☆ 4.8 Article

Study of Na Deposition Formation in Mixed Ethylene: Propylene Carbonate Electrolytes by Inert/Cryoelectron Microscopy

ACS APPLIED MATERIALS & INTERFACES (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Self-supported hard carbon anode from fungus-treated basswood towards sodium-ion batteries

Ping Wang et al.

Summary: A self-supported hard carbon electrode from fungus-pretreated basswood shows improved rate capability and cycling stability. The electrode demonstrates higher capacity retention and initial Coulombic efficiency compared to conventional hard carbon derived from basswood. The study also provides insights into the storage mechanism of hard carbon.

NANO RESEARCH (2023)

Add to Collection

Article Chemistry, Multidisciplinary

A Sodium-Antimony-Telluride Intermetallic Allows Sodium-Metal Cycling at 100% Depth of Discharge and as an Anode-Free Metal Battery

Yixian Wang et al.

Summary: A new intermetallic compound NST-Na, fabricated through repeated cold rolling and folding, demonstrates outstanding electrochemical performance and stability. The thermodynamically stable face-centered-cubic structure of NST-Na allows for high efficiency in commonly used electrolytes, contributing to improved energy storage efficiency in sodium-metal batteries.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Stabilizing Sodium Metal Anodes with Surfactant-Based Electrolytes and Unraveling the Atomic Structure of Interfaces by Cryo-TEM

Jianmin Luo et al.

Summary: Sodium metal batteries show promise as next-generation energy storage systems due to the high specific capacity of the Na metal anode. This study introduces CTAB as an electrolyte additive to stabilize the Na metal anode, with cryogenic transmission electron microscopy revealing critical structures at the nano/atomic scale. Ultimately, stable Na anodes were achieved at ultrahigh capacity conditions.

NANO LETTERS (2022)

Add to Collection

Review Chemistry, Physical

Investigating lithium metal anodes with nonaqueous electrolytes for safe and high-performance batteries

Hui Zhang et al.

Summary: This review discusses the issues of lithium dendrites and unstable solid electrolyte interphases (SEIs) for lithium anodes with nonaqueous electrolytes, and summarizes various strategies to address these problems.

SUSTAINABLE ENERGY & FUELS (2022)

Add to Collection

Article Chemistry, Physical

NaF-rich solid electrolyte interphase for dendrite-free sodium metal batteries

Mengyang Xu et al.

Summary: A strategy of in situ forming a protective layer to suppress dendrite growth on sodium metal has been developed, leading to enhanced cyclic stability of sodium metal batteries. The design of a NaF-rich solid electrolyte interface prevents continuous electrolyte depletion during charge/discharge cycles and contributes to the high performance of the batteries.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Research Progress and Perspective on Lithium/Sodium Metal Anodes for Next-Generation Rechargeable Batteries

Apurva Patrike et al.

Summary: With the development of consumer electronic devices and electric vehicles, lithium-ion batteries are crucial for high energy storage. However, they still cannot meet the demands of rapidly growing industries. Metal batteries, with higher energy density, are considered as the next-generation devices. Challenges such as uncontrolled dendrite growth and high reactivity hinder the commercialization of metal batteries. This review discusses the failure mechanism of lithium/sodium metal anodes and explores potential solutions through electrolyte optimization, solid-electrolyte interphase layer formation, and nanoengineering at the material level.

CHEMSUSCHEM (2022)

Add to Collection

Article Chemistry, Physical

Ion-conductive gradient sodiophilic 3D scaffold induced homogeneous sodium deposition for highly stable sodium metal batteries

Yanping Zhuang et al.

Summary: The gradient SnO2-modified 3D carbon nanofibers (SnO2-CNFs) scaffold effectively addresses the issue of sodium dendrites in sodium batteries, improving cycling performance and space utilization.

NANO ENERGY (2022)

Add to Collection

Article Engineering, Environmental

Sodiophilic Zn/SnO2 porous scaffold to stabilize sodium deposition for sodium metal batteries

Qiulin Chen et al.

Summary: The study introduces a new type of sodium metal anode material to address its issues, demonstrating excellent electrochemical performance and cycling stability. By surface coating a porous sodiophilic zinc metal framework with SnO2 layer, stable solid electrolyte interface layer and volume change regulation are achieved, providing new insights and methods for further research.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Design Principles of Sodium/Potassium Protection Layer for High-Power High-Energy Sodium/Potassium-Metal Batteries in Carbonate Electrolytes: a Case Study of Na2Te/K2Te

Hai Yang et al.

Summary: The study demonstrates that Na2Te/K2Te can improve Na+/K+ transport and suppress dendrite formation, offering a promising way to stabilize sodium (potassium)-metal anodes.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Zn Electrodeposition by an In Situ Electrochemical Liquid Phase Transmission Electron Microscope

Ming Li et al.

Summary: This study explores the importance of zinc batteries for battery technology advancement and the effects of applied current and electrolyte flow rate on the early stage of Zn dendrite formation. The research reveals a square root relationship between time and Zn dendrite lateral growth, with higher applied current resulting in longer incubation time.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2021)

Add to Collection

Review Materials Science, Composites

Advanced in-situ characterizations of nanocomposite electrodes for sodium-ion batteries-A short review

Dongmei Lin et al.

Summary: Sodium-ion batteries are gaining attention as promising alternatives to lithium-ion batteries due to low cost and natural abundance of sodium reserves. Nanocomposites show high structure stability and superb conductivity for SIB electrodes, but still face issues like side reactions and low energy density. In-situ techniques, including TEM, XRD, XAS, and Raman spectroscopy, are emerging for better understanding the structural and kinetic processes in nanocomposite electrodes during charging/discharging.

COMPOSITES COMMUNICATIONS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Visualizing the Sensitive Lithium with Atomic Precision: Cryogenic Electron Microscopy for Batteries

Yujing Liu et al.

Summary: Cryo-EM technology plays a significant role in revealing the structure of electron beam-sensitive lithium in battery materials, enabling high-resolution imaging at the atomic scale. Cryo-EM allows for better monitoring of lithium lattice ordering, nanostructures of the solid electrolyte interface, and aids in the design of high-performance lithium metal batteries.

ACCOUNTS OF CHEMICAL RESEARCH (2021)

Add to Collection

Article Multidisciplinary Sciences

Probing atomic structure of beam-sensitive energy materials in their native states using cryogenic transmission electron microscopes

Yuanmin Zhu et al.

Summary: The study utilized ultra-low-dose cryo-TEM to characterize the atomic-scale structure of organic-inorganic hybrid perovskite nanoplatelets, revealing the growth pattern and crystal structure evolution. Insights gained from atomic-scale investigations may have significant impacts on the development of battery materials and solar energy technologies.

ISCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Enabling Atomic-Scale Imaging of Sensitive Potassium Metal and Related Solid Electrolyte Interphases Using Ultralow-Dose Cryo-TEM

Qing Zhang et al.

Summary: Potassium-based solid electrolyte interphases (SEIs) are more beam sensitive compared to lithium-based SEIs due to a smaller damage threshold. Cryogenic transmission electron microscopy (cryo-TEM) at ultralow doses reveals the chemical composition of potassium SEI, which consists of large inorganic brackets and amorphous phases. The choice of organic phosphate-based electrolyte solvents results in a thin and stable SEI layer for enhanced cycling performance, while carbonate ester-based electrolytes deplete potassium reserves through the formation of metastable products in the SEI. These findings offer insights for selecting optimal electrolytes for potassium batteries.

ADVANCED MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Surface-orientated platinum nanoparticles electrodeposited on a carbon substrate as a high performance electrocatalyst for glucose oxidation reaction in alkaline media

Behnam Moeini et al.

Summary: The electrode structure plays a crucial role in the glucose oxidation reaction. An optimized electrode can achieve higher current density and better electrocatalytic activity. Proper deposition order can reduce Pt loading and improve the formation of Pt particles on the electrode surface.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Probing the Na metal solid electrolyte interphase via cryo-transmission electron microscopy

Bing Han et al.

Summary: This study investigates the effect of fluoroethylene carbonate (FEC) on the solid electrolyte interphase (SEI) structure of a Na-metal electrode using cryo-TEM. The results demonstrate that FEC can stabilize the SEI, preventing further reactions between the electrolyte and the Na metal.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Physical

Single Cobalt Atoms Decorated N-doped Carbon Polyhedron Enabled Dendrite-Free Sodium Metal Anode

Yijuan Li et al.

Summary: Controlling the growth of sodium dendrites during sodium deposition and stripping processes is a significant challenge for high-performance sodium metal batteries (SMBs). By embedding single cobalt atoms into nitrogen-doped carbon electrodes, stable Na-philic sites are provided to guide uniform sodium deposition and prevent the growth of sodium dendrites. This work offers an effective solution to inhibit sodium dendrite growth and control sodium nucleation behavior at the atomic level, leading to the fabrication of high-safety and long-cycling SMBs.

SMALL METHODS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Atomic to Nanoscale Origin of Vinylene Carbonate Enhanced Cycling Stability of Lithium Metal Anode Revealed by Cryo-Transmission Electron Microscopy

Yaobin Xu et al.

NANO LETTERS (2020)

Add to Collection

Article Chemistry, Physical

Enabling high-performance sodium metal anodes via A sodiophilic structure constructed by hierarchical Sb2MoO6 microspheres

Xuan Lu et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Physical

Spherical sodium metal deposition and growth mechanism study in three-electrode sodium-ion full-cell system

Hongfei Yao et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Electrochemistry

Sodium metal anodes: Deposition and dissolution behaviour and SEI formation

Magdalena Mandl et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Tunable MXene-Derived 1D/2D Hybrid Nanoarchitectures as a Stable Matrix for Dendrite-Free and Ultrahigh Capacity Sodium Metal Anode

Jianmin Luo et al.

NANO LETTERS (2020)

Add to Collection

Review Chemistry, Physical

Review of Emerging Concepts in SEI Analysis and Artificial SEI Membranes for Lithium, Sodium, and Potassium Metal Battery Anodes

Wei Liu et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Review Materials Science, Multidisciplinary

A review on recent approaches for designing the SEI layer on sodium metal anodes

Jisung Lee et al.

MATERIALS ADVANCES (2020)

Add to Collection

Article Electrochemistry

SEI Composition on Hard Carbon in Na-Ion Batteries After Long Cycling: Influence of Salts (NaPF6, NaTFSI) and Additives (FEC, DMCF)

J. Fondard et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Add to Collection

Article Chemistry, Physical

Toward a Stable Sodium Metal Anode in Carbonate Electrolyte: A Compact, Inorganic Alloy Interface

Xueying Zheng et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Stable Na Metal Anode Enabled by a Reinforced Multistructural SEI Layer

Zhixin Xu et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Mega High Utilization of Sodium Metal Anodes Enabled by Single Zinc Atom Sites

Tingzhou Yang et al.

NANO LETTERS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Regulating Lithium Nucleation via CNTs Modifying Carbon Cloth Film for Stable Li Metal Anode

Fanfan Liu et al.

SMALL (2019)

Add to Collection

Article Chemistry, Physical

Cryogenic Focused Ion Beam Characterization of Lithium Metal Anodes

Jungwoo Z. Lee et al.

ACS ENERGY LETTERS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Stable Na Plating and Stripping Electrochemistry Promoted by In Situ Construction of an Alloy-Based Sodiophilic Interphase

Shuai Tang et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Stabilizing a sodium-metal battery with the synergy effects of a sodiophilic matrix and fluorine-rich interface

Qidi Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Physical

Realizing a highly stable sodium battery with dendrite-free sodium metal composite anodes and O3-type cathodes

Huan Ye et al.

NANO ENERGY (2018)

Add to Collection

Article Multidisciplinary Sciences

Cryo-STEM mapping of solid-liquid interfaces and dendrites in lithium-metal batteries

Michael J. Zachman et al.

NATURE (2018)

Add to Collection

Review Chemistry, Physical

In Situ Techniques for Developing Robust Li-S Batteries

Ming Li et al.

SMALL METHODS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Nanoscale Nucleation and Growth of Electrodeposited Lithium Metal

Allen Pei et al.

NANO LETTERS (2017)

Add to Collection

Article Electrochemistry

On the Comparative Stability of Li and Na Metal Anode Interfaces in Conventional Alkyl Carbonate Electrolytes

D. I. Iermakova et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Add to Collection

Article Multidisciplinary Sciences

The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth

Weiyang Li et al.

NATURE COMMUNICATIONS (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Interconnected hollow carbon nanospheres for stable lithium metal anodes

Guangyuan Zheng et al.

NATURE NANOTECHNOLOGY (2014)

Add to Collection

Article Chemistry, Multidisciplinary

A safe and superior propylene carbonate-based electrolyte with high-concentration Li salt

Yuanlei Ding et al.

PURE AND APPLIED CHEMISTRY (2014)

Add to Collection

Article Materials Science, Multidisciplinary

The Interdependence model of grain nucleation: A numerical analysis of the Nucleation-Free Zone

Arvind Prasad et al.

ACTA MATERIALIA (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Towards high energy density sodium ion batteries through electrolyte optimization

Alexandre Ponrouch et al.

ENERGY & ENVIRONMENTAL SCIENCE (2013)

Add to Collection

Article Electrochemistry

Heterogeneous Nucleation and Growth of Lithium Electrodeposits on Negative Electrodes

David R. Ely et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Add to Collection

Article Electrochemistry

Nucleation of Electrodeposited Lithium Metal: Dendritic Growth and the Effect of Co-Deposited Sodium

Johanna K. Stark et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Add to Collection

Article Chemistry, Multidisciplinary

In search of an optimized electrolyte for Na-ion batteries

Alexandre Ponrouch et al.

ENERGY & ENVIRONMENTAL SCIENCE (2012)

Add to Collection

Article Electrochemistry

How Electrolytes Influence Battery Safety

E. Peter Roth et al.

ELECTROCHEMICAL SOCIETY INTERFACE (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Time-evolution of grain size distributions in random nucleation and growth crystallization processes

Anthony V. Teran et al.

PHYSICAL REVIEW B (2010)

Add to Collection

Article Chemistry, Analytical

Platinum nanostructured HOPG - Preparation, characterization and reactivity

Tine Bruelle et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2009)

Add to Collection

Article Engineering, Biomedical

Electrochemical processes of nucleation and growth of hydroxyapatite on titanium supported by real-time electrochemical atomic force microscopy

Noam Eliaz et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2007)

Add to Collection

Article Nanoscience & Nanotechnology

Single particle studies of the autocatalytic metal deposition onto surface-bound gold nanoparticles reveal a linear growth

Grit Festag et al.

NANOTECHNOLOGY (2007)

Add to Collection

Article Materials Science, Multidisciplinary

An analysis of the relationship between grain size, solute content, and the potency and number density of nucleant particles

M Easton et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)

Add to Collection

Article Chemistry, Multidisciplinary

Electrocrystallization of rhodium clusters on thiolate-covered polycrystalline gold

S Langerock et al.

LANGMUIR (2005)

Add to Collection

Article Chemistry, Multidisciplinary

XPS study of group IA carbonates

AV Shchukarev et al.

CENTRAL EUROPEAN JOURNAL OF CHEMISTRY (2004)

Add to Collection

Review Chemistry, Multidisciplinary

Nonaqueous liquid electrolytes for lithium-based rechargeable batteries

K Xu

CHEMICAL REVIEWS (2004)

Add to Collection

Article Chemistry, Physical

Influence of surface reaction rate on the size dispersion of interfacial nanostructures

RV Magan et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2003)

Add to Collection

Article Polymer Science

X-ray photoelectron spectroscopy study of the composition of polyphenol films formed on Pt by electropolymerisation of phenol in the presence of sulphide in carbonate medium

R Lapuente et al.

POLYMER JOURNAL (2003)

Add to Collection

Article Electrochemistry

Double-pulse technique as an electrochemical tool for controlling the preparation of metallic nanoparticles

M Ueda et al.

ELECTROCHIMICA ACTA (2002)

Add to Collection

Review Chemistry, Physical

Mesoscopic metal particles and wires by electrodeposition

RM Penner

JOURNAL OF PHYSICAL CHEMISTRY B (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.