Related references
Note: Only part of the references are listed.
Article
Chemistry, Applied
Xin Shu et al.
Summary: This study investigated the feasibility of using rhamnolipid-stabilized nanostructured lipid carrier as a particulate filler and its impact on the properties of a composite hydrogel. The results showed that the addition of RNLC improved the texture and rheological properties of the hydrogel, but higher filling levels made the hydrogel more rigid and brittle.
FOOD HYDROCOLLOIDS
(2023)
Article
Chemistry, Physical
Cheng Liu et al.
Summary: This study successfully fabricated Au nanoparticles (NPs)-decorated defective DUT-67(Zr) (Au@DUT-67(Zr)) photocatalyst with enlarged channels, achieving 7.5 times higher conversion than Au NPs-decorated UiO-66(Zr) (Au@UiO-66(Zr)) for selective photocatalytic oxidation of amines to imines driven by visible light. The partially hollow structure of DUT-67(Zr) enables effective fixation of Au NPs. Au@DUT-67(Zr) possesses more active sites including unsaturated Zr atoms and oxygen vacancies (VO) compared to Au@UiO-66(Zr). In situ Fourier transform infrared (FTIR) spectrum reveals the activation of benzylamine on unsaturated Zr sites and the capturing of plasmonic hot electrons by VO, enhancing the formation of superoxide radical (O-.(2)) and achieving selective oxidation of benzylamine. A possible synergetic mechanism combining plasmon with molecular activation is presented.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2023)
Article
Chemistry, Applied
Yonghui Jin et al.
Summary: MIL-53(Fe)/chitosan composite hydrogel spheres were prepared by coating chitosan on MIL-53(Fe). The structural and physicochemical properties were characterized, and adsorption properties were analyzed under different conditions. The results showed high adsorption capacity for CR, reaching 590.8 mg g-1 at 298 K. The adsorption efficiency for CR was high, with 99.97% removal achieved when using 100 mg L-1 CR solution. The adsorption mechanism was mainly attributed to pore filling, ionic interactions, and hydrogen bonding.
MICROPOROUS AND MESOPOROUS MATERIALS
(2023)
Article
Materials Science, Multidisciplinary
Chun Liu et al.
Summary: This study investigated the potential of nano-attapulgite (nano-ATP)/GelMA composite hydrogels for bone tissue engineering. The incorporation of nano-ATP improved the printability and mechanical properties of the hydrogels, resulting in enhanced bone regeneration and angiogenesis. This research highlights the clinical practicality of nano-ATP for bone defect repair.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
(2023)
Article
Engineering, Chemical
Lanfen Chen et al.
Summary: Three dimensional composite hydrogels have been developed for solar-driven interfacial evaporation, addressing the challenges of high-performance hydrogel evaporators in terms of mechanical properties, evaporation efficiency, and durability. The composite hydrogel evaporator, with uniformly dispersed acidified carbon nanotubes (ACNTs), exhibits excellent mechanical properties and has high evaporation rate and photothermal conversion efficiency. It demonstrates outstanding salt rejection performance and long-term durability, making it a promising candidate for solar desalination applications.
CHEMICAL ENGINEERING SCIENCE
(2023)
Article
Biochemistry & Molecular Biology
Honglin Zhu et al.
Summary: Chitosan (CS)/carboxymethyl cellulose (CMC) porous hydrogels crosslinked by epichlorohydrin and with polyethylene glycol (PEG) as a pore-forming agent were synthesized for removal of anionic (Congo red, CR) and cationic (methylene blue, MB) dyes from aqueous solutions. The addition of PEG significantly increased the adsorption of CR and MB, with optimal performance observed for hydrogels prepared with 2% CS and 2% CMC (CS2/CMC2). The adsorption processes followed pseudosecond-order and pseudo-first-order kinetics models for CR and MB, respectively. Freundlich and Langmuir models were suitable for describing the adsorption isotherms of CR and MB, respectively. The thermodynamic study confirmed that the adsorption of CR and MB by the hydrogels was spontaneous, with CR adsorption being endothermic and MB adsorption being exothermic.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
(2023)
Article
Polymer Science
Luis M. Araque et al.
Summary: Two responsive PEI hydrogels (P1.5E and P2E) with different cross-linking degrees were synthesized using a click reaction and without organic solvents. The hydrogel's swelling and rheological behavior were dependent on the cross-linking degree, and the hydrogels showed stimuli-responsive behavior to pH or ionic strength changes. The hydrogels also exhibited adsorption capacity for methyl orange (MO) dye and Cu2+ ions, with P1.5E showing higher sorption capacities. Germination experiments with lettuce seeds confirmed that the hydrogels did not release toxic molecules.
JOURNAL OF APPLIED POLYMER SCIENCE
(2023)
Article
Green & Sustainable Science & Technology
Jingxin Yang et al.
Summary: The commonly-used peroxymonosulfate (PMS) activator (copper oxide nanoparticles, CuO NPs) was loaded on a polydopamine (PDA)/polyethyleneimine (PEI)-modified non-woven fabric (NWF) membrane. The hybrid membrane (CuO@PDA/PEI-NWF) showed excellent ability in oxidizing the high-toxic p-nitrophenol (4-NP) in feed. The cyclic membrane catalysis system displayed high-efficiency and long-effectiveness in treating the 4-NP polluted real water.
JOURNAL OF CLEANER PRODUCTION
(2023)
Article
Chemistry, Physical
Heyu Sun et al.
Summary: In this study, a hydrogel with chitosan/sodium alginate/calcium ion physical cross-linked double network structure was prepared using a semi-dissolution acidification sol-gel transition method. Hyperbranched polyamide-amine was introduced to improve the adsorption capacity of the hydrogel. Experimental results showed that the third-generation hyperbranched polyamide-amine hydrogel exhibited the best comprehensive performance, with high adsorption capacities for copper ions and cadmium ions.
APPLIED SURFACE SCIENCE
(2023)
Article
Chemistry, Applied
Zhi Chen et al.
Summary: In this study, a polyethyleneimine-modified chitosan/Ce-UIO-66 composite hydrogel (PEI-CS/Ce-UIO-66) was successfully prepared using the ex-situ blend method. The synthesized composite hydrogel was characterized and its adsorption performance for methyl orange (MO) was evaluated. The results showed that PEI-CS/Ce-UIO-66 exhibited excellent adsorption properties for MO through electrostatic interaction, pi-pi stacking, and hydrogen bonding. These findings suggest that the PEI-CS/Ce-UIO-66 composite hydrogel has potential for the adsorption of anionic dyes.
CARBOHYDRATE POLYMERS
(2023)
Article
Engineering, Environmental
L. Sellaoui et al.
Summary: This study used lignin as a precursor to synthesize activated carbons and compared their properties. The best adsorbent was used to remove acetaminophen and acetamiprid from water. Statistical physics models were used to analyze the adsorption mechanisms, and a double layer adsorption model was found to be the most effective in explaining the removal of these organic molecules.
CHEMICAL ENGINEERING JOURNAL
(2023)
Article
Chemistry, Physical
Khalil Ahmad et al.
Summary: Researchers have successfully synthesized two MOFs and demonstrated their excellent adsorption capacity for eliminating aromatic compounds in water. The adsorption process is spontaneous, endothermic, and influenced by various interactions.
ZEITSCHRIFT FUR PHYSIKALISCHE CHEMIE-INTERNATIONAL JOURNAL OF RESEARCH IN PHYSICAL CHEMISTRY & CHEMICAL PHYSICS
(2023)
Article
Materials Science, Textiles
Saleh Ahmed Aldahash et al.
Summary: Copper nanoparticles were synthesized from Trapa natans L. shells and incorporated into polyamide-12 as an adsorbent for the removal of methyl orange and brilliant green dyes. The nanocomposite was characterized and found to show high adsorption efficiency, which was affected by pH, time, and temperature. Langmuir isotherms and pseudo-second-order models provided a good fit for the adsorption isotherms and kinetics data, respectively. The nanocomposite exhibited a maximum adsorption capacity and showed potential for industrial-scale decolorization of wastewater.
JOURNAL OF NATURAL FIBERS
(2023)
Article
Chemistry, Multidisciplinary
Ainara Valverde et al.
Summary: In this study, the micro to nanoscale structure of PVDF-HFP@MOF membranes and their adsorption performance for Cr-VI are investigated. The different degrees of full encapsulation based on the PVDF-HFP processing and structuration from the macro to nanometer scale are observed. Furthermore, the functionalization of MOF nanoparticles with cysteine is studied to enhance their adsorption capacity toward Hg-II.
ADVANCED MATERIALS INTERFACES
(2023)
Article
Engineering, Environmental
Nnaemeka J. N. Nnaji et al.
Summary: Carbonized Dacryodes edulis leaf (CDEL) obtained at 250 degrees C was found to be an effective biosorbent for the removal of methylene blue (MB) dye from aqueous solutions. CDEL exhibited good adsorption performance and contained important nutritional elements. The study also showed that CDEL remained effective after multiple adsorption-desorption cycles, indicating its potential for recycling.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING
(2023)
Article
Engineering, Environmental
Ayelen F. Crespi et al.
Summary: The aim of this study was to propose the use of new heterogeneous catalysts based on montmorillonite materials to remove emerging pollutants. The catalytic activity of the composites was demonstrated by their ability to degrade pollutants and produce non-toxic waste.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING
(2023)
Article
Chemistry, Physical
Mengyang Xu et al.
Summary: This paper investigates the photocatalytic reduction of CO2 using Pd nanosheets grown on the surface of DUT-67 to form a Schottky junction. The Schottky junction promotes efficient charge transfer, leading to a significantly higher CO yield compared to DUT-67. Additionally, the large specific surface area and improved light utilization rate contribute to the enhanced CO2 reduction efficiency.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2022)
Article
Engineering, Multidisciplinary
Dan Liu et al.
Summary: The BPP hydrogel is a highly stretchable, biocompatible, and antibacterial dressing that exhibits excellent wound closure effectiveness, offering complete protection even in special scenarios. The research demonstrates the potential and clinical applicability of the BPP hydrogel in wound healing.
COMPOSITES PART B-ENGINEERING
(2022)
Article
Engineering, Environmental
Chirag Batukbhai Godiya et al.
Summary: This study presents a novel ecofriendly hydrogel for reliable and effective extraction of copper, zinc, and nickel ions from effluents, as well as catalytic performance for the transformation of 4-nitrophenol, providing a new approach for the remediation of heavy metal ions and 4-NP polluted effluents.
JOURNAL OF HAZARDOUS MATERIALS
(2022)
Article
Engineering, Environmental
Xiaoxue Zhao et al.
Summary: DUT-67/RGO aerogel photocatalysts with 3D macroscopic morphology were prepared by a hydrothermal and freeze-drying process. The aerogels exhibited strong adsorption/activation capacity for CO2 molecules, and the addition of RGO improved light energy utilization. The high selectivity and rate of CO2 reduction to CO were achieved at the gas-solid interface.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Chemistry, Physical
Ainara Valverde et al.
Summary: Metal chelators and porous sorbents are advanced technologies used for recovering metal ions from aqueous solutions. This study focuses on incorporating natural acids and amino acids into a zirconium-based metal-organic framework to enhance its adsorption properties. The amino acid-decorated MOF shows potential applications in water treatment and metal ion separation.
CHEMISTRY OF MATERIALS
(2022)
Article
Biochemistry & Molecular Biology
Zhilu Rao et al.
Summary: A strong and stable gelatin-based composite hydrogel was fabricated by incorporating amino-functionalized microfibrillated cellulose (AMFC) into the gelatin matrix. The addition of AMFC significantly improved the mechanical properties and structural stability of the gelatin hydrogel. The composite hydrogel exhibited excellent compressive strength and biocompatibility, making it promising for biomedical applications.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
(2022)
Article
Biochemistry & Molecular Biology
Mushtaq A. Bhat et al.
Summary: In this study, a smart multicomponent hydrogel with pH-responsive and self-healing properties was developed. The hydrogel exhibited unprecedented changes in viscoelasticity, stretchability, adhesiveness, and self-adaptability upon pH and concentration variations. By harnessing the dynamic nature of covalent and non-covalent interactions, the hydrogel's adhesive and stretchable properties were tuned in response to pH changes. The self-healing ability of the hydrogel was thoroughly investigated, showing 100% self-healing within a time frame of 2-6 min. The hydrogel's mechanical strength and stability were pH-dependent, with disintegration occurring above pH 7. The hydrogel's characteristics were characterized using FTIR, FESEM, and TGA analysis.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
(2022)
Article
Chemistry, Multidisciplinary
Alexandra Semenova et al.
Summary: The increasing demand for copper resources and the accompanying pollution have created an urgent need for effective materials for copper binding and extraction. This study investigates the interaction between copper ions and PEI-silica nanocomposite particles and precursor PEI microgels. The results show that PEI-silica composites have enhanced copper binding capacity compared to the parent microgels, and the presence of silica nanoparticles increases the number of copper-binding sites in the PEI network. The PEI-silica composites can be easily recycled by washing in nitric acid, allowing for multiple cycles of efficient copper removal and extraction.
Article
Green & Sustainable Science & Technology
Liberty L. Mguni et al.
Summary: This study synthesized a group of Ni-doped MOF absorbents using modulated synthesis method with formic acid modulator, which significantly increased the crystallinity and crystallite size of Ni-BDC materials. The modulated synthesis was found to enhance the overall adsorptive activity of Ni-BDC for model fuels, leading to almost twofold increase in activity and higher adsorption capacity for thiophene compared to dibenzothiophene and 4,6-dimethyl-dibenzothiophene.
JOURNAL OF CLEANER PRODUCTION
(2021)
Article
Chemistry, Physical
Khalil Ahmad et al.
Summary: A cobalt MOF with morpholine as the base named KIUB-MOF-1 was successfully synthesized and found to have a highly porous structure suitable for adsorptive elimination of contaminants. The removal of dyes followed a chemisorption mechanism, with electrostatic and hydrogen bonding responsible for dye elimination and high adsorption capacities. This study is the first to demonstrate the removal of organic dyes from brackish water using a morpholine-based MOF.
JOURNAL OF MOLECULAR STRUCTURE
(2021)
Article
Polymer Science
Zhen Zhang et al.
Summary: Smart self-healing sustainable hydrogels containing soy protein polymer and/or graphene nanoplatelets were fabricated using slime chemistry, exhibiting impressive self-healing behavior and high ductility under mechanical stimuli, pH modulation, and thermo sensitivity. The synergy between SPP and GNP contributed to improved mechanical properties and heat resistance, with an unexpected reinforcing effect and enhanced resistance to gel flowability.
Article
Chemistry, Multidisciplinary
Gabriel I. Tovar Jimenez et al.
Summary: Composites based on chitin biopolymer and metal-organic framework nanoparticles have been developed for pollutant absorption, offering high efficiency in retaining pollutants with diverse chemical properties, charges, and sizes. By enhancing the structure of CH/MOF composites, a unique combination of MOFs' chemical diversity and CH's processability and biocompatibility is achieved, opening up new application fields beyond water remediation.
Article
Food Science & Technology
Habib Ur Rehman Shah et al.
Summary: The study investigated the adsorptive removal of Malachite Green (MG) from water using Zeolitic Imidazolate framework/graphene oxide composites (ZIF67@GO), showing excellent results in terms of removal efficiency and reusability. The adsorption performance was well fitted with the pseudo second order kinetic model, indicating pi-staking and electrostatic association between ZIF-67@GO and MG molecules. Various factors affecting adsorption such as contact time, pH, adsorbent dose, quantity, and temperature were also determined.
FOOD AND CHEMICAL TOXICOLOGY
(2021)
Article
Chemistry, Applied
Marcella Matos Cordeiro Borges et al.
Summary: A novel magnetic and pH responsive composite hydrogel based on poly(2-(diethylamino)ethyl methacrylate)/chitosan was synthesized and investigated for fipronil removal from aqueous medium. The adsorbent showed high efficiency with an adsorption rate of 80% under optimal conditions of pH 4, 25 mg of adsorbent, and stirring for 60 s. The kinetic and isothermal models provided insights into the adsorption mechanism and demonstrated the potential for removing fipronil from wastewater.
REACTIVE & FUNCTIONAL POLYMERS
(2021)
Article
Chemistry, Physical
Jun Zhong et al.
Summary: This study introduces a novel type of fluorescent oxidized hyperbranched polyethylenimine (F-ohPEIs) nanoparticles with reduced toxicity, stable fluorescence emission, and selective response to cupric ion. This finding is expected to have promising applications in the field of biocompatible biomaterials for medical use.
COLLOID AND POLYMER SCIENCE
(2021)
Review
Chemistry, Physical
Choi Yee Foong et al.
JOURNAL OF MOLECULAR LIQUIDS
(2020)
Article
Chemistry, Physical
S. Sangeetha Margreat et al.
JOURNAL OF MOLECULAR STRUCTURE
(2020)
Article
Chemistry, Multidisciplinary
Yanyang Liu et al.
Article
Polymer Science
Akihide Sugawara et al.
POLYMER DEGRADATION AND STABILITY
(2020)
Review
Materials Science, Multidisciplinary
Ken Aldren S. Usman et al.
NPG ASIA MATERIALS
(2020)
Review
Materials Science, Multidisciplinary
Khalil Ahmad et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS
(2020)
Article
Chemistry, Physical
Hai-Xiong Liu et al.
JOURNAL OF MATERIALS CHEMISTRY A
(2020)
Review
Environmental Sciences
Carlos Pena-Guzman et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT
(2019)
Article
Chemistry, Analytical
P. Asgari et al.
MICROCHEMICAL JOURNAL
(2019)
Article
Chemistry, Multidisciplinary
Franziska Drache et al.
CRYSTAL GROWTH & DESIGN
(2018)
Article
Multidisciplinary Sciences
Franziska Drache et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES
(2017)
Article
Chemistry, Inorganic & Nuclear
Helge Reinsch et al.
EUROPEAN JOURNAL OF INORGANIC CHEMISTRY
(2016)
Article
Chemistry, Inorganic & Nuclear
Franziska Drache et al.
INORGANIC CHEMISTRY
(2016)
Article
Chemistry, Applied
Ki Chul Kim et al.
MICROPOROUS AND MESOPOROUS MATERIALS
(2016)
Article
Multidisciplinary Sciences
Kimberly A. Curtis et al.
Article
Polymer Science
Juan Manuel Lazaro-Martinez et al.
Article
Chemistry, Multidisciplinary
Gui-lin Zhuang et al.
Review
Neurosciences
Amit Pal et al.
Article
Biophysics
Thayyath Sreenivasan Anirudhan et al.
COLLOIDS AND SURFACES B-BIOINTERFACES
(2012)
Article
Geochemistry & Geophysics
Rifaqat Ali Khan Rao et al.
Article
Engineering, Environmental
CW Cheung et al.
Article
Engineering, Environmental
YS Ho et al.
Article
Biochemical Research Methods
BM Fung et al.
JOURNAL OF MAGNETIC RESONANCE
(2000)
