☆ 4.3 Article

Effect of bearing shell deformation and ER fluid behavior on two-lobed slot-entry hybrid journal bearing

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Mechanical

Performance Analysis of Textured Spherical Hybrid Journal Bearings Operated With Magnetorheological Fluid

Adesh Kumar Tomar et al.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2023)

Add to Collection

Article Engineering, Mechanical

Analysis of MR fluid lubricated slot entry hybrid conical journal bearing with texturing arrangements

Krishnkant Sahu et al.

Summary: This paper proposes a study on the slot-entry 'hybrid conical journal bearing system' (HCJBs) with the slot restrictor as a compensating device. The effects of different zonal arrangements of textured surfaces and smart behavior of magnetorheological fluid (MRF) on the HCJBs are analyzed. Mathematical modeling of the modified Reynolds equation is done using the Finite element method and the Gauss-Seidel method. Numerical simulation shows that the application of textured surfaces and MR fluid improves the performance of the hybrid conical bearing system in terms of fluid film thickness, stiffness, and stability.

TRIBOLOGY INTERNATIONAL (2023)

Add to Collection

Article Engineering, Mechanical

Influence of surface textures on the dynamic stability and performance parameters of hydrodynamic two-lobe journal bearings

Niranjan Singh et al.

Summary: The study found that specific surface textures within a certain angle range in the two-lobe journal bearing system can significantly improve its performance parameters, with the best results achieved at a dimple aspect ratio of 1.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2022)

Add to Collection

Article Engineering, Mechanical

Study of the impact of aeration on the lubricant behavior in a tapered roller bearing: Innovative numerical modelling and validation via particle image velocimetry

Lorenzo Maccioni et al.

Summary: The interaction between air and lubricant affects the lubrication mechanisms in rolling-element bearings due to aeration. This paper introduces a new Computational Fluid Dynamics (CFD) model in the OpenFOAM environment specifically designed to consider aeration. Comparisons between numerical predictions and experimental data from a Particle Image Velocimetry (PIV) test rig show that the solver taking aeration into account provides more accurate results, especially at high shaft rotational speeds.

TRIBOLOGY INTERNATIONAL (2022)

Add to Collection

Article Engineering, Mechanical

Misalignment and Surface Irregularities Effect in MR Fluid Journal Bearing

Krishnkant Sahu et al.

Summary: Misalignment affects the operation of the journal bearing system, and smart lubricants can enhance the performance of fluid film bearings. The study finds that journal misalignment reduces the fluid film thickness, increases the fluid film damping coefficient, and frictional torque.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Add to Collection

Article Engineering, Mechanical

Dynamic stability analysis of noncircular two-lobe journal bearings with couple stress lubricant regime

Mahdi Zare Mehrjardi

Summary: This research investigates the steady state and dynamic characteristics of two-lobe noncircular journal bearings with couple stress lubricant, showing that the efficiency of the bearings can be improved by using couple stress fluid. The study also analyzes the stability performance and rotor motion equations, demonstrating that an increase in the lubricant couple stress parameter enhances the bearings' ability to damp rotor perturbations. Additionally, changing lubricant properties has a more pronounced effect on bearing performance at higher values of the couple stress parameter, especially with an increase in noncircularity of bearings' geometry.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2021)

Add to Collection

Article Engineering, Mechanical

Elasto-hydrodynamic analysis of journal bearing operating with nanolubricants

Pravez Khan et al.

Summary: The study investigated and compared the performance parameters of rigid and flexible journal bearings using non-Newtonian nanolubricants. Results showed that using nanolubricants significantly increased load-carrying capacity, maximum pressure, and friction force, with these parameters increasing with the power law index. The study also found that elastic deformation had a minimal effect on performance parameters.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2021)

Add to Collection

Article Engineering, Mechanical

Dynamic stability of micropolar lubricated hydrodynamic offset-halves journal bearings

Sanyam Sharma et al.

Summary: This study analyzed the stability of non-circular offset bearings using the finite element method, with selected input parameters such as eccentricity factor and aspect ratio. Output parameters including load, critical mass, whirl frequency ratio, and threshold speed were computed and plotted, showing that micropolar lubricated circular offset bearings exhibit high stability at higher eccentricity factors and aspect ratios.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2021)

Add to Collection

Article Engineering, Mechanical

On the behavior of a ferrofluid-lubricated herringbone-grooved hybrid slot-entry bearing

Satish C. Sharma et al.

Summary: The study showed that the use of a ferrofluid lubricant can provide optimized lubricant film parameters, including lubricant film thickness and fluid film stiffness/damping coefficient, as well as a better stability threshold speed.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2021)

Add to Collection

Article Engineering, Mechanical

Elastic Deformation Effects on Self-Lubricating Journal Bearings Using Pseudo-Plastic Lubricants

Maamar Malki et al.

Summary: This study analyzed the effect of elastic deformations on the static characteristics of finite self-lubricating journal bearings. Results showed that the pseudo-plastic lubricant decreases the characteristics of the porous journal bearings, especially when considering the elasticity and permeability of the bush.

TRIBOLOGY ONLINE (2021)

Add to Collection

Article Engineering, Mechanical

Linear and nonlinear analysis of mount angle effects on the dynamic stability of micropolar lubricated hydrodynamic lobed journal bearings

M. Zare Mehrjardi et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2020)

Add to Collection

Article Engineering, Mechanical

Geometrical analysis of elliptical journal bearings and its effects on friction and load capacity

Ali Ebrahimi et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2020)

Add to Collection

Article Engineering, Mechanical

The effect of three-lobed bearing shapes in floating-ring bearings on the nonlinear oscillations of high-speed rotors

Congcong Zhang et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Rheological texture in a journal bearing with magnetorheological fluids

Stefan G. E. Lampaert et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2020)

Add to Collection

Article Engineering, Mechanical

A Study of Hole-Entry Grooved Surface Hybrid Spherical Journal Bearing Operating With Electrorheological Lubricant

Adesh Kumar Tomar et al.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Computational Fluid Dynamics Applied to Lubricated Mechanical Components: Review of the Approaches to Simulate Gears, Bearings, and Pumps

Lorenzo Maccioni et al.

APPLIED SCIENCES-BASEL (2020)

Add to Collection

Article Engineering, Mechanical

Innovative Meshing Strategies for Bearing Lubrication Simulations

Franco Concli et al.

LUBRICANTS (2020)

Add to Collection

Article Engineering, Mechanical

A Thermoelastohydrodynamic Analysis for the Static Performance of High-Speed-Heavy Load Tilting-Pad Journal Bearing Operating in the Turbulent Flow Regime and Comparisons to Test Data

Hirotoshi Arihara et al.

JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2019)

Add to Collection

Article Engineering, Mechanical

Boundary slippage modeling and optimization of hydrophobic tilting pad thrust bearing with elastic deformation

B. Zhu et al.

TRIBOLOGY INTERNATIONAL (2019)

Add to Collection

Article Engineering, Mechanical

Three-Dimensional Thermo-Elasto-Hydrodynamic Computational Fluid Dynamics Model of a Tilting Pad Journal Bearing-Part I: Static Response

Jongin Yang et al.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2019)

Add to Collection

Article Engineering, Mechanical

A Simulation Study on the Behavior of Magnetorheological Fluid on Herringbone-Grooved Hybrid Slot-Entry Bearing

Krishnkant Sahu et al.

TRIBOLOGY TRANSACTIONS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Magneto-rheological fluid slot-entry journal bearing considering thermal effects

Krishnkant Sahu et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Electro-rheological fluid lubricated textured multi-lobe hole-entry hybrid journal bearing system

Satish C. Sharma et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2018)

Add to Collection

Article Engineering, Mechanical

Analysis of textured multi-lobe non-recessed hybrid journal bearings with various restrictors

Chandra B. Khatri et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Add to Collection

Article Engineering, Mechanical

Combined effects of turbulence and elastic deformation on the performance of a journal bearing lubricated with a couple stress fluid

Boualem Chetti

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2018)

Add to Collection

Article Engineering, Mechanical

Modelling and analysis of elastic and thermal deformations of a hybrid journal bearing

Aki Linjamaa et al.

TRIBOLOGY INTERNATIONAL (2018)

Add to Collection

Article Engineering, Mechanical

Numerical simulations of oil flow inside a gearbox by Smoothed Particle Hydrodynamics (SPH) method

Zhe Ji et al.

TRIBOLOGY INTERNATIONAL (2018)

Add to Collection

Article Engineering, Mechanical

Influence of couple stress lubricant on the performance of textured two-lobe slot-entry hybrid journal bearing system

Chandra B. Khatri et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2017)

Add to Collection

Article Engineering, Mechanical

The load carrying capacity of textured sliding bearings with elastic deformation

Binbin Su et al.

TRIBOLOGY INTERNATIONAL (2017)

Add to Collection

Article Engineering, Mechanical

A comparative study of the preload effects on the stability performance of noncircular journal bearings using linear and nonlinear dynamic approaches

M. Zare Mehrjardi et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2016)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Smoothed particle hydrodynamics method for fluid flows, towards industrial applications: Motivations, current state, and challenges

M. S. Shadloo et al.

COMPUTERS & FLUIDS (2016)

Add to Collection

Article Engineering, Chemical

Pressure distribution in small hydrodynamic journal bearings considering cavitation: a numerical approach based on the open-source CFD code OpenFOAM®

Franco Concli

LUBRICATION SCIENCE (2016)

Add to Collection

Article Engineering, Mechanical

Two lobe non-recessed roughened hybrid journal bearing - A comparative study

Satish C. Sharma et al.

TRIBOLOGY INTERNATIONAL (2015)

Add to Collection

Article Engineering, Mechanical

Influence of wear on the performance of 2-lobe slot entry hybrid journal bearings

Prashant B. Kushare et al.

MECHANICS & INDUSTRY (2015)

Add to Collection

Article Engineering, Mechanical

Numerical modeling of journal bearing considering both elastohydrodynamic lubrication and multi-flexible-body dynamics

J. Choi et al.

INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY (2012)

Add to Collection

Article Engineering, Mechanical

Improvement of journal bearing operation at heavy misalignment using bearing flexibility and compliant liners

Kim Thomsen et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2012)

Add to Collection

Article Engineering, Mechanical

Performance analysis of a 2-lobe worn multirecess hybrid journal bearing system using different flow control devices

Vikas M. Phalle et al.

TRIBOLOGY INTERNATIONAL (2012)

Add to Collection

Article Engineering, Mechanical

Elastohydrodynamic Lubrication Analysis of a Compliant Journal Bearing Considering Static and Dynamic Deformations of the Bearing Liner

Mustapha Lahmar et al.

TRIBOLOGY TRANSACTIONS (2010)

Add to Collection

Article Engineering, Mechanical

Static and dynamic analysis of elastohydrodynamic elliptical journal bearing with micropolar lubricant

K. Prabhakaran Nair et al.

TRIBOLOGY INTERNATIONAL (2007)

Add to Collection

Article Engineering, Mechanical

Effects of electric field on hydrodynamic characteristics of finite-length ER journal bearings

J Peng et al.

TRIBOLOGY INTERNATIONAL (2006)

Add to Collection

Article Materials Science, Multidisciplinary

Hydrodynamic characteristics of ER journal bearings with external electric field imposed on the contractive part

J Peng et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2005)

Add to Collection

Article Engineering, Mechanical

Nonlinear dynamic analysis of a hydrodynamic journal bearing considering the effect of a rotating or stationary herringbone groove

GH Jang et al.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.