☆ 4.5 Article

Macro-electrolyte jet machining of TC4 titanium alloy using a rear-end tilt tool

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2024)

Related references

Note: Only part of the references are listed.

Article Engineering, Aerospace

Electrochemical cutting of mortise-tenon joint structure by rotary tube electrode with helically distributed jet-flow holes

Tao Yang et al.

Summary: A low-cost, high-efficiency, and high-quality nickel-based mortise-tenon joint structure is urgently needed in the field of aviation engineering. This study proposes a method using a tube electrode with helically distributed jet-flow holes for electrochemical cutting of the joint structure, and successfully verifies the machining results through experiments and parameter optimization.

CHINESE JOURNAL OF AERONAUTICS (2022)

Add to Collection

Review Engineering, Civil

Tribological and surface morphological characteristics of titanium alloys: a review

Munish Kumar Gupta et al.

Summary: Grade titanium and its alloys are important choices for the automotive, biomedical, and aerospace industries due to their easy fabrication, weldability, biocompatibility, high strength-to-weight ratio, high temperature resistance, and low modulus of elasticity. However, the tribological and surface morphological characteristics of Ti-6Al-4V alloy are limited. Various attempts and studies have been conducted to enhance these properties.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2022)

Add to Collection

Article Engineering, Manufacturing

On-machine measurement with an electrochemical jet machine tool

Ivan Bisterov et al.

Summary: Measurement of surface geometry is essential in engineering, and this paper proposes a new in-situ measurement method using an electrolyte jet as a scanning probe in a precision electrochemical jet machine tool. The method allows for adjustable sensitivity and vertical resolution, achieving an accuracy of 4.4%.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2022)

Add to Collection

Article Engineering, Manufacturing

Electrochemical jet manufacturing technology: From fundamentals to application

Alistair Speidel et al.

Summary: Electrochemical jet processing is a site-specific manufacturing method that uses localized electrolyte jets to modify workpieces. It can selectively remove or deposit materials and has the potential to serve as an analysis tool. Unifying various site-specific manufacturing methods on one platform enables customization of surface geometries, finishes, and compositions.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2022)

Add to Collection

Article Engineering, Multidisciplinary

Enhancement of surface quality in the electrochemical milling of 316L using a novel cathode structure

Junzhong Zhang et al.

Summary: Enhancing the current density at the trail edge of a workpiece through a tool with insulated frontal nozzle tip can improve the surface quality during machining process. Experimental results demonstrated that a mirror-like surface could be achieved under favorable conditions.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2022)

Add to Collection

Article Engineering, Mechanical

Tool wear patterns and their promoting mechanisms in hybrid cooling assisted machining of titanium Ti-3Al-2.5V/grade 9 alloy

Munish Kumar Gupta et al.

Summary: Hybrid lubri-cooling is an effective technique that provides synergistic cooling and lubrication effect in the cutting of titanium alloys, reducing tool wear and chemical elements adhesion. The combination of LN2 and MQL resulted in the least tool wear and severe wear on the cutting edge.

TRIBOLOGY INTERNATIONAL (2022)

Add to Collection

Article Engineering, Mechanical

Experimental characterisation of the performance of hybrid cryo-lubrication assisted turning of Ti-6Al-4V alloy

Munish Kumar Gupta et al.

Summary: The research on turning Ti-6Al-4V using N2+MQL cooling technique showed promising results in reducing coolant consumption, achieving smooth surface quality, minimizing tool wear and cutting energy, making it a valuable method for industrial application.

TRIBOLOGY INTERNATIONAL (2021)

Add to Collection

Article Engineering, Industrial

Three-dimensional simulation and experimental investigation of electrolyte jet machining with the inclined nozzle

Weidong Liu et al.

Summary: This study developed a three-dimensional multiphysics model of the stationary EJM process accounting for two-phase flow field and electric field and conducted experiments for validation. The inclined nozzle resulted in uneven distribution of flow velocity and thickness of electrolyte film, causing non-circular hydraulic jump and non-axisymmetric anodic current density distribution.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

Add to Collection

Article Engineering, Manufacturing

Surface integrity in metal machining - Part I: Fundamentals of surface characteristics and formation mechanisms

Zhirong Liao et al.

Summary: The surface integrity of machined metal components is crucial for their functionality, longevity, and overall performance. Surface defects induced by machining operations vary in scale and cause microstructural, mechanical, and chemical effects, requiring advanced evaluation and post-processing techniques. The paper explores the state-of-the-art of surface integrity research, focusing on governing mechanisms and emerging evaluation approaches, and analyzes the multi-scale phenomena associated with metal machining.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Post processing of additively manufactured parts using electrochemical jet machining

Alistair Speidel et al.

Summary: Electrochemical jet machining is introduced as a single-step process to improve the surface quality of additively manufactured parts, reduce roughness, and enhance functionality. The technique has shown promising results in reducing the roughness of Ti-6Al-4V parts and adding micro-patterns, demonstrating its potential in additive manufacturing applications.

MATERIALS LETTERS (2021)

Add to Collection

Article Engineering, Manufacturing

Improving material removal rate in macro electrolyte jet machining of TC4 titanium alloy through back-migrating jet channel

Minglu Wang et al.

Summary: This study proposed a new tool structure with back-migrating jet channels, which significantly improved machining efficiency and material removal rate in macro-electrolyte jet machining. Through numerical simulations and experiments, it was found that this tool design increased the electricity quantity at each point on the workpiece surface, leading to improved MRR, machining localization, and groove edge quality.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection

Article Engineering, Mechanical

Tribological performance based machinability investigations in cryogenic cooling assisted turning of α-β titanium Alloy

Munish Kumar Gupta et al.

Summary: This research studied the quality indicators of machining alpha-beta titanium alloy under different cooling environments and found that liquid nitrogen cooling was more effective compared to dry and CO2 machining. Cryogenic cooling assisted machining has been confirmed as a sustainable strategy for environmental consciousness.

TRIBOLOGY INTERNATIONAL (2021)

Add to Collection

Review Engineering, Manufacturing

Fabrication of surface microstructures by mask electrolyte jet machining

Ming Wu et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2020)

Add to Collection

Article Engineering, Industrial

Jet electrochemical machining of multi-grooves by using tube electrodes in a row

Jinxing Luo et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)

Add to Collection

Article Engineering, Industrial

Electrolyte jet machining of Ti1023 titanium alloy using NaCl ethylene glycol-based electrolyte

Weidong Liu et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)

Add to Collection

Article Engineering, Industrial

Oscillatory behaviour in the electrochemical jet processing of titanium

Alistair Speidel et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)

Add to Collection

Article Engineering, Multidisciplinary

Investigation on electrolyte jet machining of three-dimensional freeform surfaces

Yonghua Zhao et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2019)

Add to Collection

Article Engineering, Multidisciplinary

Fabrication of microscale concave and grooves through mixed-gas electrochemical jet machining

Jung-Chou Hung et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2019)

Add to Collection

Article Engineering, Industrial

Precision enhanced electrochemical jet processing

Adam T. Clare et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2018)

Add to Collection

Article Engineering, Industrial

Advancing electrochemical jet methods through manipulation of the angle of address

J. Mitchell-Smith et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

Add to Collection

Proceedings Paper Engineering, Industrial

Modeling and simulation of the material removal process in electrolyte jet machining of mass transfer in convection and electric migration

Wu Ming et al.

19TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (2018)

Add to Collection

Article Engineering, Manufacturing

Energy distribution modulation by mechanical design for electrochemical jet processing techniques

Jonathon Mitchell-Smith et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)

Add to Collection

Article Engineering, Manufacturing

Experimental investigation into electrochemical milling of Ti6Al4V

K. Mishra et al.

JOURNAL OF MANUFACTURING PROCESSES (2017)

Add to Collection

Article Engineering, Industrial

Mirror-like finishing by electrolyte jet machining

Takuma Kawanaka et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2015)

Add to Collection

Proceedings Paper Chemistry, Physical

Investigation on the performance of macro electrochemical milling

W. Vanderauwera et al.

PROCEEDINGS OF THE SEVENTEENTH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM) (2013)

Add to Collection

© Peeref 2019-2024. All rights reserved.