper discusses the potential advantages, challenges, and future opportunities of using heat pipes to enhance the installation and operation of electric vehicles.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2023)

Add to Collection

Article Energy & Fuels

Novel metallic separator coupled composite phase change material passive thermal design for large format prismatic battery pack

Virendra Talele et al.

Summary: In order to improve the operating performance of lithium-ion battery packs under different charging rates and higher ambient temperatures, a thermal management system composed of a phase change material and a passive metallic connection is proposed. The thermal performance of the battery pack is investigated at constant charge rates of 1C, 2C, 3C, and the harshest 4C rate. Three configurations are studied, and the results show that the proposed improved thermal design with a graphene-enhanced high thermal conductive metallic separator is effective in increasing the temperature delay effect. The comparison between paraffin wax PCM and EG CPCM suggests that EG CPCM provides better delay effect due to its higher thermal conductivity and greater heat transfer performance.

JOURNAL OF ENERGY STORAGE (2023)

Add to Collection

Article Thermodynamics

Experimental and Numerical Investigation of Thermal Performance of an Air-Cooled Battery Module Under High Ambient Temperature Conditions

Dinesh Kumar Sharma et al.

Summary: Lithium-ion batteries (LiBs) are widely used in electric vehicles due to their high energy and power density. The thermal performance of an air-cooled battery module containing 16 high-energy density LiBs was investigated through experiments and simulations. The study found that temperature rise, temperature non-uniformity, and maximum temperature of the module's battery cells were important factors in evaluating the thermal performance. Increasing airflow rate decreased temperature but increased pressure drop, and high ambient temperatures affected LiB temperatures significantly, requiring additional cooling methods.

JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS (2023)

Add to Collection

Review Thermodynamics

A comprehensive review on heat pipe based battery thermal management systems

Delika M. Weragoda et al.

Summary: Heat pipes are receiving increasing interest in the thermal management of EV and HEV battery packs due to their superconductive capability, robustness, low maintenance, and longevity. However, the lack of understanding about their limitations during rapid heat fluctuations, adverse environmental conditions, performance under multiple heat loads, failure criteria in battery thermal management, and the lack of simple and versatile thermal models are hindering the commercialization of heat pipe-based battery thermal management systems. This comprehensive review aims to address these issues and provide insights for further development of this promising thermal management system.

APPLIED THERMAL ENGINEERING (2023)

Add to Collection

Article Energy & Fuels

Novel approach for the performance augmentation of phase change material integrated battery thermal management system for number of charging/discharging cycles

Jay R. R. Patel et al.

Summary: With the development of fast charging unit for electric vehicles (EVs) battery, it is important to develop an effective thermal management system to maintain the battery temperature in the desired range. The use of phase change material (PCM)-based battery thermal management system (BTMS) is found to be effective in maintaining the temperature during charging/discharging cycles. The addition of fins and a rest time between cycles further improves the performance of the PCM-around-cell BTMS.

ENERGY STORAGE (2023)

Add to Collection

Article Energy & Fuels

Hybrid battery thermal management by coupling fin intensified phase change material with air cooling

Shakeel Ahmad et al.

Summary: Combining metal fins with phase change material and air cooling can optimize the thermal management of lithium-ion batteries, reducing the battery temperature. Under the optimized design, the battery temperature can be controlled below 40 degrees Celsius with low power consumption.

JOURNAL OF ENERGY STORAGE (2023)

Add to Collection

Article Energy & Fuels

Introducing a flexible insulation network to the expanded graphite-based composite phase change material to enhance dielectric and mechanical properties for battery thermal management

Kaixin Yang et al.

Summary: In this study, a novel composite phase change material (CPCM) with high resistivity and flexibility was synthesized for battery thermal management. The CPCM exhibited high energy storage density (156.5 J/g), improved resistivity (2700 Omega.cm), and excellent thermal conductivity (3.4 W/m.K). It effectively managed the temperature of battery pack during high-rate discharge cycles, maintaining the operating temperature within 45 degrees C and temperature difference within 2 degrees C. This research provides a promising choice for efficient heat-related applications.

JOURNAL OF ENERGY STORAGE (2023)

Add to Collection

Article Energy & Fuels

An experimental investigation and hybrid neural network modelling of thermal management of lithium-ion batteries using a non-paraffinic organic phase change material, Myristyl alcohol

V. Muthya Goud et al.

Summary: The usage of electric vehicles is increasing worldwide to reduce greenhouse gas emissions and decrease oil dependence. Li-ion batteries have a promising future due to their lightweight, high energy density, and long lifespan. Cooling strategies, particularly with the use of phase change materials (PCM), are essential for improving the lifespan, safety, and performance of Li-ion batteries. In this study, experiments were conducted to compare natural convection air cooling with PCM-assisted cooling, and it was found that PCM-assisted cooling significantly reduced the battery module's maximum temperature and increased the time the module remained within desired operating conditions. Furthermore, a prediction model using ANFIS was developed to estimate the battery module's maximum temperature values and showed high accuracy.

JOURNAL OF ENERGY STORAGE (2023)

Add to Collection

Article Energy & Fuels

Thermal performance enhancement of a passive battery thermal management system based on phase change material using cold air passageways for lithium batteries

Y. Salami Ranjbaran et al.

Summary: The hybrid battery thermal management system (BTMS), which combines an active thermal management system (TMS) and a passive TMS based on phase change material (PCM), is effective in maintaining battery temperature within a suitable range. It provides greater cooling effect compared to a passive TMS and consumes less energy than an active TMS. The research findings show that the structure of the active TMS plays a crucial role in thermal management. Simulation and study of different cooling duct structures and cold air stream pressure differences confirm the safety and effectiveness of the proposed hybrid BTMS in temperature control.

JOURNAL OF ENERGY STORAGE (2023)

Add to Collection

Article Energy & Fuels

Low-cost and highly thermally conductive lauric acid-paraffin-expanded graphite multifunctional composite phase change materials for quenching thermal runaway of lithium-ion battery

Guanhua Zhang et al.

Summary: The article introduces a composite phase change material (CPCMs), which solves the problems of high phase change temperature, low thermal conductivity, and easy leakage in the application of phase change materials by incorporating a mixture of lauric acid (LA) and paraffin (PA) with an expanded graphite (EG) thermally conductive unit. The designed CPCMs have high thermal conductivity, low melting temperature, and improved melting enthalpy, and can be used as a cooling system in battery thermal management systems to keep the maximum temperature of the battery below 43 degrees Celsius while ensuring long-term cycling stability.

ENERGY REPORTS (2023)

Add to Collection

Article Thermodynamics

Numerical study of PCM thermal behavior of a novel PCM-heat pipe combined system for Li-ion battery thermal management

Peng Peng et al.

Summary: This study develops a three-dimensional numerical model to investigate the thermal behavior of a cylindrical lithium-ion battery module with a compact hybrid cooling system of phase change material (PCM) and heat pipes. The results show that the discharge process, PCM properties, and charge-discharge cycles affect the distribution of PCM liquid fraction, temperature difference, and thermal performance of the battery module.

APPLIED THERMAL ENGINEERING (2022)

Add to Collection

Article Energy & Fuels

Phase change material selection using simulation-oriented optimization to improve the thermal performance of lithium-ion battery

Jay R. Patel et al.

Summary: Battery thermal management system using phase change material (PCM) is crucial in maintaining battery temperature in Electric Vehicles. This study proposes the most suitable PCM for BTMS by analyzing different commercially available PCMs under various charging rates and ambient conditions. The study finds that the PCM selection should prioritize ambient temperature rather than charging rate, and identifies specific PCMs that can successfully maintain battery temperature within a safe range.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Engineering, Chemical

Modeling analysis on the cooling efficiency of composite phase change material-heat pipe coupling system in battery pack

Ziyi Tang et al.

Summary: This study investigates the thermal management of batteries using phase change material (PCM) cooling and heat pipe. The results show that the copper foam-paraffin composite PCM has high thermal conductivity and the heat pipe can disperse heat effectively. Numerical simulations demonstrate that the system can meet the working requirements of modules under different environments and charging rates. Refrigeration or liquid cooling should be considered for high-temperature and high-rate conditions. Additionally, reducing the Y space between battery cells is beneficial for cost-saving and energy density improvement.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2022)

Add to Collection

Article Engineering, Multidisciplinary

Investigations on effect of arrangement of fins on melting performance of vertical PCM enclosure (3D simulation using FVM methods)

Suhong Liu et al.

Summary: The study investigated the effect of different forms of rectangular fins on the melting performance of a vertical enclosure filled with phase change material (PCM). It was found that optimal melting efficiency was achieved when two of the three fins were placed in the lower half, resulting in significant improvements in overall melting time.

ALEXANDRIA ENGINEERING JOURNAL (2022)

Add to Collection

Review Energy & Fuels

Phase change materials for thermal management and energy storage: A review

Radhi Abdullah Lawag et al.

Summary: This paper provides a general review of recent studies on the use of phase change materials for thermal management of electronics and energy storage. It discusses the causes of device failure and methods for controlling it. The paper also gives an overview of PCMs types and their characteristics and applications. It focuses on thermal energy storage applications and methods for enhancing the thermal conductivity of PCMs. Furthermore, it discusses various parameters affecting the performance of heat sinks with TCE-PCM.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Chemistry, Physical

Lithium-Ion Battery Degradation: Measuring Rapid Loss of Active Silicon in Silicon-Graphite Composite Electrodes

Niall Kirkaldy et al.

Summary: This study investigates the aging of commercial batteries with silicon-graphite (Si-Gr) electrodes and finds that the loss of silicon is worse than graphite under all conditions, especially low state-of-charge and high temperature. The results indicate that the increased capacity conferred by silicon comes at the expense of reduced lifetime. Limiting the depth-of-discharge of the batteries can extend their lifetime.

ACS APPLIED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Overpotential analysis of graphite-based Li-ion batteries seen from a porous electrode modeling perspective

Zhiqiang Chen et al.

Summary: This study discusses the overpotential of Li-ion batteries and its influence on power and energy densities, introducing a method for decomposing the total overpotential using a P2D model. It shows that the four components of overpotential are strongly influenced by battery parameters and reaction-rate distribution within the porous electrode.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Review Energy & Fuels

A review on air cooled and air centric hybrid thermal management techniques for Li-ion battery packs in electric vehicles

Dinesh Kumar Sharma et al.

Summary: Electric vehicles are gradually replacing internal combustion engine vehicles due to rising environmental pollution. Lithium-ion batteries are widely used in EVs, but effective thermal management is crucial. This review aims to provide directions for the design and development of efficient air-cooled and hybrid air-cooled BTMS for EVs.

JOURNAL OF ENERGY STORAGE (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Reducing cobalt from lithium-ion batteries for the electric vehicle era

Hoon-Hee Ryu et al.

Summary: The increase in global sales of electric vehicles is attributed to high energy-density lithium-ion batteries, with a focus on reducing the use of cobalt in cathodes. A comparison of different cathode types in terms of performance and cost efficiency is made to evaluate their commercial viability for future electric vehicles, highlighting the challenges and strategies for developing advanced cathodes.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Thermodynamics

Optimization of the internal fin in a phase-change-material module for battery thermal management

Jingwen Weng et al.

APPLIED THERMAL ENGINEERING (2020)

Add to Collection

Article Energy & Fuels

Experimental study of a direct evaporative cooling approach for Li-ion battery thermal management

Rui Zhao et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)

Add to Collection

Article Energy & Fuels

Evaluation of volume change in phase change materials during their phase transition

Luisa F. Cabeza et al.

JOURNAL OF ENERGY STORAGE (2020)

Add to Collection

Review Thermodynamics

Thermophysical properties and applications of nano-enhanced PCMs: An update review

Liu Yang et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

Add to Collection

Article Energy & Fuels

Effect of current on cycle aging of lithium ion batteries

S. Barcellona et al.

JOURNAL OF ENERGY STORAGE (2020)

Add to Collection

Article Thermodynamics

Performance of beeswax phase change material (PCM) and heat pipe as passive battery cooling system for electric vehicles

Nandy Putra et al.

CASE STUDIES IN THERMAL ENGINEERING (2020)

Add to Collection

Article Chemistry, Physical

Recent developments in the passive and hybrid thermal management techniques of lithium-ion batteries

Jay R. Patel et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Energy & Fuels

Lithium-ion battery thermal management using heat pipe and phase change material during discharge-charge cycle: A comprehensive numerical study

Z. Y. Jiang et al.

APPLIED ENERGY (2019)

Add to Collection

Article Thermodynamics

Theoretical modeling and optimization of fin-based enhancement of heat transfer into a phase change material

Amirhossein Mostafavi et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Add to Collection

Review Energy & Fuels

Applications of combined/hybrid use of heat pipe and phase change materials in energy storage and cooling systems: A recent review

Hafiz Muhammad Ali

JOURNAL OF ENERGY STORAGE (2019)

Add to Collection

Review Chemistry, Physical

Electric vehicles batteries thermal management systems employing phase change materials

Lucia Ianniciello et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Review Energy & Fuels

Batteries and fuel cells for emerging electric vehicle markets

Zachary P. Cano et al.

NATURE ENERGY (2018)

Add to Collection

Article Thermodynamics

Experimental investigation on the thermal performance of heat pipe-assisted phase change material based battery thermal management system

Weixiong Wu et al.

ENERGY CONVERSION AND MANAGEMENT (2017)

Add to Collection

Article Thermodynamics

Experimental study on the thermal management performance of phase change material coupled with heat pipe for cylindrical power battery pack

Jiateng Zhao et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2017)

Add to Collection

Article Electrochemistry

Calendar Aging and Gas Generation in Commercial Graphite/NMC-LMO Lithium-Ion Pouch Cell

Z. Mao et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Add to Collection

Article Thermodynamics

Thermal optimization of composite phase change material/expanded graphite for Li-ion battery thermal management

Guiwen Jiang et al.

APPLIED THERMAL ENGINEERING (2016)

Add to Collection

Article Thermodynamics

Thermal management analysis of a Li-ion battery cell using phase change material loaded with carbon fibers

Fereshteh Samimi et al.

ENERGY (2016)

Add to Collection

Article Thermodynamics

Experiment study of oscillating heat pipe and phase change materials coupled for thermal energy storage and thermal management

Jiateng Zhao et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

Add to Collection

Article Thermodynamics

Numerical studies of lithium-ion battery thermal management systems using phase change materials and metal foams

Morteza Alipanah et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

Add to Collection

Article Thermodynamics

Thermal conductivity enhancement of lauric acid phase change nanocomposite with graphene nanoplatelets

Sivasankaran Harish et al.

APPLIED THERMAL ENGINEERING (2015)

Add to Collection

Article Thermodynamics

Experimental investigation of phase change material melting in rectangular enclosures with horizontal partial fins

Babak Kamkari et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)

Add to Collection

Article Thermodynamics

Heat transfer and thermal management with PCMs in a Li-ion battery cell for electric vehicles

N. Javani et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)

Add to Collection

Article Chemistry, Physical

Numerical model of the passive thermal management system for high-power lithium ion battery by using porous metal foam saturated with phase change material

Z. G. Qu et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)

Add to Collection

Article Thermodynamics

Experimental investigation on melting heat transfer characteristics of lauric acid in a rectangular thermal storage unit

Hossein Shokouhmand et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2013)

Add to Collection

Article Chemistry, Physical

Active (air-cooled) vs. passive (phase change material) thermal management of high power lithium-ion packs: Limitation of temperature rise and uniformity of temperature distribution

Rami Sabbah et al.

JOURNAL OF POWER SOURCES (2008)

Add to Collection

Article Thermodynamics

Heat transfer studies of a heat pipe

Vikas Kumar et al.

HEAT TRANSFER ENGINEERING (2007)

Add to Collection

Article Chemistry, Physical

Thermal modeling of secondary lithium batteries for electric vehicle/hybrid electric vehicle applications

S Al-Hallaj et al.

JOURNAL OF POWER SOURCES (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.