☆ 4.8 Article

Magnesium Mitigation Behavior in P2-Layered Sodium-Ion Battery Cathode

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Na plus Migration Mediated Phase Transitions Induced by Electric Field in the Framework Structured Tungsten Bronze

Renhui Jiang et al.

Summary: Framework structured tungsten bronzes show potential as electrode materials in sodium-ion batteries. However, the structural instability induced by sodium ion migration poses concerns for battery performance and safety. This study presents real-time experimental evidence of phase transitions in framework structured Na0.36WO3.14, with the formation of Na+-rich (Na0.48WO3) or Na+-deficient (NaxWO3, x < 0.36) phases under different external voltages. The atomistic phase transition mechanisms associated with sodium ion migration are revealed, offering insights for the design of stable sodium-ion batteries.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Layered Superconductor Cu0.11TiSe2 as a High-Stable K-Cathode

Lichen Wu et al.

Summary: By controlled intercalation of TiSe2 with Cu, a layered superconductor Cu0.11TiSe2 is obtained, showing improved electron and ion transfer rates and crystal structure stability, greatly enhancing the performance of potassium-ion batteries.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Basal Planes Unlocking and Interlayer Engineering Endows Proton Doped-MoO2.8F0.2 with Fast and Stable Magnesium Storage

Weixiao Wang et al.

Summary: This research introduces F- substitution and H+ interstitial doping to improve the performance of molybdenum trioxide as a cathode material for rechargeable magnesium batteries. F- substitutional doping unlocks the inactive basal plane and accelerates ion diffusion, while H+ interstitial doping expands interlayer spacing and stabilizes the structure. Dual doping creates shallow impurity levels, facilitating electron transport. The HMoOF electrode exhibits excellent reversible capacity, rate capability, and cycling stability in RMBs.

ACS NANO (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Whole-Voltage-Range Oxygen Redox in P2-Layered Cathode Materials for Sodium-Ion Batteries

Xun-Lu Li et al.

Summary: The study demonstrates reversible oxygen-redox in a wide voltage range of 1.5-4.5 V in layered metal-oxide cathodes, attributing the stability to Mg-ions as pillars in the Na layer and the triggering of oxygen-redox to intrinsic vacancies in the TM layer. Charge compensation from Mn- and O-ions contributes to the whole voltage range, while Fe-ions only contribute to the high-voltage region. The reversible oxygen-redox is achieved by orphaned electrons in O's nonbonding 2p orbitals pointing toward TM-vacancy sites, while Mg-ions in Na sites effectively suppress oxygen release.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Clarifying the Roles of Cobalt and Nickel in the Structural Evolution of Layered Cathodes for Sodium-Ion Batteries

Duojie Wu et al.

Summary: Layered sodium manganese-based oxides are promising cathode materials for high capacity and cost-effectiveness, but performance degradation due to unwanted structural evolution remains a major challenge. Cobalt substitution is shown to alleviate lattice stress and maintain the layered structure, while nickel substitution results in various defects and irreversible phase transitions. The critical evidence of cation mixing leading to capacity loss highlights the complexity of interplay between different transition metals in the oxides.

NANO LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Assessing Atomic-Phase Transitions and Ion Transport in Layered NaxNiO2 (x ≤ 0.67) Cathode Materials

Hui Wan et al.

Summary: Ni-based layered transition-metal oxides are advanced cathode materials used in rechargeable Na-ion batteries, but their applications are hindered by irreversible phase transitions and rapid capacity decay in high-voltage cycles. This study explores the structural phase transitions in NaxNiO2 cathode materials and their effects on performance degradation, providing insights for the development of high-performance cathodes for Na-ion batteries.

JOURNAL OF PHYSICAL CHEMISTRY C (2021)

Add to Collection

Article Physics, Multidisciplinary

A strategy to improve the electrochemical performance of Ni-rich positive electrodes: Na/F-co-doped LiNi0.6Mn0.2Co0.2O2 *

Hui Wan et al.

Summary: Sodium, fluorine, and sodium/fluorine co-doping can improve the structural stability and electrochemical performance of Ni-rich layered lithium transition metal oxides, leading to higher open circuit voltage and discharge capacity, and reducing irreversible phase transitions.

CHINESE PHYSICS B (2021)

Add to Collection

Article Chemistry, Physical

Atomistic Observation of Desodiation-Induced Phase Transition in Sodium Tungsten Bronze

Qi Meng et al.

Summary: The study investigates the phase instability induced by the extraction of Na ions in layered-structure Na0.5WO3.25, revealing the dynamic evolution of phase boundaries and crystal orientations, thus providing insights for the design of high-performance Na-ion batteries.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2021)

Add to Collection

Article Multidisciplinary Sciences

Tuning local chemistry of P2 layered-oxide cathode for high energy and long cycles of sodium-ion battery

Chenchen Wang et al.

Summary: In this study, a layered P2-Na0.612K0.056MnO2 with large-sized K+ riveted in the Na-layers enables 0.9 Na+ (de)insertion with a reversible phase transition of P2-P'2. This cathode material demonstrates the highest specific capacity and energy density based on the redox of Mn3+/Mn4+, with high capacity retention after 100 cycles. This research provides insights into tunable chemical environments of transition-metal oxides for advanced cathode materials and promotes the development of sodium-ion batteries. High capacity and structural stable cathode materials remain challenges for sodium-ion batteries.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Transition-Metal Vacancy Manufacturing and Sodium-Site Doping Enable a High-Performance Layered Oxide Cathode through Cationic and Anionic Redox Chemistry

Qiuyu Shen et al.

Summary: A novel P2-Na0.76Ca0.05[Ni0.230.08Mn0.69]O-2 cathode material with joint cationic and anionic redox activities has been developed, showing enhanced energy density and cycling stability. This research provides new opportunities for designing high-energy-density and high-stability layered sodium oxide cathodes through tuning local chemical environments.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Oxygen-Storage Materials to Stabilize the Oxygen Redox Activity of Three-Layered Sodium Transition Metal Oxides

Mariya L. Kalapsazova et al.

Summary: To enhance the energy density of lithium and sodium ion batteries, both cationic and anionic redox reactions at intercalation-type electrodes need to be activated simultaneously. Oxygen redox activity can lead to poor stability due to increased surface reactivity of the oxides. Using oxygen-storage materials as buffers can help stabilize the oxygen redox activity and increase reversible capacity.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2021)

Add to Collection

Article Multidisciplinary Sciences

Engineering Na+-layer spacings to stabilize Mn-based layered cathodes for sodium-ion batteries

Wenhua Zuo et al.

Summary: The authors utilized a water-mediated strategy to enhance the electrochemical performance of manganese-based layered cathodes in sodium-ion batteries, achieving outstanding cycling stability and rate capability. Engineering alkali-metal layer spacings was shown to be an effective strategy for stabilizing the structure of layered transition metal oxides.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Hierarchical Engineering of Porous P2-Na2/3Ni1/3Mn2/3O2 Nanofibers Assembled by Nanoparticles Enables Superior Sodium-Ion Storage Cathodes

Yongchang Liu et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Vitalization of P2-Na2/3Ni1/3Mn2/3O2 at high-voltage cyclability via combined structural modulation for sodium-ion batteries

Yangyang Huang et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Oxygen redox activity with small voltage hysteresis in Na0.67Cu0.28Mn0.72O2 for sodium-ion batteries

Wei Zheng et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Unraveling Atomically Irreversible Cation Migration in Sodium Layered Oxide Cathodes

Cheng Chen et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2020)

Add to Collection

Article Multidisciplinary Sciences

Rational design of layered oxide materials for sodium-ion batteries

Chenglong Zhao et al.

SCIENCE (2020)

Add to Collection

Article Engineering, Environmental

Improved cycle and air stability of P3-Na0.65Mn0.75Ni0.25O2 electrode for sodium-ion batteries coated with metal phosphates

Yu Wang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Dopant Segregation Boosting High-Voltage Cyclability of Layered Cathode for Sodium Ion Batteries

Kuan Wang et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Understanding the synergic roles of MgO coating on the cycling and rate performance of Na0.67Mn0.5Fe0.5O2 cathode

Weijin Kong et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Synthesis and characterization of Ru doped NaNi0.5Mn0.3Ti0.2O2 cathode material with improved electrochemical performance for sodium-ion batteries

Mingzhe Leng et al.

IONICS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Tuning P2-Structured Cathode Material by Na-Site Mg Substitution for Na-Ion Batteries

Qin-Chao Wang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Article Chemistry, Physical

A P2/P3 composite layered cathode for high-performance Na-ion full batteries

Ya-Nan Zhou et al.

NANO ENERGY (2019)

Add to Collection

Article Electrochemistry

Electrochemical properties and first-principle analysisof Na (x) [M (y) Mn1-y ]O-2 (M = Fe, Ni) cathode

Debasis Nayak et al.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

High voltage structural evolution and enhanced Na-ion diffusion in P2-Na2/3Ni1/3-xMgxMn2/3O2 ( 0 r x r 0.2) cathodes from diffraction, electrochemical and ab initio studies

Nuria Tapia-Ruiz et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Advanced P2-Na2/3Ni1/3Mn7/12Fe1/12O2 Cathode Material with Suppressed P2-O2 Phase Transition toward High-Performance Sodium-Ion Battery

Qiong Yang et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Physical

Anionic Redox Activity in a Newly Zn-Doped Sodium Layered Oxide P2-Na2/3Mn1-yZnyO2 (0 < y < 0.23)

Xue Bai et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Exploring Oxygen Activity in the High Energy P2-Type Na0.78Ni0.23Mn0.69O2 Cathode Material for Na-Ion Batteries

Chuze Ma et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Add to Collection

Article Chemistry, Physical

A first-principles study of the preventive effects of Al and Mg doping on the degradation in LiNi0.8Co0.1Mn0.1O2 cathode materials

Kyoungmin Min et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2017)

Add to Collection

Article Chemistry, Physical

Copper-substituted Na0.67Ni0.3-xCuxMn0.7O2 cathode materials for sodium-ion batteries with suppressed P2-O2 phase transition

Lei Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Chemistry, Physical

Structural Evolution and Redox Processes Involved in the Electrochemical Cycling of P2-Na0.67[Mn0.66Fe0.20Cu0.14]O2

Elahe Talaie et al.

CHEMISTRY OF MATERIALS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Improvement of the Cathode Electrolyte Interphase on P2-Na2/3Ni1/3Mn2/3O2 by Atomic Layer Deposition

Judith Alvarado et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Insights into the Effects of Zinc Doping on Structural Phase Transition of P2-Type Sodium Nickel Manganese Oxide Cathodes for High-Energy Sodium Ion Batteries

Xuehang Wu et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Suppressing the P2-O2 Phase Transition of Na0.67Mn0.67Ni0.33O2 by Magnesium Substitution for Improved Sodium-Ion Batteries

Peng-Fei Wang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Add to Collection

Article Chemistry, Physical

Improved electrochemical performance of Na0.67MnO2 through Ni and Mg substitution

K. Hemalatha et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection

Article Chemistry, Physical

An advanced cathode for Na-ion batteries with high rate and excellent structural stability

Dae Hoe Lee et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)

Add to Collection

Article Chemistry, Physical

Calculations of Li-Ion Diffusion in Olivine Phosphates

Gopi Krishna Phani Dathar et al.

CHEMISTRY OF MATERIALS (2011)

Add to Collection

Article Chemistry, Physical

Ionic and electronic transport in single crystalline LiFePO4 grown by optical floating zone technique

R. Amin et al.

SOLID STATE IONICS (2008)

Add to Collection

Article Electrochemistry

In situ X-ray diffraction study of P2-Na2/3[Ni1/3Mn2/3]O2

ZH Lu et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2001)

Add to Collection

Article Chemistry, Physical

Intercalation of water in P2, T2 and O2 structure Az[COxNi1/3-xMn2/3]O2

ZH Lu et al.

CHEMISTRY OF MATERIALS (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.