Related references
Note: Only part of the references are listed.
Article
Mathematics, Applied
Farooq Hussain et al.
Summary: This study presents a numerical simulation of boundary layer flow with heat transfer, focusing on the influence of nonlinear thermal radiation. The effects of Joule heating and viscous dissipation on the thermal enhancement of magnetohydrodynamics (MHD) are also considered. Dimensional analysis is used to determine the hydro and thermal boundary layer thickness for two-dimensional flow, and the problem is solved numerically using the Runge-Kutta Fehlberg (RKF) method with the Shooting technique. The study highlights the mechanical and aeronautical applications of thermal radiation, and nonlinear thermal radiation is found to be more effective for highly viscous fluids.
ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK
(2023)
Article
Physics, Multidisciplinary
Z. Abbas et al.
Summary: Roll coating is an important technique in the coating industry, used in applications such as wallpaper, magnetic records, photographic and plastic films. This theoretical study focuses on the flow of micropolar fluid in a forward roll coating, considering factors such as pressure, roll-separating force, separation point, flow rate, and power input. Numerical techniques are used to calculate these engineering parameters, along with obtaining closed-form solutions for velocity, pressure gradient, temperature distribution, and microrotation. Graphs are used to analyze the effects of various parameters on pressure, velocity, pressure gradient, shear stress, and temperature distribution. The study finds that velocity profile, power input, and separation points are decreasing functions of the parameters, and fluid particle rotations affect the pressure distribution and coating thickness.
EUROPEAN PHYSICAL JOURNAL PLUS
(2023)
Article
Physics, Applied
Ghulam Rasool et al.
Summary: This computational study investigates the impact of alumina and copper on the flow of a nanofluid based on engine oil through a Darcy-Forchheimer porous media. The study incorporates generalized radiative heat and mass transport rules and solves the governing nonlinear Navier-Stokes equations using a numerical RK-45 approach combined with the shooting methodology. The findings demonstrate that the velocity decreases with an increase in the Forchheimer number, and the velocity profile improves with a higher volume percentage of nanoparticles.
INTERNATIONAL JOURNAL OF MODERN PHYSICS B
(2023)
Article
Physics, Applied
M. A. Javed et al.
Summary: In this paper, a non-isothermal study of calendering processes was conducted using the Carreau-Yasuda model and a nonlinear slip condition. The flow equations were developed and simplified using dimensionless variables and a lubrication approximation theory. Numerical methods were used to solve the equations and analyze the impact of material parameters on various quantities of interest. The results showed that the pressure distribution decreased with increasing slip parameter and Weissenberg number, while the mechanical variables increased. The temperature distribution increased with increasing Brinkman number, but decreased near the roll surface with increasing slip parameter. The force separating the rollers and the power input increased with increasing Weissenberg number and slip parameters. Interestingly, the Carreau-Yasuda model predicted 30% less pressure in the nip region compared to the Newtonian model in shear thinning conditions.
INTERNATIONAL JOURNAL OF MODERN PHYSICS B
(2023)
Article
Thermodynamics
S. Saleem et al.
Summary: This article investigates the flow of nanofluids with heat transfer. The non-Newtonian fluid is modeled using the Ellis fluid model and considered as a physiological fluid in a complex divergent wavy channel. Blood and gold are used to create the nanofluid with their thermophysical properties. The mathematical formulation of the nanosuspension is based on the single-phase model. The governing differential equations for heat and mass transfer are derived using the long wavelength approximation and assumption of low Reynolds number. A closed-form solution is obtained after complex mathematical manipulations. The electrochemical potential of ions for electro-osmotic flow is derived by incorporating the Poisson-Boltzmann differential equation. The numerical data is found to align with existing literature for the limiting case. Visual graphics show an initial increase in nanofluid convection due to the flexibility of the channel allowing additional introduction of nano species up to 20%. However, for the region 1 < x < 1.5, the opposite trend is observed. The conduction of heat produced by viscous dissipation is outpaced by a higher Brinkman number (Br > 1), resulting in a decrease in heat transfer and cooling effects on the system. Larger boluses, indicating strong resistive forces, are observed for higher electro-osmotic parameters (UHS = 3).
CASE STUDIES IN THERMAL ENGINEERING
(2023)
Article
Polymer Science
Zaheer Abbas et al.
Summary: The study on blade coating process shows that increasing the Weissenberg number and viscosities ratio results in reduced coating thickness and increased blade load, making them important controlling parameters. Additionally, these parameters have significant impacts on the velocity and pressure profiles.
IRANIAN POLYMER JOURNAL
(2022)
Article
Chemistry, Physical
Shreen El-Sapa
Summary: A semi-analytical investigation of a quiescent micropolar fluid between a rigid sphere and a nonconcentric spherical envelope with a slip regime has been obtained. The numerical solution shows excellent convergence for different parameter settings.
JOURNAL OF MOLECULAR LIQUIDS
(2022)
Article
Physics, Multidisciplinary
Z. Abbas et al.
Summary: This paper analyzed the coating thickness of Sutterby fluid during isothermal blade coating, focusing on the case of plane coater and exponential coater. Lubrication theory and numerical methods were used to simplify and solve the governing equations. The results showed that the coating thickness increased and the blade load decreased as the fluid parameter increased. Optimizing the Sutterby fluid parameter can improve the coating process and substrate life.
Article
Thermodynamics
Zaheer Abbas et al.
Summary: This paper addresses the analysis of chemical reaction for peristaltic movement of electrically conducting Sisko fluid in an asymmetric tapered channel with velocity slip condition. The significant results of the current studies are that fluid velocity enhances for Darcy number and Sisko fluid parameter.
ADVANCES IN MECHANICAL ENGINEERING
(2022)
Article
Polymer Science
Sabeeh Khaliq et al.
Summary: The study examines the blade coating process of viscous fluid with temperature-dependent viscosity using plane and exponential coaters. It is found that temperature variations result in decreased maximum pressure, coating thickness, and blade load, leading to improved efficiency and substrate life in the coating process.
JOURNAL OF POLYMER ENGINEERING
(2021)
Article
Multidisciplinary Sciences
Mubbashar Nazeer
Summary: This study presents a comparative analysis of two-dimensional cross flow of non-Newtonian fluid with heat and mass transfer. Eyring-Powell fluid is chosen as the main carrier, and effects of suction and porous walls are considered. Perturbation technique and Range-Kutta method are employed to obtain a sustainable and approximate solution, showing complete agreement between numerical and series solutions.
SN APPLIED SCIENCES
(2021)
Article
Engineering, Chemical
Sabeeh Khaliq et al.
Summary: A mathematical model was developed to study the rheological and viscoelastic effects of a Simplified Phan-Thien-Tanner fluid passing between a blade and moving substrate. The study shows that viscoelastic effects significantly impact pressure and load on the blade, leading to better coating quality and extending the life of the moving substrate.
POLYMER ENGINEERING AND SCIENCE
(2021)
Article
Materials Science, Coatings & Films
X. Wang et al.
JOURNAL OF PLASTIC FILM & SHEETING
(2020)
Article
Engineering, Chemical
Muhammad Mughees et al.
POLYMER ENGINEERING AND SCIENCE
(2020)
Article
Multidisciplinary Sciences
Marya Kanwal et al.
SN APPLIED SCIENCES
(2020)
Review
Materials Science, Coatings & Films
M. Sajid et al.
JOURNAL OF PLASTIC FILM & SHEETING
(2019)
Article
Polymer Science
Hasan Shahzad et al.
JOURNAL OF POLYMER ENGINEERING
(2019)
Article
Chemistry, Physical
N. Ali et al.
ZEITSCHRIFT FUR NATURFORSCHUNG SECTION A-A JOURNAL OF PHYSICAL SCIENCES
(2018)
Article
Nanoscience & Nanotechnology
M. A. Rana et al.
JOURNAL OF NANOFLUIDS
(2018)
Article
Materials Science, Multidisciplinary
A. M. Siddiqui et al.
RESULTS IN PHYSICS
(2017)
Article
Materials Science, Multidisciplinary
Arif Hussain et al.
RESULTS IN PHYSICS
(2017)
Article
Mechanics
M. Y. Malik et al.
JOURNAL OF MECHANICS
(2016)
Article
Nanoscience & Nanotechnology
M. Y. Malik et al.
Article
Mathematics
Masood Khan et al.
QUAESTIONES MATHEMATICAE
(2013)
Article
Computer Science, Interdisciplinary Applications
Masood Khan et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS
(2010)
Article
Thermodynamics
M. Khan et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
(2010)
Article
Mathematics
A. M. Siddiqui et al.
MATHEMATICAL MODELLING AND ANALYSIS
(2009)
Article
Engineering, Chemical
M. Khan et al.
TRANSPORT IN POROUS MEDIA
(2008)
