Related references
Note: Only part of the references are listed.
Review
Chemistry, Applied
V. M. Leal et al.
Summary: Lithium-ion batteries are widely used due to their high energy density, capacitance, durability, and safety. However, their widespread use leads to the generation of electronic waste. Battery recycling can minimize environmental contamination and reduce production costs by recovering valuable raw materials. Various methods such as pyrometallurgical, biometallurgical, and hydrometallurgical processes are used for recycling. Environmentally friendly methods for battery recycling and material synthesis need to be developed.
JOURNAL OF ENERGY CHEMISTRY
(2023)
Article
Chemistry, Multidisciplinary
Viet Phuong Nguyen et al.
Summary: A dense sulfur electrode containing heavy TiS2/TiO2@MXene heterostructures has been developed to address the poor cycling stability and low volumetric energy density of lithium-sulfur batteries. The TiS2/TiO2@MXene heterostructures effectively suppress the shuttle effects and enhance the electrochemical reactions, resulting in superior cyclability and high energy density.
ADVANCED FUNCTIONAL MATERIALS
(2023)
Article
Chemistry, Multidisciplinary
Shen Wang et al.
Summary: Sulfurized polyacrylonitrile (SPAN) is a type of sulfur-bonded polymer that exhibits stable cycles in lithium-sulfur batteries. However, its exact molecular structure and electrochemical reaction mechanism are still unclear. In this study, using a SPAN thin film platform and various analytical tools, it was found that the capacity loss of SPAN is associated with intramolecular dehydrogenation and the loss of sulfur, resulting in an increase in aromaticity and electronic conductivity. The presence of a conductive carbon additive in the cathode promotes the completion of the reaction. A synthesis procedure was developed based on the proposed mechanism to reduce the irreversible capacity loss by more than 50%. These findings provide insights for the design of high-performance sulfurized polymer cathode materials.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
(2023)
Article
Multidisciplinary Sciences
Yanfei Zhu et al.
Summary: Composite-polymer-electrolytes (CPEs) embedded with an unsaturated coordination Prussian blue analog (UCPBA) filler demonstrate fast and preferential Li+ conduction through a chemically stable electrolyte/filler interface (EFI). The unsaturated Co-O coordination in UCPBA ensures a stable EFI and prevents side reactions, while the Lewis-acid metal centers attract the Lewis-base anions of Li salts, enhancing Li+ disassociation and transference number (tLi+). These CPEs exhibit high room-temperature ionic conductivity and excellent cyclability and capacity retention for solid-state lithium-sulfur batteries.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
(2023)
Article
Chemistry, Multidisciplinary
Runhua Gao et al.
Summary: This work proposes a binary descriptor (IBD) to guide the design of sulfur cathodes and establishes the relationship between IBD and the morphological evolution of Li anode. The design concept based on IBD achieves high energy density and homogeneous reaction distribution in lithium-sulfur batteries.
ADVANCED MATERIALS
(2023)
Article
Chemistry, Multidisciplinary
Yuxi Li et al.
Summary: Stretchable and conductive hydrogels with excellent mechanical and electrical properties are prepared by a multibond network design, showing great potential for intelligent flexible electronic devices.
Article
Engineering, Environmental
Lu Cheng et al.
Summary: A graphitized hierarchical porous carbon is prepared as a cathode host for alkali metal-Se batteries, exhibiting high electronic conductivity and ultrahigh specific area. It shows high initial capacity and stable cyclability in lithium-selenium batteries, as well as superior rate capabilities in sodium-selenium and potassium-selenium batteries.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Engineering, Environmental
Huajun Xu et al.
Summary: In this study, flexible FeVO4/Ti3C2Tx films were prepared through a simple method of vacuum assisted filtration. The Ti3C2Tx sheets acted as the host and FeVO4 nanorods were uniformly deposited onto the layers. The binder-free FVO/MX films showed superior electrochemical performance, exhibiting high reversible capacity and cycle stability, making it an ideal anode candidate for lithium-ion batteries and sodium-ion batteries.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Engineering, Environmental
Lu Cheng et al.
Summary: A water-based robust network binder doped with trace amounts of Fe3+ ions into sodium alginate was designed and applied for durable lithium/sodium-selenium batteries for the first time. The modified binder significantly increased the battery capacity and achieved ultra-high selenium loading and reversible areal capacity.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Energy & Fuels
Guangmin Zhou et al.
Summary: The authors analyze key Li-S cell parameters, propose an energy density calculation, and discuss the design targets for practical high-performance Li-S batteries.
Article
Materials Science, Multidisciplinary
Zhiyuan Han et al.
Summary: This review systematically discusses the key issues of catalytic effect in lithium-sulfur batteries, including methods of observation, understanding, designing, and utilizing catalytic effect. Advanced in-situ techniques and band theory are applied to study the catalytic process and electronic structure, promoting the application and development of lithium-sulfur batteries.
Article
Chemistry, Multidisciplinary
Hongmei Wang et al.
Summary: To achieve high energy densities in lithium-sulfur (Li-S) batteries, it is important to develop dense electrodes and reduce the electrolyte and other lightweight inactive components. In this study, a compact TiO2@VN heterostructure with high true density was proposed as a carbon-free dual-capable host for both sulfur and lithium. The heterostructure integrated adsorptive TiO2 with conductive VN to trap, migrate, and convert polysulfides effectively. The TiO2@VN-S composite exhibited high tap-density and low porosity, resulting in dual-boosted cathode-level peak volumetric/gravimetric-energy-densities and prominent areal capacity. The TiO2@VN also demonstrated lithiophilicity as a host material, allowing for uniform Li nucleation and restrained dendrite growth. This enabled the assembled full-cell to achieve high electrode-level volumetric/gravimetric-energy-density with limited lithium excess.
Article
Chemistry, Physical
Xin Qiao et al.
Summary: We proposed a convenient and universal strategy for fabricating high-sulfur-loading cathodes in lithium-sulfur batteries by designing sulfur host materials. Water-based conductive inks with improved mechanical and conductive properties were developed through rational design of conductive additives and polymer binders. This strategy not only enables the construction of high-energy-density lithium-sulfur batteries, but also shows potential for diverse lab-developed sulfur hosts.
ENERGY STORAGE MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Chuang Li et al.
Summary: Solid-state lithium-sulfur (Li-S) batteries, known for their high energy density and safety, have been hindered by slow redox kinetics and large volume change of sulfur during charge/discharge. In this study, a polymer-in-salt solid-state electrolyte is utilized to anchor sulfur in a polyacrylonitrile (PAN) substrate, leading to faster redox kinetics and smaller volume change compared to conventional Li-S batteries. The technique also introduces opportunities for designing high-performance solid-state Li-S batteries.
ENERGY & ENVIRONMENTAL SCIENCE
(2022)
Article
Materials Science, Multidisciplinary
Li Yuan Tian et al.
Summary: The use of high-entropy oxide nanofibers as a catalytic host for sulfur in lithium-sulfur batteries leads to high gravimetric capacities, excellent rate capability, and desirable cycle stability. The composite also demonstrates ideal sulfur utilization and good cycle stability under harsh operating conditions, achieving a high volumetric capacity due to its high tap density.
ENERGY & ENVIRONMENTAL MATERIALS
(2022)
Review
Chemistry, Multidisciplinary
Ya-Tao Liu et al.
Summary: This review focuses on the challenges and key factors in improving the volumetric energy density of lithium-sulfur batteries, proposes strategies for overcoming these challenges, and discusses key technologies for improving performance by enhancing the cathode materials.
ADVANCED MATERIALS
(2021)
Article
Chemistry, Applied
Wu Yue et al.
Summary: Low-molecular-weight sodium alginate (LMWSA) underwent significant molecular weight reduction and distribution changes after ozone treatment at 25 degrees Celsius for 80 minutes, while color, M/G ratio, and chemical structure remained largely unaffected. New insights into the ozone treatment of alginate were gained, highlighting its potential as an alternative method for producing LMWSA.
CARBOHYDRATE POLYMERS
(2021)
Article
Chemistry, Multidisciplinary
Lili Liu et al.
Summary: The study investigates the synergistic effects between IC, polymer networks, and substrates using solid state H-1 NMR and molecular dynamics simulation. The adhesive layer is reversible and can be detached by heating and re-adhered by cooling.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2021)
Article
Chemistry, Physical
Zhibin Cheng et al.
Summary: This study systematically modifies FM@G material on both cathode and separator to improve the performance of lithium-sulfur batteries with high sulfur loading, achieving superior cyclability and high volumetric capacity. The electrochemical performance is comparable to or even superior to the state-of-the-art carbon-based sulfur batteries.
ADVANCED ENERGY MATERIALS
(2021)
Article
Materials Science, Multidisciplinary
Ya-Tao Liu et al.
Summary: This study introduces the use of LiCoO2 nanofibers as a sulfur host to enhance the volumetric capacity of the cathode while maintaining high gravimetric capacity. By achieving a balance between compact structure and high electrochemical activity for the sulfur cathode, high volumetric and gravimetric capacities were successfully achieved. Furthermore, the efficient S/LiCoO2 cathode suppressed lithium corrosion by polysulfides, leading to a more stable lithium anode.
SCIENCE CHINA-MATERIALS
(2021)
Article
Chemistry, Physical
Yun Zhao et al.
Summary: This review paper discusses the need for new functional binders for high energy density battery systems, summarizing seven desired functions that binders should possess and reviewing leading-edge functional binders. It proposes corresponding design strategies and outlines future research opportunities and challenges related to LBRB binders.
ENERGY STORAGE MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Lu Zhang et al.
Summary: By employing polymorph engineering, the volumetric capacity of FeSe can be enhanced, leading to the development of a conductive additive-free electrode with improved performance in sodium storage.
ADVANCED MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Ruimin Sun et al.
Summary: In this study, a novel water-soluble functional binder, GN-BA, was prepared by cross-linking gelatin and boric acid, leading to improved cycling performance and capacity in lithium-sulfur batteries. The binder demonstrated excellent capability in anchoring polysulfides and stability, while also promoting electrolyte permeation and ion diffusion in sulfur electrodes.
ADVANCED FUNCTIONAL MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Hanwei Wang et al.
Summary: The study introduces a novel aqueous conductive binder made of carbon nanotubes interwoven in cellulose nanosheets, which enables the fabrication of flexible and high-strength electrodes for universal active materials. This conductive binder allows for a high mass loading of up to approximately 90 mg cm(-2), providing outstanding flexibility and mechanical integrity in electrodes.
ADVANCED FUNCTIONAL MATERIALS
(2021)
Article
Green & Sustainable Science & Technology
Niranjanmurthi Lingappan et al.
Summary: This study evaluates the pros and cons of traditional PVDF binders, investigates the correlation between PVDF and capacity loss, and explores the research progress of aqueous-based binders. Despite the widespread interest in aqueous binders across various topics, their efficiency for largely expandable silicon anodes is unsatisfactory, highlighting the need for the development of high-performance binders for future battery technology.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS
(2021)
Review
Chemistry, Physical
Rui Ma et al.
Summary: Ti3C2Tx MXene has shown great potential as a supercapacitor electrode material due to its unique physicochemical properties. The recent advances in Ti3C2Tx-based supercapacitor electrodes, including fabrication methods, electrode structures, working mechanisms, electrochemical performance, and applications, are comprehensively reviewed and discussed, along with the challenges and future prospects outlined.
JOURNAL OF MATERIALS CHEMISTRY A
(2021)
Review
Materials Science, Multidisciplinary
Yu-Ming Zhao et al.
Summary: Polymer binders play a critical role in alleviating volume expansion and maintaining the integrity and stable cycling of Si-based anodes, contributing to the practical application of high-capacity anodes in lithium-ion batteries.
Article
Chemistry, Multidisciplinary
Xiaoxiang Fan et al.
Article
Chemistry, Physical
Takeshi Kobayashi et al.
JOURNAL OF PHYSICAL CHEMISTRY C
(2020)
Review
Chemistry, Physical
Feng Zou et al.
ADVANCED ENERGY MATERIALS
(2020)
Article
Chemistry, Physical
Alex Yong Sheng Eng et al.
JOURNAL OF MATERIALS CHEMISTRY A
(2020)
Review
Electrochemistry
Fengxia Xin et al.
ELECTROCHEMICAL ENERGY REVIEWS
(2020)
Article
Multidisciplinary Sciences
Xin Chen et al.
NATURE COMMUNICATIONS
(2019)
Article
Chemistry, Physical
Tiefeng Liu et al.
ADVANCED ENERGY MATERIALS
(2019)
Article
Engineering, Chemical
Xue Gao et al.
JOURNAL OF MEMBRANE SCIENCE
(2019)
Article
Chemistry, Physical
Xufeng Wang et al.
Review
Chemistry, Physical
Hong Yuan et al.
ADVANCED ENERGY MATERIALS
(2018)
Article
Polymer Science
Qingfeng Zhou et al.
POLYMER DEGRADATION AND STABILITY
(2017)
Review
Chemistry, Multidisciplinary
Arumugam Manthiram et al.
ACCOUNTS OF CHEMICAL RESEARCH
(2013)