4.7 Article

Electrosorption of uranium (VI) by sulfonic acid-decorated FeOOH nanorods

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

Vertically Aligned Bismuthene Nanosheets on MXene for High-Performance Capacitive Deionization

Siqi Gong et al.

Summary: Capacitive deionization is a promising solution to freshwater shortage due to its efficiency, low environmental impact, and energy consumption. However, developing advanced electrode materials to enhance its performance is still challenging. This study successfully prepared hierarchical bismuthene nanosheets@MXene heterostructure, which exhibited high desalination capacity and good cycling performance. The work provides insights into the preparation of MXene-based heterostructures for capacitive deionization.

ACS NANO (2023)

Article Engineering, Environmental

The electrosorption of uranium (VI) onto the modified porous biocarbon with ammonia low-temperature plasma: Kinetics and mechanism

De Wang et al.

Summary: In this study, a rich-mesoporous biocarbon was developed using alkalithermal pyrolysis and ammonia low-temperature plasma, and its electrosorption kinetics and mechanism of U(VI) were systematically investigated. The electrosorption efficiency of U(VI) onto biocarbon significantly improved, and Faradaic side reactions were found to be non-negligible factors in the electrosorption of uranium.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Chemistry, Multidisciplinary

Unlocking Enhanced Capacitive Deionization of NaTi2(PO4)3/Carbon Materials by the Yolk-Shell Design

Xiaohong Liu et al.

Summary: In this study, a yolk-shell nanoarchitecture of NASICON-structured NTP/C materials (ys-NTP@C) was developed using a metal-organic framework@ covalent organic polymer (MOF@COP) as a sacrificial template and space-confined nanoreactor. ys-NTP@C exhibited good CDI performance with high salt adsorption capacities (SACs) and good cycling stability. This study provides a new synthetic paradigm for preparing yolk-shell structured materials and highlights the potential use of yolk-shell nanoarchitectures for electrochemical desalination.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2023)

Article Engineering, Chemical

Improved U(VI) electrosorption performance of hierarchical porous heteroatom-doped electrode based on double-template method

Qilin Liu et al.

Summary: A promising dual-template strategy was reported to prepare heteroatom-doped carbon materials with hierarchical micro-/meso-/macroporous structure from low-cost biomass pre-cursors. The resulting materials exhibited advantages of three-dimensional interconnected hierarchical porous structure and heteroatom doping, leading to high electrosorption capacity and removal efficiency.

SEPARATION AND PURIFICATION TECHNOLOGY (2023)

Article Chemistry, Physical

Ternary-metal Prussian blue analogues as high-quality sodium ion capturing electrodes for rocking-chair capacitive deionization

Xubin Tu et al.

Summary: This study reports NiCoFe ternary-metal Prussian blue analogs (PBAs) materials and explores their application as Na+ capturing electrode in rocking-chair capacitive deionization (RCDI) system. Due to the rationalized RCDI cell configuration and ternary-metal PBAs with improved stability, the NiCoFe-PBAs-based RCDI exhibits amazing desalination performance with maximum capacity of 131.4 mg.g(-1) and rate of 0.46 mg.g(-1).s(-1) as well as optimum stability with 90.7% capacity retention over 300 cycles, surpassing those of PBAs based CDI system reported previously.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

Review Engineering, Chemical

Purification of uranium-contaminated radioactive water by adsorption: A review on adsorbent materials

Byung-Moon Jun et al.

Summary: Environmental pollution, particularly from radioactive uranium contamination, is a growing research focus due to the expansion of nuclear power plants to meet global energy demand. The adsorption process is commonly used for water purification, classified into organic, inorganic, composite/nanomaterials, and framework materials, with enhanced performance through physical/chemical modifications and manufacture of organic-inorganic hybrids attributed to electrostatic interaction, surface complexation, and ion exchange mechanisms. Further research is still needed to fully understand the process of purifying contaminated radioactive water.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Engineering, Chemical

Effective inspissation of uranium(VI) from radioactive wastewater using flow electrode capacitive deionization

Jian Zhou et al.

Summary: The effectiveness of flow electrode capacitive deionization (FCDI) as a method to concentrate radioactive wastewater has been assessed for the first time in this study. The results showed that uranium (U) can accumulate into the electrolyte and on activated carbon in the flow electrode, with a removal efficiency of over 99% during each cycle. Analysis of XPS revealed the migration route and valence change of U in the flow electrode, explaining its high adsorption capacity in FCDI. Long-term experiments demonstrated that the low concentration feed water could be concentrated by 47 times, achieving a final concentration of 2843 mg L-1 U. Under optimized conditions, FCDI achieved a charge efficiency of 86% and a low energy consumption of 2.03 mg J(-1). Overall, FCDI shows promise as a method for treating radioactive wastewater, with high removal rate, excellent concentration effect, and low energy consumption.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Engineering, Environmental

Phosphate enhanced uranium stable immobilization on biochar supported nano zero valent iron

Yang Ruan et al.

Summary: The immobilization of uranium from wastewater by zero valent iron was studied in this work. A biochar supported nano zero valent iron was obtained and the uranium immobilization efficiency was enhanced to 99.9% in the presence of phosphate. The sequence of uranium, Fe/BC(900) and phosphate influenced the uranium immobilization efficiency.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Engineering, Environmental

Electrochemical removal and recovery of uranium: Effects of operation conditions, mechanisms, and implications

Yin Ye et al.

Summary: This study demonstrates the successful removal and recovery of uranium from uranium-mining wastewater using a constant-voltage electrochemical method at ambient temperature. The effects of cell voltage and ionic strength on uranium extraction efficiency and operation cost were investigated, and the method showed high extraction efficacy in real uranium-mining wastewater with varying operation costs. The study provides a feasible and efficient approach for reducing the environmental impact and mitigating the depletion of conventional uranium resources.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Engineering, Chemical

Nanofabricated chitosan/graphene oxide electrodes for enhancing electrosorptive removal of U(VI) from aqueous solution

Yanlin Liu et al.

Summary: In this study, chitosan/graphene oxide (CS/GO) nano-electrodes were fabricated for the efficient electrosorption of U(VI) from uranium-containing effluents. The CS/GO-4 electrode showed the best electrosorption performance for U(VI) due to its well-balanced meso-/micro-porous structure and superior conductivity. The isotherms and kinetics were fitted by Langmuir model. The maximum removal capacity for U(VI) reached 271.2 mg/g at 0.9 V, which was almost double compared to 0.0 V. The electrosorption-desorption cycles further demonstrated the potential application of CS/GO electrode materials for the removal of U(VI) from radioactive wastewater.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Chemistry, Physical

MOF-on-MOF nanoarchitectures for selectively functionalized nitrogen-doped carbon-graphitic carbon/carbon nanotubes heterostructure with high capacitive deionization performance

Ying Zhang et al.

Summary: In this study, a nitrogen-doped carbon heterostructure with well-designed functionalities was synthesized through the use of a MOF-on-MOF nanoarchitecture. The resulting material exhibited high salt adsorption capacity, rapid adsorption rate, and excellent cycling stability, highlighting the significance of carbon-carbon heterostructures in CDI applications and the importance of MOF-on-MOF nanoarchitectures in nanomaterials synthesis chemistry.

NANO ENERGY (2022)

Article Engineering, Chemical

Electrodeposited polypyrrole/biomass-derived carbon composite electrodes with high hybrid capacitance and hierarchical porous structure for enhancing U(VI) electrosorption from aqueous solution

Hailan Yu et al.

Summary: A biomass-derived carbon/polypyrrole (BC/PPy) electrode was fabricated and utilized for efficient separation and decontamination of U(VI) from radioactive wastewater through electrosorption. The BC/PPy-3 composite exhibited the best electrosorption performance, benefiting from improved electric conductivity, hierarchical porous structure, and the synergistic effect of hybrid capacitance. This work provides a promising strategy for the cost-effective treatment of radioactive wastewater using biomass-derived carbon/conductive polymer composite electrodes.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Engineering, Environmental

Easily synthesized mesoporous aluminum phosphate for the enhanced adsorption performance of U(VI) from aqueous solution

De Wang et al.

Summary: In this study, a high-yield selective adsorbent called APO-10 was successfully synthesized by increasing the mass of reactants. APO-10 showed enhanced adsorption performance for U(VI) under various environmental conditions and exhibited excellent stability and applicability. The study provides a feasible modification method for efficient treatment of radioactive contamination.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Chemistry, Multidisciplinary

Functionalized Iron-Nitrogen-Carbon Electrocatalyst Provides a Reversible Electron Transfer Platform for Efficient Uranium Extraction from Seawater

Hui Yang et al.

Summary: The study demonstrates an adsorption-electrocatalysis strategy using a functionalized iron-nitrogen-carbon catalyst for efficient uranium extraction from seawater, reducing uranium concentration to very low levels and providing technological innovation in this field.

ADVANCED MATERIALS (2021)

Article Engineering, Environmental

Prediction and optimization of adsorption properties for Cs+ on NiSiO@NiAlFe LDHs hollow spheres from aqueous solution: Kinetics, isotherms, and BBD model

Yu-ying Hu et al.

Summary: Novel NiSiO@NiAlFe layered double hydroxides (LDHs) hollow spheres were successfully prepared with enhanced Cs+ adsorption capacity and efficient adsorption kinetics, especially under alkaline conditions. The process was found to be exothermal, feasible, and spontaneous, showing potential for treating cesium containing wastewater.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Engineering, Chemical

Electroadsorption of uranium on amidoxime modified graphite felt

Yun Xue et al.

Summary: This paper investigates the application of amidoxime-modified graphite felt electrode in the removal of uranium by electroadsorption. The results demonstrate that the electrode has good adsorption performance and reusability, making it suitable for uranium removal in water.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Engineering, Chemical

Porous chitosan/biocarbon composite membrane as the electrode material for the electrosorption of uranium from aqueous solution

Xiaohuan Tang et al.

Summary: This study utilized chitosan and biomass-resourced porous activated carbon composite membranes as electrodes for the successful electrosorption of U (VI) from aqueous solutions. Different CS: BC mass ratios affected the electrosorption performance, with CS/BC-2 demonstrating the best results. Electrosorption involves mechanisms such as electrical double-layer formation and ion exchange, with potential applications for environmental pollution cleanup.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Chemistry, Analytical

Efficient removal of Sr2+ and Cs+ from aqueous solutions using a sulfonic acid-functionalized Zr-based metal-organic framework

Jin Wu et al.

Summary: A stable and highly efficient adsorbent, UiO-66-NH-SO3H-3, was successfully fabricated using a facile and scalable tactic, showing significant removal capacities for Sr2+ and Cs+. Due to the -SO3H functional groups, this adsorbent can selectively remove Sr2+ and Cs+ even in the presence of different coexisting ions, suggesting potential applications in water treatment.

JOURNAL OF RADIOANALYTICAL AND NUCLEAR CHEMISTRY (2021)

Article Green & Sustainable Science & Technology

Selective extraction of uranium from seawater with biofouling-resistant polymeric peptide

Yihui Yuan et al.

Summary: Nuclear power could still be a reliable and carbon-free energy source in the near term, with the oceans containing 1,000 times more uranium reserves than terrestrial resources. However, the development of uranium extraction technology from seawater faces challenges due to the low concentration of uranium and the presence of other metal ions and microorganisms.

NATURE SUSTAINABILITY (2021)

Article Chemistry, Multidisciplinary

Uranium In Situ Electrolytic Deposition with a Reusable Functional Graphene-Foam Electrode

Chao Wang et al.

Summary: An in situ electrolytic deposition method using 3D-FrGOF as the working electrode for extracting uranium from aqueous solution is reported, showing high efficiency and low energy consumption. The method successfully reduces uranium concentration in seawater to below US EPA drinking water limits, with the electrode being efficiently regenerated and recycled multiple times.

ADVANCED MATERIALS (2021)

Article Chemistry, Analytical

Investigation of the adsorption properties of U(VI) by sulfonic acid-functionalized carbon materials

Bao Yunyun et al.

Summary: The carbonization and functionalization of CS-SO3H by PZS showed good adsorption performance for uranyl ions, with results indicating that the adsorption process followed the Langmuir isotherm and pseudo-second-order model. The maximum adsorption capacity was approximately 341.98 mg/g, and the thermodynamic parameters demonstrated that the adsorption of uranium was spontaneous and endothermic.

JOURNAL OF RADIOANALYTICAL AND NUCLEAR CHEMISTRY (2021)

Article Chemistry, Inorganic & Nuclear

Effective capture of aqueous uranium using a novel magnetic goethite: Properties and mechanism

Tian-Jiao Jiang et al.

Summary: In this study, a promising material for uranium capture, M-alpha-FeOOH, was prepared and demonstrated to have a substantially better uranium adsorption performance compared to alpha-FeOOH. The adsorption data fit well with the quasi-second order kinetic model and the Langmuir isothermal adsorption model. The increased uranium removal performance of M-alpha-FeOOH was attributed to its higher specific surface area, better dispersion, and larger quantity of activated adsorption sites.

JOURNAL OF SOLID STATE CHEMISTRY (2021)

Article Chemistry, Multidisciplinary

Graphene-carbon 2D heterostructures with hierarchically-porous P,N-doped layered architecture for capacitive deionization

Jingru Guo et al.

Summary: Through the assembly of metal-organic framework nanoparticles, a hierarchically porous N,P-doped carbon-graphene 2D heterostructure (NPC/rGO) with outstanding deionization performance was fabricated, exhibiting superior performance compared to the commercial benchmark and most previously reported carbon materials in capacitive deionization applications.

CHEMICAL SCIENCE (2021)

Article Polymer Science

Sulfonated perylene-based conjugated microporous polymer as a high-performance adsorbent for photo-enhanced uranium extraction from seawater

Fengtao Yu et al.

Summary: The development of high-efficiency adsorbents for uranium extraction from seawater is hindered by poor adsorption performance and saturated adsorption. A sulfonated perylene-based conjugated microporous polymer adsorbent (PyB-SO3H) was prepared to overcome these limitations and achieve nearly 90% extraction efficiency. This research offers a unique perspective on improving uranium extraction capacity from seawater.

POLYMER CHEMISTRY (2021)

Review Engineering, Environmental

Adsorption kinetic models: Physical meanings, applications, and solving methods

Jianlong Wang et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Article Engineering, Environmental

Pseudocapacitive deionization of uranium(VI) with WO3/C electrode

Jian Zhou et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Engineering, Environmental

Ultra-thin iron phosphate nanosheets for high efficient U(VI) adsorption

De Wang et al.

JOURNAL OF HAZARDOUS MATERIALS (2019)

Article Chemistry, Physical

Rapid and efficient uranium(VI) capture by phytic acid/polyanilinei/FeOOH composites

Xintao Wei et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2018)

Article Chemistry, Physical

A novel reusable nanocomposite: FeOOH/CBC and its adsorptive property for methyl orange

Zhuanpei Wang et al.

APPLIED SURFACE SCIENCE (2015)

Article Engineering, Environmental

Electrochemical and Spectroscopic Evidence on the One-Electron Reduction of U(VI) to U(V) on Magnetite

Ke Yuan et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2015)

Article Geochemistry & Geophysics

Effect of co-solutes on the products and solubility of uranium( VI) precipitated with phosphate

Vrajesh S. Mehta et al.

CHEMICAL GEOLOGY (2014)

Article Engineering, Chemical

Sorption behaviors of uranium (VI) ions on α-FeOOH

Sabriye (Doyurum) Yusan et al.

DESALINATION (2011)

Article Chemistry, Physical

XPS determination of uranium oxidation states

Eugene S. Ilton et al.

SURFACE AND INTERFACE ANALYSIS (2011)

Article Chemistry, Inorganic & Nuclear

One-dimensional shape-controlled preparation of porous Cu2O nano-whiskers by using CTAB as a template

Y Yu et al.

JOURNAL OF SOLID STATE CHEMISTRY (2004)

Article Chemistry, Physical

Experimental and modeling study of the uranium (VI) sorption on goethite

T Missana et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2003)