☆ 4.7 Article

Experimental and numerical investigation of corroded cold-formed steel channel section columns subjected to in-plane compression and bending

OCEAN ENGINEERING (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Civil

Effect of corrosion on the buckling behaviour of cold-formed steel channel section columns under axial compression

Biao Nie et al.

Summary: This paper presents an experimental and numerical investigation on the buckling behaviour of corroded cold-formed steel (CFS) channel section columns under axial compression. The study discusses the effects of corrosion on the failure modes, load-strain curves, and load-axial displacement curves of the columns. It also proposes a calculation method for corroded CFS channel section columns based on the corrosion morphology.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2023)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Surface characteristic of corroded cold-formed thin-walled steel in industrial environments

Li Fan et al.

Summary: This study investigates the evolution law of surface characteristic of corroded cold-formed thin-walled steel in industrial environments. Five test specimens sourced from cold-formed thin-walled C-shaped steel were subjected to surface characteristic test. The results show that the evolution law of the surface morphology of corroded cold-formed thin-walled steel and corroded hot-rolled steel is similar, and the surface parameters are related to the average corrosion depth.

ANTI-CORROSION METHODS AND MATERIALS (2023)

Add to Collection

Article Engineering, Civil

Experimental testing, computational analysis and analytical formulation for the remaining capacity assessment of bridge plate girders with naturally corroded ends

G. Tzortzinis et al.

Summary: This paper evaluates the residual load carrying capacity of aging bridges with corrosion-deteriorated ends using experimental, computational and numerical methods. It also develops analytical tools and equations for evaluating the residual strength of plate girders.

ENGINEERING STRUCTURES (2022)

Add to Collection

Article Engineering, Civil

Compressive behaviour of corroded thin-walled circular section steel stub columns

Song Sha-Sha et al.

Summary: This research experimentally and numerically investigates the influences of corrosion on the buckling behaviour and bearing capacity of circular section steel tubular (CST) stub columns subjected to axial compression. A novel method considering the natural morphology of surface corrosion is proposed and verified. The study also reveals that the rough surface of corroded specimens leads to non-uniform stress distribution and changes in the buckling mode. The proposed design formula can accurately predict the axial compression strength of rusty stub columns.

THIN-WALLED STRUCTURES (2022)

Add to Collection

Review Engineering, Civil

A critical review of cold-formed steel seismic resistant systems: Recent developments, challenges and future directions

Maryam Hasanali et al.

Summary: Cold-formed steel (CFS) systems are widely used in the construction of low-to mid-rise buildings due to their advantages such as low weight, ease of construction, recyclability, and low carbon emissions. However, designing lateral force-resisting systems (LFRS) for CFS multi-story buildings is challenging. This paper provides a comprehensive review of the research developments in CFS braced-wall systems and moment-resisting frames, summarizing their load capacity, stiffness, energy dissipation capacity, and failure mode. The findings suggest that CFS LFRSs offer efficient design solutions with high ductility and energy dissipation capacity, but further research is needed.

THIN-WALLED STRUCTURES (2022)

Add to Collection

Article Engineering, Ocean

Shear capacity of H-shaped steel beam with randomly located pitting corrosion

Zhongwei Zhao et al.

Summary: This study focuses on the influence of corrosion on the shear capacity of H-shaped steel beams, proposing a relationship between shear capacity and mass loss ratio, and presenting an analytical method for predicting the residual shear capacity of corroded steel beams. The results show high accuracy in predicting the shear capacity of H-shaped steel beams with corroded web, making the proposed method applicable for different material strengths.

APPLIED OCEAN RESEARCH (2021)

Add to Collection

Article Engineering, Civil

Mechanical behavior of locally corroded circular steel tube under compression

Yuan Wei et al.

Summary: Localized corrosion can significantly reduce the load carrying capacity and safety performance of steel structures. A calculation method was proposed based on experimental and numerical studies to predict the load carrying capacity of locally corroded circular steel tubes under compression. Factors affecting the degradation of load carrying capacity and stiffness of localized corrosion specimens were identified.

STRUCTURES (2021)

Add to Collection

Article Construction & Building Technology

Comparative assessment of mechanical properties of HPS between electrochemical corrosion and spray corrosion

Linfa Xiao et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Engineering, Civil

Random field modelling of mechanical behaviour of corroded thin steel plate specimens

Krzysztof Woloszyk et al.

ENGINEERING STRUCTURES (2020)

Add to Collection

Article Engineering, Marine

An enhanced method in predicting tensile behaviour of corroded thick steel plate specimens by using random field approach

Krzysztof Woloszyk et al.

OCEAN ENGINEERING (2020)

Add to Collection

Article Engineering, Civil

Local and post-buckling behavior of corroded axially-compressed steel columns

Zongxing Zhang et al.

THIN-WALLED STRUCTURES (2020)

Add to Collection

Article Engineering, Marine

Experimental and numerical study on ultimate strength of steel tubular members with pitting corrosion damage

Renhua Wang et al.

MARINE STRUCTURES (2019)

Add to Collection

Article Engineering, Civil

Challenges and solutions associated with the simulation and design of cold-formed steel structural systems

P. Kyvelou et al.

THIN-WALLED STRUCTURES (2019)

Add to Collection

Article Construction & Building Technology

Effect of cleaned corrosion surface topography on mechanical properties of cold-formed thin-walled steel

Shanhua Xu et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Ultimate strength assessment of plated steel structures with random pitting corrosion damage

Renhua Wang et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2018)

Add to Collection

Article Construction & Building Technology

Experimental investigation of cold-formed steel built-up closed section columns with web stiffeners

Jia-Hui Zhang et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2018)

Add to Collection

Article Engineering, Civil

Experimental investigation and finite element analysis of web-stiffened cold formed lipped channel columns with batten sheets

Xuhong Zhou et al.

THIN-WALLED STRUCTURES (2018)

Add to Collection

Article Engineering, Marine

Experimental and numerical strength assessment of stiffened plates subjected to severe non-uniform corrosion degradation and compressive load

Y. Garbatov et al.

SHIPS AND OFFSHORE STRUCTURES (2017)

Add to Collection

Article Engineering, Civil

Experimental investigation of short steel columns with localized corrosion

Hossein Karagah et al.

THIN-WALLED STRUCTURES (2015)

Add to Collection

Article Engineering, Civil

Numerical investigation of H-shaped short steel piles with localized severe corrosion

Cheng Shi et al.

ENGINEERING STRUCTURES (2014)

Add to Collection

© Peeref 2019-2024. All rights reserved.