4.7 Article

Laser-induced manganese oxide/graphene composite electrodes with commercial-level mass loading towards high-performance supercapacitors

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

Embedding of conductive Ag nanoparticles among honeycomb-like NiMn layered double hydroxide nanosheet arrays for ultra-high performance flexible supercapacitors

Hucheng Fu et al.

Summary: In this study, honeycomb-like NiMn-layered double-hydroxide (NiMn-LDH) nanosheet arrays with numerous electron/ion channels, a large number of active sites, considerable redox reversibility, and significant electrical conductivity were synthesized. The synthesized nanosheets were used to fabricate a high-capacity binder-free electrode and a solid-state asymmetric supercapacitor (ASC) with ultrahigh energy density.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

Article Energy & Fuels

Carbon-Coated MnO Quantum Dot-Decorated Three-Dimensional Graphene Aerogel Composite for High-Performance Lithium-Ion Batteries

Ran Liu et al.

Summary: In this study, carbon-coated MnO quantum dots decorated on a graphene aerogel (C@MnO QDs/GA) were synthesized, combining the uniform distribution of ultra-small MnO QDs and the conducting GA with a 3D porous interconnected network structure. The C@MnO QDs/GA composite exhibited excellent electrochemical performance as anodes for Li-ion batteries, with high discharge capacity, cycling stability, and rate performance. These results suggest that the designed C@MnO QDs/GA materials have the potential to be used as high-performance anodes for next-generation alkali metal-ion batteries.

ENERGY & FUELS (2023)

Article Materials Science, Multidisciplinary

Nanoarchitectonics of fulvic acid based oxygen-rich hierarchical porous carbon with high specific surface area as supercapacitor electrodes

Hongping Li et al.

Summary: The modification of carbon material pore structure is crucial for improving the electrochemical performance of carbon electrodes. This study demonstrates a new method for preparing oxygen-rich hierarchical porous carbon by using fulvic acid as a carbon precursor and H2O2 oxidation followed by KOH activation. The resulting carbon material exhibits high specific capacitance and excellent cyclic stability as a supercapacitor electrode material.

MATERIALS CHEMISTRY AND PHYSICS (2023)

Review Engineering, Electrical & Electronic

Manganese (Sulfide/Oxide) based electrode materials advancement in supercapattery devices

Muhammad Imran et al.

Summary: Recently, manganese-based nanomaterials have received much attention in energy storage devices due to their high conductivity, porous structure, cost-effectiveness, and environmental friendliness. This review provides a comprehensive study on the synthesis methods and energy storage mechanisms of manganese-based electrode materials. It also discusses the composites with other materials to enhance the performance. Furthermore, it summarizes the recent developments in sulfides/oxide-based electrode materials for supercapattery devices as a potential alternative for high-performance batteries or supercapacitors.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2023)

Article Forestry

The Optimization of Thermo-Mechanical Densification to Improve the Water Resistance of Outdoor Bamboo Scrimber

Xiaoxia Wang et al.

Summary: The water resistance of outdoor bamboo scrimber is greatly influenced by the hot-pressing temperature during thermo-mechanical densification. This study investigated the effects of temperature on the failure mode, density profile, and chemical components of bamboo scrimber, providing theoretical support for optimizing its outdoor applications. X-ray density profiler was used to measure the vertical density profiles, while extended depth-of-field 3D microscopy and field emission scanning electron microscopy recorded the response of cells and bonding interfaces to water absorption. X-ray diffraction, Fourier-transform infrared spectroscopy, and X-ray photoelectron spectroscopy were used to evaluate the composition.

FORESTS (2023)

Article Energy & Fuels

High-performance nickel molybdate/reduce graphene oxide/polypyrrole ternary nanocomposite as flexible all-solid-state asymmetric supercapacitor

Reza Ghanbari et al.

Summary: Ternary nanocomposites of nickel molybdate/reduced graphene oxide/polypyrrole (NiMoO4/rGO/PPy) are prepared as the active material of flexible supercapacitor electrodes. Different morphologies of hydrated and non-hydrated nickel molybdate are formed by treating the binary nanohybrid at different temperatures. The ternary nanocomposite, annealed at 450 degrees C (NiMoO4/rGO-450/PPy), exhibits a high specific capacitance and the flexible all-solid-state asymmetric supercapacitor device shows excellent electrochemical performance.

JOURNAL OF ENERGY STORAGE (2023)

Article Engineering, Environmental

In situ generation of CeCoSx bimetallic sulfide derived from ?egg-box? seaweed biomass on S/N co-doped graphene aerogels for flexible all solid-state supercapacitors

Hanwen Guo et al.

Summary: In this study, 3D CeCoSx-SA/GF porous aerogels based on sodium alginate were designed and prepared, which possess a special structure and excellent electrochemical performance, showing promising applications in flexible energy storage devices.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Engineering, Environmental

Ultralight coaxial fiber-shaped zinc-ion hybrid supercapacitor with high specific capacitance and energy density for wearable electronics

Ruixue Li et al.

Summary: By using a graphene/multi-walled carbon nanotubes (MWCNTs) hybrid tube (GMHT) as cathode and a 2D nanostructured Zn modified graphene/MWCNTs tube (Zn@GMHT) as anode, a 'sword-scabbard' like fiber-shaped all-solid-state zinc-ion hybrid supercapacitor (ZHS) was successfully fabricated. The optimized GMHT//Zn@GMHT ZHS exhibited excellent length specific capacitance and energy densities, as well as impressive capacitance retention and mechanical flexibility. This innovative architecture and ultralight function endow GMHT//Zn@GMHT with promising prospects in wearable applications.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Electrochemistry

Decoration of laser induced graphene with MXene and manganese oxide for fabrication of a hybrid supercapacitor

Marco Reina et al.

Summary: The rise of the Internet of Things has led to a high demand for small energy storage devices, with laser-induced graphene serving as a promising material for producing flexible micro-supercapacitors. By decorating the surface through electrophoresis, the performance of a LIG supercapacitor can be improved.

ELECTROCHIMICA ACTA (2023)

Article Engineering, Environmental

Permanganate activation with Mn oxides at different oxidation states: Insight into the surface-promoted electron transfer mechanism

Lu Ma et al.

Summary: This study has found that manganese oxides with high oxidation states, including γ-MnOOH, α-Mn2O3, and α-MnO2, exhibited excellent performance in degrading phenols and antibiotics when combined with KMnO4. The MnO4- species formed stable complexes with Mn(III/IV) species on the surface, leading to increased oxidation potential and electron transfer reactivity. In contrast, MnO and γ-Mn3O4 with Mn(II) species reacted with KMnO4 to produce cMnO2 with low activity for phenol degradation. These findings provide insight into the development of Mn-based catalysts for organic pollutant degradation via KMnO4 activation.

JOURNAL OF HAZARDOUS MATERIALS (2023)

Article Engineering, Chemical

Spontaneously dissolved MnO: A better cathode material for rechargeable aqueous zinc-manganese batteries

Yonghang Liu et al.

Chemical Engineering Journal (2023)

Article Energy & Fuels

Corn-straw-converted activated carbons with tunable porosity and N/O functionalities as high-performance supercapacitors electrode at commercial-level mass loading

Qinglong Zou

Summary: Through hydrothermal and activation processes, low-cost and high-performance activated carbon materials with tailorable porous structure and heteroatom doping are synthesized from corn straw, which have significant scientific importance and industrial demand for supercapacitors. The porous structure is mainly adjusted by KOH/biochar mass ratio, while O and N surface functionalities are tuned by high-temperature treatment using H2O or ammonia. The influences of porosity on the introduced N contents are investigated, and the electrochemical performances of the corn-straw-derived activated carbons are examined. The cost-effective technique route provides guidance for the design and preparation of biomass-derived activated carbons with tunable porosity and heteroatom functionalities for practical applications in supercapacitors.

JOURNAL OF ENERGY STORAGE (2023)

Review Energy & Fuels

Recent advances on the manganese cobalt oxides as electrode materials for supercapacitor applications: A comprehensive review

Xuming Du et al.

Summary: In the past decade, there has been great attention on electrochemical energy storage devices in various fields such as smart portable electronics and hybrid electric vehicles. Supercapacitors are considered promising candidates due to their high power density, long lifespan, and low production cost. This review summarizes and discusses the progress in the synthesis methods and structure control of manganese cobalt oxides-based materials, as well as the strategies to enhance their electrochemical performances, including structural design, morphological control, and composite engineering. Potential challenges and effective strategies for future research direction and development of manganese cobalt oxides-based electrode materials are also proposed.

JOURNAL OF ENERGY STORAGE (2023)

Article Chemistry, Physical

Effective design of MnO2 nanoparticles embedded in laser-induced graphene as shape-controllable electrodes for flexible planar microsupercapacitors

Rongqing Xu et al.

Summary: A novel laser direct writing process was developed to design planar microsupercapacitors with MnO2 nanoparticles embedded in laser-induced graphene on flexible substrates, achieving outstanding performance. The effective design of pseudocapacitive MnO2 nanoparticles embedded in highly conductive LIG with 3D porous structure enabled excellent modular integration and flexibility.

APPLIED SURFACE SCIENCE (2022)

Article Chemistry, Multidisciplinary

One-step fabrication of nitrogen-doped laser-induced graphene derived from melamine/polyimide for enhanced flexible supercapacitors

Shuai Han et al.

Summary: This study demonstrates a facile and expandable method for in situ fabrication of nitrogen-doped laser-induced graphene (N-LIG), which successfully enhances the capacitive performance of graphene electrodes. The N-LIG electrode exhibits desirable specific areal capacitance and good flexibility, laying a foundation for industrial production.

CRYSTENGCOMM (2022)

Article Chemistry, Physical

Electrodeposited with FeOOH and MnO2 on laser-induced graphene for multi-assembly supercapacitors

Xinzhi Sun et al.

Summary: The study demonstrated a two-step method to prepare integrated electrode materials for supercapacitors, leading to the successful fabrication of a device with high areal capacitance, energy density, and power density.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Acoustics

Ultrasound-assisted facile one-pot synthesis of ternary MWCNT/MnO2/rGO nanocomposite for high performance supercapacitors with commercial-level mass loadings

Bhaskar J. Choudhury et al.

Summary: In this study, a ternary nanocomposite with commercial-level mass loading was developed for supercapacitors, demonstrating high capacitive performance and cycle life. The nanocomposite was synthesized using a facile ultrasound-assisted one-pot method, resulting in a porous ternary structure with efficient ion diffusion channels and high electrochemically active surface area.

ULTRASONICS SONOCHEMISTRY (2022)

Article Chemistry, Physical

Synthesis of flower-like manganese oxide for accelerated surface redox reactions on nitrogen-rich graphene of fast charge transport for sustainable aqueous energy storage

Jong Hyeong Lim et al.

Summary: Water-based asymmetric hybrid capacitors (AHCs) have emerged as promising energy storage devices that combine the Faraday reaction and electric double layer phenomenon. A flower-like structure of manganese oxide on a nitrogen-doped graphene matrix is synthesized by effectively coordinating a metal cation on the nitrogen sites of a doped graphene matrix. This new material in combination with activated carbon delivers high specific energy and stable cycling performance.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Nanoscience & Nanotechnology

Ternary NiCeCo-Layered Double Hydroxides Grown on CuBr2@ZIF-67 Nanowire Arrays for High-Performance Supercapacitors

Hucheng Fu et al.

Summary: In this study, a NiCeCo-layered double hydroxide-chlorine-bridged compound was successfully synthesized and demonstrated excellent electrochemical performance in a binder-free electrode. The unique structure and complex assembly of the electrode resulted in remarkable capacitance and low internal resistance, allowing for high energy density in an all-solid-state supercapacitor when assembled with activated carbon electrodes. The supercapacitor enabled continuous operation of a multifunctional display for over three and a half hours.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Nanoscience & Nanotechnology

N-doped carbon coated porous hierarchical MnO microspheres as superior additive-free anode materials for lithium-ion batteries

Ye Hong et al.

Summary: Novel N-doped carbon coated porous hierarchical MnO microspheres have been successfully synthesized via simultaneous pyrolysis of MnCO3 and polyacrylonitrile (PAN) at low calcination temperature. The micro/nano structure with uniform N-doped carbon coating, suitable interior pores, and tiny primary MnO nanocrystals significantly enhance the electronic conductivity, reduce the irreversible solid-electrolyte interphase (SEI) layer, accommodate volume changes, and enable easier redox reactions, resulting in high reversible capacity and remarkable long-term cycling stability.

SCRIPTA MATERIALIA (2022)

Article Energy & Fuels

Laser direct writing of graphene/MnO-Mn3O4 doped with sulfur for high-performance microsupercapacitors

Meng Gao et al.

Summary: This study successfully prepared graphene/manganese oxide nanocomposites as electrode materials for microsupercapacitors using a laser direct-writing method. The synthesized materials showed hierarchical porous structure and uniform distribution of nanoparticles, exhibiting excellent electrochemical performance, reliable cycling stability, and mechanical flexibility.

JOURNAL OF ENERGY STORAGE (2022)

Article Chemistry, Physical

Synthesis, characterization, and magnetic properties of Mn nanoferrites

Reda E. El-Shater et al.

Summary: Nanoparticles of Mn ferrite were successfully prepared by co-precipitation method, and the substitution of Mn ions resulted in enhanced magnetic properties.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Engineering, Environmental

Reduced graphene oxide as a charge reservoir of manganese oxide: Interfacial interaction promotes charge storage property of MnOx-based micro-supercapacitors

Segi Byun et al.

Summary: A hybrid film of rGO and K-MnOx has been developed to increase the energy density of micro-supercapacitors. This hybrid film exhibits high volumetric capacitance and long cycle life, serving as a stepping stone for designing novel hybrid devices with high energy storage capabilities.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Energy & Fuels

Rose-like ZnNiCo layered double hydroxide grown on Co3O4 nanowire arrays for high energy density flexible supercapacitors

Hucheng Fu et al.

Summary: By using a two-step hydrothermal method and a calcination process, hierarchical rose-like CC@Co3O4/ZNC-LDH nanowire composites were synthesized on carbon cloth. These composites exhibit excellent electrochemical properties and ideal capacitance retention.

JOURNAL OF ENERGY STORAGE (2022)

Article Chemistry, Inorganic & Nuclear

Synthesis and Characterization of Composites with Y-Hexaferrites for Electromagnetic Interference Shielding Applications

Sajjad Ahmad Khan et al.

Summary: The current research focuses on the chemical process and characterization of Co-based Y-type hexaferrite, electrochemically active polypyrrole doped with dodecylbenzene sulphonicacid (PPy-DBSA), and their composites. The microemulsion technique was used to produce Sr2Co2Fe12O22 hexaferrite, which exhibited semiconductor properties. Moreover, the composite PPY/DBSA + Sr2Co2Fe12O22 showed excellent performance in electromagnetic radiation shielding.

MAGNETOCHEMISTRY (2022)

Article Electrochemistry

One step strategy for reduced graphene oxide/cobalt-iron oxide/polypyrrole nanocomposite preparation for high performance supercapacitor electrodes

Saira Ishaq et al.

Summary: The aim of the study was to fabricate high-energy density supercapacitor electrodes. Binary composite of rGO/CoFe2O4 and ternary composite of rGO/CoFe2O4/PPy were synthesized to improve the capacitance and energy density of the supercapacitors. The results showed a simple fabrication method of binary and ternary nanocomposites and the synergistic influence of participating components on electrode performance for high gravimetric and areal capacitances, as well as high energy and power densities.

ELECTROCHIMICA ACTA (2022)

Article Chemistry, Multidisciplinary

Surface Engineering of Ni wires and Rapid Growth Strategy of Ni-MOF Synergistically Contribute to High-Performance Fiber-Shaped Aqueous Battery

Jiaxu Gong et al.

Summary: A substrate is effectively constructed for the growth of active materials via a Ni wire etching strategy, and core-shell structured nanorod arrays exhibit high capacity and outstanding cycling stability as electrodes.

SMALL (2022)

Article Chemistry, Multidisciplinary

Cobalt vanadium chalcogenide microspheres decorated with dendrite-like fiber nanostructures for flexible wire-typed energy conversion and storage microdevices

Leila Naderi et al.

Summary: This study reports the preparation of flower-like cobalt vanadium selenide/nickel copper selenide microspheres and demonstrates their excellent performance in flexible fiber microsupercapacitors and overall water splitting. The microspheres exhibit a unique three-dimensional structure and show high electrochemical properties, as well as high voltage and stability in the electrolysis cell.

NANOSCALE (2022)

Article Materials Science, Multidisciplinary

Preparation of porous graphitic carbon and its dual-ion capacitance energy storage mechanism

Chang-Zhen Zhan et al.

Summary: This paper introduces a novel dual-ion hybrid capacitance energy storage mechanism, which combines the advantages of lithium-ion capacitors and dual-ion batteries through a specially designed porous graphitic carbon. The results demonstrate that the energy storage performance of this material is significantly improved.

NEW CARBON MATERIALS (2022)

Article Materials Science, Composites

Synergies of vertical graphene and manganese dioxide in enhancing the energy density of carbon fibre-based structural supercapacitors

Zhao Sha et al.

Summary: The study introduces a technique for increasing the capacitance of carbon fiber electrodes by hybridizing VG and MnO2, resulting in enhanced areal capacitance. The structural supercapacitor exhibits high energy density and mechanical properties, paving the way for the development of high-performance carbon fiber multifunctional composites.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Article Chemistry, Physical

SWCNT-bridged laser-induced graphene fibers decorated with MnO2 nanoparticles for high-performance flexible micro-supercapacitors

Min Yuan et al.

Summary: Hybrid nanocomposites of metal oxide nanoparticles and 3D graphene, particularly in the form of flexible micro-supercapacitors, show superior performance due to the synergistic effect between conductive SWCNT-bridged LIGF network and high theoretical capacitance of MnO2 nanoparticles. These hybrid electrodes offer a facile and novel method to develop flexible energy storage devices with high performance, indicating great potential for various wearable electronics applications in the future.

CARBON (2021)

Review Engineering, Environmental

Review on recent progress in hydrothermally synthesized MCo2O4/rGO composite for energy storage devices

O. C. Pore et al.

Summary: Hydrothermal synthesis is a commonly used method for synthesizing nanomaterials with controlled morphologies, and MCo2O4 and their graphene-based composites are considered promising electrode materials in the field of supercapacitors.

CHEMICAL ENGINEERING JOURNAL (2021)

Review Polymer Science

A Review of Recent Progress on Nano MnO2: Synthesis, Surface Modification and Applications

Ayonbala Baral et al.

Summary: Nano manganese dioxide (MnO2) is widely used in energy, gas sensing, biological applications, and wastewater remediation due to its superior performance. Research shows that structure stabilization and performance improvement of nano MnO2 can be achieved by doping or forming composites with metals, carbon materials, and conductive polymers.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2021)

Article Energy & Fuels

Laser direct preparation and processing of graphene/MnO nanocomposite electrodes for microsupercapacitors

Meng Gao et al.

Summary: A one-step picosecond laser direct-writing method is proposed to synthesize graphene/MnO nanocomposites and process interdigital electrodes for microsupercapacitors, achieving a high specific capacitance of 470 mF cm(-2). The symmetric microsupercapacitors based on graphene/MnO interdigital electrodes exhibit excellent electrochemical performance, with a maximum energy density of 4.89 mu MTh cm(-2) and a maximum power density of 0.72 mW cm(-2). This approach also offers a way to synthesize other graphene/metal oxide nanocomposites for microsupercapacitors.

JOURNAL OF ENERGY STORAGE (2021)

Article Chemistry, Physical

Hierarchically structured electrodes for moldable supercapacitors by synergistically hybridizing vertical graphene nanosheets and MnO2

Yang Zhou et al.

Summary: A new approach to create hierarchically structured electrodes for supercapacitors allows them to retain capacity under mechanical deformation, enabling the fabrication of high-performance moldable energy storage devices for wearable electronics and wireless electronic skins.

CARBON (2021)

Article Environmental Sciences

Carbon emission of energy consumption of the electric vehicle development scenario

Minxi Wang et al.

Summary: The study shows that the carbon emissions of electric vehicles only account for 37.05% of traditional fuel vehicles, and the rapid growth of electric vehicles has brought significant impact on grid load. Studying the changes in CO2 emissions from energy substitution is significant for formulating the development strategy of the automobile industry and adjusting energy structure policies.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)

Article Materials Science, Multidisciplinary

Effect of doping of Ce4+/3+ on optical, strength and shielding properties of (0.5-x)TeO2-0.25MoO-0.25Bi2O3-xCeO2 glasses

A. L. Kozlovskiy et al.

Summary: The study explores the impact of dopant CeO2 concentrations on the efficiency of gamma radiation shielding using telluride glasses. Results show that increasing CeO2 concentration enhances glass density and decreases porosity, leading to improved shielding efficiency. The findings also indicate that doping with CeO2 can increase crack resistance, decrease glass degradation, and enhance resistance to degradation by 1.5-3 times depending on the dopant concentration.

MATERIALS CHEMISTRY AND PHYSICS (2021)

Article Chemistry, Physical

E-beam direct synthesis of macroscopic thick 3D porous graphene films

Shuai Han et al.

Summary: A novel strategy for synthesizing three-dimensional graphene was reported in this study, resulting in graphene films with abundant pore structures and desirable electrical conductivity. The films showed potential for large-scale applications and exhibited impressive performances in energy storage and photothermal deicing.

CARBON (2021)

Article Chemistry, Physical

α-MnO2 nanotube@δ-MnO2 nanoflake hierarchical structure on three-dimensional graphene foam as a lightweight and free-standing supercapacitor electrode

Mi He et al.

Summary: A hierarchical alpha-MnO2 nanotube@delta-MnO2 nanoflake structure was successfully fabricated on 3D graphene foam as a lightweight and free-standing electrode for supercapacitors. The composite electrode exhibited excellent electrochemical performance, with a maximum specific capacitance achieved at 60% MnO2 mass percentage. An asymmetric supercapacitor based on the GF@MNT@MNF composites showed a great energy density under a wide potential range.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Chemistry, Physical

Commercial-level mass-loading MnO2 with ion diffusion channels for high-performance aqueous energy storage devices

Yaxiong Zhang et al.

Summary: Transition metal oxides have shown renewed interest as promising electrode materials for high-performance electrochemical energy storage devices. The study found that MnO2 electrodes fabricated using a gassing-assisted electrodeposition method exhibit high areal capacitance and superior cycle stability, facilitating electrolyte ion diffusion and increasing accessible area for ion insertion/extraction during electrochemical reactions.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Materials Science, Multidisciplinary

Ni substitution effect on the structure, magnetization, resistivity and permeability of zinc ferrites

D. A. Vinnik et al.

Summary: Zn1-xNixFe2O4 ferrites were synthesized using solid state reactions and the sol-gel autocombustion technique, with the obtained samples exhibiting a spinel structure. The magnetic characteristics, Curie point variation, and electrical properties were determined for different compositions, showing a decrease in unit cell parameters with increasing nickel concentration. The composite samples with paraffin wax showed significant reductions in permeability.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Article Chemistry, Multidisciplinary

Laminated Laser-Induced Graphene Composites

John Tianci Li et al.

ACS NANO (2020)

Article Engineering, Environmental

Laser-induced MnO/Mn3O4/N-doped-graphene hybrid as binder-free anodes for lithium ion batteries

Chao Zhou et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Review Chemistry, Physical

The Development of Pseudocapacitor Electrodes and Devices with High Active Mass Loading

Ri Chen et al.

ADVANCED ENERGY MATERIALS (2020)

Review Engineering, Electrical & Electronic

Manganese oxides: promising electrode materials for Li-ion batteries and supercapacitors

A. U. Ubale et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)

Article Chemistry, Physical

Flexible and ITO-free asymmetric energy storage devices based on graphene/Ni(OH)2 nanocomposites

Eduardo G. C. Neiva et al.

APPLIED SURFACE SCIENCE (2020)

Article Materials Science, Multidisciplinary

Direct laser writing of MnO2 decorated graphene as flexible supercapacitor electrodes

Chenguang Zhu et al.

JOURNAL OF MATERIALS SCIENCE (2020)

Review Materials Science, Multidisciplinary

Research Progress of Graphene-Based Materials on Flexible Supercapacitors

Yongquan Du et al.

COATINGS (2020)

Article Energy & Fuels

Carbon nanocomposite electrodes for electrical double layer capacitor

Allan Daraghmeh et al.

JOURNAL OF ENERGY STORAGE (2020)

Article Chemistry, Multidisciplinary

Fe3O4 Nanoparticles for Complex Targeted Delivery and Boron Neutron Capture Therapy

Kanat Dukenbayev et al.

NANOMATERIALS (2019)

Article Nanoscience & Nanotechnology

MnO2 Nanoflowers Deposited on Graphene Paper as Electrode Materials for Supercapacitors

Omer Sadak et al.

ACS APPLIED NANO MATERIALS (2019)

Article Materials Science, Ceramics

Polarization origin and iron positions in indium doped barium hexaferrites

S. V. Trukhanov et al.

CERAMICS INTERNATIONAL (2018)

Article Nanoscience & Nanotechnology

In situ MoS2 Decoration of Laser-Induced Graphene as Flexible Supercapacitor Electrodes

Francesca Clerici et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Article Multidisciplinary Sciences

Laser-induced porous graphene films from commercial polymers

Jian Lin et al.

NATURE COMMUNICATIONS (2014)